Deferoxamine pretreatment inhibits metal neurotoxicity in Caenorhabditis elegans

Neurodegenerative diseases are increasingly common in humans. Alzheimer's disease (AD) is a neurodegenerative disease characterized by the presence of extracellular plaques containing β‐amyloid peptides and neurofibrillary tangles in the brains. Researchers have focused on the elucidation of a correlation between high concentrations of aluminum or iron (in the organism with observed neuropathology). The objective of this study was to evaluate the effects of aluminum and iron on the behavioral parameters (pharyngeal pumping and defecation cycle) of the nematode Caenorhabditis elegans pretreated with deferoxamine (DFX). Acetylcholinesterase (AChE) activity was evaluated as well. DFX is a chelant that is widely used for the treatment of metal toxicity, and it has a high affinity for aluminum and iron. The worms were pretreated with DFX, and then exposed to aluminum and iron. In the absence of DFX, aluminum exposure decreased pharyngeal pumping compared with that in the control group. The defecation cycle of the control was significantly different from that of the worms exposed to aluminum. In contrast, an increased defecation cycle was observed in worms exposed to iron without DFX pretreatment. AChE activity increased in aluminum‐exposed groups that received DFX pretreatment compared with those that did not receive pretreatment. These results suggest that pretreatment with DFX is effective in reducing metal toxicity, particularly with reference to AChE activity, which did not decrease in groups that did not receive DFX pretreatment.     

基于腐蚀损伤表征参数的铝合金预腐蚀疲劳裂纹扩展修正模型

服役环境中的腐蚀介质会在铝合金表面形成以腐蚀坑为代表的典型点蚀形貌。在疲劳载荷作用下,这些腐蚀坑会有助于裂纹的萌生,加速并影响其扩展行为,威胁结构安全。考虑腐蚀坑的影响,建立了一个基于腐蚀损伤表征参数的线弹性裂纹扩展表征模型。利用航空结构中常见承力构件所采用的LD2铝合金进行验证性实验。结果表明,所建立的模型能够反映出腐蚀损伤对于裂纹扩展行为的影响,对于铝合金构件的腐蚀疲劳寿命预测和损伤容限评估具有参考价值。     

Aluminum recovery from electronic scrap by High-Force® eddy-current separators

The amount of electronic scrap which contains a substantial portion of non-ferrous metals, primarily copper and aluminum, has been growing. The present study is directed toward aluminum recovery by a newly developed eddy current separator. The investigation on shredded personal computer and printed circuit board scrap demonstrates that the High-Force® eddy-current separator will be applicable for this purpose. It has been shown that, by a single pass of the materials on the High-Force® eddy-current separator, an aluminum concentrate out of personal computer scrap can be obtained with a purity of 85%, while maintaining a recovery in excess of 90%, with the feed rate being up to 0.3 kg/min.     

The toxicological paradigms of aluminum and the etiology of Alzheimer's disease in the nematode Caenorhabditis elegans

This study examined behavioral and enzymatic changes of C. elegans from its exposure to aluminum, and the resulting relationship with Alzheimer's disease. After chronic and acute exposure to aluminum, the results indicated that it alters the cholinergic status and behavior parameters of the nematode, suggesting a relationship between exposure to aluminum and the etiology of AD.     

The impact of monetary liquidity on Chinese aluminum prices

By expanding Frankel and Rose's (2009) theoretical model to consider the interaction of commodity prices with both money liquidity and expectation formation, this paper empirically studies the long-run relationship and short-term dynamics between aluminum prices and money liquidity via Vector autoregressive (VAR) and Impulse Response Function methodologies. Our results show that: (1) a cointegration relationship between money liquidity and Chinese aluminum prices exists, and monetary liquidity positively significantly influences the price over long periods; (2) a structural change has been found during the 2008 Financial Crisis and the change of Chinese monetary policies; and (3) the negative impact of production capacity mechanism on aluminum prices coexists with the positive impact of financial asset returns mechanism, to allow for varied market expectations on aluminum prices within and outside China.     

