Integrated testing strategy (ITS) for bioaccumulation assessment under REACH

REACH (registration, evaluation, authorisation and restriction of chemicals) regulation requires that all the chemicals produced or imported in Europe above 1 tonne/year are registered. To register a chemical, physicochemical, toxicological and ecotoxicological information needs to be reported in a dossier. REACH promotes the use of alternative methods to replace, refine and reduce the use of animal (eco)toxicity testing. Within the EU OSIRIS project, integrated testing strategies (ITSs) have been developed for the rational use of non-animal testing approaches in chemical hazard assessment. Here we present an ITS for evaluating the bioaccumulation potential of organic chemicals. The scheme includes the use of all available data (also the non-optimal ones), waiving schemes, analysis of physicochemical properties related to the end point and alternative methods (both in silico and in vitro). In vivo methods are used only as last resort. Using the ITS, in vivo testing could be waived for about 67% of the examined compounds, but bioaccumulation potential could be estimated on the basis of non-animal methods. The presented ITS is freely available through a web tool.     

Applying network analysis and Nebula (neighbor-edges based and unbiased leverage algorithm) to ToxCast data

BackgroundToxCast data have been used to develop models for predicting in vivo toxicity. To predict the in vivo toxicity of a new chemical using a ToxCast data based model, its ToxCast bioactivity data are needed but not normally available. The capability of predicting ToxCast bioactivity data is necessary to fully utilize ToxCast data in the risk assessment of chemicals.ObjectivesWe aimed to understand and elucidate the relationships between the chemicals and bioactivity data of the assays in ToxCast and to develop a network analysis based method for predicting ToxCast bioactivity data.MethodsWe conducted modularity analysis on a quantitative network constructed from ToxCast data to explore the relationships between the assays and chemicals. We further developed Nebula (neighbor-edges based and unbiased leverage algorithm) for predicting ToxCast bioactivity data.ResultsModularity analysis on the network constructed from ToxCast data yielded seven modules. Assays and chemicals in the seven modules were distinct. Leave-one-out cross-validation yielded a Q² of 0.5416, indicating ToxCast bioactivity data can be predicted by Nebula. Prediction domain analysis showed some types of ToxCast assay data could be more reliably predicted by Nebula than others.ConclusionsNetwork analysis is a promising approach to understand ToxCast data. Nebula is an effective algorithm for predicting ToxCast bioactivity data, helping fully utilize ToxCast data in the risk assessment of chemicals.     

Evaluation of in vitro vs. in vivo methods for assessment of dermal absorption of organic flame retardants: A review

There is a growing interest to study human dermal exposure to a large number of chemicals, whether in the indoor or outdoor environment. Such studies are essential to predict the systemic exposure to xenobiotic chemicals for risk assessment purposes and to comply with various regulatory guidelines. However, very little is currently known about human dermal exposure to persistent organic pollutants. While recent pharmacokinetic studies have highlighted the importance of dermal contact as a pathway of human exposure to brominated flame retardants, risk assessment studies had to apply assumed values for percutaneous penetration of various flame retardants (FRs) due to complete absence of specific experimental data on their human dermal bioavailability. Therefore, this article discusses the current state-of-knowledge on the significance of dermal contact as a pathway of human exposure to FRs. The available literature on in vivo and in vitro methods for assessment of dermal absorption of FRs in human and laboratory animals is critically reviewed. Finally, a novel approach for studying human dermal absorption of FRs using in vitro three-dimensional (3D) human skin equivalent models is presented and the challenges facing future dermal absorption studies on FRs are highlighted.     

Uncertainties in human health risk assessment of environmental contaminants: A review and perspective

Addressing uncertainties in human health risk assessment is a critical issue when evaluating the effects of contaminants on public health. A range of uncertainties exist through the source-to-outcome continuum, including exposure assessment, hazard and risk characterisation. While various strategies have been applied to characterising uncertainty, classical approaches largely rely on how to maximise the available resources. Expert judgement, defaults and tools for characterising quantitative uncertainty attempt to fill the gap between data and regulation requirements. The experiences of researching 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) illustrated uncertainty sources and how to maximise available information to determine uncertainties, and thereby provide an ‘adequate’ protection to contaminant exposure. As regulatory requirements and recurring issues increase, the assessment of complex scenarios involving a large number of chemicals requires more sophisticated tools. Recent advances in exposure and toxicology science provide a large data set for environmental contaminants and public health. In particular, biomonitoring information, in vitro data streams and computational toxicology are the crucial factors in the NexGen risk assessment, as well as uncertainties minimisation. Although in this review we cannot yet predict how the exposure science and modern toxicology will develop in the long-term, current techniques from emerging science can be integrated to improve decision-making.     

