A carbon budget of a small humic lake: an example of the importance of lakes for organic matter cycling in boreal catchments

Lakes play an important role in the cycling of organic matter in the boreal landscape, due to the frequently high extent of bacterial respiration and the efficient burial of organic carbon in sediments. Based on a mass balance approach, we calculated a carbon budget for a small humic Swedish lake in the vicinity of a potential final repository for radioactive waste in Sweden, in order to assess its potential impact on the environmental fate of radionuclides associated with organic matter. We found that the lake is a net heterotrophic ecosystem, subsidized by organic carbon inputs from the catchment and from emergent macrophyte production. The largest sink of organic carbon is respiration by aquatic bacteria and subsequent emission of carbon.dioxide to the atmosphere. Although the annual burial of organic carbon in the sediment is a comparatively small sink, it results in the build-up of the largest carbon pool in the lake. Hence, lakes may simultaneously disperse and accumulate organic-associated radionuclides leaking from a final repository.     

Determination of the aerobic biodegradability of polymeric material in a laboratory controlled composting test

A laboratory method is presented for investigating the biodegradation of an organic test material in an aerobic composting system based on the evolution of carbon dioxide. In addition to carbon conversion, biodegradation can also be monitored through weight loss and physical disintegration. The test method is different from other biodegradation tests, especially aquatic tests, because of the elevated temperature representative for real composting conditions and also because of enhanced fungal degradation activities. A ring test was run using paper and poly-β-hydroxybutyrate/valerate as test materials and cellulose powder as a reference material. The test results and the experience gained by the participants showed that the method is suitable and practicable. Experience with real technical-scale composting facilities confirms that the method provides test results of high predictive value. The test is designed to become a European Standard in connection with determining the compostability of packagings and packaging materials.     

An alternative supercritical fluid extraction system for aqueous matrices and its application in pesticides residue analysis

Supercritical fluid extraction (SFE) is a rapid and convenient method for the isolation of organic compounds from environmental samples. This paper describes a supercritical carbon dioxide (CO2) extraction system that uses a newly designed extraction cell to recover organic compounds from an aqueous matrix. Analysis of the extracts by gas chromatography-electron capture detector (GC-ECD) indicated that the herbicide trifluralin (2,6-dinitro-N,N-dipropyl-4-trifluoromethylaniline) could be quantitatively extracted by using the SFE system proposed with small amounts of sample. The percentage of recovery obtained with the SFE system described was twice as high as the result obtained using a conventional solid-phase extraction technique. Extraction by SFE was completed in a short period of time using a simple and low-cost home-made system that did not require the use of organic solvents.     

Experimental investigation of tribological characteristics and emissions with nonedible sunflower oil as a biolubricant

Plant (vegetable) oil has been evaluated as a substitute for mineral oil–based lubricants because of its natural and environmentally friendly characteristics. Availability of vegetable oil makes it a renewable source of bio-oils. Additionally, vegetable oil–based lubricants have shown potential for reducing hydrocarbon and carbon dioxide (CO₂) emissions when utilized in internal combustion (IC) engines and industrial operations. In this study, sunflower oil was investigated to study its lubricant characteristics under different loads using the four-ball tribometer and the exhaust emissions were tested using a four-stroke, single-cylinder diesel engine. All experimental works conformed to American Society for Testing and Materials standard (ASTM D4172-B). Under low loads, sunflower oil showed adequate tribological characteristics (antifriction and antiwear) compared with petroleum oil samples. The results also demonstrated that the sunflower oil–based lubricant was more effective in reducing the emission levels of carbon monoxide (CO), CO₂, and hydrocarbons under different test conditions. Therefore, sunflower oil has the potential to be used as lubricant of mating components.

Implications: An experimental investigation of the characteristics of nonedible sunflower oil tribological behaviors and potential as a renewable source for biofluids alternative to the petroleum oils was carried out. The level of emissions of a four–stroke, single-cylinder diesel engine using sunflower oil as a biolubricant was evaluated.     

