The acceleration of flames in tube explosions with two obstacles as a function of the obstacle separation distance

The separation distance (or pitch) between two successive obstacles or rows of obstacles is an important parameter in the acceleration of flame propagation and increase in explosion severity. Whilst this is generally recognised, it has received little specific attention by investigators. In this work a vented cylindrical vessel 162 mm in diameter 4.5 m long was used to study the effect of separation distance of two low blockage (30%) obstacles. The set up was demonstrated to produce overpressure through the fast flame speeds generated (i.e. in a similar mechanism to vapour cloud explosions). A worst case separation distance was found to be 1.75 m which produced close to 3 bar overpressure and a flame speed of about 500 m/s. These values were of the order of twice the overpressure and flame speed with a double obstacle separated 2.75 m (83 characteristic obstacle length scales) apart. The profile of effects with separation distance was shown to agree with the cold flow turbulence profile determined in cold flows by other researchers. However, the present results showed that the maximum effect in explosions is experienced further downstream than the position of maximum turbulence determined in the cold flow studies. It is suggested that this may be due to the convection of the turbulence profile by the propagating flame. The present results would suggest that in many previous studies of repeated obstacles the separation distance investigated might not have included the worst case set up, and therefore existing explosion protection guidelines may not be derived from worst case scenarios.     

Prediction of distance to maximum intensity of turbulence generated by grid plate obstacles in explosion-induced flows

The interaction of unburnt gas flow induced in an explosion with an obstacle results in the production of turbulence downstream of the obstacle and the acceleration of the flame when it reaches this turbulence. Currently, there are inadequate experimental measurements of these turbulent flows in gas explosions due to transient nature of explosion flows and the connected harsh conditions. Hence, majority of measurements of turbulent properties downstream of obstacles are done using steady-state flows rather than transient flows. Consequently, an empirical based correlation to predict distance to maximum intensity of turbulence downstream of an obstacle in an explosion-induced flow using the available steady state experiments was developed in this study. The correlation would serve as a prerequisite for determining an optimum spacing between obstacles thereby determining worst case gas explosions overpressure and flame speeds. Using a limited experimental work on systematic study of obstacle spacing, the correlation was validated against 13 different test conditions. A ratio of the optimum spacing from the experiment, x_exp to the predicted optimum spacing, x_pred for all the tests was between 2-4. This shows that a factor of three higher than the x_pred would be required to produce optimum obstacle spacing that will lead to maximum explosion severity. In planning the layout of new installations, it is appropriate to identify the relevant worst case obstacle separation in order to avoid it. In assessing the risk to existing installations and taking appropriate mitigation measures it is important to evaluate such risk on the basis of a clear understanding of the effects of separation distance and congestion. It is therefore suggested that the various new correlations obtained from this work be subjected to further rigorous validation from relevant experimental data prior to been applied as design tools.     

LES – DFSD modelling of vented hydrogen explosions in a small-scale combustion chamber

Accidental explosions are a plausible danger to the chemical process industries. In the event of a gas explosion, any obstacles placed within the path of the flame generate turbulence, which accelerates the transient flame and raises explosion overpressure, posing a safety hazard. This paper presents numerical studies using an in-house computational fluid dynamics (CFD) model for lean premixed hydrogen/air flame propagations with an equivalence ratio of 0.7. A laboratory-scale combustion chamber is used with repeated solid obstacles. The transient compressible large eddy simulation (LES) modelling technique combined with a dynamic flame surface density (DFSD) combustion model is used to carry out the numerical simulations in three-dimensional space. The study presented uses eight different baffle configurations with two solid obstructions, which have area blockage ratios of 0.24 and 0.5. The flame speed, maximum rate of pressure-rise as well as peak overpressure magnitude and timing are presented and discussed. Numerical results are validated against available published experimental data. It is concluded that, increasing the solid obstacle area blockage ratio and the number of consecutive baffles results in a raised maximum rate of pressure rise, higher peak explosion overpressure and faster flame propagation. Future model development would require more experimental data, probably in a more congested configuration.     

