Novel brominated flame retardants: a review of their analysis, environmental fate and behaviour

This review summarises current knowledge about production volumes, physico-chemical properties, analysis, environmental occurrence, fate and behaviour and human exposure to the "novel" brominated flame retardants (NBFRs). We define the term NBFRs as relating to BFRs which are new to the market or newly/recently observed in the environment. Restrictions and bans on the use of some polybrominated diphenyl ether (PBDE) formulations, in many jurisdictions, have created a market for the use of NBFRs. To date, most data on NBFRs have arisen as additional information generated by research designed principally to study more "traditional" BFRs, such as PBDEs. This has led to a wide variety of analytical approaches for sample extraction, extract purification and instrumental analysis of NBFRs. An overview of environmental occurrence in abiotic matrices, aquatic biota, terrestrial biota and birds is presented. Evidence concerning the metabolism and absorption of different NBFRs is reviewed. Human exposure to NBFRs via different exposure pathways is discussed, and research gaps related to analysis, environmental sources, fate, and behaviour and human exposure are identified.     

Environmental and human risk hierarchy of pesticides: A prioritization method,based on monitoring,hazard assessment and environmental fate

A pesticide prioritization approach was developed and implemented in the Pinios River Basin of Central Greece. It takes under consideration the Level of Environmental Risk containing information on the frequency of occurrence of pesticides above environmental thresholds, the intensity of this occurrence and the spatial distribution as well as information about the fate and behavior of pesticides in the environment and the potential to have adverse impact on humans' health. Original 3-year monitoring data from 102 Stationary Sampling Sites located on rivers and their tributaries, reservoirs, streams and irrigation/drainage canals giving rise to a collection of 2382 water samples resulting in 7088 data sets, were included in this integrated prioritization study.Among 302 monitored active ingredients, 119 were detected at least once and the concentrations found in the aquatic systems for 41% of compounds were higher than the respective lowest Predicted Non-Effect Concentration (PNEC) values. Sixteen and 5 pesticides were found with risk ratios (MEC_max/PNEC) above 10 (high concern) and 100 (very high concern), respectively. However, pesticides with maximum Measured Environmental Concentration (MEC_max) values exceeding by 1000 times the respective lowest PNEC values were also found which were considered of extremely high concern; in the latter group were included prometryn, chlorpyrifos, diazinon, λ-cyhalothrin, cypermethrin, α-cypermethrin deltamethrin, ethalfluralin and phosmet. The sensitivity of the analytical methods used in the monitoring study was considered inadequate to meet the toxicological endpoints for 32 pesticides. The widest distribution of occurrence in the Stationary Sampling Sites of the monitoring program was found for the pesticides, prometryn, fluometuron, terbuthylazine, S-metolachlor, chlorpyrifos, diphenylamine, acetochlor, alachlor, 2,4-D, etridiazole, imidacloprid and lindane (γ-ΗCH). Among the 27 priority pesticides included in the Directive 2013/39/EU, in the present study 13 pesticides were considered as candidates for River Basin Specific Pollutants (RBSP) for the River Basin of Pinios. Among the 30 pesticide specific pollutants that were established by the Greek authorities, in the present study only 6 were considered as candidates for RBSP for the river basin of Pinios. As a result of the implementation of the prioritization approach developed in this study a total of 71 pesticides were identified as being RBSP for the river basin of Pinios. The higher Level of Environmental Risk was found to be exerted by the organophosphorus insecticide chlorpyrifos, followed by lindane and prometryn.The present study provides background information for important decisions to be made concerning the selection of pesticides which should be included in the target analyte list of new monitoring and screening programs of surface water quality in the Pinios River Basin. In addition, the prioritization approach proposed here can be useful for the development of River Basin Management Plans.     

