Solid phase extraction of methomyl and thiodicarb from environmental water with an activated carbon cartridge and their determination by HPLC

ＩｎｔｒｏｄｕｃｔｉｏｎＢｏｔｈｍｅｔｈｏｍｙｌａｎｄｔｈｉｏｄｉｃａｒｂａｒｅＮｍｅｔｈｙｌｃａｒｂｍａｔｅｐｅｓｔｉｃｉｄｅｓ.Ｍｅｔｈｏｍｙｌｉｓｅｆｆｅｃｔｉｖｅｏｎａｗｉｄｅｒａｎｇｅｏｆｉｎｓｅｃｔｓａｓａｎｏｖｉｃｉｄｅ,ｌａｒｖｉｃｉｄ...     

Adsorptive removal of As(Ⅲ) ions from water using spent grain modified by polyacrylamide

In order to enhance the removal efficiency of As(III), a pre-oxidation process is generally applied first to convert As(III) to As(V), which may cause unwanted new contaminants. To overcome this problem, efforts were made to develop an effective way to remove As(III)directly without an oxidation step. The effect of polyacrylamide polymers(PAMs) such as anionic PAM, cationic PAM and nonionic PAM, on As(III) ion adsorption by spent grain(SG)was investigated. The physico-chemical properties of the three PAM-polymerized SGs(APSG(anionic PAM-polymerized modified spent grain), CPSG(cationic PAM-polymerized spent grain) and NPSG(nonionic PAM-polymerized spent grain)) were analyzed using Fourier transform infrared(FT-IR), scanning electron microscope(SEM) and zeta potential.Batch experimental data showed that the sequence of preferential adsorption for As(III) was APSG CPSG NPSG. Active functional groups such as amino group(NH2), carbonyl group(C_O), C–N bond of the amide group(CONH2), and hydroxyl group(O–H) were responsible for As(III) adsorption. Many tubular structures occurring on the surface of APSG possibly increase the specific surface areas and favor the adsorption of As(III) ions. A fixed-bed study was carried out by using APSG as an adsorbent for As(III) from water. Three factors such as bed height, initial concentration and flow rate were studied, and breakthrough curves of As(III) were obtained. The Adams–Bohart model was used to analyze the experimental data and the model parameters were evaluated.     

Removal of 2-ClBP from soil–water system using activated carbon supported nanoscale zerovalent iron

We explored the feasibility and removal mechanism of removing 2-chlorobiphenyl(2-Cl BP)from soil–water system using granular activated carbon(GAC) impregnated with nanoscale zerovalent iron(reactive activated carbon or RAC).The RAC samples were successfully synthesized by the liquid precipitation method.The mesoporous GAC based RAC with low iron content(1.32%) exhibited higher 2-Cl BP removal efficiency(54.6%) in the water phase.The result of Langmuir–Hinshelwood kinetic model implied that the different molecular structures between 2-Cl BP and trichloroethylene(TCE) resulted in more difference in dechlorination reaction rates on RAC than adsorption capacities.Compared to removing2-Cl BP in the water phase,RAC removed the 2-Cl BP more slowly in the soil phase due to the significant external mass transfer resistance.However,in the soil phase,a better removal capacity of RAC was observed than its base GAC because the chemical dechlorination played a more important role in total removal process for 2-Cl BP.This important result verified the effectiveness of RAC for removing 2-Cl BP in the soil phase.Although reducing the total RAC removal rate of 2-Cl BP,soil organic matter(SOM),especially the soft carbon,also served as an electron transfer medium to promote the dechlorination of 2-Cl BP in the long term.     

Activated carbon enhanced ozonation of oxalate attributed to HO. oxidation in bulk solution and surface oxidation： Effect of activated carbon dosage and pH

Ozonation of oxalate in aqueous phase was performed with a commercial activated carbon（AC）in this work. The effect of AC dosage and solution pH on the contribution of hydroxyl radicals（HOU） in bulk solution and oxidation on the AC surface to the removal of oxalate was studied. We found that the removal of oxalate was reduced by tert-butyl alcohol（tBA） with low dosages of AC,while it was hardly affected by tBA when the AC dosage was greater than 0.3 g/L. tBA also inhibited ozone decomposition when the AC dosage was no more than 0.05 g/L, but it did not work when the AC dosage was no less than 0.1 g/L. These observations indicate that HOUin bulk solution and oxidation on the AC surface both contribute to the removal of oxalate. HOU oxidation in bulk solution is significant when the dosage of AC is low, whereas surface oxidation is dominant when the dosage of AC is high. The oxalate removal decreased with increasing pH of the solution with an AC dosage of 0.5 g/L. The degradation of oxalate occurs mainly through surface oxidation in acid and neutral solution, but through HOUoxidation in basic bulk solution. A mechanism involving both HOUoxidation in bulk solution and surface oxidation was proposed for AC enhanced ozonation of oxalate.     