Environmental consequences of recycling aluminum old scrap in a global market

Nowadays, aluminum scrap is traded globally. This has increased the need to analyze the flows of aluminum scrap, as well as to determine the environmental consequences from aluminum recycling. The objective of this work is to determine the greenhouse gases (GHG) emissions of the old scrap collected and sorted for recycling, considering the market interactions. The study focused on Spain as a representative country for Europe. We integrate material flow analysis (MFA) with consequential life cycle assessment (CLCA) in order to determine the most likely destination for the old scrap and the most likely corresponding process affected. Based on this analysis, it is possible to project some scenarios and to quantify the GHG emissions (generated and avoided) associated with old scrap recycling within a global market. From the MFA results, we projected that the Spanish demand for aluminum products will be met mainly with an increase in primary aluminum imports, and the excess of old scrap not used in Spain will be exported in future years, mainly to Asia. Depending on the scenario and on the marginal source of primary aluminum considered, the GHG emission estimates varied between −18,140 kg of CO₂ eq. t⁻¹ and −8427 of CO₂ eq. t⁻¹ of old scrap collected. More GHG emissions are avoided with an increase in export flows, but the export of old scrap should be considered as the loss of a key resource, and in the long term, it will also affect the semifinished products industry. Mapping the flows of raw materials and waste, as well as quantifying the GHG impacts derived from recycling, has become an essential prerequisite to consistent development from a linear toward a circular economy (CE).     

双极铝电极电凝聚除氟研究

一种投资不大的脱氟方法——双极铝电极电凝聚脱氟法,用模拟水样研究电极间距、氟化物浓度、温度以及溶液的ｐＨ值对电凝聚的影响,并对其优化条件进行了探讨。同时,用南阿尔及利亚水样讨论了电流密度和面积／体积比率对脱氟作用的影响。研究表明：用双极铝电极电凝聚法去除撒哈拉水中的氟化物不需加可溶性盐。铝与氟化物的质量比为１７：１。     

Effects of alum and aluminum chloride on phosphorus runoff from swine manure

Phosphorus (P) runoff from fields fertilized with swine (Sus scrofa domesticus) manure may contribute to eutrophication. The objective of this study was to evaluate the effect of aluminum sulfate (alum) and aluminum chloride applications to swine manure on P runoff from small plots cropped to tall fescue (Festuca arundinacea Shreb.). There were six treatments in this study: (i) unfertilized control plots, (ii) untreated manure, (iii) manure with alum at 215 mg Al L(-1), (iv) manure with aluminum chloride at 215 mg Al L(-1), (v) manure with alum at 430 mg Al L(-1), and (vi) manure with aluminum chloride at 430 mg Al L(-1). Manure application rates were equivalent to approximately 125 kg N ha(-1). Alum and aluminum chloride additions lowered soluble reactive phosphorus (SRP) levels from about 130 mg P L(-1) to approximately 30 mg P L(-1) at low rates. At high rates, SRP levels in swine manure were around 1 mg P L(-1). Soluble reactive P concentrations in runoff were 5.50, 3.66, 3.00, 0.87, 0.87, and 0.55 mg P L(-1), for normal manure, low alum, low aluminum chloride, high alum, high aluminum chloride, and unfertilized control plots, respectively. Hence, high alum and aluminum chloride reduced SRP concentrations in runoff by 84% and were not statistically different from SRP concentrations in runoff from unfertilized control plots. These data indicate that treating swine manure with alum or aluminum chloride could result in significant reductions in nonpoint-source P runoff.     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

Anheuser-busch's a pledge and a promise: Total employee involvement

Anheuser-Busch is a large, diversified corporation, both in its products and in its environmental efforts. It is well-known that Anheuser-Busch is the world'S largest brewer, with twelve operating breweries and a thirteenth under construction. It also operates the largest aluminum can recycling network in the world, Anheuser-Busch Recycling (A-BR). A-BR recycled more than 600 million pounds of aluminum in 1991, or more than 17 billion cans. This article describes how Anheuser-Busch has put TQEM ideas into practice involving all of its employees.     

