共查询到20条相似文献,搜索用时 105 毫秒
1.
2.
3.
4.
5.
6.
基于连续介质力学及有限变形理论 ,建立了用于三维板料成形过程模拟的有限元模型 ,开发了动力显式算法的板料成形过程模拟的有限元分析程序DESSFORMM3D。最后 ,用笔者新开发的动力显式弹粘塑性有限元程序对不同压边情况下半球形件的拉深过程进行分析 ,并把数值结果与实验进行对比 ,验证了软件的计算结果。 相似文献
7.
板料成形后的回弹对精度影响较大,在数值模拟时对回弹进行精确预测显得非常重要。分析比较了几种计算板料回弹方法的优缺点,提出了用静态隐式算法计算回弹较为合适,以MARC为平台建立了计算板料回弹的系统。计算了二维弯曲成形后的回弹,并通过与实验结果相比较两者结果的一致性验证了计算的可靠性。 相似文献
8.
介绍了金属板料激光冲击成形技术的系统组成、成形原理、技术特点 ,以及影响板料激光冲击成形的主要因素。指出了激光冲击成形技术在工业中应用所必须研究的一些主要内容。 相似文献
9.
10.
11.
大型原油储库自动消防系统由前端报警设备、自控系统、工业电视监控系统、泡沫发生系统和执行机构等5部分组成,对5个组成部分的原理进行了简要描述。 相似文献
12.
13.
14.
15.
16.
沿海机场某型飞机典型结构件自然曝晒试验研究 总被引:3,自引:3,他引:0
目的研究某型飞机典型结构件的腐蚀机理。方法在海南陵水机场进行自然曝晒试验,采用表面宏观形貌记录和微观形貌表征法、腐蚀产物物相分析等手段对基体及上覆防护体系的腐蚀、老化性能进行评估,进而得出该型飞机不同部位的防护性能变化规律。结果其中试件边缘、与螺栓直接接触的部位和试件连接处涂层老化、脱落最为严重,涂层脱落后裸露的基体也会出现较为严重的腐蚀现象;而一般远离螺栓、边缘和断口的区域则涂层老化、脱落均匀,腐蚀程度较轻。结论相同环境谱作用下,受力壁板连接关键部位不同部位发生腐蚀的类型、机理不同。 相似文献
17.
论述了塑料模具标准件、通用件制造工艺数据库的开发过程。利用C++编程实现对数据库的检索、管理及用户界面设计,利用SQLServer建立工艺数据库,运用API编程技术完成工序图生成和编辑,采用ADO技术对数据库进行访问,以及系统的功能。 相似文献
18.
The need for quality control of the complex micro-structure has been growing due to increased production of parts with complex 3D micro-scale features. However, wide use of 3D metrology of miniature parts is difficult due to the lack of cost-effective and precise probing system at the micro-scale. This paper introduces a new probing system using a wire-based probe and acoustic emission (AE)-based sensing method. The design of the probing system allows the size of the probe to be varied relatively easily. Repeatability of less than 1 μm has been achieved with the proposed probing system. 相似文献
19.
《Journal of Manufacturing Processes》2002,4(2):148-152
This paper reports on preliminary results involving an experimental rapid prototyping process known as 3-D laser printing. The system builds parts by repeatedly laser printing thermoplastic cross-sectional “slice” images of a part one on top of the next. With each new layer, the total build thickness increases until the part is complete. An interesting extension to this system involves the use of a color print engine to produce selectively colored parts. Conventional rapid prototyping processes generally do not allow this sort of selective coloring. Initial results indicate that the system has considerable potential and warrants continued investigation. 相似文献
20.