Schnelle vor-ort-analytik zur untersuchung von rüstungsaltlasten

Field screening methods for the analysis of explosives (for which commercial test kits are generally available) are reviewed. These techniques include immunoassays, photometric methods, bio and chemical sensors as well as thin layer chromatography. Basic aspects of these techniques are discussed, their validation is presented and their application to water and soil samples from hazardous ammunition waste is described. An evaluation of field studies with commercial test kits demonstrates that these techniques can be applied successfully for both the exploration of suspected contaminated sites and their sanitation. These methods are used on-site. In general, they allow short analysis times and a high sample throughput, thus leading to a significant reduction of the number of samples to be analysed in the laboratory and the costs.     

Implementation of food frequency questionnaire for the assessment of total dietary arsenic intake in Bangladesh: Part B, preliminary findings

Dietary intake of water and food has been identified as one of the major pathways for arsenic (As) exposure in the rural population of Bangladesh. Therefore, realistic assessment and measurement of dietary intake patterns are important for the development of an accurate estimate of As exposure and human health risk assessment. One important consideration is to identify an appropriate tool for measuring dietary intake. In this study an interviewer-administered Food Frequency Questionnaire (FFQ) was implemented to determine age and gender specific dietary intake. The developed FFQ was unique because it developed a synergy between field dietary assessment and As concentration measurements in various environmental media. The resulting integrated database provided an accurate framework for the process of As exposure and human health risk assessment. The preliminary results reported here from the FFQ demonstrated that this technique could be used in rural areas as a tool to assess As exposure and the associated human health risk.     

Full scale amendment of a contaminated wood impregnation site with iron water treatment residues

Iron water treatment residues are a free by-product with high concentration of iron oxides Iron water treatment residues has a large potential for arsenic sorption Soils are highly contaminated by arsenic at wood preservation sites Iron water treatment residues were added to hot spots contaminated with arsenic The addition led to significant decrease in leaching of arsenic from the contaminated soil Iron water treatment residues (Fe-WTR) are a free by-product of the treatment of drinking water with high concentration of iron oxides and potential for arsenic sorption. This paper aims at applying Fe-WTR to a contaminated site, measuring the reduction in contaminant leaching, and discussing the design of delivery and mixing strategy for soil stabilization at field scale and present a cost-effective method of soil mixing by common contractor machinery. Soil contaminated by As, Cr, and Cu at an abandoned wood impregnation site was amended with 0.22% (dw) Fe-WTR. To evaluate the full scale amendment a 100 m² test site and a control site (without amendment) were monitored for 14 months. Also soil analysis of Fe to evaluate the degree of soil and Fe-WTR mixing was done. Stabilization with Fe-WTR had a significant effect on leachable contaminants, reducing pore water As by 93%, Cu by 91% and Cr by 95% in the upper samplers. Dosage and mixing of Fe-WTR in the soil proved to be difficult in the deeper part of the field, and pore water concentrations of arsenic was generally higher. Despite water logged conditions no increase in dissolved iron or arsenic was observed in the amended soil. Our field scale amendment of contaminated soil was overall successful in decreasing leaching of As, Cr and Cu. With minor improvements in the mixing and delivery strategy, this stabilization method is suggested for use in cases, where leaching of Cu, Cr and As constitutes a risk for groundwater and freshwater.     

Evaluating the sampling pattern when detecting Zones of Abrupt Change

We present a method for detecting the zones where an irregularly sampled variable changes abruptly in the plane. Such zones are called Zones of Abrupt Change (ZACs). This method not only allows estimation of ZACs, but also testing of their statistical significance against the null hypothesis of a stationary correlated random field. The sampling pattern, in particular its local density, is crucial in the detection of potential ZACs. In this paper, we address the problem of evaluating the sampling pattern by assessing the power of the local test used for detecting ZACs. It is shown that mapping the power allows us to identify zones where ZACs may or may not be detected. The methodology is applied to a soil data set sampled at eight different dates in an agricultural field. Detecting ZACs for the soil water content allowed us to identify permanent structures in the agricultural field related to the boundaries between different soil types. Mapping the power for various sampling densities proved to be useful to determine the minimal sampling density necessary for detecting ZACs.

