伊犁地区部分河流的水质标识指数

通过2004 - 2006年对伊犁地区的特克斯河、伊犁河的水质调查及水质标识指数和综合指数(WQI)的计算发现,DO、COD、TN、NH3-N、TP 5项指标在10个断面的空间分布上伊宁市区的2个断面水质最差,在时间上属8月最差,水质主要污染指标的排序依次为TP、TN、COD和NH3-N.     

Uptake of some selected aquatic pollutants in semipermeable membrane devices (SPMDs) and the polar organic chemical integrative sampler (POCIS)

The uptake characteristics of semipermeable membrane devices (SPMDs) and polar organic chemical integrative samplers (POCISs) were examined for mono, di and tributyltin, triphenyltin, pyrene, benzo[a]pyrene, 4-tert-butylphenol, 4-n-nonylphenol, PCBs 77 and 153, PBDE 47, lindane, triclosan and DDT. Exposure in a flow through system continued for 28 days with samplers removed every 7 days in order to study the relevant uptake kinetics. Uptake remained linear for POCISs with sampling rates (Rs) of up to 0.2 L d(-1). For SPMDs uptake varied from linear to approaching equilibrium with Rs values of up to 14 L d(-1). 7 out of 9 results for SPMDs could be explained by an empirical model (nonylphenol and lindane were exceptions). None of the four organo-tin compounds studied were detected in POCISs and only tributyltin was accumulated significantly by SPMDs. The establishment of these sampling rates allows the calculation of time weighted water concentrations for several important contaminants. Using presented methods, sampling rates and exposure conditions, theoretical detection limits for selected compounds by SPMDs were between 11-68 pg L(-1), which is well below the environment quality standard proposed for those compounds that are included in the European Water Framework Directive.     

Biological monitoring of a pulp and paper mill wastewater

The physico-chemical testing required under the E.P.A. licence enables one to gauge the chemical effects of the APM wastewater on the Latrobe River, but it tells us nothing about likely effects on the aquatic biota. The APM bio-monitoring programme was instigated to provide evidence of any effects of wastewater discharges on the rivers biota. To date the programme has shown no adverse impact downstream. The laboratory bioassays on fish and algae have recently given way to the river fauna surveys as the regular monitor of wastewater quality. It is intended to continue with regular river surveys using the river's residents as indicators of water quality and future surveys will investigate reasons for the presently obscure variation in macro-invertebrate populations.     

Detecting micronuclei frequency in some aquatic organisms for monitoring pollution of Izmir Bay (Western Turkey)

Micronuclei tests is a system of mutagenicity testing used for determining the pollution and chemicals causing changes in DNA fragments such as micronuclei in the cytoplasm of interphase cells. Damage caused on the DNA by genotoxic pollutants is the first consequence occurring in the aquatic organisms. Thus, it was attempted to determine whether pollution affected the erythrocytes and gills of fish Gobius niger and haemolymph and gills of mussels Mytilus galloprovincialis living in Izmir Bay at the level of DNA by the means of micronuclei (MN) test. Organisms used in the MN test were collected from seven locations (Alsancak, Alaybey Shipyard, Karsiyaka, Bostanli, Göztepe, Konak and Pasaport) which are known as the most polluted part of inner Bay of Izmir (Western Coast of Turkey). According to the results of the present study, frequency of MN was found at high level in Alaybey Shipyard and Pasaport where wastes from existing dockyard contributed to high level of pollution. In conclusion, this study indicates that the micronuclei test gives sensitive results in monitoring the pollution, especially the pollution of harbor, and thus it might be used as standard method in regular monitoring of pollution of coastal ecosystem.     