Influence of built-in obstacles on unconfined vapor cloud explosion

The obstacle structure in the vapor cloud has a significant influence on the gas explosion. Obstacles could not only lead to the acceleration of flame, but also they may occupy some space, thus affecting the amount of combustible gas. In this paper, a new two-step method was proposed to respectively study the effects of the obstacles amount and volume blockage ratio (VBR) on the gas explosion by using Computation Fluid Dynamic software AutoReaGas, and the obstacles in the vapor cloud were set to “Solid” instead of “Subgrid”. Based on the results and analysis, it is found that the peak overpressure and the maximum combustion rate rise with the increase of the number of obstacles for a single VBR, which indicated that the vapor cloud explosion of more obstacles was more dangerous for a single VBR. However, under a single number of obstacles, the peak overpressure and the maximum combustion rate increase firstly and then decrease as VBR increases and reach the highest at the VBR of 0.74, which indicated that the intensity of vapor cloud explosion reach a peak at a certain VBR in the middle instead of the largest. In addition, the existence and structure of obstacles have little effect on the size of explosion fireball when the size and concentration of combustible gas cloud are the same.     

障碍物对瓦斯煤尘爆炸火焰传播规律的影响

为了进一步探究瓦斯煤尘耦合爆炸火焰的传播规律,用自行搭建的半封闭垂直管道爆炸试验系统,研究障碍物对瓦斯煤尘耦合爆炸火焰传播规律的影响。研究结果表明:障碍物能显著提高瓦斯煤尘爆炸火焰的传播速度,其加速机理主要是障碍物诱导的湍流区会促进火焰的传播;火焰在传播过程中的加速度不是一直增加,随着火焰速度的增加会出现上下波动;煤尘的加入会使瓦斯爆炸产生的火焰传播速度显著增大及速度的最大值距离点火端较远;通过障碍物时爆炸产生的火焰形状发生较大的改变,出现拉伸和褶皱现象。     

The effect of orifice plates with different shapes on explosion propagation of premixed methane–air in a semi-confined pipeline

The effect of internal shape of obstacles on the deflagration of premixed methane–air (concentration of 10%) was experimentally investigated in a semi-confined steel pipeline (with a square cross section size of 80 mm × 80 mm and 4 m long). The obstacles used in this study were circular, square, triangular and gear-shaped (4-teeth, 6-teeth and 8-teeth) orifice plates with a blockage ratio of 75%, and the perimeter of the orifice was regarded as a criterion for determining the sharpness of the orifice plate. The overpressure history, flame intensity histories, flame front propagation speed, maximum flame intensity and peak explosion overpressure were analyzed. The explosion in the pipeline can be divided into two stages: initial explosion and secondary explosion. The secondary explosion is caused by recoiled flame. The perimeter is positively related to the intensity of the recoiled flame and the ability of orifice plate to suppress the explosion propagation. In addition, the increase in the perimeter will cause the acceleration of the flame passing through the orifice plate, while after the perimeter of the orifice reaches a certain value, the effect of the increase in perimeter on explosion excitation becomes no obvious. The overpressure (static pressure) downstream of the orifice plate is the result of the combined effect of explosion intensity and turbulence. The increase in perimeter leads to the increase in turbulence downstream of the orifice plate which in turn causes more explosion pressure to be converted into dynamic pressure.     

大尺度障碍物与泄爆面对天然气内爆炸的协同作用规律研究

为阐释民用建筑内部大尺度物品与门窗等泄爆面对天然气爆炸灾害的协同作用机制,基于典型厨房空间布局及内部物品特征,借助计算流体动力学技术研究了不同泄爆面开启压力和不同大尺度障碍物体积阻塞率条件下天然气内爆炸火焰速度、爆炸超压的分布规律。研究结果表明:大尺度障碍物与泄爆面对室内天然气爆炸过程具有显著的协同作用,共同促进火焰速度与爆炸超压的显著增长,并缩短峰值超压到达时间;大尺度障碍物的存在虽然显著降低了室内天然气的体积,但从增加房间内湍流源和相对长径比的角度进一步促进了泄爆效应;大尺度障碍物与泄爆面协同作用下,室内火焰速度呈现明显的阶段性特征,并在泄爆面附近发生波动。研究结论可为民用建筑物内气体爆炸事故调查分析和灾害评估提供科学依据。     

A study on the obstacle-induced variation of the gas explosion characteristics

A study on the variation of the gas explosion characteristics caused by the built-in obstacles was conducted in enclosed/vented gas explosion vessels. It has been well known that the obstacles in pipes and long ducts would accelerate the flame propagation, and cause the transition from deflagration to detonation. In this study, the explosion characteristics and the flame behavior of vented explosions and constant-volume explosions were investigated. Experiments were carried out in a 270-liter and 36-liter hexahedron vessels filled with LPG–air mixture. The explosion characteristics of the gas mixture were determined by using a strain-responding pressure transducer. The flame behavior was recorded by using a high-speed video camera. The shape and the size of the obstacle, and the gas concentration, were adjusted in the experiments.