Occurrence,fate and effects of azoxystrobin in aquatic ecosystems: A review

The use of pesticides for crop protection may result in the presence of toxic residues in environmental matrices. In the aquatic environment, pesticides might freely dissolve in the water or bind to suspended matter and to the sediments, and might be transferred to the organisms' tissues during bioaccumulation processes, resulting in adverse consequences to non-target species. One such group of synthetic organic pesticides widely used worldwide to combat pathogenic fungi affecting plants is the strobilurin chemical group. Whereas they are designed to control fungal pathogens, their general modes of action are not specific to fungi. Consequently, they can be potentially toxic to a wide range of non-target organisms. The present work had the intent to conduct an extensive literature review to find relevant research on the occurrence, fate and effects of azoxystrobin, the first patent of the strobilurin compounds, in aquatic ecosystems in order to identify strengths and gaps in the scientific database. Analytical procedures and existing legislation and regulations were also assessed. Data gathered in the present review revealed that analytical reference standards for the most relevant environmental metabolites of azoxystrobin are needed. Validated confirmatory methods for complex matrices, like sediment and aquatic organisms' tissues, are very limited. Important knowledge of base-line values of azoxystrobin and its metabolites in natural tropical and estuarine/marine ecosystems is lacking. Moreover, some environmental concentrations of azoxystrobin found in the present review are above the Regulatory Acceptable Concentration (RAC) in what concerns risk to aquatic invertebrates and the No Observed Ecologically Adverse Effect Concentration (NOEAEC) reported for freshwater communities. The present review also showed that there are very few data on azoxystrobin toxicity to different aquatic organisms, especially in what concerns estuarine/marine organisms. Besides, toxicity studies mostly address azoxystrobin and usually neglect the more relevant environmental metabolites. Further work is also required in what concerns effects of exposure to multi-stressors, e.g. pesticide mixtures. Even though Log K_ow for azoxystrobin and R234886, the main metabolite of azoxystrobin in water, are below 3, the bio-concentration factor and the bioaccumulation potential for azoxystrobin are absent in the literature. Moreover, no single study on bioaccumulation and biomagnification processes was found in the present review.     

Occurrence,fate and ecological risk of chlorinated paraffins in Asia: A review

Chlorinated paraffins (CPs), complex mixtures of polychlorinated alkanes, are widely used in various industries and are thus ubiquitous in the receiving environment. The present study comprehensively reviewed the occurrence, fate and ecological risk of CPs in various environmental matrices in Asia. Releases from the production and consumption of CPs or CP-containing materials, wastewater discharge and irrigation, sewage sludge application, long-range atmospheric transport and aerial deposition have been found to be most likely sources and transport mechanisms for the dispersion of CPs in various environmental matrices, such as air, water, sediment, soil and biota. CPs can be bioaccumulated in biota and biomagnified through food webs, likely causing toxic ecological effects in organisms and posing health risks to humans. Inhalation, dust ingestion and dietary intake are strongly suggested as the major routes of human exposure. Research gaps are discussed to highlight the perspectives of future research to improve future efforts regarding the analysis of CPs, the environmental occurrence and elimination of CPs, the total environmental pressure, and the risks to organisms and populations.     

Organoarsenicals in poultry litter: Detection,fate, and toxicity

Arsenic contamination in groundwater has endangered the health and safety of millions of people around the world. One less studied mechanism for arsenic introduction into the environment is the use of organoarsenicals in animal feed. Four organoarsenicals are commonly employed as feed additives: arsanilic acid, carbarsone, nitarsone, and roxarsone. Organoarsenicals are composed of a phenylarsonic acid molecule with substituted functional groups. This review documents the use of organoarsenicals in the poultry industry, reports analytical methods available for quantifying organic arsenic, discusses the fate and transport of organoarsenicals in environmental systems, and identifies toxicological concerns associated with these chemicals. In reviewing the literature on organoarsenicals, several research needs were highlighted: advanced analytical instrumentation that allows for identification and quantification of organoarsenical degradation products; a greater research emphasis on arsanilic acid, carbarsone, and nitarsone; identification of degradation pathways, products, and kinetics; and testing/development of agricultural wastewater and solid treatment technologies for organoarsenical-laden waste.     

Ozone and natural systems: understanding exposure,response, and risk

Research aimed at understanding the response of plants to ozone has been conducted for over four decades but little of it has addressed intact natural systems. Even so, there is sufficient scientific information at this time to support air quality standards that will protect natural terrestrial ecosystems from ozone. What is unknown is the risk associated with continued exposure of natural systems, including both above- and below-ground components, in combination with other stresses including changing temperature and precipitation, elevated carbon dioxide, pests and pathogens, invasive species, and other activities that may fragment the landscape. Research to support an assessment of the ecological risk associated with ozone as it exists, in a milieu of stresses, must include endpoints beyond those addressed in the past, primarily productivity and species composition. To estimate the risk to society of ozone impacts on natural systems, endpoints such as the integrity of soil food webs, the quantity and quality of water supplied from terrestrial ecosystems, wildlife and recreational values, and the transfer and fate of carbon, nutrients, and water within the systems must be quantified. Not only will this research provide the basis for a sound estimate of risk, but also it will improve our understanding of fundamental ecosystem processes.     

