Highly efficient and selective removal of low-concentration antibiotics from aqueous solution by regenerable Mg(OH)2

The prevalent presence of fluoroquinolone antibiotics in aquatic environments has attracted considerable attention because of their harmful effects on humans and the ecological environment.Magnesium hydroxide nanocrystals were found to act as a simple and effective adsorbent to remove low-concentration ciprofloxacin(CIP) in aqueous solution.The as-prepared Mg(OH)₂ nanocrystals exhibited excellent CIP adsorption performance and high selectivity toward CIP molecules compared with other ...     

Enhanced activation of peroxydisulfate by strontium modified BiFeO3perovskite for ciprofloxacin degradation

A series of Sr-doped BiFeO₃ perovskites (Bi_1-xSr_xFeO₃, BSFO) fabricated via sol-gel method was applied as peroxydisulfate (PDS) activator for ciprofloxacin (CIP) degradation. Various technologies were used to characterize the morphology and physicochemical features of prepared BSFO samples and the results indicated that Sr was successfully inserted into the perovskites lattice. The catalytic performance of BiFeO₃ was significantly boosted by strontium doping. Specifically, Bi_0.9Sr_0.1FeO₃ (0.1BSFO) exhibited the highest catalytic performance for PDS activation to remove CIP, where 95% of CIP (10 mg/L) could be degraded with the addition of 1 g/L 0.1BSFO and 1 mmol/L PDS within 60 min. Moreover, 0.1BSFO displayed high reusability and stability with lower metal leaching. Weak acidic condition was preferred to neutral and alkaline conditions in 0.1BSFO/PDS system. The boosted catalytic performance can be interpreted as the lower oxidation state of Fe and the existence of affluent oxygen vacancies generated by Sr doping, that induced the formation of singlet oxygen (¹O₂) which was confirmed as the dominant reactive species by radical scavenging studies and electron spin resonance (ESR) tests. The catalytic oxidation mechanism related to major ¹O₂ and minor free radicals was proposed. Current study opens a new avenue to develop effective A-site modified perovskite and expands their application for PDS activation in wastewater remediation.     

Potential applications of porous organic polymers as adsorbent for the adsorption of volatile organic compounds

Volatile organic compounds (VOCs) with high toxicity and carcinogenicity are emitted from kinds of industries, which endanger human health and the environment. Adsorption is a promising method for the treatment of VOCs due to its low cost and high efficiency. In recent years, activated carbons, zeolites, and mesoporous materials are widely used to remove VOCs because of their high specific surface area and abundant porosity. However, the hydrophilic nature and low desorption rate of those materials limit their commercial application. Furthermore, the adsorption capacities of VOCs still need to be improved. Porous organic polymers (POPs) with extremely high porosity, structural diversity, and hydrophobic have been considered as one of the most promising candidates for VOCs adsorption. This review generalized the superiority of POPs for VOCs adsorption compared to other porous materials and summarized the studies of VOCs adsorption on different types of POPs. Moreover, the mechanism of competitive adsorption between water and VOCs on the POPs was discussed. Finally, a concise outlook for utilizing POPs for VOCs adsorption was discussed, noting areas in which further work is needed to develop the next-generation POPs for practical applications.     

One-step preparation of MoOx/ZnS/ZnO composite and its excellent performance in piezocatalytic degradation of Rhodamine B under ultrasonic vibration

This paper synthesized a new type of ternary piezoelectric catalyst MoO_x/ZnS/ZnO (MZZ)by a one-step method.The catalytic degradation of Rhodamine B (RhB) solution (10μg/g,pH=7.0) shows that the composite catalyst has excellent piezoelectric catalytic activity under ultrasonic vibration (40 k Hz).The piezoelectric degradation rate of the optimal sample reached 0.054 min^-1,which was about 2.5 times that of pure ZnO.X-ray diffraction(XRD),X-ray photoelectron spectroscopy (XPS)...     