Methods of characterizing the distribution of exhaust emissions from light-duty, gasoline-powered motor vehicles in the U.S. fleet

Mobile sources significantly contribute to ambient concentrations of airborne particulate matter (PM). Source apportionment studies for PM10 (PM < or = 10 microm in aerodynamic diameter) and PM2.5 (PM < or = 2.5 microm in aerodynamic diameter) indicate that mobile sources can be responsible for over half of the ambient PM measured in an urban area. Recent source apportionment studies attempted to differentiate between contributions from gasoline and diesel motor vehicle combustion. Several source apportionment studies conducted in the United States suggested that gasoline combustion from mobile sources contributed more to ambient PM than diesel combustion. However, existing emission inventories for the United States indicated that diesels contribute more than gasoline vehicles to ambient PM concentrations. A comprehensive testing program was initiated in the Kansas City metropolitan area to measure PM emissions in the light-duty, gasoline-powered, on-road mobile source fleet to provide data for PM inventory and emissions modeling. The vehicle recruitment design produced a sample that could represent the regional fleet, and by extension, the national fleet. All vehicles were recruited from a stratified sample on the basis of vehicle class (car, truck) and model-year group. The pool of available vehicles was drawn primarily from a sample of vehicle owners designed to represent the selected demographic and geographic characteristics of the Kansas City population. Emissions testing utilized a portable, light-duty chassis dynamometer with vehicles tested using the LA-92 driving cycle, on-board emissions measurement systems, and remote sensing devices. Particulate mass emissions were the focus of the study, with continuous and integrated samples collected. In addition, sample analyses included criteria gases (carbon monoxide, carbon dioxide, nitric oxide/nitrogen dioxide, hydrocarbons), air toxics (speciated volatile organic compounds), and PM constituents (elemental/organic carbon, metals, semi-volatile organic compounds). Results indicated that PM emissions from the in-use fleet varied by up to 3 orders of magnitude, with emissions generally increasing for older model-year vehicles. The study also identified a strong influence of ambient temperature on vehicle PM mass emissions, with rates increasing with decreasing temperatures.     

Determination of the aerobic biodegradability of polymeric material in aquatic batch tests

Results of an international ring-test of two laboratory methods are presented for investigating the biodegradability of organic polymeric test materials in aquatic test systems based on respirometry and the evolution of carbon dioxide. These methods are developed further from the well-known standardized biodegradation tests ISO 9408 (1999) and ISO 9439 (1999), which have been successfully used for many years. The most important improvements are the extension of the test period up to six months, the increase of the buffer capacity and nutrient supply of the inorganic medium, an optimization of the inoculation, and optionally, the possibility of a carbon balance. A ring test, organized by the International Biodeterioration Research Group (IBRG), was run using a poly(,-caprolactone)-starch blend and an aliphatic-aromatic co-polyester as test materials and a microcrystalline cellulose powder as a reference material. The test results and the experience gained by the participants showed that the methods are suitable and practicable. The test methods have been meanwhile established as standards ISO 14851 (1999) and ISO 14852 (1999).     

Photo-oxidation of biodegraded crude oil and toxicity of the photo-oxidized products

We investigated the physicochemical changes resulting from irradiation by sunlight of biodegraded crude oil. An Arabian light crude oil sample was first subjected to microbial degradation. n-Alkanes and aromatic compounds such as naphthalenes, fluorenes, dibenzothiophenes and phenanthrenes possessing short, alkyl side chain(s) were almost completely degraded, while the contents of the saturated and aromatic fractions were reduced by 70% and 40%, respectively. This biodegraded oil was then suspended in seawater and exposed to sunlight irradiation for several weeks. The most remarkable change caused by the irradiation was a substantial decline in the aromatic fraction with a concomitant increase in the resin and asphaltene fractions. A 13C-nuclear magnetic resonance (NMR) spectroscopic analysis showed that the aromaticity of the biodegraded oil was significantly lower in the irradiated sample. A field desorption-mass spectrometric (FD-MS) analysis showed that sunlight irradiation reduced the average molecular weight of the oil components and formed oxygenated compounds. Consistent with this observation is that the oxygen content in the oil increased as the irradiation was prolonged. The bioavailability of the biodegraded oil was increased by the photo-oxidation: the growth of seawater microbes was minimal when the non-irradiated biodegraded oil was used as the source of carbon and energy; however, growth was significant when irradiated biodegraded oil was used. The concentration of dissolved organic carbon (DOC) increased linearly during the sunlight irradiation of the biodegraded oil, and this increase was matched by an increase in ultraviolet-absorptive materials in the seawater. The photochemically formed, water-soluble fraction (WSF) showed acute toxicity against the halophilic crustacean, Artemia.     