Fast and efficient aqueous arsenic removal by functionalized MIL-100(Fe)/rGO/δ-MnO2 ternary composites: Adsorption performance and mechanism

Because of its significant toxicological effects on the environment and human health,arsenic(As) is a major global issue.In this study,an Fe-based metal-organic framework(MOF)(Materials of Institut Lavoisier:MIL-100(Fe)) which was impregnated with reduced graphene oxide(rGO) by using a simple hydrothermal method and coated with birnessitetype manganese oxide(δ-MnO_2) using the one-pot reaction process(MIL-100(Fe)/rGO/δ-MnO_2 nanocomposites) was synthesized and applied successfully in As removal.The removal efficiency was rapid,the equilibrium was achieved in 40 min and 120 min for As(Ⅲ) and As(Ⅴ),respectively,at a level of 5 mg/L.The maximum adsorption capacities of As(Ⅲ) and As(Ⅴ) at pH 2 were 192.67 mg/g and 162.07 mg/g,respectively.The adsorbent revealed high stability in pH range 2-9 and saturated adsorbent can be fully regenerated at least five runs.The adsorption process can be described by the pseudo-second-order kinetic model and Langmuir monolayer adsorption.The adsorption mechanisms consisted of electrostatic interaction,oxidation and inner sphere surface complexation.     

Modified activated carbon with interconnected fibrils of iron-oxyhydroxides using Mn2 + as morphology regulator, for a superior arsenic removal from water

The arsenic removal efficiency of iron-modified activated carbons depends greatly on the number of available iron oxide surface sites, which are given by the surface area of the anchored particles. In this sense, aiming the generation of an adsorbent with superior arsenic adsorption capacity, we developed a protocol to anchor interconnected fibrils of iron oxyhydroxides, using Mn^2 + as a morphology regulator. The protocol was based on a microwave-assisted hydrothermal method, using bituminous based activated carbon and both Fe^2 + and Mn^2 + ions in the hydrolysis solution. The elemental analysis of modified carbons revealed that Mn does not anchor to the carbon. However, when Mn is included in the hydrolysis solution, the iron content in the activated carbon increased up to 3.5?wt%, without considerable decreasing the adsorbent surface area. Under specific hydrothermal conditions, the Mn^2 + promoted the formation of iron oxide nanoparticles shaped as interconnected fibrils. This material showed a superior arsenic adsorption capacity in comparison to similar iron modified activated carbons (5?mg As/g carbon, at 2?mg As/L), attributed to the increase in quantity and availability of active sites located on the novel interconnected fibrils of iron oxyhydroxides nanostructures.     

Removal of trace arsenic（V） and phosphate from water by a highly selective ligand exchange adsorbent

The ligand exchange adsorbent could be used to remove the toxic arsenic(V) and phosphate efficiently from water even in the presence of foreign anions and possible to apply in chemical industry.     

Preparation and evaluation of Zr-β-FeOOH for efficient arsenic removal

A Zr-β-FeOOH adsorbent for both As(V) and As(III) removal was prepared by a chemical co-precipitation method.Compared with β-FeOOH,the addition of Zr enhanced the adsorption capacities for As(V) and As(III),especially As(III).The maximum adsorption capacities for As(III) and As(V) were 120 and 60mg/g respectively at pH 7.0,much higher than for many reported adsorbents.The adsorption data accorded with Freundlich isotherms.At neutral pH,for As(V),adsorption equilibrium was approached after 3 hr,while for As(III),adsorption equilibrium was approached after 5 hr.Kinetic data fitted well to the pseudo second-order reaction model.As(V) elimination was favored at acidic pH,whereas the adsorption of As(III) by Zr-β-FeOOH was found to be effective over a wide pH range of 4-10.Competitive anions hindered the adsorption according to the sequence:phosphate > silicate > bicarbonate > sulfate > nitrate,while Ca2+ and Mg2+ increased the removal of As(III) and As(V) slightly.The high adsorption capability and good performance in other aspects make Zr-β-FeOOH a potentially attractive adsorbent for the removal of both As(III) and As(V) from water.     