Bi/BiVO4/NiFe-LDH heterostructures with enhanced photoelectrochemical performance for streptomycin detection

Streptomycin (STR) plays an essential role in bacterial infection treatments. Selectivity and sensitivity of photoelectrochemical (PEC) sensors are the two most important parameters, which can be measured using the photosensitivity of its active material. We prepared a novel PEC sensor to detect STR using Bi/BiVO₄/LDH (layered double hydroxides) heterostructures as an active material, which is photoactive in the visible light wavelength range. The simultaneous presence of LDH and Bi/BiVO₄ enhanced the material photocurrent response, which was linear to the STR concentrations in the 0.01–500 nmol/L range. The STR detection limit by this sensor was 0.0042 nmol/L. Our novel PEC-based sensing strategy includes using an ultra-sensitive and highly selective sensor for STR detection. Additionally, the two-pot synthesis of Bi/BiVO₄/LDH developed in this work is environmentally friendly.     

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporationinduced self-assembly(EISA) methods,respectively.The pore structures of CMK-3 and CFDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction,field emission scanning electron microscopy,transmission electron microscopy,and N₂ adsorption–desorption.Adsorption of NO was investigated by means of thermogravimetric analysis,temperature-programmed desorption of NO + O₂     

Enzymatic preparation of hydrophobic biomass with one-pot synthesis and the oil removal performance

Oil pollution is causing deleterious damage to aquatic ecosystems and human health. The utilization of agricultural waste such as corn stalk (CS) to produce biosorbents has been considered an ecofriendly and efficient approach for removing oil. However, most previous studies focused on the modification of the whole CS, which is inefficient due to the heterogeneity of CS. In this study, corn stalk pith (CP), which has excellent amphipathic characteristics, was selected to prepare a high-efficienc...     

Activation of sulfite by metal-organic framework-derived cobalt nanoparticles for organic pollutants removal

Sulfite (SO₃²⁻) activation is one of the most potential sulfate-radical-based advanced oxidation processes, and the catalysts with high efficiency and low-cost are greatly desired. In this study, the cobalt nanoparticles embedded in nitrogen-doped graphite layers (Co@NC), were used to activate SO₃²⁻ for removal of Methyl Orange in aqueous solution. The Co@NC catalysts were synthesized via pyrolysis of Co²⁺-based metal-organic framework (Co-MOF), where CoO was firstly formed at 400℃ and then partially reduced to Co nanoparticles embedded in carbon layers at 800℃. The Co@NC catalysts were more active than other cobalt-based catalysts such as Co²⁺, Co₃O₄ and CoFe₂O₄, due to the synergistic effect of metallic Co and Co_xO_y. A series of chain reaction between Co species and dissolved oxygen was established, with the production and transformation of SO₃^•−, SO₅²⁻, and subsequent active radicals SO₄^•− and HO•. In addition, HCO₃⁻ was found to play a key role in the reaction by complexing with Co species on the surface of the catalysts. The results provide a new promising strategy by using the Co@NC catalyst for SO₃²⁻ oxidation to promote organic pollutants degradation.     

Mechanochemical synthesis of MAPbBr3/carbon sphere composites for boosting carrier-involved superoxide species

Lead halide perovskites MAPbX₃ (MA = CH₃NH₃ or Cs; X = I, Br, Cl) are well considered to be potential candidates for photocatalytic reaction due to its excellent photoelectrical properties, but they still suffer from the low charge separation efficiency and slow catalytic reaction dynamics. To tackle the drawbacks, herein, MAPbBr₃/carbon sphere (CS) composite photocatalysts using glucose as the carbon source were elaborately designed and fabricated via a dry mechanochemical grinding process. The interfacial interaction Pb-O-C chemical bonds were constructed between MAPbBr₃ and the carbon sphere surface containing organic functional groups. By optimizing the content of CSs, the enhanced photocatalytic degradation kinetic rate of Malachite Green (MG) pollutants (92% within 20 min) for MAPbBr₃/CS_x (x = 17 wt.%) is about 3.6-fold of that for pristine MAPbBr₃, which is attributed to the corporative adsorption and enhanced carrier transportation and separation of MAPbBr₃/CS_x. Furthermore, the possible degradation mechanism was proposed on basis of the electrochemical, mass spectrometry and optical characterization results. Owing to the robust interfacial interaction, effective electron extraction rate (k_et = 4.6 × 10⁷ sec^?1) from MAPbBr₃ to CS can be established, which driven oxygen activation where superoxide radicals (?O₂^?) played an important role in MG degradation. It is expected that mechanochemistry strategy may provide a new route to design efficient lead halide perovskite-carbon or metal oxide or sulfide composite photocatalysts.     