An alternative supercritical fluid extraction system for aqueous matrices and its application in pesticides residue analysis

Abstract

Supercritical fluid extraction (SFE) is a rapid and convenient method for the isolation of organic compounds from environmental samples. This paper describes a supercritical carbon dioxide (CO₂) extraction system that uses a newly designed extraction cell to recover organic compounds from an aqueous matrix. Analysis of the extracts by gas chromatography‐electron capture detector (GC‐ECD) indicated that the herbicide trifluralin (2,6‐dinitro‐N,N‐dipropyl‐4‐trifluoromethylaniline) could be quantitatively extracted by using the SFE system proposed with small amounts of sample. The percentage of recovery obtained with the SFE system described was twice as high as the result obtained using a conventional solid‐phase extraction technique. Extraction by SFE was completed in a short period of time using a simple and low‐cost home‐made system that did not require the use of organic solvents.     

Testing the relationship between globalization and carbon dioxide emissions in Pakistan: does environmental Kuznets curve exist?

Over the last few decades, the atmospheric carbon dioxide emission has been amplified to a great extent in Pakistan. This amplification may cause global warming, climate change, and environmental degradation in Pakistan. Consequently, ecological condition and human life may suffer in the near future from these indicated threats. Therefore, an attempt was made to test the relationship between globalization and carbon dioxide emissions in case of Pakistan. The study covers the time series data over the period of 1975–2014. We employed modern econometric techniques such as Johansen co-integration, ARDL bound testing approach, and variance decomposition analysis. Results of the Johansen co-integration test show that there is a significant long-run relationship between carbon dioxide emissions and globalization. The long-run elasticities of the ARDL model show that a 1% increase in economic globalization, political globalization, and social globalization will increase carbon dioxide emissions by 0.38, 0.19, and 0.11%, respectively. Further, our findings reveal that the environmental Kuznets curve (EKC) hypothesis prevails an inverted U-shaped relationship between carbon dioxide emission and economic growth. Therefore, the EKC hypothesis is valid in the presence of globalization. The diagnostic test results show that the parameters of the ARDL model are credible, stable, and reliable in the current form. Finally, variance decomposition analysis displays that economic, political, and social globalization are contributing significantly to carbon dioxide emissions in Pakistan.

     

Analysis and comparison of inertinite-derived adsorbent with conventional adsorbents