A gender approach to understanding the differentiated impact of barriers to adaptation: responses to climate change in rural Ethiopia

While adaptation has received a fair amount of attention in the climate change debate, barriers to adaptation are the focus of a more specific, recent discussion. In this discussion, such barriers are generally treated as having a uniform, negative impact on all actors. However, we argue that the precise nature and impact of such barriers on different actors has so far been largely overlooked. Our study of two drought-prone communities in rural Ethiopia sets out to examine how female- and male-headed households adapt to climate change, particularly focusing on how a variety of barriers influence the choice of adaptation measures to varying extents. To this purpose, we built a conceptual framework based on the Sustainable Livelihood Approach. Data were collected using semi-structured interviews and focus group discussions with male- and female-headed households, community leaders and local extension workers. Our findings suggest that gender-based differences in the choice of adaptation measures at the household level are driven by cultural, social, financial and institutional barriers. Barriers to adaptation—particularly when interacting—have a differentiated impact upon different actors. This outcome hints at the need for donors and policymakers to develop intervention strategies that are sensitive to this fact.     

A sustainable method for optimizing product design with trade-off between life cycle cost and environmental impact

In today’s competitive market, corporations have learned that taking sustainability issues into account can significantly improve their public image. Modern producers therefore must simultaneously reduce the environmental impact of their products and make economic gains. Therefore, making trade-offs between economic and environmental issues is required to ensure a company’s continuity. In doing so, companies have attached a great deal of importance to the new product design phase. However, optimization at the design stage becomes very complex for a product with a large number of parts, which can have several design alternatives with similar forms and functionality, but different costs and environmental impacts. In the automobile, shipbuilding and aircraft industries, if the conventional complete enumeration method is applied, the time required for selecting the optimal combination of design alternatives with respect to life cycle cost and environmental impact may exceed a human’s natural life span. To overcome this limitation, this paper introduces an optimization method for use as a design aid tool that enables a designer to assess the life cycle cost and environmental impact of his/her design very early in the product development process. To support the developed method, an illustration is provided using a case study on a locally manufactured automobile.     

Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.     

Integrated health impact assessment of travel behaviour: Model exploration and application to a fuel price increase

Transportation policy measures often aim to change travel behaviour towards more efficient transport. While these policy measures do not necessarily target health, these could have an indirect health effect.We evaluate the health impact of a policy resulting in an increase of car fuel prices by 20% on active travel, outdoor air pollution and risk of road traffic injury. An integrated modelling chain is proposed to evaluate the health impact of this policy measure. An activity-based transport model estimated movements of people, providing whereabouts and travelled kilometres. An emission- and dispersion model provided air quality levels (elemental carbon) and a road safety model provided the number of fatal and non-fatal traffic victims. We used kilometres travelled while walking or cycling to estimate the time in active travel. Differences in health effects between the current and fuel price scenario were expressed in Disability Adjusted Life Years (DALY).A 20% fuel price increase leads to an overall gain of 1650 (1010–2330) DALY. Prevented deaths lead to a total of 1450 (890–2040) Years Life Gained (YLG), with better air quality accounting for 530 (180–880) YLG, fewer road traffic injuries for 750 (590–910) YLG and active travel for 170 (120–250) YLG. Concerning morbidity, mostly road safety led to 200 (120–290) fewer Years Lived with Disability (YLD), while air quality improvement only had a minor effect on cardiovascular hospital admissions. Air quality improvement and increased active travel mainly had an impact at older age, while traffic safety mainly affected younger and middle-aged people.This modelling approach illustrates the feasibility of a comprehensive health impact assessment of changes in travel behaviour. Our results suggest that more is needed than a policy rising car fuel prices by 20% to achieve substantial health gains. While the activity-based model gives an answer on what the effect of a proposed policy is, the focus on health may make policy integration more tangible. The model can therefore add to identifying win–win situations for both transport and health.     