废旧铝、铁片粉煤灰复合混凝剂的制备及在废水处理中的应用

我国粉煤灰和铝、铁片固体废物产量日益增多,危害越来越严重。在高温加热、搅拌条件下,用强酸浸渍粉煤灰和易拉罐碎片,使粉煤灰和废旧铝、铁片资源化,制得废旧铝、铁片粉煤灰复合混凝剂,并用所制得的废旧铝、铁片粉煤灰复合混凝剂处理屠宰废水。在一定条件下,经混凝试验处理后的屠宰废水pH值在7左右,COD去除率为92．0％,SS去除率为98．7％,浊度去除率为98．4％,色度去除率为96．6％。结果表明,粉煤灰和废旧铝、铁片资源化和在废水处理中的应用具有可行性。     

基于两参数Weibull模型的预腐蚀2A12铝合金材料裂纹萌生寿命评估

铝合金在航空工业中广泛应用,因此对于铝合金构件的寿命评估很重要。腐蚀损伤使得裂纹容易萌生,因此降低铝合金结构的疲劳寿命。铝合金构件在其服役过程中,裂纹萌生寿命占据了大部分的时间,研究腐蚀损伤对于铝合金材料的裂纹萌生寿命的影响具有重要意义。由于腐蚀疲劳影响因素众多,数据分散性很大,因此本文引入weibull分布模型评估腐蚀疲劳裂纹扩展,对于损伤容限评估具有重要意义。     

WATER YIELD INCREASES THROUGH SURFACE DUSTING OF A PERMANENT ICEFIELD1

ABSTRACT: Water yields from a permanent icefield were increased by 28 percent through surface dusting with carbon black. On July 4, 1972, approximately 15 acres (60,700 m²) of a permanent icefield were treated with 150 lbs. per acre (16.8 g/m²) of commercial carbon black. The icefield was located on the eastern slope of the Colorado Front Range at an elevation of 11,500 feet (3500 m). The carbon black was applied by helicopter using a dry applicator slung below a helicopter. The treatment effect was evaluated by control plot observations of melt and streamflow comparison before and after treatment. The ablation plot studies and runoff comparison with an adjacent watershed both indicated a 28 percent increase in ablation and meltwater runoff, respectively, for the months of July and August. The study indicates icefields could be used as cold-storage reservoirs for use in periods of critical water shortages.     

对电解铝厂周边氟污染的环境影响评价

通过测定广西某电解铝厂周边大气、土壤和农作物中氟化物含量,对该厂周边的氟化物污染进行了评价,结果表明：电解铝厂周围大气氟污染与采样点的方位成显著相关关系;农作物玉米叶片氟污染主要来自于电解铝厂无组织排放的氟化物,而土壤中总氟含量除受大气中氟化物的影响外,还与当地的地质构造、土壤类型等因素有关,与主导风向无明显的相关关系,土壤中水溶氟含量与采样点到电解铝厂距离呈负相关。     

聚硅酸硫酸铝絮凝剂的研制和性能研究

聚硅酸硫酸铝是一种新型无机阳离子型高效絮凝剂，本文就其研制及应用进行了探索。实验成功地研制了不同Al／Si的产品，并进行了絮凝比较实验。结果表明，Al／Si值是影响其作用效果的关键，其他影响因素还有：pH值、絮凝刺投加量、絮凝温度以及原水性质等，并在经济核算的基础上确定了最佳絮凝条件。该产品可应用于任何可以利用高聚物析出氢氧化铝凝胶系统的场合。     

Preliminary evaluation of the electrochemical and chemical coagulation processes in the post-treatment of effluent from an upflow anaerobic sludge blanket (UASB) reactor