A new multimedia contaminant fate model for China: How important are environmental parameters in influencing chemical persistence and long-range transport potential?

We present a new multimedia chemical fate model (SESAMe) which was developed to assess chemical fate and behaviour across China. We apply the model to quantify the influence of environmental parameters on chemical overall persistence (P_OV) and long-range transport potential (LRTP) in China, which has extreme diversity in environmental conditions. Sobol sensitivity analysis was used to identify the relative importance of input parameters. Physicochemical properties were identified as more influential than environmental parameters on model output. Interactive effects of environmental parameters on P_OV and LRTP occur mainly in combination with chemical properties. Hypothetical chemicals and emission data were used to model P_OV and LRTP for neutral and acidic chemicals with different K_OW/D_OW, vapour pressure and pK_a under different precipitation, wind speed, temperature and soil organic carbon contents (f_OC). Generally for P_OV, precipitation was more influential than the other environmental parameters, whilst temperature and wind speed did not contribute significantly to P_OV variation; for LRTP, wind speed was more influential than the other environmental parameters, whilst the effects of other environmental parameters relied on specific chemical properties. f_OC had a slight effect on P_OV and LRTP, and higher f_OC always increased P_OV and decreased LRTP. Example case studies were performed on real test chemicals using SESAMe to explore the spatial variability of model output and how environmental properties affect P_OV and LRTP. Dibenzofuran released to multiple media had higher P_OV in northwest of Xinjiang, part of Gansu, northeast of Inner Mongolia, Heilongjiang and Jilin. Benzo[a]pyrene released to the air had higher LRTP in south Xinjiang and west Inner Mongolia, whilst acenaphthene had higher LRTP in Tibet and west Inner Mongolia. TCS released into water had higher LRTP in Yellow River and Yangtze River catchments. The initial case studies demonstrated that SESAMe performed well on comparing P_OV and LRTP of chemicals in different regions across China in order to potentially identify the most sensitive regions. This model should not only be used to estimate P_OV and LRTP for screening and risk assessments of chemicals, but could potentially be used to help design chemical monitoring programmes across China in the future.     

Threshold and dose response estimation using the “filter model”

The “filter model” has been developed to explain the biologic effects of radiation and chemicals. We have examined nearly 300 sets of dose response data, of which 50 are presented here. Responses (induced by radiation and chemicals) which have been examined include in vitro survival studies on animal and plant tissues, induction of cellular aberrations and time to tumor or death. Similar data from in vivo studies has also been examined. All of the data appear to fit the model R = a lnD + b(lnD)² + c, where R is the response, a and b are parameters fitted by regression to a particular set of data, and c is the response at zero (or lowest) dose. By writing this model in exponential form, it can be seen that the response R results from multistage filtering (by net amounts a and b) of the initial dose, D. The threshold is obtained from this model as the point, $\text{D}\text{?}{}_{\mathrm{T}}$, at which the second derivative becomes zero. This is given by $\text{D}\text{?}{}_{\mathrm{T}}\text{=}\text{exp}\text{(1 ?}\text{a}\text{2b}\text{)}$ when a and b are oppositelt signed.     

Undisclosed chemicals — implications for risk assessment: A case study from the mining industry

