A new hazard index of complex mixtures integrates bioconcentration and toxicity to refine the environmental risk assessment of effluents

A new methodology to evaluate the overall environmental hazard of unknown mixtures, based on bioconcentration potential and toxicity, was developed using a combination of two methodologies: 1) the estimation of the octanol-water partition coefficient (K(ow)) using reverse-phase high performance liquid chromatography (RP-HPLC) and 2) the toxicity identification evaluation (TIE). Forty seven compounds with known K(ow) and different molecular structures where used for the calibration of the log K(ow) in relation to the retention time in reverse-phase high performance liquid chromatography (RP-HPLC). A linear regression with an R(2)=0.81 and an sd=0.69 was established between log K(ow) and RP-HPLC retention time. This K(ow) estimation method was furthermore validated using seven additional compounds, showing acceptable estimations of the log K(ow) of unknown substances. Two different mixtures were tested, one containing 3,4 Dichloroaniline, Diazinon and 4-Nonylphenol and another one containing a mixture of 16 pesticides. Both mixtures were first tested as a whole effluent and then fractionated and tested, using a miniaturized Daphnia magna test. An equation is presented, that combines both methodologies and establishes a relative hazard index RHI, ranging from 1 to 10 for any particular mixture of chemicals. The results show how the method presented can refine the security factors that could be included in the environmental risk assessment of effluents in the future.     

Aggregate dermal exposure to cyclic siloxanes in personal care products: Implications for risk assessment

Consumers who use personal care products (PCPs) are internally exposed to some of the organic components present of which some may be detected in exhaled air when eliminated. The aim of this study was the quantitative determination of octamethylcyclotetrasiloxane (D4) and decamethylcyclopentasiloxane (D5) in end-exhaled air to study dermal absorption of substances in PCPs. We exposed the forearm of fifteen healthy volunteers for 60 min to pure D4 or D5 and to commercial products containing D4 and D5. Inhalation uptake was kept to a minimum by keeping the forearm in a flow cabinet during dermal exposure and supplying filtered air to the breathing zone of the volunteer during the post-exposure period. End-exhaled air was collected using a breath sampler (Bio-VOC), transferred to carbograph multi-bed adsorbent tubes and analyzed by thermal desorption gas chromatography mass spectrometry (TD-GC-MS). In the end-exhaled air of non-exposed volunteers background concentrations of D4 (0.8–3.5 ng/L) and D5 (0.8–4.0 ng/L) were observed. After exposing the volunteers, the level of D4 and D5 in end-exhaled air did not or barely exceed background concentrations. At t = 90 min, a sharp increase of the D4/D5 concentration in end-exhaled air was observed, which we attributed to the inhalation of the substances during a toilet visit without using inhalation protection devices. When this visit was taken out of the protocol, the sharp increase disappeared. Overall, the results of our study indicate that dermal absorption of D4 and D5 contributes only marginally to internal exposure following dermal applications. As in our study inhalation is the primary route of entry for these compounds, we conclude that its risk assessment should focus on this particular exposure route.     

Cumulative risk assessment of chemical exposures in urban environments

We performed a cumulative risk assessment for people living in a hypothetical urban environment, called Urbania. The main aims of the study were to demonstrate how a cumulative risk assessment for a middle-sized European city can be performed and to identify the bottlenecks in terms of data availability and knowledge gaps. The assessment focused on five air pollutants (i.e., PM??, benzene, toluene, nonane and naphthalene) and six food pesticides (i.e., acetamiprid, carbendazim, chlorpyrifos, diazinon, imidacloprid and permethrin). Exposure predictions showed that PM??, benzene and naphthalene exposure frequently exceeded the standards, and that the indoor environment contributed more than the outdoor environment. Effect predictions showed that mixture and interaction effects were generally limited. However, model calculations indicated potential synergistic effects between naphthalene and benzene and between chlorpyrifos, diazinon and toluene. PM?? dominated the health impact expressed in Disability Adjusted Life Years (DALYs). We conclude that measures to reduce the health impact of environmental pollution should focus on the improvement of indoor air quality and the reduction of PM?? emissions. Cumulative risk assessment can be improved by (1) the development of person-oriented exposure models that can simulate the cumulative exposure history of individuals, (2) a better mechanistic understanding of the effects of cumulative stressors, and (3) the development of instruments to prioritize stressors for inclusion in cumulative risk assessments.     