It can be seen from the experimental results that, instead of being accelerated, the flame propagation inside the explosion vessel is decelerated by the plate obstacles fixed at the bottom of the vessel. Also, the characteristics of the enclosed explosion are not so affected by the built-in obstacles as those of the vented explosion are. It is believed that the eddy-induced turbulence behind the obstacle decelerates the flame propagation.     

Flame acceleration in tube explosions with up to three flat-bar obstacles with variable obstacle separation distance

The effect of obstacle separation distance on the severity of gas explosions has received little methodical study. It was the aim of this work to investigate the influence of obstacle spacing of up to three flat-bar obstacles. The tests were performed using methane-air (10% by vol.), in an elongated vented cylindrical vessel 162 mm internal diameter with an overall length-to-diameter, L/D, of 27.7. The obstacles had either 2 or 4 flat-bars and presenting 20% blockage ratio to the flow path. The different number of flat-bars for the same blockage achieved a change of the obstacle scale which was also part of this investigation. The first two obstacles were kept at the established optimum spacing and only the spacing between the second and third obstacles was varied. The profiles of maximum flame speed and overpressure with separation distance were shown to agree with the cold flow turbulence profile determined in cold flows by other researchers. However, the present results showed that the maximum effect in explosions is experienced at 80 to 100 obstacle scales about 4 times further downstream than the position of maximum turbulence determined in the cold flow studies. Similar trends were observed for the flames speeds. In both cases the optimum spacing between the second and third obstacles corresponded to the same optimum spacing found for the first two obstacles demonstrating that the optimum separation distance does not change with number of obstacles. In planning the layout of new installations, the worst case separation distance needs to be avoided but incorporated when assessing the risk to existing set-ups. The results clearly demonstrate that high congestion in a given layout does not necessarily imply higher explosion severity as traditionally assumed. Less congested but optimally separated obstructions can lead to higher overpressures.     

球形障碍物对瓦斯爆燃火焰影响试验研究

为进一步开发煤矿井下瓦斯爆炸事故的隔抑爆技术装备,利用截面为0.2 m×0.2 m的方形管道、纹影仪和高速摄像机,开展无障碍物时和球形障碍物存在情况下的瓦斯爆燃传播试验.研究发现,无障碍物时,密闭管道内爆燃火焰的结构和传播速度受反射压力波的影响很大,湍流火焰、化学反应作用能力与反射压力波的相互作用是造成火焰传播速度变化...     

对称障碍物条件下瓦斯爆炸火焰与压力波耦合作用研究

为了研究对称障碍物条件下瓦斯爆炸压力波与火焰传播的耦合作用,在150 mm×150 mm×1 700 mm的有机玻璃瓦斯爆炸管道中,距离点火端不同距离安装0.5阻塞率的对称障碍物,进行8.5%甲烷体积分数的爆炸试验,采集瓦斯爆炸的超压信号并同步拍摄火焰传播图像。结果表明:火焰穿越板式对称障碍物的过程经历了火焰加速、火焰降速到火焰再加速的过程,火焰降速的时间仅为5 ms。距离点火焰源不同长度的对称障碍物在火焰加速过程中的作用存在明显差异,近点火源的障碍物作用主要为诱导湍流,远离点火源的障碍物作用主要为湍流增强。     

Effects of multiple annular obstacles on flame propagation of local corn starch dust in a vertical pipe