Biological monitoring of heavy metal contaminations using owls

Iron, manganese, copper, lead and cadmium were measured in the livers, muscles, kidneys and bones of Eurasian Eagle Owls (Bubo bubo), Brown Hawk Owls (Nixos scutulata) and Collared Scops Owls (Otus lempiji) from Korea. Iron concentrations by tissue within species did not differ, but there were significant differences among tissues across all species. Manganese and copper concentrations in muscles, kidneys and bones, but not livers, differed among species and also differed among tissues in the three owl species. We suggest that manganese and copper concentrations from this study were far below the level associated with their toxicity. Lead concentrations significantly differed among all species for livers and bones, and among tissues for each species. Cadmium concentrations were significantly different among species for all tissues and among tissues in Eurasian Eagle Owls and Collared Scops Owls. For most samples, lead concentrations in livers and bones, and cadmium in livers and kidneys, were within the background levels for wild birds. For some Eurasian Eagle Owls and Collared Scops Owls, lead concentrations were at an acute exposure level, whilst lead concentrations were at a chronic exposure level in Brown Hawk Owls. Cadmium concentrations were at a chronic exposure level in all three owl species. Acute and chronic poisoning was significantly correlated between indicator tissues. We suggest that lead and cadmium contamination in Eurasian Eagle Owls may reflect a Korean source, Brown Hawk Owls may reflect Korean and wintering sites, and Collared Scops Owls may reflect breeding and/or wintering sites.     

Polar organic chemical integrative sampler (POCIS): application for monitoring organic micropollutants in wastewater effluent and surface water

In this paper, we discuss the advantages and drawbacks of POCIS (Polar Organic Chemical Integrative Sampler) for the evaluation of river water quality downstream of wastewater treatment plants. POCIS proved well adapted to sampling alkylphenols and several pharmaceuticals. Concentration factors and the decrease in limits of quantification, compared to grab water sample analyses, were significant except for hormones, β-blockers and bronchodilators. Promising preliminary results obtained in situ on deuterated atenolol used as a performance reference compound need to be confirmed in-lab. This work confirms that POCIS is a valuable tool for monitoring hydrophilic organic molecules in river and wastewaters.     

Sample size for monitoring of toxic chemical sites

The problem of determining sample size for environmental monitoring and assessment is considered. Hypothesis testing is discussed in general terms and in terms of monitoring toxic chemical sites. Competing risks of misclassification of sites are examined within the framework of statistics. Alpha and beta, the probability of making Type I and Type II errors, respectively, are illustrated in the context of environmental monitoring.Sample size formulas and tables are provided for comparing a mean to a standard mean, comparing two means, comparing a proportion to a standard proportion, and comparing two proportions. The formulas and tables consider the size of differences to be detected as well as the probability of Type I and Type II errors.Although the research described in this article has been funded wholly or in part by the United States Environmental Protection Agency through Cooperative Agreement No. CR 810550 to the University of Nevada, Las Vegas, it has not been subjected to the Agency review and therefore does not necessarily reflect the views of the Agency and no official endorsement should be inferred.     

Coastal dune systems and disturbance factors: monitoring and analysis in central Italy

This study describes the conservation status of dune systems in relation to disturbance factors in the coastal stretch of the Viterbo province, Latium Region, Italy. Particular emphasis was given to the bioindication value of plant communities and their sequence. Each plant community was considered as a "habitat" in accordance with Annex I of the Directive 92/43/EU. Stress factors, such as sand dynamic and erosion, and anthropogenic pressures, such as trampling and bathing settlements, influence the sequence of habitats and weaken the system of relations that makes these coenoses to occur in extreme conditions. The choice to carry out surveys along wide transects, recording different data, allowed to explore the use of habitats as bioindicators. Comparing sites characterized by the same extension in a homogeneous area, it was possible to expand the use of canonical correspondence analysis (CCA) as a tool to correlate habitat composition and disturbance factors. The application of CCA showed a high correlation of degradation and habitat loss with coastal erosion, trampling and presence of waste. Furthermore, floristic surveys allowed the application of different biodiversity indices to quantify species richness of sampled areas. The conservation status of the sites investigated was found to be diverse, from the total disappearance of the mobile dune habitats to their complete sequence. The proposed methodology has been useful to fulfill the objective of the work and is applicable to other case studies in the Mediterranean.     