To increase U.S. petroleum energy-independence, the University of Texas at Arlington (UT Arlington) has developed a coal liquefaction process that uses a hydrogenated solvent and a proprietary catalyst to convert lignite coal to crude oil. This paper reports on part of the environmental evaluation of the liquefaction process: the evaluation of the solid residual from liquefying the coal, called inertinite, as a potential adsorbent for air and water purification. Inertinite samples derived from Arkansas and Texas lignite coals were used as test samples. In the activated carbon creation process, inertinite samples were heated in a tube furnace (Lindberg, Type 55035, Arlington, UT) at temperatures ranging between 300 and 850 degrees C for time spans of 60, 90, and 120 min, using steam and carbon dioxide as oxidizing gases. Activated inertinite samples were then characterized by ultra-high-purity nitrogen adsorption isotherms at 77 K using a high-speed surface area and pore size analyzer (Quantachrome, Nova 2200e, Kingsville, TX). Surface area and total pore volume were determined using the Brunauer Emmet, and Teller method, for the inertinite samples, as well as for four commercially available activated carbons (gas-phase adsorbents Calgon Fluepac-B and BPL 4 x 6; liquid-phase adsorbents Filtrasorb 200 and Carbsorb 30). In addition, adsorption isotherms were developed for inertinite and the two commercially available gas-phase carbons, using methyl ethyl ketone (MEK) as an example compound. Adsorption capacity was measured gravimetrically with a symmetric vapor sorption analyzer (VTI, Inc., Model SGA-100, Kingsville, TX). Also, liquid-phase adsorption experiments were conducted using methyl orange as an example organic compound. The study showed that using inertinite from coal can be beneficially reused as an adsorbent for air or water pollution control, although its surface area and adsorption capacity are not as high as those for commercially available activated carbons. Implications: The United States currently imports two-thirds of its crude oil, leaving its transportation system especially vulnerable to disruptions in international crude supplies. UT Arlington has developed a liquefaction process that converts coal, abundant in the United States, to crude oil. This work demonstrated that the undissolvable solid coal residual from the liquefaction process, called inertinite, can be converted to an activated carbon adsorbent. Although its surface area and adsorption capacity are not as high as those for commercially available carbons, the inertinite source material would be available at no cost, and its beneficial reuse would avoid the need for disposal.     

A new look at atmospheric carbon dioxide

Carbon dioxide is increasing in the atmosphere and is of considerable concern in global climate change because of its greenhouse gas warming potential. The rate of increase has accelerated since measurements began at Mauna Loa Observatory in 1958 where carbon dioxide increased from less than 1 part per million per year (ppm yr^?1) prior to 1970 to more than 2 ppm yr^?1 in recent years. Here we show that the anthropogenic component (atmospheric value reduced by the pre-industrial value of 280 ppm) of atmospheric carbon dioxide has been increasing exponentially with a doubling time of about 30 years since the beginning of the industrial revolution (～1800). Even during the 1970s, when fossil fuel emissions dropped sharply in response to the “oil crisis” of 1973, the anthropogenic atmospheric carbon dioxide level continued increasing exponentially at Mauna Loa Observatory. Since the growth rate (time derivative) of an exponential has the same characteristic lifetime as the function itself, the carbon dioxide growth rate is also doubling at the same rate. This explains the observation that the linear growth rate of carbon dioxide has more than doubled in the past 40 years. The accelerating growth rate is simply the outcome of exponential growth in carbon dioxide with a nearly constant doubling time of about 30 years (about 2%/yr) and appears to have tracked human population since the pre-industrial era.     

Microbial activities in soils of a former sawmill area

To find out microbial metabolic functioning and toxicity in a former sawmill area, carbon dioxide evolution, methane oxidation potential, 10 hydrolytic enzyme activities, Vibrio fischeri test, fluorescein diacetate hydrolysis activity (FDA), soil pH, carbon, nitrogen and pentachlorophenol (PCP) content were measured at four sites. The area is contaminated with aged chlorophenols. Chlorophenol content of soil was analyzed with a novel HPLC-MS technique, which allowed to measure chlorophenols without derivatization. The sites had a pollution gradient from 0.5 to 15 microg PCP g dw of soil(-1). Endogenous carbon dioxide evolution, methane oxidation potential, butyrate-esterase, acetate-esterase, sulphatase and aminopeptidase activities were lower at the site 2 than 3, although the site 2 and 3 had similar content of carbon and nitrogen. The soil was toxic in V. fischeri test at the site 2, which had high content of PCP (3.93+/-1.00 microg PCP g dw of soil(-1)). The results indicated that endogenous carbon dioxide evolution, methane oxidation potential, butyrate-esterase, acetate-esterase, sulphatase and aminopeptidase activities were sensitive to PCP in the soil. The results indicated that alpha-glucosidase, beta-glucosidase, beta-xylosidase, beta-cellobiosidase, phosphomonoesterase, N-acetyl-glucosaminidase activity and FDA hydrolysis activity were not sensitive to PCP in the soil. Soil processes involved in the cycling of carbon, nitrogen, sulphur and phosphorus were only slightly vulnerable in the former sawmill area and most sensitive microbial species were probably replaced with more tolerant ones to maintain and recover functioning of the former sawmill soils.     