With high-speed camera technology, the propagation behavior of explosion flame for the local dust cloud of corn starch in a semi-open vertical pipe under the action of the annular obstacle was studied experimentally, and the blockage rate and the annular obstacle numbers as well as impact of dust cloud concentration on the flame propagation were investigated. The researches showed that both the blockage rate and the annular obstacle numbers have significant effects on the flame speed and propagation process for the dust cloud explosion of corn starch. The increase of the blockage rate of such annular obstacles will cause that the combustion of dust cloud with high concentration is mainly concentrated in the lower part of the pipe. The increase of the annular obstacle numbers will lead to the acceleration of combustion of the dust cloud. With the increase of the blockage rate and the annular obstacle numbers, the maximum flame speed shows a trend of the first increasing and then decreasing, and the phenomenon of accelerated propagation of the flame becomes more and more obvious, however, the distance of continuous acceleration for the flame is gradually decreased and the maximum flame speed is farther from the outlet of the pipe. Under the action of such annular obstacles, the concentration of dust cloud has a significant effect on the flame speed and shape of the dust cloud of the corn starch. The increase of the concentration of the dust cloud will decrease the acceleration effect of such annular obstacles to result in maximum flame speed showing a trend of the first increasing and then decreasing. However, the acceleration distance of the flame is longer, and the maximum flame speed is closer to the outlet of the pipe. The increasing concentration will make the flame speed develop more slowly, the flame color will be darker, and the flame segmentation phenomenon will be more obvious.     

Effects of cross-wise obstacle position on methane–air deflagration characteristics

A vented chamber, with internal dimensions of 150 mm × 150 mm × 500 mm, is constructed in which the premixed methane–air deflagration flame, propagating away from the ignition source, interacts with obstacles along its path. Three obstacle configurations with different cross-wise positions are investigated. The cross-wise obstacle positions are found to have significant effects on deflagration characteristics, such as flame structure, flame front location, flame speed, and overpressure transients. The rate of flame acceleration, as the flame passes over the last obstacle, is the highest at the configuration with three centrally located obstacles, whereas the lowest is observed at the configuration with three obstacles mounted on one side of the chamber. Compared with the side configuration, the magnitude of overpressure generated increases by approximately 80% and 165% for the central and staggered configurations, respectively. Furthermore, flame propagation speeds and generated overpressures for both the central and staggered configurations are greater, which should to be avoided to reduce the risk associated with turbulent premixed deflagrations in practical processes.     

Study on acceleration and suppression properties of coal gangue with different void fractions on gas explosion propagation

Gas explosion is one of the main disasters in coal mining. Plenty of coal gangue are generally distributed in the disaster areas in gob. Experiments were carried out to explore the propagation law of the gas explosion distributed by coal gangue. The variation characteristics of the overpressure, pressure rise rate, and flame shape with void fractions were analyzed. The results showed that the effect of the coal gangue on the explosion intensity changed from suppression to acceleration with the increase of void fraction, the flame front upstream blockage area changed from laminar state to turbulent divergent state, and a reverse flame was formed. When the void fraction of the coal gangue was 0.50–0.65, the maximum overpressure downstream of the blocked area were positively correlated with the void fraction and the critical suppression range was between 0.50 and 0.55. When the void fraction was lower than 0.50, the flame was quenched in the coal gangue, neither the flame nor the pressure could pass through the blocked area. It is helpful to guide the improvement of coal recovery process to avoid the expansion of the explosion impact in coalmine gob.     

障碍物排列方式对海洋平台蒸气云爆炸的影响

为了了解障碍物排列方式对海洋平台蒸气云爆炸的影响,基于CFD方法建立蒸气云爆炸计算模型,选用国外MERGE项目的系列爆炸实验进行模型验证,提出用于衡量障碍物排列不均匀度的量化参数,针对海洋平台典型结构形式,分析障碍物排列方式对爆炸强度的影响。研究结果表明:蒸气云爆炸后果对于结构排列方式比较敏感,结构障碍物间隔均匀排列的形式造成的爆炸冲击作用最大;在爆炸发展初期阶段,障碍物阻塞程度对超压产生和发展影响更加显著。最后,基于研究结果,给出在海洋平台油气泄漏危险区将管线沿甲板非均匀排列布置等防控建议,为海洋平台蒸气云爆炸安全防控提供理论指导。     

空腔及其耦合水袋抑制瓦斯爆炸实验研究

为探索一种新型瓦斯抑爆技术,设计宽径比分别为1.5,2.5,4的矩形空腔体,并基于自行搭建的长36 m,管径为200 mm的大型瓦斯爆炸实验系统,通过在管网中铺设不同宽径比空腔体结构开展抑爆实验。此外依托支护简单的宽径比为2.5的空腔体,在腔体内填充不同质量水袋开展实验,以期进一步提高空腔体抑爆性能。结果表明:对于长径比为2.5、高径比为1的空腔体在实验宽径比范围内均能在一定程度上抑制瓦斯爆炸强度;随着腔体宽径比的增加,截面面积变化率增大,火焰及冲击波超压峰值衰减幅度越大,抑爆效果越佳;空腔耦合抑爆剂水能提高腔体的抑爆效果,在实验范围内较纯空腔可使火焰抑制率最大提高70%,超压峰值抑制率最大提高263%。     

