Preparation and characterization of a new TiO2/SiO2 composite catalyst for photocatalytic degradation of indigo carmin

The TiO₂/SiO₂ composite was prepared by means of the SiO₂-particle-entrapment method. The FTIR data showed the presence of Si–O–Ti stretching vibration band at 970 cm⁻¹ in the TiO₂/SiO₂ composite, suggesting a reaction between TiO₂ and silica on the TiO₂ particle surface during the silicagel formation around the TiO₂ particles. The photocatalytic efficiency of TiO₂ immobilized in silicagel was compared with that of the conventional TiO₂ Degussa P25 catalyst. For this purpose, the degradation of indigo carmin (IC) dye was used as model molecule in the tests. The effect of operational parameters such as catalyst loading and dye concentration on the photocatalytic degradation of the model dye was investigated. The rate of degradation increased with increasing catalyst loading, and when the concentration of the dye decreases.     

Titanium dioxide photocatalysis for pharmaceutical wastewater treatment

Heterogeneous photocatalysis using the semiconductor titanium dioxide (TiO₂) has proven to be a promising treatment technology for water purification. The effectiveness of this oxidation technology for the destruction of pharmaceuticals has also been demonstrated in numerous studies. This review highlights recent research on TiO₂ photocatalytic treatment applied to the removal of selected pharmaceuticals. The discussions are tailored based on the therapeutic drug classes as the kinetics and mechanistic aspects are compound dependent. These classes of pharmaceuticals were chosen because of their environmental prevalence and potential adverse effects. Optimal operational conditions and degradation pathways vary with different pharmaceutical compounds. The main conclusion is that the use of TiO₂ photocatalysis can be considered a state-of-the-art pharmaceutical wastewater treatment methodology. Further studies are, however, required to optimize the operating conditions for maximum degradation of multiple pharmaceuticals in wastewater under realistic conditions and on an industrial scale.     

Ag–TiO2 doped photo catalytic degradation of Procion blue H-B dye in textile washwater

The photocatalytic degradation of Procion blue H-B dye in biodegraded textile washwater has been investigated for the complete removal of color and maximum reduction of chemical oxygen demand (COD). Pseudomonas putida was utilized for obtaining biodegraded textile washwater. In this process, silver-doped TiO₂ photocatalyst was prepared and experiments were carried out to study the effects of UV and mercury lamp irradiations on COD reduction and removal of color. The thus prepared silver-doped TiO₂ catalyst was characterized by thermogravimetric and differential thermal analysis, UV-visible spectrometer, X-ray diffraction, scanning electron microscope, energy dispersive X-ray microanalysis, and BET surface area techniques. Adsorption studies were also carried out to evaluate the fitness of isotherm models. The results show that the silver-doped TiO₂ has enhanced the photodegradation of Procion blue H-B dye under UV and mercury lamp irradiations. The enhanced activity of silver-doped TiO₂ is due to the enrichment of electron–hole separation by electron trapping of silver particles.     

Removal of methylene blue by coupling black carbon adsorption with TiO2 photodegradation

In this study, the removal of methylene blue (MB) by the coupling of black carbon (BC) and TiO₂ was investigated. The effects of different parameters such as catalyst dose, sorbent, initial concentrations of dye, pH of the solutions, recycles on discoloration, and chemical oxidation demand (COD) reduction of MB were monitored to optimize the reaction conditions. The discoloration and COD conversation rate of MB obtained by the coupling process were 100% after 90?min irradiation. The synergistic effect of MB-adsorption on BC followed by degradation through TiO₂ photocatalysis was proved by FT–IR spectrophotometer. The BC as by-product of natural materials is a promising adsorbent for waste water treatment.     

Photocatalytic degradation of the diuron pesticide

The occurrence of chlorinated pesticides in wellwaters is a major problem of public health in Ivory Coast and other African countries. Here, we studied the photocatalytic degradation of the pesticide diuron in aqueous solution in presence of two commercial TiO₂ catalysts, P25 and PC500. The capacity of diuron adsorption at the TiO₂ surface is lower for both photocatalysts. The efficiency of photocatalytic degradation of diuron, it is higher using P25 Degussa than PC500 Millenium TiO₂ catalyst.     

