Inorganic pigments made from the recycling of coal mine drainage treatment sludge

Continuous industrial development increases energy consumption and, consequently, the consumption of fossil fuels. Coal mineral has been used in Brazil as a solid fuel for thermoelectric generators for several years. However, coal exploitation affects the environment intensely, mainly because Brazilian coal contains excess ash and pyrite (iron disulfide). According to the local coal industry syndicate, the average annual coal run per mine is 6 million ton/year; 3.5 million ton/year are rejected and disposed of in landfills. Besides pyrite, Brazilian coal contains Mn, Fe, Cu, Pb, Zn, Ge, Se, and Co. Additionally, the water used for coal beneficiation causes pyrite oxidation, forming an acid mine drainage (AMD). This drainage solubilizes the metals, transporting them into the environment, making treatment a requirement. This work deals with the use of sedimented residue from treated coal mine drainage sludge to obtain inorganic pigments that could be used in the ceramic industry. The residue was dried, ground and calcined ( approximately 1250 degrees C). The calcined pigment was then micronized (D(50) approximately 2mum). Chemical (XRF), thermal (DTA/TG), particle size (laser), and mineralogical (XRD) analyses were carried out on the residue. After calcination and micronization, mineralogical analyses (XRD) were used to determine the pigment structure at 1250 degrees C. Finally, the pigments were mixed with transparent glaze and fired in a laboratory roller kiln (1130 degrees C, 5min). The results were promising, showing that brown colors can be obtained with pigments made by residues.     

Evaluation of leachates from coal refuse blended with fly ash at different rates

There is great interest in returning coal combustion products to mining sites for beneficial reuse as liming agents. A column study examined the effects of blending two coal fly ashes with an acid-forming coal refuse (4% pyritic S). Both fly ashes were net alkaline, but had relatively low neutralizing capacities. One ash with moderate alkalinity (CRF) was bulk blended with coal refuse at 0, 20, and 33% (w/w), while another lower alkalinity ash (WVF) was blended at 0, 5, 10, 20, and 33% (w/w). The columns were leached (unsaturated) weekly with 2.5 cm of simulated precipitation for >150 wk. Where high amounts of ash alkalinity (>20% w/w) were mixed with the coal refuse, pyrite oxidation was controlled and leachate pH was >7.0 with low metal levels throughout the study. At lower rates of alkalinity loading, trace metals were sequentially released from the WVF ash as the 5, 10, and 20% treatments acidified due to pyrite oxidation. Lechate metals increased in proportion to the total amounts applied in the ash. In this strongly acidic environment, metals such as Mn, Fe, and Cu were dissolved and leached from the ash matrix in large quantities. If ash is to be beneficially reused in the reclamation of acid-producing coal refuse, the alkalinity and potential acidity of the materials must be balanced through the appropriate addition of lime or other alkaline materials to the blend. Highly potentially acidic refuse material, such as that used here, may not be suitable for ash/refuse codisposal scenarios.     

Recent progress in coal bioprocessing research in Europe

European work on the application of biotechnology to processing various coals is reviewed and set within a wider context. Both U.S. and European work are discussed. In connection with work on microbial desulphurisation, European effort, particularly that centred on Delft University in the Netherlands, has concentrated on looking towards practical plant designs based on kinetic reaction data obtained in the laboratory. The question of desulphurisation looks rather different from a European (and world) perspective, compared with the situation in the U.S. There are, for example, several countries with high sulphur, low rank coals, where a higher proportion of the sulphur is present in organic form.While the work on pyrite removal has been well documented and has been replicated by different workers, that on organic sulphur removal is at a much earlier stage. In the U.K., work is going on to enhance the physical separation processes currently used in coal cleaning, using micro-organisms to alter the surface properties of various particles during flotation. This approach has the possibility of relatively short-term application and low capital costSome fundamental studies looking for organisms to attack and degrade the coal molecule, particularly in the F.R.G., have been based on bituminous coal. This contrasts with U.S. work which has met with some success with lignites and weathered lignite in the form of leonardite.The use of biotechnology in connection with coal must be looked at principally as a potential long-term development. The inherent problems associated with the nature of coal must be recognised but research work is already demonstrating possibilities that even 5 or 10 years ago would have been discounted. With advances in analytical techniques, one of the first benefits to be gained may well be a better knowledge and understanding of coal structure from looking at its degradation products.     