5种结构障碍物对火焰传播影响的试验研究

为了研究障碍物结构对预混甲烷管道内火焰传播速度和峰值超压的影响,自行设计一套火焰加速系统。在火焰加速管道上安装光电传感器和压力传感器分别测定火焰传播速度和超压,试验中选取5种结构障碍物,即平板、长方体、三棱柱、四棱柱和圆柱,其阻塞比分别为20%,40%和60%3种。研究结果表明:初始阶段障碍物阻碍火焰传播,当火焰越过障碍物后,障碍物能显著加速火焰传播。随着阻塞比增加,相同结构障碍物的火焰传播速度总体上不断增加,而峰值超压先变大后减小。相同阻塞比下,平板、三棱柱对火焰传播速度和超压影响相对较大;长方体居中;圆柱、四棱柱对增加火焰传播速度和超压作用相对较小。较小阻塞比障碍物管道内超压与无障碍物管道中的超压相比显著增加,但此后,管道中超压随阻塞比变化不明显。     

障碍物布置对气体爆炸压力场的影响效果研究

为研究可燃气体爆炸压力场受障碍物布置的影响情况,运用流体动力学软件AutoReaGas建立不同阻塞程度和不同结构（平面、立体）的障碍物爆炸模型,模拟分析不同布置情况对气体爆炸压力场的影响程度和规律。研究表明:改变障碍物的阻塞程度和结构（平面、立体）都会影响可燃气体的爆炸超压峰值。同种障碍物结构下,随着阻塞率的增加,气体爆炸压力的增加程度在一定范围内呈现出先增大后减小的变化情况;相同阻塞率下,立体障碍物对爆炸压力场产生的影响明显大于平面障碍物。研究立体障碍物与平面障碍物对加速燃烧的影响情况旨在为工业生产过程中的实际应用提供理论依据和基础,为防控气体爆炸灾害提供一定参考借鉴作用。     

Explosions of gasoline–air mixture in the tunnels containing branch configuration

In order to investigate the effects of branch tunnels on explosion propagation, experiments were performed in five different configuration tunnels (straight configuration and configurations with 1 branch, 2 branches, 3 branches and 4 branches). Pressure and flame transducers were used to record the history of the pressure development and track the velocity of the flame front. It was shown that the branch tunnels had ability to enhance the maximum overpressure, rate of overpressure rise, and deflagration index (K_G) of the gasoline–air mixture explosion due to the turbulence induced by the branch tunnels. The overpressure rise rate and K_G of the explosion increased as a function of the number of branch tunnels. Experiments also showed that the maximum flame speed increased as the branch number increasing from 0 to 3 due to the enlargement of turbulence induced by the branch tunnels. However, an increase of branch number did not always lead to an enhancement of flame speed because the heat loss was intensified resulting from the increase of flame surface caused by the branch tunnels. When the number of branch tunnels exceeded 3, the maximum flame speed dropped.     

A method for simulation of vapour cloud explosions based on computational fluid dynamics (CFD)

The effectiveness of the application of CFD to vapour cloud explosion (VCE) modelling depends on the accuracy with which geometrical details of the obstacles likely to be encountered by the vapour cloud are represented and the correctness with which turbulence is predicted. This is because the severity of a VCE strongly depends on the types of obstacles encountered by the cloud undergoing combustion; the turbulence generated by the obstacles influences flame speed and feeds the process of explosion through enhanced mixing of fuel and oxidant. In this paper a CFD-based method is proposed on the basis of the author’s finding that among the various models available for assessing turbulence, the realizable k-? model yields results closer to experimental findings than the other, more frequently used, turbulence models if used in conjunction with the eddy-dissipation model. The applicability of the method has been demonstrated in simulating the dispersion and ignition of a typical vapour cloud formed as a result of a spill from a liquid petroleum gas (LPG) tank situated in a refinery. The simulation made it possible to assess the overpressures resulting from the combustion of the flammable vapour cloud. The phenomenon of flame acceleration, which is a characteristic of combustion enhanced in the presence of obstacles, was clearly observed. Comparison of the results with an oft-used commercial software reveals that the present CFD-based method achieves a more realistic simulation of the VCE phenomena.