Perfluoroalkyl and polyfluoroalkyl substances in cord blood of newborns in Shanghai,China: Implications for risk assessment

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) are commonly used in industrial applications and consumer products, and their potential health impacts are of concern, especially for vulnerable population like fetuses. However, in utero exposure to PFASs and health implications are far from fully characterized in China. To fill in the gap, we analyzed 10 PFASs in cord plasma samples (N = 687) collected in Shanghai between 2011 and 2012, one of the regions widely polluted with PFASs in China. A questionnaire survey on maternal and diet-related factors was conducted. Except for perfluoroheptanoic acid (PFHpA) and perfluorooctane sulfonamide (PFOSA), all other PFASs were detected in ˃90% of the samples. Perfluorooctanoic acid (PFOA) was the most predominant PFAS (median value: 6.96 ng/mL), followed by perfluorooctane sulfonate (PFOS) (2.48 ng/mL). PFOA and PFOS combined contributed to 80% of the total PFASs. The final multiple regression models showed that maternal factors including maternal age, body mass index, gestational age, economic status and educational level as well as consumption of fish and wheat were significantly related with concentrations of PFASs in cord blood. The risk assessment using the hazard quotients (HQs) approach on the basis of plasma PFAS levels indicated no potential concern for developmental toxicity in the local newborns. The results demonstrate the unique profiles of local prenatal exposure to PFASs, suggesting that PFOA has been the primary human exposure due to its widespread use and pollution. Special attention to high PFOA exposure and confirmation of potential determinants should be taken as a priority in the future plan for risk management and actions in this area.     

Cobalt and secondary poisoning in the terrestrial food chain: data review and research gaps to support risk assessment

Cobalt is a naturally occurring element found in rocks, soil, water, plants, and animals and has diverse industrial importance. It is cycled in surface environments through many natural processes (e.g. volcanic eruptions, weathering) and can be introduced through numerous anthropogenic activities (e.g. burning of coal or oil, or the production of cobalt alloys). The environmental behaviour of cobalt in terrestrial environment is relatively poorly studied and in particular where Co is used in industrial processes, the baseline information to support wider and long-term environmental impacts is widely dispersed. To support the adoption of new EU regulations on the risk assessment of chemicals, we review here the various aspects of the environmental chemistry, fate and transport of Co across environmental interfaces and discuss the toxicology and potential for bio magnification and food chain accumulation. The soil-to-plant transfer of Co appears to be viable route to expose lower trophic levels to biologically significant concentrations and Co is potentially accumulated in biomass and top soil. Evidence for further accumulation through soil-invertebrate transfer and to higher trophic levels is suggested by some studies but this is obscured by the relatively high variability of published transfer data. This variation is not due to one particular aspect of the transfer of Co in terrestrial environments. Influences are from the variability of geological sources within soil systems; the sensitivity of Co mobility to environmental factors (e.g. pH) and the variety of life strategies for metal elimination/use within biological species. Toxic effects of Co have been suggested for some soil-plant animal studies however, uncertainty in the extrapolation from laboratory to field is a major limitation.     

Implementing systematic review techniques in chemical risk assessment: Challenges,opportunities and recommendations

Systematic review (SR) is a rigorous, protocol-driven approach designed to minimise error and bias when summarising the body of research evidence relevant to a specific scientific question. Taking as a comparator the use of SR in synthesising research in healthcare, we argue that SR methods could also pave the way for a “step change” in the transparency, objectivity and communication of chemical risk assessments (CRA) in Europe and elsewhere. We suggest that current controversies around the safety of certain chemicals are partly due to limitations in current CRA procedures which have contributed to ambiguity about the health risks posed by these substances. We present an overview of how SR methods can be applied to the assessment of risks from chemicals, and indicate how challenges in adapting SR methods from healthcare research to the CRA context might be overcome. Regarding the latter, we report the outcomes from a workshop exploring how to increase uptake of SR methods, attended by experts representing a wide range of fields related to chemical toxicology, risk analysis and SR. Priorities which were identified include: the conduct of CRA-focused prototype SRs; the development of a recognised standard of reporting and conduct for SRs in toxicology and CRA; and establishing a network to facilitate research, communication and training in SR methods. We see this paper as a milestone in the creation of a research climate that fosters communication between experts in CRA and SR and facilitates wider uptake of SR methods into CRA.     