Are Scientists Right and Non-Scientists Wrong? Reflections on Discussions of GM

The aim of this article is to further our understanding of the “GM is unnatural” view, and of the critical response to it. While many people have been reported to hold the view that GM is unnatural, many policy-makers and their advisors have suggested that the view must be ignored or rejected, and that there are scientific reasons for doing so. Three “typical” examples of ways in which the “GM is unnatural” view has been treated by UK policy-makers and their advisors are explored. These are the Government’s position (DEFRA Report), the account of the Nuffield Council on Bioethics, and the position of Nigel Halford, a scientist with an advisory role to the Government. I show that their accounts fail to mount a convincing critique. Then, I draw on an empirical research project held during  2003–2004 at the University of Newcastle-upon-Tyne in the north east of England. Scientists met with non-scientists in a range of facilitated one-to-one conversations (“exchanges”) on various environmental issues, one of which was on GM. Our findings show that some scientists who rejected the “GM is unnatural” view struggled to do so consistently. Their struggle is interpreted in terms of a conflict between a so-called “scientific” worldview, and a different worldview that underlies the concerns of those who held the “GM is unnatural” view. This worldview is explored further by an examination of their concerns. What distinguishes this worldview from the “scientific” worldview is that the instrumentalization of the nonhuman world is questioned to a larger extent. I conclude that, because the underlying concerns of those who held the “GM is unnatural” view were not with GM as such, yet with a worldview that was considered to be problematic, and of which many GM applications were held to be expressions, policy-makers and their advisors should reflect on the critical worldview of those who claim that GM is unnatural if they want to engage seriously with their concerns.     

Experimental oxidative dissolution of sphalerite in the Aznalcollar sludge and other pyritic matrices

After the collapse on 25 Apr. 1998 of the Aznalcóllar mine tailings dike in southwestern Spain, 45 km2 of the Guadiamar valley were covered by a pyritic sludge containing up to 2% sphalerite (ZnS). Later, the sludge was mechanically removed and calcium carbonate was plowed into the soil to immobilize heavy metals. By June 2001 more than 60% of the sulfides in the residual sludge had oxidized and soil Zn contents reached locally phytotoxic levels. Therefore, the oxidative dissolution of sphalerite in the sludge and other pyritic samples was examined. Flow-through oxidation experiments showed that: (i) about 5 and 17% of the sludge Fe and Zn were in soluble form, respectively, because the sludge sample had been partly oxidized in the field; (ii) the oxidation rates of the residual pyrite and sphalerite were similar; (iii) the overall sulfide oxidation rate was relatively unaffected by the addition of calcite; and (iv) poorly crystalline Fe (hydr)oxides containing Zn in occluded form and Zn (hydroxi)carbonates were formed in the presence of calcite. The rate of oxidation of reference sphalerite greatly increased when it was incorporated in the sludge or in a reference pyrite matrix. This enhancement was due to galvanic interaction because pyrite oxidation was depressed in the presence of sphalerite. Oxidation by Fe3+ ions was less important because the oxidation rates of native sphalerite were not greater at low than at high pH. The fast oxidation rate of sphalerite in the Aznalcóllar sludge indicates a need for quick adoption of remediation measures in similar accidents elsewhere. The use of calcite amendments has little influence on the oxidation rate but does result in the accumulation of Zn in relatively insoluble forms.     

A method of comparing the performance of air classifiers

An experimental and theoretical comparison is made between a “zig-zag” air classifier and a straight-duct type. Equations are presented, based on a model already published, for the effective diffusivity of spherical particles in a turbulent air stream. The diffusivity reflects the tendency of particle species to diffuse the “wrong” way, that is to be lost. The lower the value of the effective diffusivity, the more efficient is the classifier. It is shown that the effective diffusivities are lower in the “zig-zag” classifier than in the straight-duct type especially for the “light” species. It is also shown that the effective diffusivities of “light” and “heavy” species are similar in value, indicating the mid-point as the optimum feed location. It is also shown that, at high values of the air/solids ratio, the effective diffusivities can be easily estimated by using mixtures of regular particles, or simply by feeding a single species of spherical particles. The effective diffusivities were found to be independent of the number of stages in the “zig-zag” classifier, and took values similar to freestream diffusion values.The method described represents a very simple test which could be applied to proposed designs of air classifier to enable a comparison of effectiveness to be made.     

