Wellhead treatment costs for groundwater contaminated with pesticides: A preliminary analysis for pineapple in Hawaii

In Hawaii, trace concentrations of pesticides used in the production of pineapple were found in the groundwater supplies of Mililani Town in the Pearl Harbor Basin on the island of Oahu. Groundwater serves as the major source of drinking water and residents pay for wellhead treatment of the contaminated water, via their monthly water bill. The agricultural chemical users within the Pearl Harbor Basin do not include these wellhead treatment costs in their production costs. The agricultural industry benefits from using pesticides but does not pay the entire societal cost of using these chemicals. In this study we evaluate the specific financial cost of wellhead treatment, and not the economic value of groundwater. While wellhead treatment costs could conceivably be shared by several parties, this study focuses on the financial impact of the pineapple industry alone. This study factors annual wellhead treatment costs into annual pineapple production costs to measure the effect on annual financial return from pineapple production. Wellhead treatment costs are calculated from the existing granulated activated carbon (GAC) water treatment facility for Millilani Wells I and II. Pineapple production costs are estimated from previous cost of production studies. The inclusion of wellhead treatment costs produces different production-cost results, depending on the scale of analysis. At the local scale, the Mililani wellhead treatment costs can be factored into the production costs of the pineapple fields, which were probably responsible for contamination of the Mililani Wells, without causing a deficit in economic return. At the larger regional scale, however, the return from all of the pineapple grown in the Pearl Harbor Basin can not sustain the cost of wellhead treatmentfor the entire water supply of the basin. Recommendations point to the prevention of groundwater contamination as more cost-effective measure than wellhead treatment.     

Removal of heavy metal ions from wastewaters: a review

Heavy metal pollution has become one of the most serious environmental problems today. The treatment of heavy metals is of special concern due to their recalcitrance and persistence in the environment. In recent years, various methods for heavy metal removal from wastewater have been extensively studied. This paper reviews the current methods that have been used to treat heavy metal wastewater and evaluates these techniques. These technologies include chemical precipitation, ion-exchange, adsorption, membrane filtration, coagulation-flocculation, flotation and electrochemical methods. About 185 published studies (1988-2010) are reviewed in this paper. It is evident from the literature survey articles that ion-exchange, adsorption and membrane filtration are the most frequently studied for the treatment of heavy metal wastewater.     

Characteristic levels of heavy metals in soil profiles of automobile mechanic waste dumps in Nigeria

The characteristic levels of heavy metals (Cd, Cr, Cu, Pb, Ni and Zn) of soil profiles of automobile mechanic waste dumps were studied. The concentration of heavy metals decreased with the depth of the profile and lateral distance from the dumpsites. The levels found in this study exceeded background concentrations and limits for agricultural and residential purposes. The distribution pattern of heavy metals in the soil profiles were in the following order Pb > Zn > Cu > Cd > Ni > Cr. The mechanic waste dumps represent potential sources of heavy metal pollution to environment. The elevated levels of heavy metals in these soil profiles constitute a serious threat to both surface and groundwater.     

Assessment of heavy metal pollutants accumulation in the Tisza river sediments

In this study we have worked on the evaluation of heavy metal contamination in the sediments taken from the Tisza River and its tributaries, and thereby used the sequential extraction method, geochemical normalization, the calculation of the enrichment factor (EF), and the methods of statistical analysis. The chemical fractionation of Ni, Cu, Zn, Cr, Pb, Fe, and Mn, carried out by using the modified Tessier method, points to different substrates and binding mechanisms of Cu, Zn and Pb in sediments of the tributaries and sediments of the Tisza River. The similarities in the distributions of Fe and Ni in all types of sediments are the result of geochemical similarity as well as of the fact that natural sources mainly affect the concentration levels of these elements. The calculated enrichment factors (EF, measured metal vs. background concentrations) indicated that metal contamination (Cu, Pb, Zn and Cr) was recorded in the sediments of the Tisza River, while no indications of pollution were detected in the tributaries of the Tisza River and the surrounding pools. The maximum values of the EF were close to 6 for Cu and Pb (moderately severe enrichment) and close to 4.5 for Zn (indicating moderate enrichment). It can be said that the Tisza River is slightly to moderately severely polluted with Cu, Zn, and Pb, and minorly polluted with Cr. It is concluded that sediments of the Tisza serve as a repository for heavy metal accumulation from adjacent urban and industrial areas.     