Polonium-210 and lead-210 in the terrestrial environment: a historical review

The radionuclides ²¹⁰Po and ²¹⁰Pb widely present in the terrestrial environment are the final long-lived radionuclides in the decay of ²³⁸U in the earth’s crust. Their presence in the atmosphere is due to the decay of ²²²Rn diffusing from the ground. The range of activity concentrations in ground level air for ²¹⁰Po is 0.03-0.3 Bq m⁻³ and for ²¹⁰Pb 0.2-1.5 Bq m⁻³.In drinking water from private wells the activity concentration of ²¹⁰Po is in the order of 7-48 mBq l⁻¹ and for ²¹⁰Pb around 11-40 mBq l⁻¹. From water works, however, the activity concentration for both ²¹⁰Po and ²¹⁰Pb is only in the order of 3 mBq l⁻¹.Mosses, lichens and peat have a high efficiency in capturing ²¹⁰Po and ²¹⁰Pb from atmospheric fallout and exhibit an inventory of both ²¹⁰Po and ²¹⁰Pb in the order of 0.5-5 kBq m⁻² in mosses and in lichens around 0.6 kBq m⁻². The activity concentrations in lichens lies around 250 Bq kg⁻¹, dry mass.Reindeer and caribou graze lichen which results in an activity concentration of ²¹⁰Po and ²¹⁰Pb of about 1-15 Bq kg⁻¹ in meat from these animals. The food chain lichen-reindeer or caribou, and Man constitutes a unique model for studying the uptake and retention of ²¹⁰Po and ²¹⁰Pb in humans. The effective annual dose due to ²¹⁰Po and ²¹⁰Pb in people with high consumption of reindeer/caribou meat is estimated to be around 260 and 132 μSv a⁻¹ respectively.In soils, ²¹⁰Po is adsorbed to clay and organic colloids and the activity concentration varies with soil type and also correlates with the amount of atmospheric precipitation. The average activity concentration levels of ²¹⁰Po in various soils are in the range of 20-240 Bq kg⁻¹.Plants become contaminated with radioactive nuclides both by absorption from the soil (supported Po) and by deposition of radioactive fallout on the plants directly (unsupported Po). In fresh leafy plants the level of ²¹⁰Po is particularly high as the result of the direct deposition of ²²²Rn daughters from atmospheric deposition. Tobacco is a terrestrial product with high activity concentrations of ²¹⁰Po and ²¹⁰Pb. The overall average activity concentration of ²¹⁰Po is 13 ± 2 Bq kg⁻¹. It is rather constant over time and by geographical origin.The average median daily dietary intakes of ²¹⁰Po and ²¹⁰Pb for the adult world population was estimated to 160 mBq day⁻¹ and 110 mBq day⁻¹, corresponding to annual effective doses of 70 μSv a⁻¹ and 28 μSv a⁻¹, respectively. The dietary intakes of ²¹⁰Po and ²¹⁰Pb from vegetarian food was estimated to only 70 mBq day⁻¹ and 40 mBq day⁻¹ corresponding to annual effective doses of 30.6 μSv a⁻¹ and 10 μSv a⁻¹, respectively. Since the activity concentration of ²¹⁰Po and ²¹⁰Pb in seafood is significantly higher than in vegetarian food the effective dose to populations consuming a lot of seafood might be 5-15 fold higher.     

In vitro screening for population variability in toxicity of pesticide-containing mixtures

Population-based human in vitro models offer exceptional opportunities for evaluating the potential hazard and mode of action of chemicals, as well as variability in responses to toxic insults among individuals. This study was designed to test the hypothesis that comparative population genomics with efficient in vitro experimental design can be used for evaluation of the potential for hazard, mode of action, and the extent of population variability in responses to chemical mixtures. We selected 146 lymphoblast cell lines from 4 ancestrally and geographically diverse human populations based on the availability of genome sequence and basal RNA-seq data. Cells were exposed to two pesticide mixtures – an environmental surface water sample comprised primarily of organochlorine pesticides and a laboratory-prepared mixture of 36 currently used pesticides – in concentration response and evaluated for cytotoxicity. On average, the two mixtures exhibited a similar range of in vitro cytotoxicity and showed considerable inter-individual variability across screened cell lines. However, when in vitro-to-in vivo extrapolation (IVIVE) coupled with reverse dosimetry was employed to convert the in vitro cytotoxic concentrations to oral equivalent doses and compared to the upper bound of predicted human exposure, we found that a nominally more cytotoxic chlorinated pesticide mixture is expected to have greater margin of safety (more than 5 orders of magnitude) as compared to the current use pesticide mixture (less than 2 orders of magnitude) due primarily to differences in exposure predictions. Multivariate genome-wide association mapping revealed an association between the toxicity of current use pesticide mixture and a polymorphism in rs1947825 in C17orf54. We conclude that a combination of in vitro human population-based cytotoxicity screening followed by dosimetric adjustment and comparative population genomics analyses enables quantitative evaluation of human health hazard from complex environmental mixtures. Additionally, such an approach yields testable hypotheses regarding potential toxicity mechanisms.     