The sources and fate of 210Po in the urban air: A review

The origin of ²¹⁰Po activity and its fluctuations in the air are discussed in this paper. In the case of atmospheric aerosol samples, a comparison of the ²¹⁰Po/²¹⁰Pb and ²¹⁰Bi/²¹⁰Pb activity ratios makes it possible not only to determine aerosol residence times but also to appraise the contribution of the unsupported ²¹⁰Po coming from other sources than ²²²Rn decay, such as human industrial activities, especially coal combustion. A simple mathematical method makes it possible to observe the seasonal fluctuations of the anthropogenic excess of ²¹⁰Po in the urban air. The average doses of ²¹⁰Po intake with food (including drinking water) and inhalation of urban aerosols are usually lower than those from ²¹⁰Po intake by cigarette smokers and negligible in comparison to total natural radiation exposure.     

The implications of cultural differences in laundry behaviours for design for sustainable behaviour: A case study between the UK,India and Brazil

Traditional research into sustainable design has typically focused on reducing the environmental impact of products during the manufacture and disposal stages of a products' lifecycle. The last decade, however, has seen an explosion of research into understanding and moderating user behaviour during the use phase of a products' lifecycle; often the most resource-intensive phase. One of the biggest factors that affects behaviour is a users cultural context; however, the effect of cultural context on design for sustainable behaviour has had little exploration in this relatively new research field.     

A comparative review for understanding elite interest and climate change policy in China

China’s climate change policy has rapidly evolved from one of neglect to necessity with sinologists drawing on a wide range of theories in trying to explain this shift. The rising influence of citizens' movements coupled with international pressure are often cited as significant drivers behind the government’s evolving climate change strategy. But can the influence of public pressure and international lobbying offer a complete explanation for the government’s dramatic policy changes? In this article, we advance theoretical pluralism where three contending schools of thought are made complementary to offer distinct explanations for understanding the mechanisms and rationale for Beijing’s elite-driven climate change policy. In brief, by bridging three separate theoretical streams including rational choice theory, authoritarian environmentalism and advocacy coalition framework, we show that the interests of elites in China’s upper political echelon are the driving force behind the country’s climate change policy.     

Nonylphenol in the environment: a critical review on occurrence, fate, toxicity and treatment in wastewaters

Nonylphenol is a toxic xenobiotic compound classified as an endocrine disrupter capable of interfering with the hormonal system of numerous organisms. It originates principally from the degradation of nonylphenol ethoxylates which are widely used as industrial surfactants. Nonylphenol ethoxylates reach sewage treatment works in substantial quantities where they biodegrade into several by-products including nonylphenol. Due to its physical-chemical characteristics, such as low solubility and high hydrophobicity, nonylphenol accumulates in environmental compartments that are characterised by high organic content, typically sewage sludge and river sediments, where it persists. The occurrence of nonylphenol in the environment is clearly correlated with anthropogenic activities such as wastewater treatment, landfilling and sewage sludge recycling. Nonylphenol is found often in matrices such as sewage sludge, effluents from sewage treatment works, river water and sediments, soil and groundwater. The impacts of nonylphenol in the environment include feminization of aquatic organisms, decrease in male fertility and the survival of juveniles at concentrations as low as 8.2 mug/l. Due to the harmful effects of the degradation products of nonylphenol ethoxylates in the environment, the use and production of such compounds have been banned in EU countries and strictly monitored in many other countries such as Canada and Japan. Although it has been shown that the concentration of nonylphenol in the environment is decreasing, it is still found at concentrations of 4.1 mug/l in river waters and 1 mg/kg in sediments. Nonylphenol has been referred to in the list of priority substances in the Water Frame Directive and in the 3rd draft Working Document on Sludge of the EU. Consequently there is currently a concern within some industries about the possibility of future regulations that may impose the removal of trace contaminants from contaminated effluents. The significance of upgrading sewage treatment works with advanced treatment technologies for removal of trace contaminants is discussed.     

