Analysis of accumulation, extractability, and metabolization of five different phenylarsenic compounds in plants by ion chromatography with mass spectrometric detection and by atomic emission spectroscopy

Phenylated arsenic compounds occur as highly toxic contaminants in former military areas where they were formed as degradation products of chemical warfare agents. Some phenylarsenic compounds such as roxarsone and aminophenylarsonic acids were applied as food additive and veterinary drugs in stock-breeding and therefore pose an environmental risk in agricultural used sites. Very few data exist in the literature concerning uptake and effects of phenylarsenic compounds in plants growing on contaminated soils. In this study, the accumulation, extractability, and metabolization of five different phenylarsenic compounds, phenylarsonic acid, p- and o-aminophenylarsonic acid, phenylarsine oxide, and 3-nitro-4-hydroxyphenylarsonic acid called roxarsone, by the terrestrial plant Tropaeolum majus were investigated. Ion chromatography coupled to inductively coupled plasma mass spectrometry was used to differentiate these arsenic compounds, and inductively coupled plasma atomic emission spectroscopy was used for total arsenic quantification. All compounds considered were taken up by the roots and transferred to stalks, leaves, and flowers. The strongest accumulation was observed for unsubstituted phenylarsonic acid followed by its trivalent analogue phenylarsine oxide that was mostly oxidized in soil whereas the amino- or nitro- and hydroxy-substituted phenylarsonic acids were accumulated to a smaller degree.The highest extraction yield of 90% for ground leaf material was achieved by 0.1 M phosphate buffer, pH 7.7, in a two-step extraction with a total extraction time of 24 h. The extraction of higher amounts of arsenic (50–70% of total arsenic present in leaves depending on arsenic species application) from non-ground intact leaves with deionized water in comparison with the buffer (20–40% of total arsenic) is ascribed to osmotic effects. The arsenic species analysis revealed a cleavage of the amino groups from the phenyl ring for plants treated with aminophenylarsonic acids. A further important metabolic effect consisted in the production of inorganic arsenate and arsenite from the phenylated arsonic acid groups.     

Concentrations and speciation of arsenic in groundwater polluted by warfare agents

Groundwater polluted with phenylarsenicals from former warfare agent deposits and their metabolites was investigated with respect to the behavior of relevant arsenic species. Depth profiles at the estimated source and at about 1 km downgradient from the source zone were sampled. The source zone is characterized by high total arsenic concentrations up to 16 mg L⁻¹ and is dominated by organic arsenic compounds. The concentrations in the downgradient region are much lower (up to 400 μg L⁻¹) and show a high proportion of inorganic arsenic species. Iron precipitation seems to be an effective mechanism to prevent dispersion of inorganic arsenic as well as phenylarsonic acid. Reductive conditions were observed in the deeper zone with predominant occurrence of trivalent arsenic species. The inorganic species are in redox equilibrium, whereas the phenylarsenic compounds have variable proportions. Methylphenylarsinic acid was identified in groundwater in traces which indicates microbial degradation activity.     

Arsenic in marine sediments from French Mediterranean ports: Geochemical partitioning,bioavailability and ecotoxicology

This work investigates arsenic mobility, bioavailability and toxicity in marine port sediments using chemical sequential extraction and laboratory toxicity tests. Sediment samples were collected from two different Mediterranean ports, one highly polluted with arsenic and other inorganic and organic pollutants (Estaque port (EST)), and the other one, less polluted, with a low arsenic content (Saint Mandrier port (SM)). Arsenic distribution in the solid phase was studied using a sequential extraction procedure specifically developed for appraising arsenic mobility in sediments. Toxicity assessment was performed on sediment elutriates, solid phases and aqueous arsenic species as single substance using the embryo-toxicity test on oyster larvae (Crassostrea gigas) and the Microtox test with Vibrio fischeri. Toxicity results showed that all sediment samples presented acute and sub-chronic toxic effects on oyster larvae and bacteria, respectively. The Microtox solid phase test allow to discriminate As-contaminated samples from the less contaminated ones, suggesting that toxicity of whole sediment samples is related to arsenic content. Toxicity of dissolved arsenic species as single substance showed that Vibrio fischeri and oyster larvae are most sensitive to As(V) than As(III). The distribution coefficient (Kd) of arsenic in sediment samples was estimated using results obtained in chemical sequential extractions. The Kd value is greater in SM (450 L kg^?1) than in EST (55 L kg^?1), indicating that arsenic availability is higher for the most toxic sediment sample (Estaque port). This study demonstrates that arsenic speciation play an important role on arsenic mobility and its bioavailability in marine port sediments.     