Endocrine disrupting pesticides: implications for risk assessment

Endocrine disrupting (ED) chemicals are compounds that alter the normal functioning of the endocrine system, potentially causing disease or deformity in organisms and their offspring. Pesticides are used widely to kill unwanted organisms in crops, public areas, homes and gardens and medicinally to kill parasites. Many are proven or suspected to be EDs. Ancient physiological similarities between different vertebrate groups suggest that disorders observed in wildlife may indicate risks to humans. This makes accurate risk assessment and effective legislation difficult. In this paper, the hazardous properties of pesticides which are known to have ED properties are reviewed in order to assess the implications for risk assessment. As well as data on sources of exposure in the United Kingdom (UK) an assessment of the evidence on the health effects of ED pesticides is also included. In total, 127 have been identified from the literature and their effects and modes of action are listed in this paper. Using the UK as a case study, the types and quantities of pesticides used, and their methods of application are assessed, along with their potential pathways to humans. In the UK reliable data are available only for agricultural use, so non-agricultural routes of pesticide exposure have been poorly quantified. The exposure of people resident in or visiting rural areas could also have been grossly under-estimated. Material links between ED pesticide use and specific illnesses or deformities are complicated by the multifactorial nature of disease, which can be affected by factors such as diet. Despite these difficulties, a large body of evidence has accumulated linking specific conditions to ED pesticides in wildlife and humans. A more precautionary approach to the use of ED pesticides, especially for non-essential purposes is proposed.     

The protection of wildlife from mortality: hypothesis and results for risk assessment

Wildlife deaths associated with cyanide-bearing tailings dams are a significant environmental issue that has affected the gold mining industries for many years and still characterized by little knowledge about how to measure, monitoring, reduce or eliminate those deaths. The purpose of this paper is statistically to determine: the potential for establishing causal relations between exposure to cyanide (in its most common species relevant to tailings) and response (measured by death counts), to develop a protocol of data analysis, the understanding of the significance of data gaps, and the effect of likely risk management interventions to achieve the goals of the International Cyanide Management Code (ICMC); [ICMC The International Cyanide Management Institute. International cyanide management code, the international cyanide management institute 2005, www.cyanidecode.org.]. However, operator's certification under the ICMC is difficult because of the limited data and potentially serious under-estimation of the death counts. This is due to observational skill and monitoring frequency, the small size of the carcasses, large extent of tailings facilities, carcasses loss by; entombment in tailings, sink, or taken by scavenging wildlife. This (1st order or bounding) assessment results focus on bird-deaths, which appear to be most frequent at sites where elevated cyanide concentrations are found. Those results indicate that the empirical causal associations we generate support the hypotheses that: This paper also develops the basis for a complete risk assessment study to be based on additional data gathering activities and detailed statistical analyses. These two activities, combined with a risk management plan also being developed, will provide a tool for compliance with the ICMC.     

Groundwater contamination by microbiological and chemical substances released from hospital wastewater: Health risk assessment for drinking water consumers

Contamination of natural aquatic ecosystems by hospital wastewater is a major environmental and human health issue. Disinfectants, pharmaceuticals, radionuclides and solvents are widely used in hospitals for medical purposes and research. After application, some of these substances combine with hospital effluents and, in industrialised countries, reach the municipal sewer network. In certain developing countries, hospitals usually discharge their wastewater into septic tanks equipped with diffusion wells. The discharge of chemical compounds from hospital activities into the natural environment can lead to the pollution of water resources and risks for human health. The aim of this article is to present: (i) the steps of a procedure intended to evaluate risks to human health linked to hospital effluents discharged into a septic tank equipped with a diffusion well; and (ii) the results of its application on the effluents of a hospital in Port-au-Prince. The procedure is based on a scenario that describes the discharge of hospital effluents, via septic tanks, into a karstic formation where water resources are used for human consumption. COD, Chloroform, dichlomethane, dibromochloromethane, dichlorobromomethane and bromoform contents were measured. Furthermore, the presence of heavy metals (chrome, nickel and lead) and faecal coliforms were studied. Maximum concentrations were 700 NPP/100 ml for faecal coliforms and 112 mg/L for COD. A risk of infection of 10^? 5 infection per year was calculated. Major chemical risks, particularly for children, relating to Pb(II), Cr(III), Cr(VI) and Ni(II) contained in the ground water were also characterised. Certain aspects of the scenario studied require improvement, especially those relating to the characterisation of drugs in groundwater and the detection of other microbiological indicators such as protozoa, enterococcus and viruses.     