Impact of environmental factors on the sampling rate of β-blockers and sulfonamides from water by a carbon nanotube-passive sampler

Passive techniques are a constantly evolving approach to the long-term monitoring of micropollutants, including pharmaceuticals, in the aquatic environment. This paper presents, for the first time, the calibration results of a new CNTs-PSDs (carbon nanotubes used as a sorbent in passive sampling devices) with an examination of the effect of donor phase salinity, water pH and the concentration of dissolved humic acids (DHAs), using both ultrapure and environmental waters. Sampling rates (R_s) were determined for the developed kinetic samplers. It has been observed that the impact of the examined environmental factors on the R_s values strictly depends on the type of the analytes. In the case of β-blockers, the only environmental parameter affecting their uptake rate was the salinity of water. A certain relationship was noted, namely the higher the salt concentration in water, the lower the R_s values of β-blockers. In the case of sulfonamides, water salinity, water pH 7–9 and DHAs concentration decreased the uptake rate of these compounds by CNTs-PSDs. The determined R_s values differed in particular when the values obtained from the experiments carried out using ultrapure water and environmental waters were compared. The general conclusion is that the calibration of novel CNTs-PSDs should be carried out under physicochemical conditions of the aquatic phase that are similar to the environmental matrix.     

Effects of solution chemistry on arsenic(Ⅴ) removal by low-cost adsorbents

Natural and anthropogenic arsenic （As） contamination of water sources pose serious health concerns, especially for small communities in rural areas. This study assessed the applicability of three industrial byproducts （coal fly ash, lignite, and green waste compost） as the low-cost adsorbents for As（V） removal under various field-relevant conditions （dissolved oxygen, As（V）/Fe ratio, solution pH, and presence of competing species）. The physico-chemical properties of the adsorbents were characterized by XRD, XRF, FT-IR, and NMR analysis. Batch experiments demonstrated that coal fly ash could provide effective As（V） removal （82.1%-95%） because it contained high content of amorphous iron/aluminium hydroxides for As（V） adsorption and dissolvable calcium minerals for calcium arsenate precipitation. However, the addition of lignite and green waste compost was found unfavourable since they hindered the As（V） removal by 10%-42% possibly due to dissolution of organic matter and ternary arsenate-iron-organic matter complexes. On the other hand, higher concentrations of dissolved iron （comparing As（V）/Fe ratios of 1：1 and 1：10） and dissolved oxygen （comparing 0.2 and 6 mg/L） only marginally enhanced the As（V） removal at pH 6 and 8. Thus, addition of dissolved iron, water aeration, or pH adjustment became unnecessary because coal fly ash was able to provide effective As（V） removal under the natural range of geochemical conditions. Moreover, the presence of low levels of background competing （0.8 or 8 mg/L of humic acid, phosphate, and silicate） imposed little influence on As（V） removal, possibly because the high adsorption capacity of coal fly ash was far from exhaustion. These results suggested that coal fly ash was a potentially promising adsorbent that warranted further investigation.     

Organic pollutants removal from 2,4,6-trinitrotoluene （TNT） red water using low cost activated coke

2,4,6-trinitrotoluene (TNT) red water from Chinese explosive industry was adsorbed by activated coke (AC) from lignite. Since the composition of TNT red water was very complicated, chemical oxygen demand (COD) was used as the index for evaluating the treatment efficiency. This study focused on the sorption kinetics and equilibrium sorption isotherms of AC for the removal of chemical oxygen demand (COD) from TNT red water, and the changes of water quality before and after adsorption were evaluated by using high performance liquid chromatograph (HPLC), UV-vis spectra and Gas Chromatography/Mass Spectroscopy (GC/MS). The results showed that the sorption kinetics of adsorbing COD from TNT red water onto AC was fitted well with the pseudo-second order model. The adsorption process was an exothermic and physical process. The sorption isotherm was in good agreement with Redlich–Peterson isotherm. At the conditions of initial pH, 20℃ and 3 hr of agitation, when the AC dosage was 160 g L-1, 64.8% of COD could be removed. The removal efficiencies of 2,4-dinitrotoluene-3-sulfonate (2,4-DNT-3-SO3-) and 2,4-dinitrotoluene-5-sulfonate (2,4-DNT-5-SO3-) were 80.5% and 84.3%, respectively. After adsorption, the acute toxicity of TNT red water reduced 81.8%, compared with that of unprocessed TNT red water.     