Semivolatile behavior of dicarboxylic acids and other polar organic species at a rural background site (Nylsvley,RSA)

In this study aerosol samples from the South African savanna were analyzed for their polar organic constituents. Samples were collected with a front/back-up filter tandem system of quartz fiber filters (dual filter strategy). In all samples (n=15) dicarboxylic acids and a variety of phthalates, aldehydes and monocarboxylic acids were observed. Oxalic acid was the dominating compound with an average amount of 79.2 ng m⁻³ on the front filter and 11.3 ng m⁻³ on the back-up filter. The presence of significant concentrations of dicarboxylic acids on the back-up filter was rather unexpected. There are two possible sources to explain the presence of individual compounds on the back-up filter – particle penetration through the front filter or adsorption of compound parts from the gas phase. Interpretation of the data indicates that the dicarboxylic acid concentrations on the back-up filters appear to be caused by the adsorption of gaseous organic species. Dicarboxylic acids semivolatilic behavior is evident with this results. This conclusion refutes the commonly held view that dicarboxylic acids in the atmosphere were associated with the aerosol phase only. Additionally, it was found that the distribution of dicarboxylic acids between the gas and particle phase in the atmosphere is not only dependent on their vapor pressures. The actual gas phase concentration appears to be more determined by the chemical properties of the particles than by pure physical influences. Surprisingly, malonic acid exhibits an anomaly, as it does not show a semivolatile tendency.     

Identification of dicarboxylic acids and aldehydes of PM10 and PM2.5 aerosols in Nanjing,China

In this study aerosol samples of PM10 and PM2.5 collected from 18 February 2001 to 1 May 2001 in Nanjing, China were analyzed for their water-soluble organic compounds. A series of homologous dicarboxylic acids (C_2–10) and two kinds of aldehydes (methylglyoxal and 2-oxo-malonaldehyde) were detected by GC and GC/MS. Among the identified compounds, the concentration of oxalic acid was the highest at all the five sites, which ranged from 178 to 1423 ng/m³. The second highest concentration of dicarboxylic acids were malonic and succinic acids, which ranged from 26.9 to 243 ng/m³. Higher level of azelaic acid was also observed, of which the maximum was 301 ng/m³. As the highest fraction of dicarboxylic acids, oxalic acid comprised from 28% to 86% of total dicarboxylic acids in PM10 and from 41% to 65% of total dicarboxylic acids in PM2.5. The dicarboxylic acids (C₂, C₃, C₄) together accounted for 38–95% of total dicarboxylic acids in PM10 and 59–87% of dicarboxylic acids in PM2.5. In this study, the total dicarboxylic acids accounted for 2.8–7.9% of total organic carbon (TOC) of water-soluble matters for PM10 and 3.4–11.8% of TOC for PM2.5. All dicarboxylic acids detected in this study together accounted for about 1% of particle mass. The concentration of azelaic acid was higher at one site than others, which may be resulted from higher level of volatile fat used for cooking. The amounts of dicarboxyic acids (C_2,3,4,9) and 2-oxo-malonaldehyde of PM2.5 were higher in winter and lower in spring. Compared with other major metropolitans in the world, the level of oxalic acid concentration of Nanjing is much higher, which may be contributed to higher level of particle loadings, especially for fine particles.     