Priority and emerging flame retardants in rivers: Occurrence in water and sediment,Daphnia magna toxicity and risk assessment

The occurrence, partitioning and risk of eight polybrominated diphenyl ethers (PBDEs), nine new brominated (NBFRs) and ten organophosphorus flame retardants (OPFRs) were evaluated in three Spanish rivers suffering different anthropogenic pressures (Nalón, Arga and Besòs). OPFRs were ubiquitous contaminants in water (ΣOPFRs ranging from 0.0076 to 7.2 μg L^− 1) and sediments (ΣOPFRs ranging 3.8 to 824 μg kg^− 1). Brominated flame retardants were not detected in waters, whereas ΣPBDEs ranged from 88 to 812 μg kg^− 1 and decabromodiphenyl ethane (DBDPE) reached 435 μg kg^− 1 in sediments from the River Besòs, the most impacted river. The occurrence of flame retardants in river water and sediment was clearly associated with human activities, since the highest levels occurred near urban and industrial zones and after wastewater treatment plants discharge. Daphnia magna toxicity was carried out for OPFRs, the most ubiquitous flame retardants, considering individual compounds and mixtures. Toxicity of nine tested OPFRs differed largely among compounds, with EC₅₀ values ranging over three magnitude orders (0.31–381 mg L^− 1). Results evidenced that these compounds act by non-polar narcosis, since their toxicity was proportional to their lipophilicity (K_ow). Furthermore, their joint toxicity was additive, which means that single and joint toxicity can be predicted knowing their concentration levels in water using quantitative structure activity relationships (QSARs) and predictive mixture models. Based on these results, a risk assessment considering joint effect was performed calculating and summing risk quotients (RQs) for the water and sediment samples. No significant risk to D. magna (ΣRQs < 1) was observed for any of the monitored rivers.     

Distribution of carbon 14 in the terrestrial environment close to French nuclear power plants

For 10 years, (14)C measurements have been performed around French nuclear power plant sites, both in zones influenced and zones not influenced by gaseous releases. Examining the results from these measurements in the terrestrial environment shows that the discharges have a very slight impact on the radiocarbon level (with a relative increase in the specific activity of the order of 3 Bqkg(-1)C in the influenced areas). In correlation, there is a near-negligible increase in dose, on average less than 0.1 microSvyr(-1), with reference to a dose from background radiation, which is of the order of 10 microSvyr(-1). The deltaC13 values are very similar between the influenced zone and the non-influenced zone, with a mean of -27 per thousand. The mean DeltaC14 varies from 101 per thousand in the non-influenced zone to 123 per thousand in the influenced zone. Moreover, a general reduction in (14)C concentration was found, with a time constant of the order of 95 years. The current level of (14)C specific activity in terrestrial environment is estimated to be 242+/-6 Bqkg(-1)C.     

Environmental risk assessment of metals: tools for incorporating bioavailability

In this paper, some of the main processes and parameters which affect metal bioavailability and toxicity in the aquatic environment and its implications for metal risk assessment procedures will be discussed. It has become clear that, besides chemical processes (speciation, complexation), attention should also be given to physiological aspects for predicting metal toxicity. The development of biotic ligand models (BLMs), which combine speciation models with more biologically oriented models (e.g. GSIM), has offered an answer to this need. The various BLMs which have been developed and/or refined for a number of metals (e.g. Cu, Ag, Zn) and species (algae, crustaceans, fish) are discussed here. Finally, the potential of the BLM approach is illustrated through a theoretical exercise in which chronic zinc toxicity to Daphnia magna is predicted in three regions, taking the physico-chemical characteristics of these areas into account.     

Vulnerability of human environment to risk: case of groundwater contamination risk

Based on a theoretical revision of the social vulnerability concept, this article proposes a scheme of vulnerability indicators within the human environment focused on different aetiology risks. An adaptation of this generic scheme of vulnerability factors is set for the specific field of aquifer contamination risk, as well as a methodology for its analysis. Finally, model application examples are given for the Sierra de Líbar and Sierra de Mijas carbonate aquifers and the Vélez River detrital aquifer, all of which are located in the south of Spain. Obtained cartography results show a range of utilities for risk mitigation and permit appropriate spatial discrimination for its performance over different scales. The exposure and vulnerability of the groundwater contamination risk concept is evaluated in specific maps, taking into account the resident population as well as their assets.     