Investigation of the effects of humic acid and H<Subscript>2</Subscript>O<Subscript>2</Subscript> on the photocatalytic degradation of atrazine assisted by microwave

A solution of atrazine in a TiO₂ suspension, an endocrine disruptor in natural water, was tentatively treated by microwave-assisted photocatalytic technique. The effects of mannitol, oxygen, humic acid, and hydrogen dioxide on the photodegradation rate were explored. The results could be deduced as follows: the photocatalytic degradation of atrazine fits the pseudo-first-order kinetic well with k = 0.0328 s^?1, and ·OH was identified as the dominant reactant. Photodegradation of atrazine was hindered in the presence of humic acid, and the retardation effect increased as the concentration of humic acid increased. H₂O₂ displayed a significant negative influence on atrazine photocatalysis efficiency. Based on intermediates identified with gas chromatography-mass spectrometry (GC-MS) and Liquid chromatography-mass spectrometry (LC-MS/MS) techniques, the main degradation routes of atrazine are proposed.     

Solar photocatalytic decomposition of two azo dyes on multi-walled carbon nanotubes (MWCNTs)/TiO<Subscript>2</Subscript> composites

Multi-walled carbon nanotubes (MWCNTs)/TiO₂ composite photocatalysts with high photoactivity were prepared by sol-gel process and further characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), and UV-vis absorption spectra. Compared to pure TiO₂, the combination of MWCNTs with titania could cause a significant absorption shift toward the visible region. The photocatalytic performances of the MWCNTs/TiO₂ composite catalysts were evaluated for the decomposition of Reactive light yellow K-6G (K-6G) and Mordant black 7 (MB 7) azo dyes solution under solar light irradiation. The results showed that the addition of MWCNTs enhanced the adsorption and photocatalytic activity of TiO₂ for the degradation of azo dyes K-6G and MB 7. The effect of MWCNTs content, catalyst dosage, pH, and initial dye concentration were examined as operational parameters. The kinetics of photocatalytic degradation of two dyes was found to follow a pseudo-first-order rate law. The photocatalyst was used for seven cycles with photocatalytic degradation efficiency still higher than 98%. A plausible mechanism is also proposed and discussed on the basis of experimental results.     

Sonocatalytic degradation of tetracycline antibiotic in aqueous solution by sonocatalysis

Tetracycline (TC), one of the most common antibiotics, is often poorly bio-degraded in conventional wastewater treatment plants. In this study, the sonocatalytic degradation of TC was investigated using TiO₂ nano-particles as catalyst. The effect of pH, initial TC concentrations, reaction times, and H₂O₂ concentrations were evaluated. The efficacy of ultrasonic irradiation alone in the removal of this pollutant was negligible but removal efficiency increased upon addition of TiO₂ up to 250 mg L^?1; increase of pH and initial TC concentration attenuated TC degradation. Addition of H₂O₂ raised the removal efficiency so that complete removal of TC was achieved within 75 min.     

Rapid photocatalytic degradation of the recalcitrant dye amaranth by highly active N-WO<Subscript>3</Subscript>

Dye wastewater is a major source of toxic aromatic amines released into the environment. Semiconductor photocatalysis is a clean, solar-driven process for the treatment of dye wastewater. To enhance applicability of semiconductor photocatalysis, the catalyst used should be visible light active. Here we report a facile synthesis of a highly visible-light-active nitrogen-doped tungsten oxide, N-WO₃, by thermal decomposition of peroxotungstic acid–urea complex. The structure and properties of N-WO₃ are characterized by X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy. The photodegradation of amaranth catalyzed by N-WO₃ is evaluated in a batch system under visible and ultraviolet A (UVA) light. Our results show successful doping of N in both interstitial and substitutional sites and the presence of N₂-like species. The N doping surprisingly expands the usable portion of the solar spectrum up to the near-infrared region and enhances the photocatalytic activity. At typical experimental conditions such as 25 mg/L of amaranth, 1 g/L of N-WO₃, and pH 7, 100 % degradation of amaranth is achieved within 2 h under both visible and UVA light. The photocatalytic activity of N-WO₃ is maintained in repeated cycles, indicating its exceptional photostability. To the best of our knowledge, this is the first time that a reusable, highly visible-light-active N-WO₃ can be obtained through thermal decomposition of peroxotungstic acid–urea complex.     