Arsenic Background Concentrations in Florida,U.S.A. Surface Soils: Determination and Interpretation

Background concentrations of soil arsenic have been used as an alternative soil cleanup criterion in many states in the U.S. This research addresses issues related to the interpretation of background concentrations of arsenic in near pristine soils in Florida. Total arsenic was measured in 448 taxonomic and geographic representative surface soil samples using USEPA Method 3052 (HCl-HNO₃-HF, microwave digestion) and graphite furnace atomic absorption spectrophotometry analysis procedure. Values were log-normally distributed, with geometric mean and baseline concentration (defined as 95% of the expected range of background concentrations) providing the most satisfactory statistical results. An upper baseline concentration of 6.21 mg As/kg was estimated for undisturbed soils (n = 267) compared to 7.63 mg As/kg for disturbed soils (n = 181). Temporal trend of total soil arsenic concentrations from 1967 to 1989 paralleled decreased usage of arsenic in U.S. agriculture. Soil arsenic background concentrations were generally higher in south Florida than in north and central Florida, and associated with wet soils. Individual high arsenic sites were scattered throughout the state, but the most highly concentrated of these occurred in the Leon-Lee belt along the Ocala uplift district extending to the southwestern flatwoods district. Extrapolation of the data using a single arsenic value regardless of the taxonomic and geographical differences in soil arsenic distribution would underestimate potential arsenic contamination in upland soils.     

Emissions of volatile fatty acids from feed at dairy facilities

Recent studies suggest that dairy operations may be a major source of non-methane volatile organic compounds in dairy-intensive regions such as Central California, with short chain carboxylic acids (volatile fatty acids or VFAs) as the major components. Emissions of four VFAs (acetic acid, propanoic acid, butanoic acid and hexanoic acid) were measured from two feed sources (silage and total mixed rations (TMR)) at six Central California Dairies over a fifteen-month period. Measurements were made using a combination of flux chambers, solid phase micro-extraction fibers coupled to gas chromatography mass spectrometry (SPME/GC–MS) and infra-red photoaccoustic detection (IR-PAD for acetic acid only). The relationship between acetic acid emissions, source surface temperature and four sample composition factors (acetic acid content, ammonia-nitrogen content, water content and pH) was also investigated. As observed previously, acetic acid dominates the VFA emissions. Fluxes measured by IR-PAD were systematically lower than SPME/GC–MS measurements by a factor of two. High signals in field blanks prevented emissions from animal waste sources (flush lane, bedding, open lot) from being quantified. Acetic acid emissions from feed sources are positively correlated with surface temperature and acetic acid content. The measurements were used to derive a relationship between surface temperature, acetic acid content and the acetic acid flux. The equation derived from SPME/GC–MS measurements predicts estimated annual average acetic acid emissions of (0.7 + 1/?0.4) g m^?2 h^?1 from silage and (0.2 + 0.3/?0.1) g m^?2 h^?1 from TMR using annually averaged acetic acid content and meteorological data. However, during the summer months, fluxes may be several times higher than these values.     

Distribution and relationships of As,Cd, Pb and Hg in freshwater fish from five French fishing areas

The concentrations of arsenic, cadmium, mercury and lead in 149 muscle samples of eight freshwater fish species (European eel, bream, common carp, European catfish, roach, perch, pike and pikeperch) from five different French fishing areas from contaminated and control sites were measured by inductively coupled plasma mass spectrometry after microwave digestion under pressure. No significant correlation was found between the condition factor (CF), based on the length–mass relationship, and As, Cd and Pb levels in all the samples analysed, but a positive correlation was detected between CF and Hg levels (P < 0.0001, R = 0.49). Positive correlations with body length were only found for Hg in roach (P < 0.05, R = 0.32) and Pb in bream (P < 0.05, R = 0.48) and correlations with both body weight and length were also found for Hg in pike (P < 0.05, R = 0.90 and 0.86) and Cd in European eel (P < 0.01, R = ?0.35 and ?0.37). The average content and the standard deviation in fish muscle samples was 0.007 ± 0.012, 0.102 ± 0.077, 0.142 ± 0.097 and 0.035 ± 0.053 mg kg^?1 of wet mass for Cd, As, Hg and Pb, respectively. Significant differences were established between groups of predatory fish and non-predatory fish for Hg and Pb, and between control and contaminated sites in the whole selection and also within feeding guilds, i.e. the values of Hg in the benthophagic fish were significantly different between these sites. Finally, these results were also compared for each species with previous French and European studies.     