Efficient removal of polybrominated diphenyl ethers from soil washing effluent by dummy molecular imprinted adsorbents: Selectivity and mechanisms

Surfactant enhanced elution is an effective method for removing hydrophobic organic pollutants from soils. The key to the development of leaching technology is selective removal of targeted pollutants in soil washing effluent and recycling of surfactant solutions. In this study, a molecular imprinting technique was applied to selectively sorb polybrominated diphenyl ethers (PBDEs) in soil washing effluent. The novel molecular imprinted polymers (MIPs) using different template molecules were synthesized by precipitation polymerization. Adsorption behaviors and mechanisms of MIPs were studied through experiments and theoretical calculations. The results show that 4-bromo-4′-hydroxybiphenyl and toluene can be effective imprinting molecule for MIPs synthesis. The maximal adsorption capacity of selected dummy molecular imprinted polymer (D₁-MIP) was 1032.36 µmol/g, and that of part molecular imprinted polymer (P-MIP) was 981.13 µmol/g. Their imprinting factors in 5 PBDEs adsorption ranged from 2.13 to 5.88, the recovery percentage of Triton X-100 can reach 99.09%, confirming the feasibility of reusing surfactant. Various PBDEs could be removed by MIPs, and Quantitative Structure Property Relationship analysis revealed that PBDEs’ molecular volume, planarity, polarity, and hydrophobicity have major influences on their adsorption performance. DFT calculation revealed that Van der Waals force and hydrogen bonding played important roles during selective adsorption. These results can provide effective theoretical guidance for surfactant enhanced soil elution in practical engineering applications.     

Catalytic performance and reaction mechanisms of NO removal with NH3 at low and medium temperatures on Mn-W-Sb modified siderite catalysts

Iron-based catalysts have been explored for selective catalytic reduction (SCR) of NO due to environmentally benign characters and good SCR activity. Mn-W-Sb modified siderite catalysts were prepared by impregnation method based on siderite ore, and SCR performance of the catalysts was investigated. The catalysts were analyzed by X-ray diffraction, H₂-temperature-programmed reduction, Brunauer-Emmett-Teller, Thermogravimetry-derivative thermogravimetry and in-situ diffused reflectance infrared Fourier transform spectroscopy (DRIFTS). The modified siderite catalysts calcined at 450°C mainly consist of Fe₂O₃, and added Mn, W and Sb species are amorphous. 3Mn-5W-1.5Sb-siderite catalyst has a wide temperature window of 180-360°C and good N₂ selectivity at low temperatures. In-situ DRIFTS results show NH₄⁺, coordinated NH₃, NH₂, NO₃⁻ species (bidentate), NO₂⁻ species (nitro, nitro-nitrito, monodentate), and adsorbed NO₂ can be discovered on the surface of Mn-W-Sb modified siderite catalysts, and doping of Mn will enhance adsorbed NO₂ formation by synergistic catalysis with Fe³⁺. In addition, the addition of Sb can inhibit sulfates formation on the surface of the catalyst in the presence of SO₂ and H₂O. Time-dependent in-situ DRIFTS studies also indicate that both of Lewis and Brønsted acid sites play a role in SCR of NO by ammonia at low temperatures. The mechanism of NO removal on the 3Mn-5W-1.5Sb-siderite catalyst can be discovered as a combination of Eley-Rideal and Langmuir-Hinshelwood mechanisms with three reaction pathways. The mechanism of NO, oxidized by synergistic catalysis of Fe³⁺ and Mn^4+/3+ to form NO₂ among three pathways, reveals the reason of high NO_x conversion of the catalyst at medium and low temperatures.