Experimental and theoretical studies on NO selective catalytic oxidation over α-MnO2

Based on the experimental and theoretical methods, the NO selective catalytic oxidation process was proposed. The experimental results indicated that lattice oxygen was the active site for NO oxide over the $\mathrm{\alpha }$-MnO₂(110) surface. In the theoretical study, DFT (density functional theory) and periodic slab modeling were performed on an $\mathrm{\alpha }$-MnO₂(110) surface, and two possible NO oxidation mechanisms over the surface were proposed. The non-defect $\mathrm{\alpha }$-MnO₂(110) surface showed the highest stability, and the surface O_s (the second layer oxygen atoms) position was the most active and stable site. O₂ molecule enhanced the joint adsorption process of two NO molecules. The reaction process, including O₂ dissociation and O=N-O-O-N=O formation, was calculated to carry out the NO catalytic oxidation mechanism over $\mathrm{\alpha }$-MnO₂(110). The results showed that NO oxidation over the $\mathrm{\alpha }$-MnO₂(110) surface exhibited the greatest possibility following the route of O=N-O-O-N=O formation. Meanwhile, the formation of O=N-O-O-N=O was the rate-determining step.     

Kinetic adsorption of application of carbon nanotubes for Pb（II） removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(II) was reach to maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coefficients from Langmuir isotherm model indicates the strong adsorptions of Pb(II) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). From this study, the results indicates that the highest percentage removal of Pb (96.03%) can be achieved at pH 5, 40 mg/L of CNTs, contact time 80 min, and agitation speed 50 r/min.     

Kinetic adsorption of application of carbon nanotubes for Pb(Ⅱ) removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(Ⅱ) reached maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coeffcients from Langmuir isotherm model indicates the strong adsorptions of Pb(Ⅱ) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). The results indicates tha...     

Analysis of α, β, γ-hexachlorocyclohexanes in water by novel activated carbon fiber-solid phase microextraction coupled with gas chromatography--mass spectrometry

A fast and simple method for determination of α, β,γ-hexachlorocyclohexanes (HCHs) in water using activated carbon fibersolid phase microextraction(ACF-SPME) were studied. Results showed the performance of adsorption and desorption of three HCHs on ACF were excellent. A wide linear range from 10 to 100 μg/L and detection limits of the ng/L level were obtained using ACF-SPME with GC-MS in selected ion monitoring(SIM) acquisition mode. The proposed method was also successfully applied for determination of three HCHs in tap water. Compared to commercial fibers, ACF showed some advantages such as better resistance to solvents, higher thermal stability, longer lifetime and lower cost. The data demonstrated that GC-MS with ACF-SPME is well suitable for the analysis of HCHs in water.     

Treatability studies of naphthalene in soil,water and air with persulfate activated by iron(Ⅱ)

Chemical oxidation was applied to an artificially contaminated soil with naphthalene (NAP). Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. The importance of the air phase analysis was emphasized by demonstrating how NAP behaves in a sealed system over a 4 hr reaction period. Design of Experiments method was applied to the following variables: sodium persulfate concentration [SP], ferrous sulfate concentration [FeSO₄], and pH. The system operated with a prefixed solid to liquid ratio of 1:2. The following conditions resulted in optimum NAP removal [SP] = 18.37 g/L, [FeSO₄] = 4.25 g/L and pH = 3.00. At the end of the 4 hr reaction, 62% of NAP was degraded. In the soil phase, the chemical oxidation reduced the NAP concentration thus achieving levels which comply with Brazilian and USA environmental legislations. Besides the NAP partitioning view, the monitoring of each phase allowed the variabilities assessment over the process, refining the knowledge of mass reduction. Based on NAP distribution in the system, this study demonstrates the importance of evaluating the presence of semi-volatile and volatile organic compounds in the air phase during remediation, so that there is greater control of the system as to the distribution and presence of the contaminant in the environment. The results highlight the importance of treating the contaminant in all its phases at the contaminated site.     