Factors controlling the emissions of volatile organic acids from leaves of Quercus ilex L. (Holm oak)

Direct emissions and emission of precursor compounds of acetic and formic acid from higher plants are a significant source of these acids in the atmosphere. To travel from the plant cell to the atmosphere, a gas molecule must first leave the liquid phase and then enter the internal leaf gas phase. The apoplast (cell wall) is the last barrier before the molecule can escape through the stomata. During field experiments we monitored the gas exchange (H₂O, CO₂, organic acids) of Quercus ilex L. leaves. The exchange rates of acetic and formic acid under field conditions followed a typical diurnal pattern and ranged between −10 (uptake) and 52 (emission) nmol m^-2 leaf area min^-1 with the maximum around noon. Growth chamber experiments indicate that the emission is related to the stomatal conductance. We discussed the exchange rate of organic acids between the cell wall and the atmosphere in connection with Henry’s law, and the physicochemical conditions in the cell wall. The evaluation showed that for apoplastic pH values between 4 and 5, 26–130% of the measured acetic acid emission based on leaf area could be predicted.     

Size distributions and formation of dicarboxylic acids in atmospheric particles

The PM2.5 concentrations and the size distributions of dicarboxylic acids in Hong Kong were studied. Eleven sets of daily PM2.5 samples were obtained at a downtown sampling site during the period of 5–16 December 2000 using an R&P speciation PM2.5 sampler. About 6–12% of the total oxalic acid was found in the gas phase in some samples. A good correlation between succinate and sulfate (R²=0.88) and a moderate correlation between oxalate and sulfate (R²=0.74) were found. Sampling artifacts of oxalate, malonate and succinate were found to be negligible. A total of 18 sets of 48–96 h size distribution data on dicarboxylic acids, sulfate, nitrate and sodium at an urban site and a rural site from June 2000 to May 2001 were obtained using a Micro-Orifice Uniform Deposit Impactor. Data from both sites show similar size distribution characteristics of the dicarboxylic acids. The condensation mode of oxalate was usually observed at 0.177–0.32 μm. The location of the peak of the droplet mode of oxalate was associated with that of sulfate. When the peak of sulfate in the droplet mode appeared at 0.32–0.54 μm, the peak of oxalate sometimes appeared at 0.32–0.54 μm and sometimes shifted to 0.54–1.0 μm. When the peak of sulfate in the droplet mode appeared at 0.54–1.0 μm, the peak of oxalate sometimes appeared at 0.54–1.0 μm and sometimes shifted to 1.0–1.8 μm. Oxalate, succinate and sulfate found in the droplet mode were attributed to in-cloud formation. The slight shift of the oxalate peak from 0.32–0.54 to 0.54–1.0 μm or from 0.54–1.0 to 1.0–1.8 μm was ascribed to minor oxalate evaporation after in-cloud formation. The maximum peak of malonate sometimes appeared in the droplet mode and sometimes appeared at 3.1–6.2 μm. The formation of malonate is associated to the reactions between sea salt and malonic acid.     

Comparison of organic compositions in dust storm and normal aerosol samples collected at Gosan,Jeju Island,during spring 2005