80TH APCA Annual Meeting & Exhibition June 21-26, 1987

To increase U.S. petroleum energy-independence, the University of Texas at Arlington (UT Arlington) has developed a coal liquefaction process that uses a hydrogenated solvent and a proprietary catalyst to convert lignite coal to crude oil. This paper reports on part of the environmental evaluation of the liquefaction process: the evaluation of the solid residual from liquefying the coal, called inertinite, as a potential adsorbent for air and water purification. Inertinite samples derived from Arkansas and Texas lignite coals were used as test samples.

In the activated carbon creation process, inertinite samples were heated in a tube furnace (Lindberg, Type 55035, Arlington, UT) at temperatures ranging between 300 and 850 °C for time spans of 60, 90, and 120 min, using steam and carbon dioxide as oxidizing gases. Activated inertinite samples were then characterized by ultra-high-purity nitrogen adsorption isotherms at 77 K using a high-speed surface area and pore size analyzer (Quantachrome, Nova 2200e, Kingsville, TX). Surface area and total pore volume were determined using the Brunauer, Emmet, and Teller method, for the inertinite samples, as well as for four commercially available activated carbons (gas-phase adsorbents Calgon Fluepac-B and BPL 4?×?6; liquid-phase adsorbents Filtrasorb 200 and Carbsorb 30). In addition, adsorption isotherms were developed for inertinite and the two commercially available gas-phase carbons, using methyl ethyl ketone (MEK) as an example compound. Adsorption capacity was measured gravimetrically with a symmetric vapor sorption analyzer (VTI, Inc., Model SGA-100, Kingsville, TX). Also, liquid-phase adsorption experiments were conducted using methyl orange as an example organic compound. The study showed that using inertinite from coal can be beneficially reused as an adsorbent for air or water pollution control, although its surface area and adsorption capacity are not as high as those for commercially available activated carbons.

Implications: The United States currently imports two-thirds of its crude oil, leaving its transportation system especially vulnerable to disruptions in international crude supplies. UT Arlington has developed a liquefaction process that converts coal, abundant in the United States, to crude oil. This work demonstrated that the undissolvable solid coal residual from the liquefaction process, called inertinite, can be converted to an activated carbon adsorbent. Although its surface area and adsorption capacity are not as high as those for commercially available carbons, the inertinite source material would be available at no cost, and its beneficial reuse would avoid the need for disposal.     

Relationships between fine particulate species,gaseous pollutants and meteorological parameters in detroit

During June, July and August 1981, General Motors Research Laboratories operated a comprehensive air-quality monitoring site in Detroit. Parameters monitored included the criteria pollutants, meteorological variables and the organic carbon, elemental carbon and sulfate content of the fine and coarse fractions of inhalable particulates (diameter ⩽ 15 μm). In addition, air parcel trajectories were used to compute the length of time air parcels spent in various upwind emission-source areas before arriving in Detroit. The data were analyzed using varimax-rotated principal component analysis. The results show that midwestern sources upwind of southeastern (SE) Michigan are responsible for most of the observed sulfate, which accounted for about 50% of the fine particle fraction. Significant amounts of ozone, particulate organic carbon and sulfur dioxide are also transported in from upwind sources. Local emissions dominate the concentrations of coarse particulate mass, elemental carbon, carbon monoxide and non-methane hydrocarbons. Important local sources exist for nitrogen oxides, sulfur dioxide and particulate organic carbon.     