A proposed methodology for assessing the quality of wildlife habitat

Measurement of the quality and quantity of wildlife habitat is a necessity in planning and analyzing water resource projects. A methodology that provides a means of examining the following major components of habitat quality is proposed: (1) the quantity of land uses, (2) the degree of interspersion of land use, aand (3) the stage of land management and vegetative types. The model can be calibrated to a specific region by experienced wildlife biologists and applied by field technicians using aerial photographs and field evaluation of randomly located points. Biologists familiar with a region develop transformation curves relating variables that represent the above three major components to standardizing factors that range from 0 to 1; these transformation curves reflect the sensitivity of wildlife populations to determinants of habitat quality. The methodology also provides the means for biologists to weigh each components as to its relative importance to the wildlife group or species. A weighted geometric mean of the components provides an indication of the overall quality of the habitat. Changes in the habitat components that may occur because of alternative project actions can be used to evaluate the effectiveness of the alternatives. The change in the index of habitat quality will indicate the need for mitigation in water resource projects. The system then can be used to identify areas for mitigation and the effects of mitigating measures.     

Climatic and Biotic Stochasticity: Disparate Causes of Convergent Demographies in Rare, Sympatric Plants

Abstract:  Species with known demographies may be used as proxies, or approximate models, to predict vital rates and ecological properties of target species that either have not been studied or are species for which data may be difficult to obtain. These extrapolations assume that model and target species with similar properties respond in the same ways to the same ecological factors, that they have similar population dynamics, and that the similarity of vital rates reflects analogous responses to the same factors. I used two rare, sympatric annual plants (sand gilia [ Gilia tenuiflora arenaria ] and Monterey spineflower [ Chorizanthe pungens pungens ]) to test these assumptions experimentally. The vital rates of these species are similar and strongly correlated with rainfall, and I added water and/or prevented herbivore access to experimental plots. Their survival and reproduction were driven by different, largely stochastic factors and processes: sand gilia by herbivory and Monterey spineflower by rainfall. Because the causal agents and processes generating similar demographic patterns were species specific, these results demonstrate, both theoretically and empirically, that it is critical to identify the ecological processes generating observed effects and that experimental manipulations are usually needed to determine causal mechanisms. Without such evidence to identify mechanisms, extrapolations among species may lead to counterproductive management and conservation practices.     

Persistent Unequal Sex Ratio in a Population of Grayling (Salmonidae) and Possible Role of Temperature Increase

In some fishes, water chemistry or temperature affects sex determination or creates sex‐specific selection pressures. The resulting population sex ratios are hard to predict from laboratory studies if the environmental triggers interact with other factors, whereas in field studies, singular observations of unusual sex ratios may be particularly prone to selective reporting. Long‐term monitoring largely avoids these problems. We studied a population of grayling (Thymallus thymallus) in Lake Thun, Switzerland, that has been monitored since 1948. Samples of spawning fish have been caught about 3 times/week around spawning season, and water temperature at the spawning site has been continuously recorded since 1970. We used scale samples collected in different years to determine the average age of spawners (for life‐stage specific analyses) and to identify the cohort born in 2003 (an extraordinarily warm year). Recent tissue samples were genotyped on microsatellite markers to test for genetic bottlenecks in the past and to estimate the genetically effective population size (N_e). Operational sex ratios changed from approximately 65% males before 1993 to approximately 85% males from 1993 to 2011. Sex ratios correlated with the water temperatures the fish experienced in their first year of life. Sex ratios were best explained by the average temperature juvenile fish experienced during their first summer. Grayling abundance is declining, but we found no evidence of a strong genetic bottleneck that would explain the apparent lack of evolutionary response to the unequal sex ratio. Results of other studies show no evidence of endocrine disruptors in the study area. Our findings suggest temperature affects population sex ratio and thereby contributes to population decline. Persistencia de Proporción de Sexos Desigual en una Población de Tímalos (Salmonidae) y el Posible Papel del Incremento de la Temperatura     

Applying chemical sedimentation process in drinking water treatment plant to address the emergent arsenic spills in water sources