To better understand the current physical and chemical properties of East Asian aerosols, an intensive observation of atmospheric particles was conducted at Gosan site, Jeju Island, South Korea during 2005 spring. Total suspended particle (TSP) samples were collected using pre-combusted quartz filters and a high-volume air sampler with the time intervals ranging from 3 h to 48 h. The kinds and amount of various organic compounds were measured in the samples using gas chromatography–mass spectrometry. Among the 99 target compounds detected, saccharides (average, 130 ± 14 ng m^?3), fatty acids (73 ± 7 ng m^?3), alcohols (41 ± 4 ng m^?3), n-alkanes (32 ± 3 ng m^?3), and phthalates (21 ± 2 ng m^?3) were found to be major compound classes with polyols/polyacids, lignin and resin products, PAHs, sterols and aromatic acids being minor. Compared to the previous results reported for 2001 late spring samples, no significant changes were found in the levels of their concentrations and compositions for 4 years, although the economy in East Asia, especially in China, has sharply expanded from 2001 to 2005. During the campaign at Gosan site, we encountered two distinct dust storm episodes with high TSP concentrations. The first dust event occurred on March 28, which was characterized by a predominance of secondary organic aerosols. The second event that occurred on the next day (March 29) was found to be characterized by primary organic aerosols associated with forest fires in Siberia/northeastern China. A significant variation in the molecular compositions, which was found within a day, suggests that the compositions of East Asian aerosols are heterogeneous due to multi-contributions from different source regions together with different pathways of long-range atmospheric transport of particles.     

Wet deposition of low molecular weight mono- and di-carboxylic acids,aldehydes and inorganic species in Los Angeles

About 60 rainwater samples were collected at west Los Angeles, California in 1981–1984 and were analyzed for C₁–C₉ monocarboxylic acids (0.33–79 μM, average (av.) 13±15 μM), C₂–C₁₀ dicarboxylic acids (2.9–51 μM, av. 7.5±14 μM) and C₁–C₄ aldehydes (0.85–28 μM, av. 9.2±11 μM). Distributions of monocarboxylic acids show a predominance of formic (average concentration: 6.5 μM) and acetic (av. 5.6 μM) acids followed by propionic acid (av. 0.44 μM). Oxalic acid is the dominant diacid (av. 3.9 μM) followed by succinic acid (av. 1.0 μM). Formaldehyde (av. 6.9 μM) is the dominant aldehyde, with the next most abundant, acetaldehyde, being minor (av. 0.65 μM). For select rain samples described in this paper, were found to comprise monocarboxylic acids 0.9–12.3% (av. 4.4±3.4%), diacids comprise 1.2–9.5% (av. 4.2±3.3%) and aldehydes comprise 0.2–6.2% (av. 2.1±2.2%) of total organic carbon (TOC, 2.0–18.6 mg C l⁻¹; av. 9.8±5.4 mg C l⁻¹). Annual rain fluxes of monocarboxylic acids and aldehydes during 1982–1983 were calculated to be 0.24 and 0.11 g m⁻² yr⁻¹, respectively, with an annual estimated wet deposition in the Los Angeles Basin of 3120 and 1430 tons, respectively. These fluxes are equivalent to 2500 times of the acids and 2.5 times of the aldehydes emitted from automobile exhausts in the Los Angeles air basin. This comparison suggests that major portions of the carboxylic acids detected in the rain are not directly emitted from auto-exhausts, but are most likely produced in the atmosphere by gaseous and/or aqueous phase photo-induced reactions.     

Simultaneous reduction of Cr(VI) and oxidation of As(III) by Bacillus firmus TE7 isolated from tannery effluent

Hexavalent chromium [Cr(VI)] and arsenite [As(III)] are the most toxic forms of chromium and arsenic respectively, and reduction of Cr(VI) to Cr(III) and oxidation of As(III) to As(V) has great environmental implications as they affect toxicity and mobility of these toxic species. Bacillus firmus strain TE7, resistant to chromium and arsenic was isolated from tannery effluent. The strain exhibited ability to reduce Cr(VI) and oxidize As(III). It reduced 100 mg L^?1 Cr(VI) within 60 h in nutrient broth and oxidized 150 mg L^?1 As(III) within 10 h in minimal medium. It also completely reduced 15 mg L^?1 Cr(VI) and oxidized 50 mg L^?1 of As(III) simultaneously in minimal medium. To the best of our knowledge, this is the first bacterial strain showing simultaneous reduction of Cr(VI) and oxidation of As(III) and is a potential candidate for bioremediation of environments contaminated with these toxic metal species.     