Health risk assessment for uranium in Korean groundwater

We analyzed the radiological and chemical risks of uranium in groundwater. The total sample number over 4 years was 498. There were several use patterns of groundwater in Korea, but we considered the risk only for drinking water. The geometric mean of uranium concentration in 10 areas in Korea was 0.17 microg x l(-1). The excess cancer risks were in the 10(-7) level in the radiological risk aspect and the hazard quotient was 0.005 in the chemical risk aspect. Therefore, we could conclude that an adverse health risk is unlikely to be posed due to exposure to uranium. However, the concentration of uranium must be monitored periodically and adequate action taken in the few and small areas that contain high uranium levels in groundwater.     

Modelling multiple dispersion of radionuclides through the environment

The migration of a contaminant through the environment is the result of the transport by a variety of biotic and abiotic carriers which move according to different dispersion mechanisms. Consequently, the patterns of the distribution of a pollutant in the environment cannot be ever explained on the basis of a single migration process or assuming that the concentrations of contaminant in the different kinds of carriers quickly reach the equilibrium condition. The present work discusses two examples (wash-off from catchments and transport through soils of radionuclides) that clearly demonstrate the inadequacy of “single dispersion” models to predict these patterns. On the contrary, models based on multiple dispersion can successfully simulate the particular features of the above mentioned processes. It was demonstrated that the time behaviour of radionuclide migration rates from catchment of different rivers vary within small ranges as a consequence of multiple dispersion. This result can be useful for the development of generic predictive models.     

A systemic health risk assessment for the chromium cycle in Taiwan

Health risk assessment (HRA) has been recognized as a useful tool for identifying health risks of human activities. In particular, this method has been well applied to spatially defined units, such as a production plant, a treatment facility, and a contaminated site. However, the management strategies based on the risk information will be more efficient if the comprehensive picture of total risks from all kinds of sources is depicted. In principle, the total risks can be obtained when all risk sources are assessed individually. Apparently, this approach demands huge amount of efforts. This study develops a methodology that combines substance flow and risk estimation to facilitate examination of risk in a systemic way and provide comprehensive understanding of risk generation and distribution corresponding to flows of substances in the anthroposphere and the environment. Substance flow analysis (SFA) and HRA method is integrated to produce a systemic risk assessment method, from which substance management schemes can be derived. In this study, the chromium cycle in Taiwan is used as an example to demonstrate the method, by which the associated substance flow in the economy and the risk caused by the substance in the environmental system is determined. The concentrations of pollutants in the environmental media, the resultant risks and hazard quotients are calculated with the widely-used CalTOX multimedia model.     

Regional risk assessment for contaminated sites part 1: vulnerability assessment by multicriteria decision analysis

As highlighted in the EU Soil Communication, local contamination is one of the main soil threats and it is often related to present and past industrial activities which left a legacy of a high number of contaminated sites in Europe. These contaminated sites can be harmful to many different receptors according to their sensitivity/susceptibility to contamination, and specific vulnerability evaluations are needed in order to manage this widely spread environmental issue. In this paper a novel comprehensive vulnerability assessment framework to assess regional receptor susceptibility to contaminated site is presented. The developed methodology, which combines multi criteria decision analysis (MCDA) techniques and spatial analysis, can be applied to different receptors recognized as relevant for regional assessment. In order to characterize each receptor, picked parameters significant for the estimation of the vulnerability to contaminated sites have been selected, normalized and aggregated by means of multi criteria decision analysis (MCDA) techniques. The developed MCDA methodology, based on the Choquet integral, allows to include expert judgments for the elicitation of synergic and conflicting effects between involved criteria and is applied to all the geographical objects representing the identified receptors. To test the potential of the vulnerability methodology, it has been applied to a specific case study area in the upper Silesia region of Poland where it proved to be reliable and consistent with the environmental experts' expected results. The vulnerability assessment results indicate that groundwater is the most vulnerable receptor characterized by a wide area with vulnerability scores belonging to the highest vulnerability class. As far as the other receptors are concerned, human health and surface water are characterized by quite homogeneous vulnerability scores falling in the medium-high vulnerability classes, while protected areas resulted to be the less vulnerable receptor with only one protected area falling in the medium vulnerability class. The vulnerability assessment results will support the regional risk assessment for the ranking of potentially contaminated sites at regional scale.