Arsenic (As) spills occurred more frequently and sometimes polluted water sources in recent years in China. It is as urgent need to develop emergency treatment technologies to address the arsenic threat for large-scale water treatment plants. In response, we developed a chemical sedimentation technology to remove arsenic contaminants for water treatment plants. Bench-scale experiments were conducted to investigate the efficiency of arsenic removal and the influencing factors of the chemical sedimentation treatment process. The influencing factors included the choice and dosage of coagulants, the valence of arsenic and pH value of solution. The As(V) contaminants can be almost completely removed by ferric or alum coagulants. The As(III) contaminants are more recalcitrant to chemical sedimentation, 75% for ferric coagulant and 40% for alum coagulant. The quantitative results of arsenic removal load by different ferric or alum coagulants were presented to help determine the parameters for arsenic treatment technology. The dominant mechanism for arsenic removal is static combination, or adsorption of negative arsenic species onto positive ferric hydroxide or alum hydroxide flocs. The efficiency of this treatment technology has also been demonstrated by a real production test in one water treatment plant with arsenic-rich source water and one emergency response. This technology was verified to be quick to set-up, easy to operate and highly efficient even for high concentration of arsenic.     

Arsenic contamination in groundwater in the Southeast Asia region

The adverse impact of groundwater contaminated with arsenic (As) on humans has been reported worldwide, particularly in Asian countries. In this study, we present an overview of the As crisis in the Southeast Asian region where groundwater is contaminated with naturally occurring As and where contamination has become more widespread in recent years. In this region more than 100 million people are estimated to be at risk from groundwater As contamination, and some 700,000 people are known so far to have been affected by As-related diseases. Despite investments exceeding many millions of dollars, there are still substantial knowledge gaps about the prevalence and impact of As, notably in its epidemiology, temporal variations, social factors, patient identification, treatment, etc. Arsenic-affected people in the affected regions also face serious social problems. Of major concern is the fact that many researchers from different countries have been conducting research in SE Asia region but with a lack of coordination, thus duplicating their work. There is an urgent need to coordinate these various studies to ensure better delivery of research outcomes. Further research is needed to improve field testing and monitoring of drinking water sources, and to develop new treatments for chronic As toxicity and new sources of safe drinking water.     

饮用水遗传毒性测试中TA98和TA100的敏感度和可靠度比较

为了寻找适合我国水质特征的Ames试验简化方法,作者通过广泛的文献调研,对近30年以来,我国研究者用Ames试验评价饮用水和水源水的遗传毒性的实验数据进行了总结和分析。结果发现,TA98-S9测试体系的敏感度和可靠度最高,TA98+S9次之,TA100-S9与TA100+S9 2个测试体系对Ames试验结果的影响几乎可以忽略。只用1个TA98-S9测试体系的方法 1,仅用25%的工作量,可获得91%的致突变阳性检出率和74%的有效数据率;采用TA98-S9和TA98+S9 2个测试体系的方法 2,使用50%的工作量,可获得96%的阳性检出率和96%的有效数据率。据此,作者建议:采用Ames试验评价我国饮用水和水源水的遗传毒性时,可以将通常采用的4个测试体系的方法 4,简化为只采用TA98-S9与TA98+S9 2个测试体系的方法 2。在仅进行致突变性定性评价时,或者在费用或水样量不足等条件下,则可使用更为简化的方法 1,更利于Ames试验的广泛应用。     

Chronic kidney disease in two coastal districts of Andhra Pradesh, India: role of drinking water

Chronic kidney disease (CKD) has been reported in a few coastal regions of Srikakulam district and Chimakurthy mandal (~30–40 km away from the coast) in the Prakasham district of Andhra Pradesh, India. Some medical experts and the local population have apprehensions that the drinking water is the sole reason for this disease in these areas. As the source of drinking water for these two regions is only groundwater, major ions and trace elements were measured on waters from different sources to identify the causative element(s), if any. Comparison of hydrochemical data of both the areas indicates that groundwater in Srikakulam coastal region is less mineralized than that of the Prakasham region, which may be due to geological, hydrological and climatic reasons. However, the concentrations of various inorganic chemicals are within the permissible limits of drinking water. Hence, for the inorganic chemicals to cause ill health, including CKD, is unlikely or is ruled out in the study areas.     