Photochemical production and loss of organic acids in high Arctic aerosols during long-range transport and polar sunrise ozone depletion events

Unique daily measurements of water-soluble organics in fine (<2 μm) and coarse (>2 μm) aerosols were conducted at Alert in the Canadian Arctic in winter to spring of 1992. They yield insight into photochemical production and loss of organics during long-range transport and ozone depletion events following polar sunrise. Comprehensive analyses of α, ω-dicarboxylic acids (C₂–C₁₂), ω-oxocarboxylic acids (C₂–C₉) and α-dicarbonyls (C₂, C₃) as well as pyruvic acid and aromatic (phthalic) diacid were conducted using GC and GC/MS techniques. Oxalic (C₂) acid was generally the dominant diacid species in both fine and coarse fractions, followed by malonic (C₃) and succinic (C₄) acids. Concentrations of total diacids in the fine aerosol fraction (0.2–64 ng m⁻³) were 5–60 times higher than those in the coarse fraction (0.01–3 ng m⁻³). After polar sunrise in early-March, the total concentration of fine aerosol diacids increased by a factor of 3–5 while the coarse mode did not change significantly. From dark winter to sunlit spring, temporal changes in correlations and ratios of these water-soluble organics to vanadium and sulfate measured simultaneously suggest that atmospheric diacids and related organic compounds are largely controlled by long-range atmospheric transport of polluted air during winter, but they are significantly affected by photochemical production. The latter can occur in sunlight either during transport to the Arctic or during photochemical events associated with surface ozone depletion and bromine chemistry near Alert in spring. Conversion of gaseous precursors to particulate matter via photochemical oxidation was intensified at polar sunrise, resulting in a peak in the ratio of total diacids to V. During ozone depletion events, complex patterns are indicated in photochemical production and loss depending on the diacid compound. Unsaturated (maleic and phthalic) diacids were inversely correlated with particulate Br whereas saturated diacids (C₂–C₄) positively correlated with particulate Br. These results suggest that Br chemistry associated with ozone depletion leads to degradation of unsaturated diacids and to the production of smaller saturated diacids.     

Analysis,occurrence and fate of commonly used pharmaceuticals and hormones in the Buyukcekmece Watershed,Turkey

The occurrence of 14 mostly used pharmaceuticals from different classes (antibiotics, β-blockers, non-steroidal anti-inflammatory drugs, and stimulant) and hormones in surface water in Istanbul, Turkey was investigated in this study. An important drinking water source, Buyukcekmece Lake and main rivers flowing into the lake were selected for the monitoring of the compounds. Sampling was conducted five different times in a year in order to observe seasonal changes. A rapid, robust and sensitive method using solid phase extraction and ultra-performance liquid chromatograph coupled with triple quadrupole tandem mass spectrometer was established for quantification of both pharmaceuticals and hormones. Limit of quantifications were between 0.5 and 1.1 ng L^?1. Recoveries were between 72–119% and 61–98% for ultra-pure water and for surface water, respectively. All selected compounds were detected at least once in the samples. Some pharmaceuticals were detected as high as a few of micrograms per liter levels in the rivers. Most frequently detected compounds were caffeine and antibiotics (amoxicillin, ciprofloxacin, erythromycin and sulfamethoxazole). Synthetic hormone (17α-ethynylestradiol) was detected only 4 times corresponding least detected compound in whole sampling period. Field data confirms that amoxicillin is more prone to degradation with respect to other antibiotics. Estrone and 17-β estradiol are converted to estriol by natural processes in surface water.     