Combining Logistic Models with Multivariate Methods for the Rapid Biological Assessment of Rivers Using Macroinvertebrates

This work represents an attempt to define a simple method to classify the relative degree of disturbance of sites in lotic systems on the basis of comparison of their faunistic composition with reference sites. Two ecotypes were selected in northern Portugal where benthic invertebrates were sampled in reaches with different levels of contamination. As a first stage, previous Geographic Information System information was used to define reference sites in each ecotype. Afterwards, multivariate techniques and non linear estimation models were combined to assess biological quality. This method allowed us to quantify sites according to increasing levels of contamination, after the probabilities of occurrence of taxa along a gradient of contamination taking into account the reference condition. The results suggest that this method is sensitive to organic pollution, easy to interpret, namely the species tolerance, and could be a good framework to establish regional rankings depending on the ecological impact of river sites.     

Organochlorine Pesticides and PCBs in Wild Boars from Calabria (Italy)

At present, there are no specific studies on the evaluation of environmental toxicological risks in Calabria (south of Italy) and on the presence of contaminants in the fauna of this region. The aim of the present research was to investigate the levels of contamination by OC pesticides and PCBs in some organs and tissues of wild boars (utilized as 'biological indicator') from various areas of Calabria. Quantitative determinations of organochlorines were carried out using GC-ECD and confirmed with GC-MS in 154 samples from wild boars (heart, liver, lung, kidney, muscle tissue and spleen) during the hunting season from 2000 to 2002. The results indicate the low residual levels of DDE in 8 samples and DDT in 4 samples and PCBs residues (Aroclor 1232) below the detection limits were found. Therefore, these results show that the Calabria region is not at contamination risk from organochlorines and moreover is free from health problems for the consumer of boar meat.     

Natural and anthropogenic contamination of the Fratta-Gorzone river (Veneto, Italy)

Stream-bed sediment samples were collected in 2001 and 2004 along the Fratta-Gorzone River (Italy) to assess the level of heavy metal contamination. The river stretch most affected by discharges of tannery effluent showed total and pseudo-total Cr levels (up to 2,860 mg/kg) that greatly exceed national and international chemical sediment quality standards. The most contaminated section of the river bed is located downstream of the main industrial discharge. However, a large fraction of the Cr present in the sediment appears to be of lithogenic origin. At most sites, more than 50% of Cr is not soluble in aqua-regia and thus unlikely to be very mobile or easily bio-available. A negligible risk to the benthic community can be inferred for Pb, Zn, Cd, Cu and Ni. This work highlights the limitation of using existing chemical sediment quality standards alone for risk assessment. The collection and analysis of suspended solids, the determination of river discharge and of dissolved Cr at 10 field stations allowed to estimate the particulate and dissolved Cr load and to locate the river stretch that was the likely source of contaminated sediment. The pumping of dilution water from the Adige River into the Fratta-Gorzone River did not produce the expected contaminant dilution effect due to re-suspension of contaminated solid particles and the release of Cr in solution.     

Metal Contamination in Urban Soils of Coastal Tuscany (Italy)

Urban soils are often contaminated by metals deriving from human activities. Urban polluted soils can affect human health through direct physical contact or through the food chain. The behaviour of metals is affected by chemical and physical soil properties. Heavy metal concentration was determined in some soils of three medium sized towns of coastal Tuscany, Central Italy. Soil samples were collected in roadsides, urban agricultural soils (allotments), playgrounds and public parks. The analysis included total metal content (Pb, Cu, Zn, Ni, Cd), and sequential extraction. Lead reached the highest levels in the soils and was higher near roads. In urban agricultural soils and in allotments Cu was present in noticeable quantities (300 mg kg⁻¹). The presence of Cu in urban soils seems to be typical of soils used for a long period as agricultural land, especially vineyards in the area covered by this study. Sequential extraction was performed to evaluate the mobility of the metals and to better understand the impact of the anthropogenic activity on urban sites. In the present study principal components analysis (PCA) is employed to describe the characteristics of urban soils.     