Occurrence,fate and ecological risk of five typical azole fungicides as therapeutic and personal care products in the environment: A review

Azole fungicides are widely used to treat fungal infection in human. After application, these chemicals may reach to the receiving environment via direct or indirect discharge of wastewaters, thus posing potential risks to non-target organisms. We aimed to review the occurrence, fate and toxicological effects of some representative household azole fungicides in the environment. Azole fungicides were widely detected in surface water and sediment of the aquatic environment due to their incomplete removal in wastewater treatment plants. These chemicals are found resistant to microbial degradation, but can undergo photolysis under UV irradiation. Due to different physiochemical properties, azole fungicides showed different environmental behaviors. The residues of azole fungicides could cause toxic effects on aquatic organisms such as algae and fish. The reported effects include regulation changes in expression of cytochrome P450-related genes and alteration in CYP450-regulated steroidogenesis causing endocrine disruption in fish. Further studies are essential to investigate the removal of azole fungicides by advanced treatment technologies, environmental fate such as natural photolysis, and toxic pathways in aquatic organisms.     

Agroforestry environment,potentiality and risk in India: a remote sensing and GIS understanding

Environment, Development and Sustainability - The study utilized the tree covers per cent, agroforestry suitability, present and future (2050) climate, agriculture vulnerability (2050), percentage...     

A walking-based measurement for understanding the relationship between dense urban form and community facility distribution: a case study in the old town of Fuzhou,China

Environment, Development and Sustainability - Improving the livability and sustainability of the dense urban environments in the old town of cities has been a focus of attention in urban planning,...     

Ambient aerosol sampling: Problems,goals and wind tunnel test results of hi-volume samplers

The area of ambient air sampling and its inherent problems and current goals are discussed in general. In particular, recently completed tests of the collection effectiveness of the Rocky Flats Hi-Volume Sampler are compared to previously completed tests of the Standard EPA Hi-Volume Sampler for a variety of field realistic conditions. Collection effectiveness is defined as the ratio of the aerosol collected on the collection substrates of the sampler to that collected by an isokinetic sampling system.The collection effectiveness of the Standard EPA Hi-Volume Sampler was determined as a function of particle size (5–50 μm) and sampler orientation (0° and 45°) at a base condition wind speed of 4.6 m/s and 8% relative turbulence intensity. The results indicated a strong effect of orientation on collection effectiveness at a sampling rate of 1416 l/min. Wind speed over the range of 1.5–4.6 m/s does not greatly influence the collection effectiveness of 15 μm particles. Free stream turbulence levels of 1 and 8% relative intensity has no effect upon collection characteristics.The collection effectiveness of the Rocky Flats Hi-Volume Sampler was determined as a function of particle size (1–34 μm), wind speed (1.52–12.19 m/s) and sampler orientation to the mean flow (0°, 45°, 180°). The results show the sampler, with an inlet flow rate of 880 l/min, has an inlet effectiveness that was a slight function of orientation angle for particles 1–10 μm with a larger effect seen for 20–34 μm; a strong effect of velocity was seen up to 5 m/s where a further increase showed only a slight decrease in effectiveness.The Microsorban-98 filter that is presently used in the Rocky Flats Sampler was tested for efficiency over the size range of particles from 0.01–1 μm and with three different face velocities using the sampler flow rates of 600, 800 and 1 000 l/min corresponding to pressure drops of 20–24 in. of water (3.74–4.49 cm HaG). The filter paper, which was of the fiber type, was found to be 99.9% efficient over the range of particle sizes and pressure drops tested.     

Groundwater in the Limpopo Basin: occurrence,use and impact

The Limpopo River Basin is underlain by an alluvial aquifer along the main river stem and fractured water-bearing units in tributary catchments. Notwithstanding that development priorities in parts of the basin in South Africa have historically preferred surface water sources for irrigation and domestic supply, water resources auditing suggests that groundwater presents the only viable alternative source of cost-effective supply to meet future requirements. However, while aquifer yields are favourable in places, averaging 16.7 l/s for main-stem alluvium, groundwater is already extensively used. Between 1995 and 2002, total groundwater use in the area rose by almost 40%, increasing from 98 to 136 million m³ per year. In all catchments, groundwater use grew by varying proportions, reaching a rather high 200% in the Mogalakwena catchment. In the particular case of commercial irrigation, over-exploitation of groundwater has been recorded in a number of places, especially in the northwest where drawdowns of more than 50 m have resulted from decades of intense agricultural water use. Although groundwater use for mining is still low at 4% of total usage in the study area, the region is currently witnessing a surge in mining operations, and a significant growth in water requirements is envisaged for mining development. Further, domestic water supply to the predominantly rural dwellers in the area is relatively low, even in terms of meeting the basic need of 25 l/day per person, underscoring the fact that groundwater will remain a critical source of community drinking water in the foreseeable future. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.