Characterization of odor released during handling of swine slurry: Part II. Effect of production type,storage and physicochemical characteristics of the slurry

The quality of rural life can be affected by offensive odors released from animal buildings and storage units. The objectives of this study were to compare the concentrations of odor and odorants above different types of stirred swine slurry to analyze the relationships between concentrations of odor (and odorants) and physicochemical characteristics of the slurry (i.e. pH, temperature, dry matter, volatile solids, and concentration of 22 chemical compounds); and to propose predictive models for the odor concentration (OC) based on these physicochemical characteristics (solely and in combination with concentrations of specific odorants in the air above the slurries). The study comprised data on concentrations of odor and odorants in the air above slurry samples (fresh and/or stored) collected from production units with farrowing sows, finishing swines, or weaning pigs at eight swine operations (N = 48). OC measured in the air above stirred swine slurry samples were not significantly different among production types or storage times. The physicochemical characteristics of the slurries were not useful for predicting OC or concentrations of hydrogen sulfide (or organic sulfides) above the slurry, but were related to concentrations of other emitted gases such as phenols and indoles (r² = 0.65–0.79, p <0.05), ammonia (r² = 0.86, p < 0.05) and carboxylic acids (r² = 0.23–0.59, p <0.05). There was good precision of predictive models of OC based on selected slurry characteristics (i.e. pH, dry matter, nitrogen content, sulfur content or concentrations of individual aromatic compounds and carboxylic acids) together with concentrations of specific odorants in the air (e.g. hydrogen sulfide) (r² between 0.70 and 0.92). This study suggests that predictive models could be useful for evaluating odor nuisance potentials of swine slurry during handling.     

The environmental photolysis of perfluorooctanesulfonate,perfluorooctanoate, and related fluorochemicals

A field study on the photolysis of perfluoroalkyl substances (PFASs) was conducted at high altitudes in Mt. Mauna Kea (Hawaii, USA; 4200 m) and Mt. Tateyama (Toyama, Japan; 2500 m). Results of photolysis of PFASs in the field were further confirmed in laboratory studies. Perfluorooctanesulfonate (PFOS), which is perceived as a non-degradable chemical in the environment, can undergo photolysis. Long chain PFASs can be successively dealkylated to short chain compounds such as perfluorobutyric acid (PFBA) and perfluorobutane sulfonate (PFBS), but the short chain compounds were relatively more resistant to photodegradation. These results suggest that environmental levels of short chain PFASs would increase both due to their formation from photolysis of long chain PFASs and from direct releases. Earlier studies on photolysis of PFASs were focused on the formation of perfluorocarboxylic acids (PFCAs) and perfluorosulfonic acids (PFSAs) from precursor compounds (such as fluorotelomer alcohols) under laboratory conditions. Our study suggests that PFSAs and PFCAs themselves can undergo photodegradation in the environment.     

Debrominated,hydroxylated and methoxylated metabolism in maize (Zea mays L.) exposed to lesser polybrominated diphenyl ethers (PBDEs)

A hydroponic experiment was conducted to investigate the debrominated, hydroxylated and methoxylated metabolism of polybrominated diphenyl ethers (PBDEs, BDE-15, -28 and -47) in maize. A total of six debrominated metabolites (de-PBDEs), seven hydroxylated PBDEs (OH-PBDEs, including two unidentified OH-di-PBDEs and one unidentified OH-tri-PBDE) and four methoxylated PBDEs (MeO-PBDEs) were determined in the exposed plants. The metabolic products were detected in maize only after 12 h of exposure to the PBDEs. However, the concentration of each type of the metabolites (de-PBDEs, OH-PBDEs or MeO-PBDEs) decreased at the later exposure time, possibly due to further metabolism. The removal of a bromine atom or the introduction of a hydroxyl/methoxy group was easier at the ortho-positions on the biphenyl structure than at the para-positions. Concentration ratios of the total debrominated, hydroxylated or methoxylated metabolites to the parent congener (BDE-28 or -47) generally followed the order of leaves > stems ≫ roots, and MeO-PBDEs > de-PBDEs ≫ OH-PBDEs. These results suggest that metabolism occurred preferentially in leaves and stems than in roots. Less transformation and shorter elimination half-life of OH-PBDEs would contribute to the lower concentrations of OH-PBDEs than of de-PBDEs or MeO-PBDEs in maize.     