Biological monitoring of atmospheric trace metal deposition in North-Eastern Nigeria

The epiphytic moss Polytrichum juniperinum and the tree bark of Azardirachta indica were used to determine the atmospheric Cd, Cu, Pb, Mn, Fe, Ni and Zn levels in the North-East region of Nigeria. A good correlation exists between levels in the moss and the tree barks. The Pb, Zn and Fe levels in both sample types were higher than other metals in most sites. There was no significant difference in the levels of Cd, Cu, Ni and Mn recorded for inhabited and forest sites. The area derives its atmospheric metal contamination from vehicular, urban, industrial and agricultural sources.     

Environmental and biological monitoring of methyl ethyl ketone (MEK)

This study was conducted to evaluate the usefulness of various biological parameters for monitoring of workers exposed to methyl ethyl ketone (MEK). Fifty male workers from a large magnetic videotape factory participated in this study. Personal air samples were collected using 3M organic vapor monitors and analysed for MEK by gas chromatography with flame ionisation detector (FID). 10 mL of urine; blood (1 mL) and exhaled air were also collected at the end of an 8-hour workshift. The headspace GC method was applied for measurement of urinary and blood MEK. MEK in expired air was analysed directly by using a GC/FID.The correlation coefficients (r) between environmental MEK and all other biological parameters measured show significant positive relationships. The r for environmental MEK and urine MEK was 0.84; for blood 0.73 and for breath 0.64. The correlation coefficients between blood and urine was 0.72; blood and breath was 0.88 and urine and breath 0.60. These findings suggest that measurements of unmetabolised MEK in blood, exhaled air and urine can be used for biological monitoring of MEK exposure. Nevertheless, laboratory methodological assessment is in favour of measuring urinary MEK as it is non-invasive and does not have to be analysed immediately after collection.     

Autochthonous clams monitoring of Ganzirri Lake (Sicily)

Two autochthonous clams, Venerupis aurea laeta and Cerastoderma edule/glaucum, collected for a period of 1 year, from May 2007 to January 2008, were studied in the Cape Peloro lagoon. On the samples, it was evaluated the presence of pathogenic microorganisms and proteins, lipids and yield edible part were determined. It was evaluated the concentration of mineral elements (Cd, Cu, Mn, Se, Pb, Zn) and organic contaminants (∑DDT and PCBs). Salmonella is never present in any sample. Total and faecal coliform values have always been under law limits for alive bivalves mussels production and sale. Zn, Cu, Cd and Pb levels were found in clams where they are slightly lower too. Both species do not show significant changes for Mn and Se. DDT and PCBs traces were discovered in Ganzirri Lake’ samples, but in all observed cases, they were below law limits. As a result of all these observations, it is clear that, in recent years, the bivalve’s use of Ganzirri Lake does not denote toxicological risk to human health.     

Assessing workplace chemical exposures: the role of exposure monitoring

Occupational exposure is the condition of being subjected through employment to a chemical, physical, or biological agent, or to a specific process, practice, behavior, or organization of work. Exposure to a chemical agent is typically the contact of that agent with the outer boundary of a subject, such as the respiratory system, skin, or digestive system. In occupational hygiene we are most concerned with exposure through the respiratory system, although, increasingly we are concerned with the results of dermal exposures, including those exposures to the skin that can be transferred to the mouth and digestive system. This presentation will detail methods available for assessing personal exposures to chemicals through monitoring. The results from monitoring can then be compared to established guidelines and regulations, although this is not the only rationale for making measurements. These monitoring methods are currently used around the world to establish the benchmark hazard from which risk to the worker can be predicted. The presentation will describe the general techniques for assessing exposures to the respiratory system from chemical gases and vapors, chemical dusts, and exposures to the skin from bulk chemicals or chemical contamination of surfaces. For respiratory exposures, direct-reading instruments are available for spot measurements, and for monitoring short-term fluctuations in concentration. However, most standards and regulations are based on time-integrated (time-weighted average) exposures, requiring longer-term integrative methods. Therefore, the specific focus of this review will be the methods available for full work-shift sampling. For gases and vapors this will include taking whole-air samples in canisters or polymer bags, or concentration of chemicals by absorption in liquids or adsorption on solid sorbents, with subsequent chemical analysis. Chemical concentration can take place by pumping air through the sorbing media, or by allowing molecules to diffuse to the sorbent surface. Transfer of the collected chemicals to the analytical instrumentation can be accomplished using solvent displacement and injection, or through the application of heat to bring the collected molecules back into the vapor phase. For particles, the particle size is important as this determines the site of deposition in the lungs, and so time-integrated sampling on filters using various types of size-selective samplers is preferred. Finally, some techniques that have been used to assess the potential for chemical contamination of the skin are presented. Biomonitoring is another tool that can be used to assess exposure, and the results are more relevant to dosimetric considerations than exposure. Biomonitoring is a complex subject worthy of a separate review, and will be considered only briefly here.     