An effective dietary survey framework for the assessment of total dietary arsenic intake in Bangladesh: Part-A—FFQ design

Groundwater contaminated with arsenic (As), when extensively used for irrigation, causes potentially long term detrimental effects to the landscape. Such contamination can also directly affect human health when irrigated crops are primarily used for human consumption. Therefore, a large number of humans are potentially at risk worldwide due to daily As exposure. Numerous previous studies have been severely limited by small sample sizes which are not reliably extrapolated to large populations or landscapes. Human As exposure and risk assessment are no longer simple assessments limited to a few food samples from a small area. The focus of more recent studies has been to perform risk assessment at the landscape level involving the use of biomarkers to identify and quantify appropriate health problems and large surveys of human dietary patterns, supported by analytical testing of food, to quantify exposure. This approach generates large amounts of data from a wide variety of sources and geographic information system (GIS) techniques have been used widely to integrate the various spatial, demographic, social, field, and laboratory measured datasets. With the current worldwide shift in emphasis from qualitative to quantitative risk assessment, it is likely that future research efforts will be directed towards the integration of GIS, statistics, chemistry, and other dynamic models within a common platform to quantify human health risk at the landscape level. In this paper we review the present and likely future trends of human As exposure and GIS application in risk assessment at the landscape level.     

Sorption and bioavailability of arsenic in selected Bangladesh soils

The bioavailability of arsenic (As) in the soil environment is largely governed by its adsorption–desorption reactions with soil constituents. We have investigated the sorption–desorption behaviour of As in four typical Bangladeshi soils subjected to irrigation with As-contaminated groundwater. The total As content of soils (160 samples) from the Laksham district ranged from <0.03 to approximately 43 mg kg⁻¹. Despite the low total soil As content, the concentration of As in the pore water of soils freshly irrigated with As-contaminated groundwater ranged from 0.01 to 0.1 mg l⁻¹. However, when these soils were allowed to dry, the concentration of As released in the pore water decreased to undetectable levels. Remoistening of soils to field moisture over a 10-day period resulted in a significant (up to 0.06 mg l⁻¹) release of As in the pore water of soils containing >10 mg As kg⁻¹ soil, indicating the potential availability of As. In soils containing <5 mg As kg⁻¹, As was not detected in the pore water. A comparison of Bangladeshi soils with strongly weathered long-term As-contaminated soils from Queensland, Australia showed a much greater release of As in water extracts from the Australian soils. However, this was attributed to the much higher loading of As in these Australian soils. The correlation of pore water As with other inorganic ions (P, S) showed a strongly significant (P < 0.001) relationship with P, although there was no significant relationship between As and other inorganic cations, such as Fe and Mn. Batch sorption studies showed an appreciable capacity for both As^V and As^III sorption, with As^V being retained in much greater concentrations than As^III.     

Introduced and cryptogenic species in Port Phillip Bay, Victoria, Australia

Port Phillip Bay (PPB) is a large (1,930 km²), temperate embayment in southern Victoria, Australia. Extensive bay-wide surveys of PPB have occurred since 1840. In 1995/1996 the Commonwealth Scientific and Industrial Research Organization (CSIRO) Centre for Research on Introduced Marine Pests (CRIMP) undertook an intensive evaluation of the region with the aims of developing a comprehensive species list of native and introduced biota and contrasting previous bay-wide assessments with a current field survey in order to detect new incursions and discern alterations to native communities. Two methods were used to meet these aims: a re-evaluation of regional museum collections and published research in PPB to identify and determine the timing of introductions; and field surveys for benthic (infauna, epifauna and encrusting) organisms between September 1995 to March 1996. One hundred and sixty introduced (99) and cryptogenic (61) species were identified representing over 13% of the recorded species of PPB. As expected, the majority of these are concentrated around the shipping ports of Geelong and Melbourne. Invasions within PPB appear to be increasing, possibly due to an increase in modern shipping traffic and an increase in aquaculture (historically associated with incidental introductions); however the records of extensive biological surveys suggest that this may, in part, be an artefact of sampling effort. In contrast to Northern Hemisphere studies, PPB (and Southern Hemisphere introductions in general) have significantly different suites of successfully invading taxa. PPB is presented as one of the most invaded marine ecosystems in the Southern Hemisphere.Communicated by M.S. Johnson, Crawley     