Spatiotemporal evolution of soil pH and zinc after the Aznalcollar mine spill

The residual pollution after the Aznalcóllar (southwestern Spain) pyrite mine spill is still a threat due to the continuing oxidation of sulfuric minerals. The objective of this paper was to analyze the combined effect of pyrite oxidation, sugar beet foam applications, and meteorological conditions on the spatiotemporal evolution of the pH and EDTA-extractable Zn concentration, using non co-located data from 11 sampling dates between June 1999 and March 2002. Median pH values ranged from 4.4 at the beginning of the monitoring period to 7.6 at the end, although values near 2.5 were observed throughout the entire period, despite of two sugar beet foam (SBF) applications. Zinc distributions were positively skewed and median concentrations ranged from 17 to 94 mg kg(-1). The inverse relationship between pH and Zn became weaker toward the end of the monitoring period as a consequence of the precipitation and posterior dissolution of newly formed minerals from the reaction products of the pyrite oxidation. Normal score maps showed that after the SBF applications only 0.5% of the monitored area was below the pH = 4 threshold, while on other dates up to one-third of the area remained below this value. The better performance of the second SBF application could be explained in terms of pyrite oxidation pathways and environmental conditions. From this analysis, with data obtained under uncontrolled field conditions, it is concluded that SBF should be applied before or during the wet and cold season to alleviate acidification, caused by the oxidation of pyrite or other sulfuric minerals.     

The “Short Cut” Approach for the Reality of Enhanced Groundwater Contamination

Based on the reality of (a) soil heterogeneity in the vadose zone, (b) enhanced desorption from soil and solubility in water of water insoluble contaminants in the presence of surfactants, and (c) wetting/drying cycles of groundwater recharge (a major cause of fractures formation), a coherent “short-cut” conceptual approach is advanced to account for enhanced groundwater contamination. This is an attempt to close the gap between theory, lab simulations and conventional modelling-based predictions, and observed higher concentrations and more rapid arrival times of contaminants reaching groundwater. Recent data concerning chloride ion and non-ionic surfactants concentrations in aquifers and groundwater wells, combined with previous results concerning the concentrations of tritium, chlorides, metals, organic hydrocarbons and surfactants in the unsaturated and saturated zones of Israel's aquifers, are accounted for in terms of the “short-cut” approach. The contradiction between predictions of groundwater contamination made with conventional, deterministic, homogeneous models and the actual observed behavior of contaminants in soils and aquifers is thus explaind. The “short cut” approach should not be perceived as a better type of model to guide modelling. Rather, it is a proposal for a conceptual change from the realistically invalid, but commonly accepted, conventional “buffer-protective soil/long-term groundwater contamination” to the “short cut” conceptual model to explain the enhanced groundwater contamination actually observed. Although the validity of the proposed approach is strongly supported by the data here presented for the case of Israel (serving as an illustrative case study), selected results and conclusions drawn from studies conducted worldwide suggest its general applicability and usefulness. A major conclusion evolved from the “short-cut” conceptual model is that contemporary groundwater management policies, based on the current perception of groundwater contamination processes and their modelling, may result in an irreversible detrimental effect on the environmental situation in the long run. In any case, prevention, rather than correction/remediation, is strongly recommended as the strategy of choice for rational long-term management of groundwater resources.     

Removal and recycling of copper from aqueous solutions using treated Indian barks

Removal of copper from aqueous solutions containing 100–1000 ppm, using different Indian bark species, was performed on laboratory scale. The percentage removal of metal ions depends on the solution pH, bark species and time. The efficiency of copper removal by the used raw barks increases with a rise of solution pH and reaches a maximum of about 65–78% around pH 4–5. However, the decontaminated aqueous solutions were colored due to the dissolution of soluble organic compounds contained in the raw bark. This increases the biological and chemical oxygen demand (BOD and COD) of the solutions as well as the total organic carbon content (TOC). For this reason, raw bark should be treated either by chemical or biological means. Such treatment will allow the extraction of the soluble organic compounds and increase the chelating capacity and efficiency of the treated bark. Depending on the pH value, the chelating efficiency of treated barks is about 1.2–2.2 times that of the raw ones. Moreover, the retention capacity of the Indian treated bark varies from about 42–51 mg/g of dry bark. It is equal to or higher than that of common European species. About 1.8 mols of H₃O⁺ are released, by the treated barks, for every mol of chelated copper ions. Moreover, scanning electron microscopy (SEM) observations show uniform distribution of metal ions throughout the copper saturated bark. Infra red (IR) spectra suggest that the copper ions are chelated to hydroxyl and/or carboxyl functional groups of organic compounds contained in the treated bark. It seems that the interaction of the copper ions with the bark follows a cation exchange mechanism. This hypothesis is supported by elution experiments that allow recovery of about 99% of the contained copper. The retention capacity of the treated bark is almost constant after five cycles of chelation–elution, suggesting that the ‘life time cycle' is sufficiently long for continuous industrial application. The spent copper loaded barks can either be incinerated or pyrolysed. It generates solids containing either ≈80% of CuO or ≈14% of Cu°, respectively. Such materials can be used either in the secondary or primary copper production, thus offering a friendly environmental solution of effluents' treatment. The suggested process can be used as an alternative to the classical technologies for effluent decontamination. It is also efficient for polishing effluents treated by other methods.     