1. Download : Download high-res image (64KB)
2. Download : Download full-size image

     

Simultaneous removal of SO2 and NO using a spray dryer absorption (SDA) method combined with O3 oxidation for sintering/pelleting flue gas

Based on the demand of sintering/pelleting flue gas ultra-low emission,a semi-dry method using a spray dryer absorber (SDA) combined with O₃ oxidation was proposed for simultaneous removal of SO₂ and NO.Effects of O₃ injection site,O₃/NO molar ratio,and spray tower temperature on the removal efficiencies were investigated.It was revealed that both desulfurization and denitrification efficiencies could reach to 85%under the conditions of setting O_3...     

Measurement of tropospheric HO2 radical using fluorescence assay by gas expansion with low interferences

An instrument to detect atmospheric HO₂ radicals using fluorescence assay by gas expansion (FAGE) technique has been developed. HO₂ is measured by reaction with NO to form OH and subsequent detection of OH by laser-induced fluorescence at low pressure. The system performance has been improved by optimizing the expansion distance and pressure, the influence factors of HO₂ conversion efficiency are also studied. The interferences of RO₂ radicals were investigated by determining the conversion efficiency of RO₂ to OH during the measurement of HO₂. The dependence of the conversion of HO₂ on NO concentration was investigated, and low HO₂ conversion efficiency was selected to realize the ambient HO₂ measurement, where the conversion efficiency of RO₂ derived by propane, ethene, isoprene and methanol to OH has been reduced to less than 6% in the atmosphere. Furthermore, no significant interferences from PM_2.5 and NO were found in the ambient HO₂ measurement. The detection limits for HO₂ (S/N = 2) are estimated to 4.8 × 10⁵ cm^?3 and 1.1 × 10⁶ cm^?3 (${\rho }_{\mathrm{H}{\mathrm{O}}_2}$= 20%) under night and noon conditions, with 60 sec signal integration time. The instrument was successfully deployed during STORM-2018 field campaign at Shenzhen graduate school of Peking University. The concentration of atmospheric HOx radical and the good correlation of OH with j(O¹D) was obtained here. The diurnal variation of HOx concentration shows that the OH maximum concentration of those days is about 5.3 × 10⁶ cm^?3 appearing around 12:00, while the HO₂ maximum concentration is about 4.2 × 10⁸ cm^?3 appearing around 13:30.     

Synthesis of hierarchical porous carbon with high surface area by chemical activation of(NH4)2C2O4 modified hydrochar for chlorobenzene adsorption

In this work,hydrothermal technique combined with KOH activation were employed to develop a series of porous carbons (NPCK-x) using tobacco stem as a low-cost carbon source and (NH₄)₂C₂O₄ as a novel nitrogen-doping agent.Physicochemical properties of NPCK-x were characterized by Brunauer-Emmett-Teller,field emission scanning electron microscopy,X-ray diffraction,Raman microscope,elemental analysis,and X-ray photoelectron spectroscopy.Results showed tha...     

In situ preparation of g-C3N4/polyaniline hybrid composites with enhanced visible-light photocatalytic performance

The graphic carbon nitride/polyaniline (g-C₃N₄/PANI) hybrid composites were successfully synthesized by a facile in situ polymerization process under ice water bath. The photocatalytic activities of the g-C₃N₄/PANI composites were evaluated by using oxytetracycline (OTC) as model pollutants. The optimal g-C₃N₄/PANI composite (5%PANI: the g-C₃N₄/PANI hybrid with 5 wt.% of PANI) showed an enhancement degradation rate of 5-fold compared to that of conventional g-C₃N₄ under simulated-sunlight irradiation. In addition, the 5%PANI demonstrate significantly photocatalytic evolution H₂ rate (163.2 μmol/(g?hr)) under the visible light irradiation. Furthermore, based on the results of optical performance and electrochemical testing, a possible mechanism was proposed, indicating that the incorporation of PANI into the traditional g-C₃N₄ can effectively tune the electronic structures, improve the photo-generated electrons-holes separation and enhance extensive absorption of visible light. Such a g-C₃N₄/PANI hybrid nanocomposites could be envisaged to possess great potentials in practical wastewater treatment and water splitting.     