Heavy metal distribution and chemical speciation in tailings and soils around a Pb-Zn mine in Spain

Soil pollution by lead, zinc, cadmium and copper was characterized in the mine tailings and surrounding soils (arable and pasture lands) of an old Spanish Pb-Zn mine. Sixty soil samples were analyzed, determining the total metal concentration by acid digestion and the chemical fractionation of Pb and Zn by the modified BCR sequential extraction method. Samples belonging to mine waste areas showed the highest values, with mean concentrations of 28,453.50 mg kg(-1) for Pb, 7000.44 mg kg(-1) for Zn, 20.57 mg kg(-1) for Cd and 308.48 mg kg(-1) for Cu. High concentrations of Pb, Zn and Cd were found in many of the samples taken from surrounding arable and pasture lands, indicating a certain extent of spreading of heavy metal pollution. Acidic drainage and wind transport of dust were proposed as the main effects causing the dispersion of pollution. Sequential extraction showed that most of the Pb was associated with non-residual fractions, mainly in reducible form, in all the collected samples. Zn appeared mainly associated with the acid-extractable form in mine tailing samples, while the residual form was the predominant one in samples belonging to surrounding areas. Comparison of our results with several criteria reported in the literature for risk assessment in soils polluted by heavy metals showed the need to treat the mine tailings dumped in the mine area.     

Improvement of soil quality after "alperujo" compost application to two contaminated soils characterised by differing heavy metal solubility

Reclamation of trace element polluted soils often requires the improvement of the soil quality by using appropriate organic amendments. Low quality compost from municipal solid waste has been tested for reclamation of soils, but these materials can provide high amounts of heavy metals. Therefore, a high-quality compost, with low levels of heavy metals, produced from the main by-product of the Spanish olive oil extraction industry ("alperujo") was evaluated for remediation of soils affected by a pyritic mine sludge. Two contaminated soils were selected from the same area: they were characterised by differing pH values (4.6 and 7.3) and total metal concentrations, which greatly affected the fractionation of the metals. Compost was applied to soil at two rates (equivalent to 48 and 72 Tm ha(-1)) and compared with an inorganic fertiliser treatment. Compost acted as an available nutrient source (C, N and P) and showed a low mineralisation rate, suggesting a slow release of nutrients and thus favouring long term soil fertility. In addition, the liming effect of the compost led to a significant reduction of toxicity for soil microorganisms in the acidic soil and immobilisation of soil heavy metals (especially Mn and Zn), resulting in a clear increase in both soil microbial biomass and nitrification. Such positive effects were clearly greater than those provoked by the mineral fertiliser even at the lowest compost application rate, which indicates that this type of compost can be very useful for bioremediation programmes (reclamation and revegetation of polluted soils) based on phytostabilisation strategies.     

Eco-efficiency in contaminated land management in Finland – Barriers and development needs

In Finland the number of potentially contaminated sites totals ca. 20?000. The annual costs of remediation are 60–70 million euros. Excavation combined with disposal or off-site treatment is the most common soil remediation method. To define which factors make contaminated land management (CLM) eco-efficient and to study whether eco-efficiency has been considered in CLM decisions we carried out a literature survey, two stakeholder seminars, thematic interviews and a questionnaire study on economic instruments. Generally speaking, eco-efficiency means gaining environmental benefits with fewer resources. To assess its realization in CLM, it is necessary to have a more specific definition. In our study, we arrived at a list of several qualifications for eco-efficiency. It was also shown that eco-efficiency has hardly been a real issue in the selection of remediation techniques or generally, in the decision-making concerning contaminated sites. The existing policy instruments seem to be insufficient to promote eco-efficiency in CLM. Several concrete barriers to eco-efficiency also came up, urgency and lack of money being the most important. The scarcity of the use of in situ remediation methods and the difficulties involved in recycling slightly contaminated or treated soil were considered to be major problems. Insufficient site studies, inadequate or unsuitable methods for risk assessment and cost evaluation, and deficient and mistimed risk communication can also hinder the realization of eco-efficiency. Hence, there is a need to promote the use of more eco-efficient remediation techniques and to develop CLM policy instruments, guidelines, and participatory processes and methods to assess the eco-efficiency of CLM options.     