Groundwater arsenic removal by coagulation using ferric(Ⅲ)sulfate and polyferric sulfate: A comparative and mechanistic study

Elevated arsenic(As) in groundwater poses a great threat to human health. Coagulation using mono- and poly-Fe salts is becoming one of the most cost-effective processes for groundwater As removal. However, a limitation comes from insufficient understanding of the As removal mechanism from groundwater matrices in the coagulation process, which is critical for groundwater treatment and residual solid disposal. Here, we overcame this hurdle by utilizing microscopic techniques to explore molecular As surface complexes on the freshly formed Fe flocs and compared ferric(III) sulfate(FS) and polyferric sulfate(PFS)performance, and finally provided a practical solution in As-geogenic areas. FS and PFS exhibited a similar As removal efficiency in coagulation and coagulation/filtration in a two-bucket system using 5 mg/L Ca(ClO)_2. By using the two-bucket system combining coagulation and sand filtration, 500 L of As-safe water( 10 μg/L) was achieved during five treatment cycles by washing the sand layer after each cycle. Fe k-edge X-ray absorption near-edge structure(XANES) and As k-edge extended X-ray absorption fine structure(EXAFS) analysis of the solid residue indicated that As formed a bidentate binuclear complex on ferrihydrite, with no observation of scorodite or poorly-crystalline ferric arsenate. Such a stable surface complex is beneficial for As immobilization in the solid residue, as confirmed by the achievement of much lower leachate As(0.9 μg/L–0.487 mg/L)than the US EPA regulatory limit(5 mg/L). Finally, PFS is superior to FS because of its lower dose, much lower solid residue, and lower cost for As-safe drinking water.     

Simultaneous elution of polycyclic aromatic hydrocarbons and heavy metals from contaminated soil by two amino acids derived from β-cyclodextrins

Two highly water-soluble amino acids, which derived from -CDs, i.e., glutamic acid- -cyclodextrin (GluCD) and ethylene-diamine- -cyclodextrin (EDCD), were synthesized and were examined for their e ect on solubilization of anthracene (ANT), complexation of cadmium (Cd2+), and elution removal of ANT and Cd2+ in soil. The results showed that GluCD and EDCD were powerful complexant for ANT and Cd2+. In the presence of 10 g/L GluCD and EDCD, the solubilization of ANT increased by 47.04 and 23.85 times compared to the control, respectively. GluCD resulted in approximately 90% complexation of Cd2+ while 70% complexation was observed for EDCD. Simultaneously, GluCD and EDCD could greatly enhance the elution removal of ANT and Cd2+ from soil. GluCD resulted in the highest elution e ciency of ANT and Cd2+.With the addition of 10 g/L GluCD, 53.5% of ANT and 85.6% of Cd2+ were eluted, respectively. The ANT had a negligible e ect on the Cd2+ removal due to di erent complexing sites of ANT and Cd2+, while Cd2+ enhanced the ANT removal under the addition of GluCD because Cd2+ neutralized the –COOH group of GluCD. Adversely, the removal of ANT was decreased with Cd2+ under the addition of EDCD, this was due to the fact that Cd2+ enhanced the polarity of EDCD molecule and inhibited the complexation between ANT and EDCD. The study suggested that GluCD could be preferred and be successfully applied to remediation of heavy metals or organic compounds in contaminated soil.     

Treatment of desizing wastewater from the textile industry by wet air oxidation

This paper describes the application of wet air oxidation to the treatment of desizing wastewater from two textile companies. A two-liter high temperature, high pressure autoclave reactor was used in the study. The range of operating temperatures examined was between 150 and 290℃, and the partial pressure of oxygen ranged from 0. 375 to 2.25 MPa. Variations in pH,CODCr and TOD content were monitored during each experiment and used to assess the extent of conversion of the process. The effects of temperature, pressure and reaction time were explored extensively. More than 90 ％ CODCr reduction and 80 ％ TOC removal have been obtained. The results have also been demonstrated that WAO is a suitable pre-treatment methods due to improvement of the BOD5/CODCr ratio of desizing wastewater. The reaction kinetics of wet air oxidation of desizing wastewater has been proved to be two steps, a fast reaction followed by a slow reaction stage.