A novel and stretchable carbon-nanotube/Ni@TiO2:W photocatalytic composite for the complete removal of diclofenac drug from the drinking water

We present the structural, morphological and photocatalytic properties of stretchable composites made with carbon nanotubes (CNTs), silicon rubber and Ni@TiO₂:W nanoparticles (TiWNi NPs) with average size of 37 ± 2 nm. Microscopy images showed that the TiWNi NPs decorated the surface of the CNT fibers, which are oriented in a preferential direction. TiWNi NPs presented a mixture of anatase/rutile phases with cubic structure. The performance of the TiWNi powders and stretchable composites was evaluated for the photocatalytic degradation of diclofenac (DCF) anti-inflammatory drug under ultraviolet-visible light. The results revealed that the maximum DCF degradation percentages were 34.6%, 91.9%, 97.1%, 98.5% and 100% for the CNT composite (stretched at 0%), TiWNi powders, CNT + TiWNi (stretched at 0%), CNT + TiWNi (stretched at 50%) and CNT + TiWNi (stretched at 100%), respectively. Thus, stretching the CNT + TiWNi composites was a good strategy to enhance the DCF degradation percentage from 97.1% to 100%, since stretching created additional defects (oxygen vacancies) that acted as electron sink, delaying the electron-hole recombination, and favors the DCF degradation. Raman/absorbance measurements confirmed the presence of such defects. Moreover, the reactive oxygen species (ROS) were determined by the scavenger's experiments and found that the main ROS were the ·OH and O₂⁻ radicals, which attacked the DCF molecules, causing their degradation. The results of this investigation confirmed that the stretchable CNT/TiWNi-based composites are a viable alternative to remove pharmaceutical contaminants from water and can be manually separated from the decontaminated water, which is unviable using photocatalytic powders.     

Enhanced the photoelectrochemical performance of Bi2XO6 (X = W, Mo) for detecting hexavalent chromium by modification of CuS

In this work, Bi₂XO₆ (X = W, Mo) are synthesized at different temperatures. The results of tests find the optimal temperatures of Bi₂WO₆ and Bi₂MoO₆ are 180 and 160°C (BW-180, BM-160). Then, BW-180 and BM-160 are further compounded with different contents of CuS. The results of photoelectrochemical (PEC) tests show that CuS can improve the PEC performance of semiconductor materials, and it has better performance when CuS mass fraction is 5%. These maybe the photoelectron potentials generated by CuS/Bi₂XO₆ (X = Mo, W) heterojunction reduce the combination of photogenerated electrons and holes. When the PEC sensor based on 5%-CuS/BW-180 detects Cr(VI), it has a linear range of 1–80 μmol/L with detection limit of 0.95 μmol/L, while the PEC sensor based on 5%-CuS/BM-160 detects Cr(VI) has a linear range of 0.5–230 μmol/L and a detection limit of 0.12 μmol/L. Thus, 5%-CuS/Bi₂XO₆ has potential application in hexavalent chromium detection.     

Migration and transformation of Sb are affected by Mn(III/IV) associated with lepidocrocite originating from Fe(II) oxidation