An ecotoxicological view on neurotoxicity assessment

The numbers of potential neurotoxicants in the environment are raising and pose a great risk for humans and the environment. Currently neurotoxicity assessment is mostly performed to predict and prevent harm to human populations. Despite all the efforts invested in the last years in developing novel in vitro or in silico test systems, in vivo tests with rodents are still the only accepted test for neurotoxicity risk assessment in Europe. Despite an increasing number of reports of species showing altered behaviour, neurotoxicity assessment for species in the environment is not required and therefore mostly not performed. Considering the increasing numbers of environmental contaminants with potential neurotoxic potential, eco-neurotoxicity should be also considered in risk assessment. In order to do so novel test systems are needed that can cope with species differences within ecosystems. In the field, online-biomonitoring systems using behavioural information could be used to detect neurotoxic effects and effect-directed analyses could be applied to identify the neurotoxicants causing the effect. Additionally, toxic pressure calculations in combination with mixture modelling could use environmental chemical monitoring data to predict adverse effects and prioritize pollutants for laboratory testing. Cheminformatics based on computational toxicological data from in vitro and in vivo studies could help to identify potential neurotoxicants. An array of in vitro assays covering different modes of action could be applied to screen compounds for neurotoxicity. The selection of in vitro assays could be guided by AOPs relevant for eco-neurotoxicity. In order to be able to perform risk assessment for eco-neurotoxicity, methods need to focus on the most sensitive species in an ecosystem. A test battery using species from different trophic levels might be the best approach. To implement eco-neurotoxicity assessment into European risk assessment, cheminformatics and in vitro screening tests could be used as first approach to identify eco-neurotoxic pollutants. In a second step, a small species test battery could be applied to assess the risks of ecosystems.     

Bakterielle Biotestverfahren zur Bestimmung der Toxizität von Abfällen

For a risk assessment of wastes, fast and sensitive screening methods are required to detect possible toxic effects. In this study, different leachability methods (DIN 38414, part 4; EPA 1310; EPA 1320) were used to prepare aqueous leachates from different wastes; these leachates were rested in different bacterial toxicity test systems for possible toxic effects. As bacterial toxicity tests, the luminescent bacteria test and the growth inhibition test with activated sludge bacteria were used. The test systems showed a good agreement of the results from the different leaching methods, thereby indicating the reliability of the test systems used. The luminescent bacteria inhibition test showed a higher sensitivity than the growth inhibition test which is in good accordance with literature data. We conclude that both test systems are well suited to assess the toxic potential of aqueous waste leachates.     

利用SOS/umu测试方法鉴定沙颍河河水中的遗传毒性物质

采用HPLC分割导向的SOS/umu测试方法鉴定了沙颍河河水中的遗传毒性物质。当采用TA1535/pSK1002菌株测定HPLC分割的各馏分时,如果不经大鼠肝微粒体酶(S9)代谢活化,只有馏分F10显示遗传毒性,加入大鼠肝微粒体酶代谢活化后,馏分F10和馏分F15都显示有遗传毒性,说明河水中存在某些需经过大鼠肝微粒体酶代谢活化才能显示出遗传毒性的物质。当采用过量表达O-乙酰转移酶(O-AT),对芳香胺类物质和硝基芳烃化合物有特殊响应的NM2009菌株测定时,馏分F8、F9和F10均呈现遗传毒性;特别是对于馏分F10,用NM2009菌株测定的遗传毒性远高于原始菌,说明这3个馏分中都含有芳香胺类或硝基芳烃类物质。     

Prediction of germination rates of weed species: Relationships between germination speed parameters and species traits

In fields, the timing of weed emergence flushes is mostly related to the timing and rate of seed germination, which depend on seed dormancy level, soil temperature and water potential conditions as well as soil tillage and crop sowing date. Seed germination parameters are essential in weed dynamics models to account for the effects of soil conditions on weed demography. Since these parameters are difficult to measure, our objective was to test the possibility of estimating them from easily accessible information. Seed germination parameters (germination lag-time, time to mid-germination and mid-germination rate) were measured or collected from the literature for 25 weed species with contrasted seed characteristics. Correlations were then searched for between these parameters and morphological, chemical and physiological seed traits as well as seed dormancy level. The dormancy level was positively correlated with speed of germination parameters. Earliness of germination was positively correlated with seed lipid content and the seed area to mass ratio. Germination was also earlier and faster in species with a high base temperature for germination. These relationships explained about half the observed variability in germination speed parameters but should be further tested before being used to predict the germination behaviour of weed species in the field in different seasons.     