Degradation and reduction of acute toxicity of environmentally persistent perfluorooctanoic acid (PFOA) using VUV photolysis and TiO2 photocatalysis in acidic and basic aqueous solutions

Degradation and toxicity reduction of perfluorooctanoic acid (PFOA) were investigated using TiO₂ adsorption, vacuum ultraviolet (VUV) photolysis, and VUV/TiO₂ photocatalysis in acidic and basic aqueous solutions. Chemical analyses of PFOA and its selected by-products and an acute toxicity assessment using the luminescent bacteria Vibrio fischeri (Microtox®) were conducted during and after the various treatment methods. PFOA was found to be best treated by VUV/TiO₂ at pH 4 with HClO₄, as illustrated by the almost complete degradation of PFOA within 360?min and rapid removal of acute microbial toxicity within 60?min. This difference in the efficiency may be attributed to the strong oxidation effectiveness of the radical species generated in acidic media and the electron scavenger effect of the addition of HClO₄ in VUV/TiO₂ photocatalysis. In addition, the proposed method could effectively decompose other perfluorocarboxylic acid (PFCA) species (C₃–C₇ perfluoroalkyl groups) if the initial intermediates formed were longer-chain species that degraded stepwise into shorter-chain compounds by VUV photolysis and VUV/TiO₂ photocatalysis in acidic and basic aqueous solutions.     

Photocatalytic mineralization of a water pollutant,Sunset Yellow dye by an advanced oxidation process using a modified catalyst

ZnS-loaded TiO₂ (ZnS–TiO₂) was synthesized by a sol–gel method. The catalyst was characterized by using different techniques (XRD, HR-SEM, EDS, DRS, PL, XPS, and BET methods). The photocatalytic activity of ZnS–TiO₂ was investigated for the degradation of Sunset Yellow FCF (SY) dye in an aqueous solution using ultraviolet light. ZnS–TiO₂ is found to be more efficient than prepared TiO₂, TiO₂–P25, TiO₂ (Merck), and ZnS at pH 7 for the mineralization of SY. The effects of operational parameters such as the amount of photocatalyst, dye concentration, and initial pH on photo mineralization of SY have been analyzed. The mineralization of SY has been confirmed by chemical oxygen demand measurements. The catalyst is found to be reusable.     

Photocatalytic oxidation of humic substances with TiO<Subscript>2</Subscript>-coated glass micro-spheres

The photocatalytic oxidation of humic substances in aqueous solutions and natural waters with TiO₂ attached to buoyant, hollow glass micro-spheres was studied. A maximum oxidation efficiency of 3.6 mg W^–1 h^–1 was achieved in neutral or alkaline media at a plane surface concentration of the catalyst attached to the micro-spheres of 25 g m^–2. Proceeding by different mechanisms in acidic and alkaline media, the photocatalytic oxidation efficiency did not benefit from an excessive presence of hydroxyl radical promoters, hydrogen peroxide and alkali.     

Structural effect on photocatalytic degradation of metallised azo dyes in aqueous TiO2 suspension

Three metallised azo dyes were investigated under TiO₂‐photocatalytic and photosensitised conditions in aqueous buffering solutions. The degradation follows apparent first‐order kinetics. The size and strength of intramolecular conjugation determine the light‐fastness of the investigated dyes. Compared with ¹O₂ produced in photosensitised process, the more powerful *OH radicals in TiCO₂ photocatalytic process are highly reactive towards the investigated azo dyes. And as a result, the TiO₂‐photocatalysis makes little less distinction in the degradation kinetic data of the azo dyes compared with the photosensitised degradation of them.     

Thermal treatment of plasma-synthesized goethite improves Fenton-like degradation of orange II dye

Various iron oxides are used for Fenton reactions to degrade organic pollutants. The degradation efficiency may be improved by transforming an iron oxide phase to another. Here, we report on the transformation of goethite into hematite by thermal treatment at 400 °C. The products were analyzed by X-ray diffractometry, Raman spectroscopy, scanning electron microscopy and N₂-physisorption. The catalytic activities were measured for orange II bleaching at initial concentration of 25 mg L^?1, pH 3, catalyst concentration of 0.2 g L^?1; 5 mM H₂O₂, 30 °C. Results show that the synthesized goethite was successfully transformed into hematite, and the specific surface area of the material increased from 134 to 163 m² g^?1. The bleaching efficiency of the orange II dye reached 100 % for the hematite product, versus 78 % for goethite. Therefore, a moderate thermal treatment of a plasma-synthesized goethite improves the catalytic oxidation of organic pollutants.     