Antimony (Sb) is a recognized priority pollutant with toxicity that is influenced by its migration and transformation processes. Oxidation of Fe(II) to Fe(III) oxides, which is a common phenomenon in the environment, is often accompanied by the formation of Mn(III/IV) and might affect the fate of Sb. In this study, incorporated Mn(III) and sorbed/precipitated Mn(III/IV) associated with lepidocrocite were prepared by adding Mn(II) during and after Fe(II) oxidation, respectively, and the effects of these Mn species on Sb fate were investigated. Our results indicated that the association of these Mn species with lepidocrocite obviously enhanced Sb(III) oxidation to Sb(V), while concomitantly inhibiting Sb sorption due to the lower sorption capacity of lepidocrocite for Sb(V) than Sb(III). Additionally, Mn oxide equivalents increased in the presence of Sb, indicating that Sb oxidation by Mn(III/IV) associated with lepidocrocite was a continuous recycling process in which Mn(II) released from Mn(III/IV) reduction by Sb(III) could be oxidized to Mn(III/IV) again. This recycling process was favorable for effective Sb(III) oxidation. Moreover, Sb(V) generated from Sb(III) oxidation by Mn(III/IV) enhanced Mn(II) sorption at the beginning of the process, and thus favored Mn(III/IV) formation, which could further promote Sb(III) oxidation to Sb(V). Overall, this study elucidated the effects of Mn(III/IV) associated with lepidocrocite arisen from Fe(II) oxidation on Sb migration and transformation and revealed the underlying reaction mechanisms, contributing to a better understanding of the geochemical dynamics of Sb.     

Graphitic carbon nitride/biochar composite synthesized by a facile ball-milling method for the adsorption and photocatalytic degradation of enrofloxacin

In order to enhance the removal performance of graphitic carbon nitride (g-C₃N₄) on organic pollutant, a simultaneous process of adsorption and photocatalysis was achieved via the compounding of biochar and g-C₃N₄. In this study, g-C₃N₄ was obtained by a condensation reaction of melamine at 550°C. Then the g-C₃N₄/biochar composites were synthesized by ball milling biochar and g-C₃N₄ together, which was considered as a simple, economical, and green strategy. The characterization of resulting g-C₃N₄/biochar suggested that biochar and g-C₃N₄ achieved effective linkage. The adsorption and photocatalytic performance of the composites were evaluated with enrofloxacin (EFA) as a model pollutant. The result showed that all the g-C₃N₄/biochar composites displayed higher adsorption and photocatalytic performance to EFA than that of pure g-C₃N₄. The 50% g-C₃N₄/biochar performed best and removed 45.2% and 81.1% of EFA (10 mg/L) under darkness and light with a dosage of 1 mg/mL, while g-C₃N₄ were 19.0% and 27.3%, respectively. Besides, 50% g-C₃N₄/biochar showed the highest total organic carbon (TOC) removal efficiency (65.9%). Radical trapping experiments suggested that superoxide radical (?O₂^?) and hole (h⁺) were the main active species in the photocatalytic process. After 4 cycles, the composite still exhibited activity for catalytic removal of EFA.     

VxMn(4 − x)Mo3Ce3/Ti catalysts for selective catalytic reduction of NO by NH3

A series of vanadium based catalysts(VxMn(4-x)Mo3Ce3/Ti) with different vanadium(x wt.%) and manganese((4-x) wt.%) contents have been prepared by the wet impregnation method and investigated for selective catalytic reduction(SCR) of NO_x by NH_3 in the presence of 8 vol.% H_2O and 500 ppm V SO_2.The physicochemical characteristics of the catalysts were thoroughly characterized.The SCR of NO_x by NH_3(NH_3-SCR) activity, especially the low-temperature activity, significantly increased with increasing V_2O_5 content in the catalyst until the V_2O_5 content reached 1.5 wt.%, which corresponds well with the redox properties of the catalyst.All of the metal oxides were well dispersed and strongly interacted with each other on the catalyst surface.V mainly exists in the V~(5+)state in the catalysts.The strong synergistic effect between the vanadium and cerium species led to formation of more Ce~(3+)species, and that between the vanadium and manganese species contributed to formation of more manganese species with low valences.All of the catalysts exhibited strong acidity, while the redox properties determined the NH_3-SCR activity, especially the low-temperature activity.H_2O and SO_2 had severe inhibiting effects on the activity of V1.5Mn2.5Mo3Ce3/Ti.However, good H_2O and SO_2 resistance and high NO_x conversion by V1.5Mn2.5Mo3Ce3/Ti could be achieved in the presence of SO_2 and almost no decline was observed in a long-term test at 275℃ for 168 hr in the presence of SO_2 and H_2O, which can be attributed to the sulfate species formed on the catalyst surface.