The main objective of this paper was to perform a preliminary comparative study between chemical and electrochemical coagulation processes, both followed by flocculation and sedimentation of an effluent from an upflow anaerobic sludge blanket (UASB) reactor treating simulated wastewater from an unbleached Kraft pulp mill. The electrochemical treatment removed up to 67% (with aluminum electrodes) and 82% (with stainless-steel electrodes) of the remaining chemical oxygen demand (COD) and 84% (stainless steel) and 98% (aluminum) of the color in the wastewater. These efficiencies were achieved with an energy consumption ranging from 14 to 20 Wh l(-1). The coagulation-flocculation treatment with ferric chloride and aluminum sulfate removed up to 87% and 90% of COD and 94% and 98% of color, respectively. The addition of a high molecular weight cationic polymer enhanced both COD and color removal efficiencies. The two post-treatment processes proved to be technically feasible; however the economical feasibility could not be assessed since the experiments were performed with small reactors that could distort scale factors.     

Aluminium recovery

On 1 November 1977 over 30 representatives of private and government resource recovery programmes were invited to Richmond, Virginia, USA, for an intensive briefing on the state of the art of aluminum recovery from municipal and commercial wastes. The seminar was one of a series organised by the National Center for Resource Recovery (NCRR) in cooperation with industry groups. Reynolds Aluminum, the USA's second largest aluminum producer, cosponsored and hosted the meeting.     

Effect of long‐term exposure to aluminum and high‐fat diet on NTPDase and 5′‐nucleotidase activities in lymphocytes and platelets of rats

Aluminum is one of the most abundant metals in the earth's crust. Although it shows no known biological function, it is recognized as an adjuvant in vaccines for human and veterinary uses. This study aims to evaluate the role of lifestyle and environment in the promotion of chronic disease. In it, we associated two factors: chronic exposure to aluminum and high‐fat diets. Thus, we aimed to determine whether the association of long‐term exposure to aluminum and high‐fat diets affects the NTPDase and 5′‐nucleotidase activities in the blood platelets and lymphocytes obtained from the mesenteric lymph nodes of young rats. In fact, the ectonucleotidase activities were shown to be upregulated upon exposure to aluminum plus high‐fat diets. As a result, we can suggest that the progressive upregulation of ectonucleotidase activities that we observed could be controlling the extent of inflammation and immune response.     

Electrocoagulation of vegetable oil refinery wastewater using aluminum electrodes

Electrocoagulation with aluminum electrodes was used to treat the vegetable oil refinery wastewater (VORW) in a batch reactor. The effects of operating parameters such as pH, current density, PAC (poly aluminum chloride) dosage and Na(2)SO(4) dosage on the removal of organics and COD removal efficiency have been investigated. It has been shown that the removal efficiency of COD increased with the increasing applied current density and increasing PAC and Na(2)SO(4) dosage and the most effective removal capacity was achieved at the pH 7. The results indicate that electrocoagulation is very efficient and able to achieve 98.9% COD removal in 90 min at 35 mAcm(-2) with a specific electrical energy consumption of 42 kWh(kgCOD(removed))(-1). The effluent was very clear and its quality exceeded the direct discharge standard.     

Exploration's Role in Iron and Aluminum Supply Since the Second World War

This paper analyses the role of exploration in the worldwide supply of iron and aluminum by (1) reviewing changes in the level and geographic distribution of exploration since 1945, (2) studying important discoveries, and (3) comparing exploration's role in iron and aluminum supply with its role in the supply of other metals. It finds that even though exploration and discovery of new deposits account for part of the tremendous postwar expansion in the level and geographic distribution of iron ore and bauxite production, most of the areas that became major producers were known to contain significant mineralization long before detailed evaluation, development, and mining occurred. These areas needed increased consumer demand, lower ocean freight costs, or improved processing techniques to become economically attractive. Iron and aluminum are easier-to-find yet harder-to-process, and compared with other metals, discovering a better deposit will not reduce overall costs to the same degree as other cost-reducing forms of investment.