Biological effects monitoring of the North Sea employing fish embryological data

Using the reproductive capacity of fish appears to be a suitable approach for risk assessment in the aquatic environment since fish are a typical representative thereof and in addition they are of considerable societal value. Generally the early embryonic stages are considered to be one of the most sensitive parts of a fish's life cycle. A method has been developed to use the state of health of live, naturally spawned fish embryos from plankton samples for biological effects monitoring. During the years 1985–1987 in the southern North Sea and in 1991–1992 in the whole of the North Sea fish eggs were sampled from surface waters and examined for developmental abnormalities. Elevated embryo malformation rates were detected in the plume of the major rivers Elbe and Rhine as well as along the eastern coast of England. Occurring malformations are thought to be pollution-related and may be used to define areas of environmental deterioration. The method is discussed in view of its suitability for biological effects monitoring using malformations in fish embryos as biomarkers.     

Occurrence of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) in Lake Maggiore (Italy and Switzerland)

Samples of air (gas and particulate phases), bulk deposition, aquatic settling material and sediments were collected in Lake Maggiore (LM) in order to determine their content of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Air (gas and particulate phases) concentrations were 0.5 pg m(-3), 80 pg m(-3), 13 pg m(-3) and 106 pg m(-3) for SigmaPCDD/Fs, SigmaPCBs, Sigma dioxin-like PCBs (DL-PCBs) and SigmaPBDEs, respectively. Deposition fluxes ranged from 0.7 ng m(-2) d(-1) for SigmaPCDD/Fs to 32 ng m(-2) d(-1) for SigmaPCBs. Aquatic settling material presented concentrations of 0.4 ng g(-1) dry weight (dw) for SigmaPCDD/Fs, 13 ng g(-1) dw for SigmaPCB, 3.4 ng g(-1) dw for SigmaDL-PCBs and 5.7 ng g(-1) dw for SigmaPBDEs. Mean sediment concentrations were 0.4 ng g(-1) dw for SigmaPCDD/Fs, 11 ng g(-1) dw for SigmaPCB, 3 ng g(-1) dw for SigmaDL-PCBs and 5.1 ng g(-1) dw for SigmaPBDEs. Similar PCDD/F and DL-PCB congener patterns in all the environmental compartments of LM point to an important, if not dominant, contribution of atmospheric deposition as source of these pollutants into LM. In contrast, PBDE congener distribution was not similar in the different environmental compartments. BDE 47 dominated air and settling material, while BDE 209 was the predominant congener in the bulk atmospheric deposition. Moreover, sediments showed two distinct PBDE congener profiles. Lower PBDE concentrated sediments were dominated by congeners 47 and 99, while BDE 209 dominated in higher PBDE concentrated samples. This suggests the influence of local sources as well as atmospheric input of PBDEs into LM.     

Population monitoring for genetic damage induced by environmental physical and chemical agents

The short-term tests performed in vitro on different systems, from phage to human cells, or in vivo, on laboratory animals, allow only a qualitative estimate of the action of mutagenic agents, and the extrapolation of such experimental results to man may encounter many difficulties.Direct biomonitoring of populations exposed to chemicals could represent a more realistic approach for an evaluation of the hazards to man. Certain methods are still under development. Nevertheless, other ones can already by used routinely, e.g. the cytogenetic observations on peripheral blood lymphocytes and the Ames test for mutagenic substances in urine, and can provide useful suggestions how to set threshold limits for chemical substances encountered in the working environment.