Anthropogenic and natural levels of arsenic in PM10 in Central and Northern Chile

A few copper and gold smelters in Chile are behind a large fraction of global arsenic emissions, raising concerns for increased concentrations of arsenic in PM10 in Central and Northern Chile. This concern is amplified by the fact that Northern Chile soils and rivers in general are characterized by a high arsenic content. A monitoring and modeling study has been performed to quantify the regional impact of the smelter emissions. Measured atmospheric arsenic concentrations from 2.4 to 30.7 ng m⁻³ were found at seven rural stations, located tens to hundreds of kilometers away from the nearest smelter. Analyses of topsoil and subsoil samples taken from PM10 monitoring stations revealed levels up to 291 mg kg⁻¹, the highest values found in the northern Atacama desert in Chile. An absolute principal component analysis of selected trace elements in PM10 shows that the regional impact of anthropogenic smelter emissions on airborne arsenic concentrations is more important than the effect of soil dust resuspension. The dominance of the smelter emissions is larger in Central Chile than in the northern parts. The impact of resuspended soil dust on airborne arsenic levels in rural areas was estimated not to exceed 5 ng m⁻³. The model calculations support the dominant role of anthropogenic emissions and give spatial and temporal variations in atmospheric concentrations consistent with the monitored levels at five of the seven stations. At two of the northernmost stations indications were found of unidentified sources other than the smelters and the resuspended soil dust, contributing to about 5 ng m⁻³ of total arsenic levels. The study confirms that a strong control or elimination of arsenic emissions from the smelters would lead to arsenic in PM10 levels in Northern and Central Chile comparable to non-polluted areas in other countries.     

Anhydrosugar and sugar alcohol organic markers associated with carboxylic acids in particulate matter from incense burning

Aerosol from the burning two types of sandalwood-based incense, Hsing Shan and Lao Shan, was analyzed to characterize the chemical profile of total particulate matter emitted. The total particulate matter (PM) mass emission factors were 46.3 ± 2.68 mg g^?1 of Hsing Shan incense and 43.7 ± 1.08 mg g^?1 of Lao Shan incense. Chemical analysis of emissions from the two types of incense revealed that of the 25 components in four groups characterized, anhydrosugars formed the major group, at 46.7–52.2% w/w of the identified particulate and 1078.3–1169.8 μg g^?1 of incense, followed by inorganic salts at 30.4–31.8% w/w of identified particulate and 681.6–734.0 μg g^?1 of incense, carboxylic acids at 12.0–17.1% w/w of the identified particulate and 268.6–392.8 μg g^?1 of incense, and sugar alcohols at 4.44–5.38% w/w of the identified particulate and 102.3–120.6 μg g^?1 of incense. More anhydrosugars and sugar alcohols were emitted from Lao Shan incense than from Hsing Shan incense whereas more carboxylic acids and organic salts were emitted from Hsing Shan than from Lao Shan. These differences were due to structural and functional differences in the young sandalwood used to make Hsing Shan and the aged sandalwood used to make Lao Shan. The anhydrosugar levoglucosan, used as a marker of biomass burning, was always the most abundant species in emitted PM for both incenses (Lao Shan 21.7 mg g^?1 of PM and Hsing Shan 18.7 mg g^?1). K⁺ and Cl^? were the second most abundant components (K⁺ and Cl^? were summed), accounting for 10.6 mg g^?1 of Hsing Shan PM and 9.85 mg g^?1 of Lao Shan PM. The most abundant carboxylic acids in the emissions were formic, acetic, succinic, glutaric and phthalic acid. The latter is a fragrance ingredient and a potential health hazard and was twice as prevalent in Lao Shan emissions. Xylitol was the most prevalent of the sugar alcohols at 35.7–36.6% w/w of total identified sugar alcohols. These abundant species are potential markers for incense burning. K⁺, levoglucosan, mannosan and xylitol are already reported in discriminator ratios for wood burning and it is proposed here that these can and should also apply to incense burning. The calculated discriminator ratios for two types of incense burning reported here are 0.229–0.288 for K/Levo, 12.5–13.5 for Levo/Manno, and 21.5–23.7 for the novel discriminator ratio Levo/Xylitol.