A method for quick assessment of CO2 storage capacity in closed and semi-closed saline formations

Saline aquifers of high permeability bounded by overlying/underlying seals may be surrounded laterally by low-permeability zones, possibly caused by natural heterogeneity and/or faulting. Carbon dioxide (CO₂) injection into and storage in such “closed” systems with impervious seals, or “semi-closed” systems with non-ideal (low permeability) seals, is different from that in “open” systems, from which the displaced brine can easily escape laterally. In closed or semi-closed systems, the pressure buildup caused by continuous industrial-scale CO₂ injection may have a limiting effect on CO₂ storage capacity, because geomechanical damage caused by overpressure needs to be avoided. In this research, a simple analytical method was developed for the quick assessment of the CO₂ storage capacity in such closed and semi-closed systems. This quick-assessment method is based on the fact that native brine (of an equivalent volume) displaced by the cumulative injected CO₂ occupies additional pore volume within the storage formation and the seals, provided by pore and brine compressibility in response to pressure buildup. With non-ideal seals, brine may also leak through the seals into overlying/underlying formations. The quick-assessment method calculates these brine displacement contributions in response to an estimated average pressure buildup in the storage reservoir. The CO₂ storage capacity and the transient domain-averaged pressure buildup estimated through the quick-assessment method were compared with the “true” values obtained using detailed numerical simulations of CO₂ and brine transport in a two-dimensional radial system. The good agreement indicates that the proposed method can produce reasonable approximations for storage–formation–seal systems of various geometric and hydrogeological properties.     

Green sand reclamation using a fluidized bed with an attrition nozzle

The objective of this study was to determine the technical feasibility of green sand reclamation using attrition in a gas–solid fluidized bed. Reclamation of foundry sand is becoming important as it may help solve concerns related to transportation and dumping of the used sand, and reduce production costs by recycling sand. The crucial step in green sand reclamation is the removal of small clay particles that are bound to the sand particles.For this study two different types of green sand were used and supplied by two different foundries. Tests were performed in a fluidized bed equipped with an attrition nozzle operating at pressures of either 350 or 550 kPa (50 or 80 psig). Attrition experiments for one green sand were performed on either unburned or burned (calcined) green sand, to determine the effect of prior calcination of the green sand on its reclamation potential by attrition. Calcination temperatures of over 700 °C were employed, and the results suggest that calcination facilitates the removal of clay from the green sand.Green sand was analyzed for clay and organic content, acid request, and particle size before and after attrition. Attriting calcined green sand produces the best results. Also experiments conducted at the highest attrition pressure of 550 kPa gave good results. According to the mass balance, the mass lost during the attrition process may be limited to less than 14%, and this could be considered acceptable. The volume of air required for the attrition nozzle is rather high and this may adversely affect the economics of the process.     

Do Non-Native Species Threaten The Natural Environment?

Conservation biologists and other environmentalists confront five obstacles in building support for regulatory policies that seek to exclude or remove introduced plants and other non-native species that threaten to harm natural areas or the natural environment. First, the concept of “harm to the natural environment” is nebulous and undefined. Second, ecologists cannot predict how introduced species will behave in natural ecosystems. If biologists cannot define “harm” or predict the behavior of introduced species, they must target all non-native species as potentially “harmful”. an impossibly large regulatory task. Third, loss of species richness may constitute harm to an environment, but introduced organisms typically, generally, and significantly add to species richness in ecosystems. If species richness correlates with desirable ecosystem properties, moreover, such as stability and productivity, as some ecologists believe, then introduced organisms, by increasing species richness, would support those desirable properties. Fourth, one may plausibly argue that extinction constitutes environmental harm, but there is no evidence that non-native species, especially plants, are significant causes of extinction, except for predators in certain lakes and other small island-like environments. Fifth, while aesthetic, ethical, and spiritual values may provide a legitimate basis for invasive species policy, biologists often cite concepts such as “biodiversity” and ecosystem “health” or “integrity” to provide a scientific justification. To assert that non-native species threaten biodiversity or undermine ecosystem health, however, may be to draw conceptual entailments or consequences from definitions of “biodiversity” and “integrity” that arbitrarily exclude non-native species or make the presence of exotic species a per se indicator of decline.     