Status and fuzzy comprehensive assessment of combined heavy metal and organo-chlorine pesticide pollution in the Taihu Lake region of China

The status of combined heavy metal and organo-chlorine pesticide (OCPs; i.e. HCH and DDT) pollution was investigated and the soil environmental quality of the Taihu Lake watershed, one of the most developed regions in China, was evaluated using a fuzzy comprehensive assessment. Statistical analyses showed the presence of combined pollution in the soil. At many sampling sites, heavy metal concentrations were above corresponding background values, indicating the effects of extraneous pollutants. It has been over 20 years since China banned the use of OCPs, but they can still be found in soil samples of this region. HCH levels at all investigated sites were below the Chinese Environmental Quality Standard for Soils. Fuzzy comprehensive assessment showed that the overall soil quality in this region could be categorized as class I. Nevertheless, the high coefficients of variation for levels of DDT, Cd and Hg indicated the existence of some point-source pollution. Continuous monitoring and further studies of the region are recommended to prevent pollution of farmland from these sources.     

A procedure to design a Permeable Adsorptive Barrier (PAB) for contaminated groundwater remediation

A procedure to optimize the design of a Permeable Adsorptive Barrier (PAB) for the remediation of a contaminated aquifer is presented in this paper. A computer code, including different routines that describe the groundwater contaminant transport and the pollutant capture by adsorption in unsteady conditions over the barrier solid surface, has been developed. The complete characterization of the chemical–physical interactions between adsorbing solids and the contaminated water, required by the computer code, has been obtained by experimental measurements. A case study in which the procedure developed has been applied to a tetrachloroethylene (PCE)-contaminated aquifer near a solid waste landfill, in the district of Napoli (Italy), is also presented and the main dimensions of the barrier (length and width) have been evaluated. Model results show that PAB is effective for the remediation of a PCE-contaminated aquifer, since the concentration of PCE flowing out of the barrier is everywhere always lower than the concentration limit provided for in the Italian regulations on groundwater quality.     

Utilization of pulp and paper industrial wastes to remove heavy metals from metal finishing wastewater

Two pulp and paper industrial wastes, lime mud (LM) and recovery boiler ash (RB), have low moisture contents, low heavy metal contaminations and contain various carbonate compounds which contribute to a high pH. Metal finishing wastewater (MF-WW) has a low pH, high levels of TDS and high contaminations from Cr, Cu, Pb and Zn. The heavy metals from MF-WW were removed by sorption and precipitation mechanisms. LM gave better results in removing heavy metals from MF-WW than RB. At a reaction time of 45 min, the maximum removal efficiencies for Cr (93%) and Cu (99%) were obtained at 110 g L⁻¹ of LM, but at 80 g L⁻¹ for Pb (96%) and Zn (99%). Treatment with LM gives a higher sludge volume than with RB. However, the leachability of heavy metals from LM is lower. Leachability of heavy metals in the sediment for all selected treatment conditions is within government standards.     

Field reconnaissance and estimation of petroleum hydrocarbon and heavy metal contents of soils affected by the Ebocha-8 oil spillage in Niger Delta, Nigeria

Field reconnaissance of the Ebocha-8 oil spill-affected site at Obiobi/Obrikom in the Niger Delta region of Nigeria was carried out to assess the extent of damage to the terrestrial ecosystem and delimit the epicenter of oil spillage. Following three successive reconnaissance surveys, the area to be sampled was delimited (200 x 200 m2), and soil samples were collected using the grid method from three replicate quadrats at two depths, surface (0-15 cm) and subsurface (15-30 cm). A geographically similar area located 50 m adjacent to the oil-polluted area was used as a reference (control) site. Total hydrocarbon content (THC) and heavy metal concentrations were later determined in the laboratory by extraction and spetrophotemetric techniques. Generally, the THC of soils at surface and subsurface depths of the oil-polluted plots was 2.06 x 10(4) +/- 4.97 x 10(3) mg/kg and 1.67 x 10(3) +/- 3.61 x 10(2) mg/kg soil, respectively, (no overlap in standard errors at 95% confidence limit) while concentrations of heavy metals(Pb, Cd, V, Cu and Ni) were enhanced, especially at the surface. The high levels of THC and heavy metals may predispose the site, which hitherto served as arable agricultural land, to impaired fertility and possible conflagration. When concentrations of heavy metals reach the levels obtained in this study, they may become toxic to plants or possibly bio-accumulate, thus leading to toxic reactions along the food chain. While the spilled-oil may have contributed to the enhanced levels of the metals in the affected soils, physico-chemical properties of the soils, mobility of metals, and the intense rainfall and flooding that preceded the period of study may have also contributed in part to their enhanced concentrations. The presence of high hydrocarbon content may cause oxygen deprivation, which may result in the death of soil fauna by asphyxiation. There is, therefore, an urgent need to clear the affected site of these excess hydrocarbon deposits so as to enhance the rehabilitation process of the affected mat layer of soils. Other appropriate mitigating measures, such as subsequent monitoring of hydrocarbon levels at suitable intervals after the clean up activities, are also recommended, with reference to the findings of this study, for effective management of the affected area.     