Variations in speciated emissions from spark-ignition and compression-ignition motor vehicles in California's south coast air basin

The U.S. Department of Energy Gasoline/Diesel PM Split Study examined the sources of uncertainties in using an organic compound-based chemical mass balance receptor model to quantify the contributions of spark-ignition (SI) and compression-ignition (CI) engine exhaust to ambient fine particulate matter (PM2.5). This paper presents the chemical composition profiles of SI and CI engine exhaust from the vehicle-testing portion of the study. Chemical analysis of source samples consisted of gravimetric mass, elements, ions, organic carbon (OC), and elemental carbon (EC) by the Interagency Monitoring of Protected Visual Environments (IMPROVE) and Speciation Trends Network (STN) thermal/optical methods, polycyclic aromatic hydrocarbons (PAHs), hopanes, steranes, alkanes, and polar organic compounds. More than half of the mass of carbonaceous particles emitted by heavy-duty diesel trucks was EC (IMPROVE) and emissions from SI vehicles contained predominantly OC. Although total carbon (TC) by the IMPROVE and STN protocols agreed well for all of the samples, the STN/IMPROVE ratios for EC from SI exhaust decreased with decreasing sample loading. SI vehicles, whether low or high emitters, emitted greater amounts of high-molecular-weight particulate PAHs (benzo[ghi]perylene, indeno[1,2,3-cd]pyrene, and coronene) than did CI vehicles. Diesel emissions contained higher abundances of two- to four-ring semivolatile PAHs. Diacids were emitted by CI vehicles but are also prevalent in secondary organic aerosols, so they cannot be considered unique tracers. Hopanes and steranes were present in lubricating oil with similar composition for both gasoline and diesel vehicles and were negligible in gasoline or diesel fuels. CI vehicles emitted greater total amounts of hopanes and steranes on a mass per mile basis, but abundances were comparable to SI exhaust normalized to TC emissions within measurement uncertainty. The combustion-produced high-molecular-weight PAHs were found in used gasoline motor oil but not in fresh oil and are negligible in used diesel engine oil. The contributions of lubrication oils to abundances of these PAHs in the exhaust were large in some cases and were variable with the age and consumption rate of the oil. These factors contributed to the observed variations in their abundances to total carbon or PM2.5 among the SI composition profiles.     

Evaluation of OC/EC speciation by thermal manganese dioxide oxidation and the IMPROVE method

Ambient particulate samples are routinely analyzed for organic and elemental carbon (OC/EC) using either thermal manganese dioxide oxidation (TMO) or thermal volatilization-pyrolysis correction methods, such as the Interagency Monitoring of PROtected Visual Environments (IMPROVE) method with correction by reflectance, or a variation of the National Institute of Occupational Safety and Health (NIOSH) Method 5040 using thermal optical transmittance (TOT). With TMO, EC is modeled after the oxidation properties of submicron graphite and needle coke by MnO2, and is the fraction of total carbon (TC) that is not oxidized at >525 degrees C. In thermal volatilization methods, EC is the fraction of TC that accounts for the light extinction properties of the sample at the start of analysis. Chow et al. (2001) compared IMPROVE and NIOSH methods implemented on the same instrument using 60 samples of various types and found that NIOSH EC was lower than IMPROVE. This study compares total, organic, and elemental carbon measurements from the TMO and IMPROVE thermal optical reflectance (TOR) methods using a sample set consisting of 60 IMPROVE nonurban, 16 Korean urban, 10 Hong Kong urban, and 14 synthetic carbon black samples.     

Auto Emissions,Engine Size,and Fuel Economy

EPA Reference Method 25 for measurement of total gaseous nonmethane organics as carbon in source emissions was evaluated in the laboratory and through field testing. Laboratory evaluation included development and testing of a nonmethane organic analyzer. In addition, a series of tests was performed on the condensate trap recovery system. The tests involved evaluation of two different condensate trap recovery system designs. The first design was very similar to the Federal Register design and the second design was a modified system for minimizing interference from trapped carbon dioxide. Field testing of the method was performed at two different printing plants. Both plants used carbon bed adsorption for solvent recovery and control of VOC emissions. Samples were collected from the inlet and outlet streams of adsorption units at both plants. In addition to Method 25 samples, Method 18 samples were collected for analysis by gas chromatography with flame ionization detection. The results of all the laboratory and field test samples are described.     