River channel network design for drought and flood control: A case study of Xiaoqinghe River basin, Jinan City, China

Vulnerability of river channels to urbanization has been lessened by the extensive construction of artificial water control improvements. The challenge, however, is that traditional engineering practices on isolated parts of a river may disturb the hydrologic continuity and interrupt the natural state of ecosystems. Taking the Xiaoqinghe River basin as a whole, we developed a river channel network design to mitigate river risks while sustaining the river in a state as natural as possible. The river channel risk from drought during low-flow periods and flood during high-flow periods as well as the potential for water diversion were articulated in detail. On the basis of the above investigation, a network with “nodes” and “edges” could be designed to relieve drought hazard and flood risk respectively. Subsequently, the shortest path algorithm in the graph theory was applied to optimize the low-flow network by searching for the shortest path. The effectiveness assessment was then performed for the low-flow and high-flow networks, respectively. For the former, the network connectedness was evaluated by calculating the “gamma index of connectivity” and “alpha index of circuitry”; for the latter, the ratio of flood-control capacity to projected flood level was devised and calculated. Results show that the design boosted network connectivity and circuitry during the low-flow periods, indicating a more fluent flow pathway, and reduced the flood risk during the high-flow periods.     

Indicators of Biodiversity and Conservational Wildlife Quality on Danish Organic Farms for Use in Farm Management: A Multidisciplinary Approach to Indicator Development and Testing

Organic farming is expected to contribute to conserving national biodiversity on farms, especially remnant, old, and undisturbed small biotopes, forests, and permanent grassland. This objective cannot rely on the legislation of organic farming solely, and to succeed, farmers need to understand the goals behind it. A set of indicators with the purpose of facilitating dialogues between expert and farmer on wildlife quality has been developed and tested on eight organic farms. “Weed cover in cereal fields,” was used as an indicator of floral and faunal biodiversity in the cultivated land, and “uncultivated biotope area” on the farm was used as a general measure of wildlife habitats. Functional grouping of herbaceous plants (discriminating between “high conservation value” plant species and “competitive”/“ruderal” species) and low mobility butterflies were used as indicators of conservation value, especially focusing on the few sites left with considerable remnant conservation value. The dialog processes revealed that the organic farmers’ ideas and goals of conservation of wildlife quality were not necessarily the same as for biologists; the farmers expressed very different opinions on the biological rooted idea, that wildlife quality is related to the absence of agricultural impact. However, farmers also stated that the information given by the indicators and especially the dialogue with the biologist had influenced their perception and awareness of wildlife. We conclude that, combined with a dialogue process, using these indicators when mapping wildlife quality could be an important key component of a farm wildlife management advisory tool at farm level.     

MODELING ACID MINE DRAINAGE ON A WATERSHED SCALE FOR TMDL CALCULATIONS1

ABSTRACT: The Cheat River of West Virginia is impaired by acid mine drainage (AMD). Fifty‐five of its river segments were placed on the 303(d) list, which required calculations of total maximum daily load (TMDL) to meet the water quality criteria for pH, total iron, aluminum, manganese, and zinc. An existing watershed model was enhanced to simulate AMD as nonpoint source load. The model divided a watershed into a network of catchments and river segments. Each catchment was divided into soil layers, which could contain pyrite, calcite and other minerals. A kinetic expression was used to simulate pyrite oxidation as a function of oxygen in the soil voids. Oxygen in the soil voids was consumed by pyrite oxidation and replenished by earth breathing. The by‐products of pyrite oxidation were calculated according to its mass action equations. Chemical equilibrium was used to account for the speciation of ferrous and ferric irons and precipitation of metal hydroxides. Simulated hydrology and water quality were compared to available data. The USEPA used the calibrated model to calculate the TMDLs in the Cheat River Watershed.     