动电技术去除城市污泥中重金属的可行性探讨

本文简要介绍了我国城市污泥的处理处置和利用现状及动电技术去除重金属的基本原理,分析动电技术处理土壤中重金属的国内外的试验研究和应用情况,对动电技术处理城市污泥中重金属的可行性进行探讨,认为动电技术去除城市污泥中的重金属具有可行性,并提出了今后研究的方向.     

污染土壤淋洗修复技术研究进展

本文介绍了淋洗修复技术和淋洗装置在污染土壤修复技术中的应用,对有机物、重金属及放射性核素污染土壤淋洗修复技术的应用现状进行了总结和评价,还探讨了淋洗修复技术的发展方向及其应用前景。     

Evaluation of groundwater contamination beneath an urban environment: the Besòs river basin (Barcelona, Spain)

The urban groundwater of the central Besòs river basin (the La Llagosta aquifer) has become contaminated due to the infiltration of wastewater from septic tanks and sewage networks, and by industrial activities located in urban areas. The groundwater hydrogeochemistry of the La Llagosta aquifer was characterized using isoconcentration maps, hydrogeochemical diagrams (Piper, Schoeller-Berkaloff) and by analyzing hydrogeochemical changes along a flow-path that crosses an urban and peripheral industrial area in the main alluvial aquifer (the La Llagosta unit). The evolution of cations, anions and heavy metals along the flow path and the use of the PHREEQC numerical code indicate a complex set of geochemical processes, which result from the interaction between the sources of pollution, the groundwater flow and the mineral composition of the aquifer materials. The contaminated groundwater below the urban areas shows high contents of NO(3)(-) (90-100 mg/L) and an increase in the concentrations of Ca(2+) and Mg(2+) which coincides with a decrease in pH. The Eh shows greater variation than the pH along the flow line studied, with values ranging between 56 mV in the industrial area and 370 mV in the urban area. The area with the lowest Eh value coincides with the highest concentrations of dissolved Fe (4.7 mg/L) and Mn (0.22 mg/L).     

Binding of heavy metal contaminants onto chitosans--an evaluation for remediation of metal contaminated soil and water

The binding efficiency of chitosan samples for Ag(+), Cd(2+), Cu(2+), Pb(2+) and Zn(2+) has been evaluated in order to consider their application to remediate metal contaminated soil and water. The sorption behaviour of metal ions was assessed using a batch technique at different contact time and initial metal concentration with different background electrolytes. The kinetics followed a pseudo-second-order model, while the equilibrium data correlated well with the Freundlich and Langmuir isotherm models. For example, the maximum sorption capacity (Q) for chitosan was estimated as 1.93 mmol/g for Ag(+), 1.61 mmol/g for Cu(2+), 0.94 mmol/g for Zn(2+), 0.72 mmol/g for Cd(2+) and 0.64 mmol/g for Pb(2+). Covalent interaction between metal ions and functional groups (amino and hydroxyl) of the chitosans was the main binding mechanism. Ion exchange is not an important process. Chitosan and cross-linked chitosans were able to bind metal ions in the presence of K(+), Cl(-) and NO(3)(-). The nature of Cl(-) and NO(3)(-) ions did not affect Zn(2+) binding by the chitosans. Even at 11x dilution, the chitosans were able to retain metal ions on their surfaces.     