Purification of carbonic anhydrase from bovine erythrocytes and its application in the enzymic capture of carbon dioxide

This work presents a study of industrially applicable techniques to obtain a biologically supported carbon dioxide capture system, based on the extraction of carbonic anhydrase from bovine blood. Carbonic anhydrase is a metalloenzyme which catalyzes the reversible hydration of carbon dioxide. The objective of this study was to establish conditions to obtain carbonic anhydrase from bovine erythrocytes and apply it in the capture of carbon dioxide. To achieve this, two different purification techniques were evaluated: one by extraction with the organic solvents chloroform and ethanol, where different solvent proportions were studied; and the other by ammonium sulfate precipitation, testing percent saturations between 10% and 80%. Carbon dioxide was enzymatically captured by its precipitation as calcium carbonate with the enzyme obtained by both techniques. The enzyme extracted by ethanol and chloroform showed an activity of 2623 U mL⁻¹, recovery of 98% and purification factor of 104-fold. That precipitated by ammonium sulfate showed an activity of 2162 U mL⁻¹, recovery of 66% and purification factor of 1.4-fold using 60% ammonium sulfate saturation. The results obtained in the carbon dioxide capture experiments showed that the carbonic anhydrase extracted in this study not only enhanced the hydration of CO₂, but also promoted the formation of CaCO₃.     

水中柴油污染物的微生物降解及其动力学

以混合柴油为靶污染物,通过对比实验研究了油污染物在模拟水环境中的降解效果。研究表明,模拟自然条件下混合柴油污染物总体降解较慢,油质去除率低;生物强化降解条件下,向混合柴油污染水样中添加驯化培养的微生物混合菌群,生物降解速率明显提高,油质去除率达到98%以上。研究还发现,各污染水样中油的降解速率与降解效果随柴油的配比而不同,混合柴油样本中生物柴油的比例越高,样本的降解率越高,表明生物柴油作为碳源有效改善了水中有机营养配比,促进了柴油的去除效果。进一步分析表明,混合柴油在水中的降解过程符合一级反应动力学,生物强化降解条件下,生物柴油比例越高,混合柴油降解速率越快,除油微生物以菌胶团、球菌和丝状菌为主。     

Detection and Measurement of Air Pollutants by Absorptions of Infrared Radiation

A technique of detecting gaseous air pollutants by means of absorption of laser radiation is under development at the NASA Electronics Research Center. The iodine infrared laser and the carbon dioxide infrared laser are forced to emit spectral lines which fall on the infrared absorption bands of atmospheric pollutants. The attenuation of a laser line when passed through an air sample is the measure of the pollutant concentration. The narrow spectral width of the laser emission permits sensitive detection, minimizes interference between pollutants, and allows penetration of atmospheric water bands. The collimation and high power outputs available from lasers permit transmission of the radiation over long straight paths through the atmosphere and over long folded paths in multiple-pass absorption cells. A sample of absorbing gas placed within the laser cavity forces the emission of the selected wavelengths. With a one-half kilometer path to a retro-reflector and back, it is predicted that the following concentrations of air pollutants will be detected by means of the indicated laser lines: carbon monoxide at 2 parts per million in air (ppm), using the 4.86 micron iodine line; nitric oxide at 1 ppm, using the 5.5 micron iodine line; ethylene at 0.1 ppm, using the 10.53 micron carbon dioxide line; sulfur dioxide at 1.5 ppm, using the 9.08 micron carbon dioxide line; and ozone at 0.15 ppm, using the 9.52 micron carbon dioxide line. It seems feasible to extend the technique to other gaseous pollutants such as nitrogen dioxide, methane, butane, and peroxy acetyl nitrate. Continuing effort is being devoted to development and construction of the laser transmitting and receiving equipment. Field testing is planned for the near future.