Studies on catalytic reduction of nitrate in groundwater

Catalytic reduction of nitrate in groundwater by sodium formate over the catalyst was investigated. Pd-Cu/γ-Al₂O₃ catalyst was prepared by impregnation and characterized by brunauer-emmett-teller (BET), inductive coupled plasma (ICP), X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy dispersive X-ray (EDX). It was found that total nitrogen was effectively removed from the nitrate solution (100 mg/L) and the removal efficiency was 87%. The catalytic activity was affected by pH, catalyst amount used, concentration of sodium formate, and initial concentration of nitrate. As sodium formate was used as reductant, precise control in the initial pH was needed. Excessively high or low initial pH (7.0 or 3.0) reduced catalytic activity. At initial pH of 4.5, catalytic activity was enhanced by reducing the amount of catalyst, while concentrations of sodium formate increased with a considerable decrease in N₂ selectivity. In which case, catalytic reduction followed the first order kinetics.     

Solar photocatalytic degradation of the herbicide isoproturon on a Bi–TiO2/zeolite photocatalyst

The photocatalytic degradation of the herbicide isoproturon under solar light was investigated in aqueous solution containing a Bi–TiO₂/zeolite photocatalyst. The catalysts were characterized using X-ray diffraction, UV-Vis diffuse reflectance spectroscopy, Fourier transform-infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. The effect of Bi–TiO₂ loading onto the zeolite support and influence of the parameters such as catalyst amount, pH, and initial concentration of isoproturon on the degradation rate were evaluated. The recycling ability of the catalyst was found to be sustainable for elongated periods. The high activity of the Bi–TiO₂/zeolite was attributed to its absorptivity of visible light and its high adsorption capacity for the pollutant molecules.     

Fabrication and photocatalytic ability of an Au/TiO<Subscript>2</Subscript>/reduced graphene oxide nanocomposite

A new type of Au/TiO₂/reduced graphene oxide (RGO) nanocomposite was fabricated by the hydrothermal synthesis of TiO₂ on graphene oxide followed by the photodeposition of Au nanoparticles. Transmission electron microscopy images showed that Au nanoparticles were loaded onto the surface of both TiO₂ and RGO. Au/TiO₂/RGO had a better photocatalytic activity than Au/ TiO₂ for the degradation of phenol. Electrochemical measurements indicated that Au/TiO₂/RGO had an improved charge transfer capability. Meanwhile, chemiluminescent analysis and electron spin resonance spectroscopy revealed that Au/TiO₂/RGO displayed high production of hydrogen peroxide and hydroxyl radicals in the photocatalytic process. This high photocatalytic performance was achieved via the addition of RGO in Au/TiO₂/RGO, where RGO served not only as a catalyst support to provide more sites for the deposition of Au nanoparticles but also as a collector to accept electrons from TiO₂ to effectively reduce photogenerated charge recombination.

Open image in new window

     

Photocatalytic inactivation of cyanobacteria with ZnO/gamma-AIO23 composite under solar light

Cyanobacteria were inactivated by using zinc oxide (ZnO)coated on the surface of gamma-AI2O3 as a photocatalyst and combining with sunlight. In vitro experiments indicate that axenic cultures of planktonic cyanobacteria lost their photosynthetic activity after photocatalyzed with sunlight exposure exceeding 24 hr. As for Oscillatoria tenuisa, nearly 92% of the cells lost their photosynthetic activity and the cell morphology was severely damaged during 24 hr of the reaction. However, in the case of Microcystis aeruginosa, lower photocatalytic inactivity efficiency was observed, which was attributed to extracellular polymeric secretions (EPSs) surrounding the cells. With a high dosage ZnO catalyst, the dissolved organic carbon (DOC) concentration of the Oscillatoria tenuisa suspension was increased by up to about 190% during photocatalysis. The increased suspension of DOC was attributed to increase liberation of extracellular organic and cell-wall polysaccharides during photocatalysis.     

Degradation of azo dye reactive violet 5 by TiO2 photocatalysis

The photocatalytic degradation of hydrolyzed reactive violet 5 (RV5) using titanium dioxide (TiO₂) was investigated in this study. The effects of various factors including the amount of photocatalyst, RV5 concentration, light intensity, and pH on photocatalytic degradation were evaluated. The photodegradation efficiency was 90% after 20 min of irradiation and reached nearly 100% after 80 min under the condition of pH 4 and temperature of 25°C. The decolorization rate typically followed first-order reaction, and increased markedly with increasing amount of photocatalyst, pH as well as light intensity. The total mineralization, based on total organic carbon (TOC) concentration was 53% after 20 min of UV light exposure and approached nearly 100% after 140 min. The final mineralization product was formylformamide. The photodegradation was faster than the mineralization, indicating that the intermediate products of decolorization were resistant to photodegradation. In this study, we found that toxicity of RV5 significantly decreased after decolorization. Our study suggests that the photocatalytic degradation treatment of RV5 with TiO₂ in wastewater is a simple and fast method.