应用植物重金属超富集机理修复土壤复合污染的研究现状与展望

超积累植物在修复土壤重金属污染中起着重要的作用,但由于重金属复合污染的存在,许多植物并未能完全适用于实际修复中。本文通过阐述土壤重金属复合污染,参考近年来国际上对超积累植物富集机理的研究,从土壤重金属复合污染自身的交互作用,超积累植物根系活化机理,吸收和运输通道机制,金属配位体的运输与解毒作用,以及细胞分室化现象等各个阶段探讨与展望土壤重金属复合污染修复研究问题。     

Biosorption of heavy metals by activated sludge and their desorption characteristics

The biosorption of different metals (Cu2+, Cd2+, Zn2+, Ni2+ and Pb2+) was investigated using activated sludge. The optimum pH was 4 for Cd, Cu and Pb sorption and 5 for Ni and Zn. Biomass metal uptake clearly competed with protons present in the aqueous medium, making pH an important variable in the process. Protons consumed by biomass in control tests versus protons exchange in biosorption tests confirmed a maximum exchange between metal cations and protons at pH 2. The study of the influence of biomass concentration revealed that the amount of protons released from biomass increased with biomass concentration. This would confirm the hypothesis of ion exchange between both types of ions. The application of the Langmuir and Freundlich models showed a better fitting of experimental data to the first model. The maximum sorption uptake of the studied metals by the activated sludge showed the following decreasing order: Pb>Cu>CdZn>Ni. Desorption experiments showed that HCl was a good eluent for the five metals tested, particularly at low pH values (1 and 2). At pH 3 or 4 the desorption yield was significantly lower. However, its use did not allow the reuse of biomass in subsequent loading and unloading cycles. EDTA was also a good desorption agent, achieving the total recovery for the five metals tested at a concentration of 1mM, with the advantage that biomass could be reused for three sorption-desorption cycles.     

Remediation of saturated soil contaminated with petroleum products using air sparging with thermal enhancement

Pollutants in the form of non-aqueous phase liquids (NAPLs), such as petroleum products, pose a serious threat to the soil and groundwater. A mathematical model was derived to study the unsteady pollutant concentrations through water saturated contaminated soil under air sparging conditions for different NAPLs and soil properties. The comparison between the numerical model results and the published experimental results showed acceptable agreement. Furthermore, an experimental study was conducted to remove NAPLs from the contaminated soil using the sparging air technique, considering the sparging air velocity, air temperature, soil grain size and different contaminant properties. This study showed that sparging air at ambient temperature through the contaminated soil can remove NAPLs, however, employing hot air sparging can provide higher contaminant removal efficiency, by about 9%. An empirical correlation for the volatilization mass transfer coefficient was developed from the experimental results. The dimensionless numbers used were Sherwood number (Sh), Peclet number (Pe), Schmidt number (Sc) and several physical-chemical properties of VOCs and porous media. Finally, the estimated volatilization mass transfer coefficient was used for calculation of the influence of heated sparging air on the spreading of the NAPL plume through the contaminated soil.     

Headcut erosive regimes influenced by groundwater on disturbed agricultural soils

A series of simulated rainfall experiments, testing several soils and slope gradients in a 10 m × 0.8 m laboratory flume, displayed close correlations between initial development of a water table at a 10 cm depth and highly erosive headcut formation. On some soils and gradients, highly erosive headcuts formed consistently and predictably within minutes or seconds of initial water table rise. However, headcuts alone were not good indicators of increased erosion. In most experiments some headcuts formed early, often when surface hydraulic parameter values reached established rill initiation thresholds, but resulted in little or no erosion increase. Later, at initial water table rise, other headcuts formed coincident with major erosion increase, often with surface hydraulic values then less than rill initiation thresholds. On the four soils tested, highly erosive headcuts never formed without groundwater development, except on steep 9° slopes.     

土壤污染的健康危害与修复技术

土壤污染是当今社会面临的重要环境问题之一,已经对人体健康构成了严重威胁。本文将土壤污染物分为有机污染物、无机污染物、生物污染物和放射性污染物,并阐述了各类污染物对人体健康的危害,介绍了具有广阔应用前景的污染土壤修复技术,即植物修复技术和微生物修复技术。最后,本文还对解决土壤污染问题提出了具体的建议。