Removal of arsenate from water by adsorbents: a comparative case study

Laboratory and field filtration experiments were conducted to study the effectiveness of As(V) removal for five types of adsorbent media. The media included activated alumina (AA), modified activated alumina (MAA), granular ferric hydroxide (GFH), granular ferric oxide (GFO), and granular titanium dioxide (TiO?). In laboratory batch and column experiments, the synthetic challenge water was used to evaluate the effectiveness for five adsorbents. The results of the batch experiments showed that the As(V) adsorption decreased as follows at pH 6.5: TiO? > GFO > GFH > MAA > AA. At pH 8.5, however, As(V) removal decreased in the following order: GFO = TiO? > GFH > MAA > AA. In column experiments, at pH 6.5, the adsorbed As(V) for adsorbents followed the order: TiO? > GFO > GFH, whereas at pH 8.5 the order became: GFO = TiO? > GFH when the challenge water containing 50 μg/L of As(V) was used. Field filtration experiments were carried out in parallel at a wellhead in New Jersey. Before the effluent arsenic concentration increased to 10 μg/L, approximately 58,000 and 41,500 bed volumes of groundwater containing an average of 47 μg/L of As(V) were treated by the filter system packed with GFO and TiO?, respectively. The As(V) adsorption decreased in the following sequence: GFO > TiO? > GFH > MAA > AA. Filtration results demonstrated that GFO and TiO? adsorbents could be used as media in small community filtration systems for As(V) removal.     

Mikrobiologisch-ökotoxikologische Bodenuntersuchungen von zwei im Pflanzenschutz eingesetzten Öl-Präparaten

Goal and Scope

Since many years mineral and plant oils have been applied with relatively high doses to control noxious insects in sevral agricultural and horticultural crops. In addition they have also been used with low doses as adjuvants (additives) together with herbicides to improve their efficacy. Their ecotoxicological effets on soil microorganisms as an important part of the soil fertility, however, have been insufficiently investigated.

Methods

Under laboratory conditions two agricultural soils were treated with a rapeseed oil and a paraffin oil as well as in some cases with biocidal reference compounds (e.g. dinitrophenol herbicides). The applied dosage were related to the concentrations in soil reached after simulated penetration of practical field amounts into upper soil layers. In some cases green manuring was simulated by adding lucerne meal to the soil. During incubation for several weeks biomass-related microbial activities (dehydrogenase activity, substrate-induced short-term respiration) as well as the mineralization of carbon and nitrogen (including nitrification) were measured. In addition some combinations of these activities were investigated.

Results and Conclusion

As compared to ‘normal’ pesticides both oil products differed in their effects on soil microorganisms. Those effects typical for strongly biocidal compounds including plant protection products, namely a dose-related inhibition of microbial biomass and stimulated mineralization (especially of nitrogen) failed with the tested oily compounds. Depending on the high input of organic carbon by these oils and their rapid decomposition a dose-dependent increase of biomass-related parameters and of the carbon mineralization occurred especially with the high doses, whereas the nitrogen mineralization was reduced or even the available nitrate content was nearly eliminated for some time by microbiological immobilization. In comparison with the reference products the two oil preparations caused only little microbiological-ecotoxicological impacts on the soil and even some stimulations of important microbial soil parameters when tested with the extended test system (including the dosages used).

Recommendation and Perspective

As a result of these investigations and of the existing literature we recommend an extension of the test spectrum for those formulated preparations and adjuvants which should be applied at high dosages or if they contain higher amounts of well decomposable organic substances. This is necessary to distinguish dose-related enhanced activities induced by biocidal effects and the subsequent mineralization of this death material (=indirect effects) from ‘real’ stimulations directly produced by the substrate.