Place experience, gestalt, and the human–nature relationship

This paper explores some ways in which differing views about the human–nature relationship reflect and are reflected in people's experiences of the places and environments they encounter in their lives. I first describe how ideas of humans being “part of” versus “apart from” nature have appeared in discussions of environmental ethics and management, and suggest how these contrasting views might relate to people's actual experiences of the natural and human aspects of places. Using qualitative survey responses about outdoor places in the midwestern USA to illustrate ideas from phenomenological and gestalt psychology, I show how a sense of the human–nature relationship is conveyed in the gestalt qualities of places and how this may give rise to a feeling of moral responsibility toward nature. I conclude that the experience of human and natural aspects of real places points toward a dialectical view of the human–nature relationship, in which humans can be seen as simultaneously “part of” and “apart from” nature.     

电化学氧化法处理高盐低COD污水研究

文章针对高盐、低COD难降解污水进行电化学氧化法降解有机污染物的研究和试验,介绍了电化学氧化法降解COD、氨氮的原理,探讨了试验对COD、氨氮、聚合物的去除情况,分析了装置的经济性能及试验去除污染物的影响因素。     

川北高台原区废弃煤矿枯水期矿井涌水水化学特征及成因分析

对废弃煤矿矿井涌水的水化学特征及成因进行分析,可为保护矿区地下水环境提供理论支撑.基于地质背景,通过对比枯水季节川北高台原区废弃煤矿矿井涌水与背景泉点水化学指标,并采用聚类分析方法对矿井涌水中离子指标进行统计,进而对其特征及成因进行了研究.结果表明:地层中黄铁矿中硫元素氧化是矿井涌水水化学特征变化的开端,受研究区矿井涌...     

Effect of the effective stress coefficient and sorption-induced strain on the evolution of coal permeability: Experimental observations

Permeability is one of the most important parameters for CO₂ injection in coal to enhance coalbed methane recovery. Laboratory characterization of coal permeability provides useful information for in situ permeability behavior of coal seams when adsorbing gases such as CO₂ are injected. In this study, a series of experiments have been conducted for coal samples using both non-adsorbing and adsorbing gases at various confining stresses and pore pressures. Our observations have showed that even under controlled stress conditions, coal permeability decreases with respect to pore pressure during the injection of adsorbing gases. In order to find out the causes of permeability decrease for adsorbing gases, a non-adsorbing gas (helium) is used to determine the effective stress coefficient. In these experiments using helium, the impact of gas sorption can be neglected and any permeability reduction is considered as due to the variation in the effective stress, which is controlled by the effective stress coefficient. The results show that the effective stress coefficient is pore pressure dependent and less than unity for the coal samples studied. The permeability reduction from helium experiments is then used to calibrate the subsequent flow-through experiments using adsorbing gases, CH₄ and CO₂. Through this calibration, the sole effect of sorption-induced strain on permeability change is obtained for these adsorbing gas flow-through experiments. In this paper, experimental results and analyses are reported including how the impact of effective stress coefficient is separated from that of the sorption-induced strain on the evolution of coal permeability.     

Financial assurance and mine closure: Stakeholder expectations and effects on operating decisions

Financial assurance is increasingly seen as a means to ensure orderly, clean and lasting closure of mines. Broadly interpreted, “closure” requires leaving viable ecosystems on mining lands that are compatible with a healthy environment and with human activities, that have low hazard, and that encompass measures to prevent ongoing pollution from the site in the long-term. Financial assurance encompasses environmental surety instruments that protect the government and public in the event a mining company cannot meet its reclamation or rehabilitation obligations. As such, financial assurance is in essence the money available for closure of the mine in the case when the mine owner is not available to perform the work. A general trend towards greater environmental concern among social stakeholders in mining further serves to focus attention on policies and practices that can actually “assure” financial assurance.Financial assurance is also perceived as a means to address closure-related challenges that are increasing in number as well as diversity. Notably, current trends involve a shift towards a greater focus to the societal aspects of mine closure rather than just the ecological. The use of financial assurance, however, also raises some fundamental questions about how assurance mechanisms influence mining operations and the relationship between mining operations and their surroundings. This paper examines both the internal effect of a variety of financial assurance approaches on mining operations—in particular the manner in which environmental and social concerns are addressed by mining firms, and the almost inevitable tension between some form of financial provision for closure on the one hand, and governmental expectations of tax revenue on the other. As a major argument for supporting the conduct of mining is that state revenues from the extractive industries supply monies for the building of human and infrastructural capital, this second area of tension also has strong social and developmental overtones.