Many of the chemicals used in industry can be hazardous to human health and the environment, and some formulations can have undisclosed ingredients and hazards, increasing the uncertainty of the risks posed by their use. The need for a better understanding of the extent of undisclosed information in chemicals arose from collecting data on the hazards and exposures of chemicals used in typical mining operations (copper, platinum and coal). Four main categories of undisclosed chemicals were defined (incomplete disclosure; chemicals with unspecific identities; relative quantities of ingredients not stated; and trade secret ingredients) by reviewing material safety data sheet (MSDS) omissions in previous studies. A significant number of chemicals (20% of 957 different chemicals) across the three sites had a range of undisclosed information, with majority of the chemicals (39%) having unspecific identities. The majority of undisclosed information was found in commercially available motor oils followed by cleaning products and mechanical maintenance products, as opposed to reagents critical to the main mining processes. All three types of chemicals had trade secrets, unspecific chemical identities and incomplete disclosures. These types of undisclosed information pose a hindrance to a full understanding of the hazards, which is made worse when combined with additional MSDS omissions such as acute toxicity endpoints (LD₅₀) and/or acute aquatic toxicity endpoints (LC₅₀), as well as inadequate hazard classifications of ingredients. The communication of the hazard information in the MSDSs varied according to the chemical type, the manufacturer and the regulations governing the MSDSs. Undisclosed information can undermine occupational health protection, compromise the safety of workers in industry, hinder risk assessment procedures and cause uncertainty about future health. It comes down to the duty of care that industries have towards their employees. With a wide range of chemicals increasingly used, there is a balance that needs to be reached between disclosure requirements, trade secret provisions and definitions of hazardous ingredients for market needs, and the information required to protect the health of their workers.     

Estrogen-, androgen- and aryl hydrocarbon receptor mediated activities in passive and composite samples from municipal waste and surface waters

Passive and composite sampling in combination with in vitro bioassays and identification and quantification of individual chemicals were applied to characterize pollution by compounds with several specific modes of action in urban area in the basin of two rivers, with 400,000 inhabitants and a variety of industrial activities. Two types of passive samplers, semipermeable membrane devices (SPMD) for hydrophobic contaminants and polar organic chemical integrative samplers (POCIS) for polar compounds such as pesticides and pharmaceuticals, were used to sample wastewater treatment plant (WWTP) influent and effluent as well as rivers upstream and downstream of the urban complex and the WWTP. Compounds with endocrine disruptive potency were detected in river water and WWTP influent and effluent. Year-round, monthly assessment of waste waters by bioassays documented estrogenic, androgenic and dioxin-like potency as well as cytotoxicity in influent waters of the WWTP and allowed characterization of seasonal variability of these biological potentials in waste waters. The WWTP effectively removed cytotoxic compounds, xenoestrogens and xenoandrogens. There was significant variability in treatment efficiency of dioxin-like potency. The study indicates that the WWTP, despite its up-to-date technology, can contribute endocrine disrupting compounds to the river. Riverine samples exhibited dioxin-like, antiestrogenic and antiandrogenic potencies. The study design enabled characterization of effects of the urban complex and the WWTP on the river. Concentrations of PAHs and contaminants and specific biological potencies sampled by POCIS decreased as a function of distance from the city.     

Phytoestrogens and mycoestrogens in surface waters — Their sources,occurrence, and potential contribution to estrogenic activity

This review discusses the potential contribution of phytoestrogens and mycoestrogens to in vitro estrogenic activities occurring in surface waters and in vivo estrogenic effects in fish. Main types, sources, and pathways of entry into aquatic environment of these detected compounds were summarized. Reviewed concentrations of phyto/mycoestrogens in surface waters were mostly undetectable or in low ng/L ranges, but exceeded tens of μg/L for the flavonoids biochanin A, daidzein and genistein at some sites. While a few phytosterols were reported to occur at relatively high concentrations in surface waters, information about their potencies in in vitro systems is very limited, and contradictory in some cases. The relative estrogenic activities of compounds (compared to standard estrogen 17β-estradiol) by various in vitro assays were included, and found to differ by orders of magnitude. These potencies were used to estimate total potential estrogenic activities based on chemical analyses of phyto/mycoestrogens. In vivo effective concentrations of waterborne phyto/mycoestrogens were available only for biochanin A, daidzein, formononetin, genistein, equol, sitosterol, and zearalenone. The lowest observable effect concentrations in vivo were reported for the mycoestrogen zearalenone. This compound and especially its metabolites also elicited the highest in vitro estrogenic potencies. Despite the limited information available, the review documents low contribution of phyto/mycoestrogens to estrogenic activity in vast majority of surface waters, but significant contribution to in vitro responses and potentially also to in vivo effects in areas with high concentrations.     

A review of in vitro testing systems applicable to diesel health effects research

In vitro mutagenicity and carcinogenicity testing techniques are currently being used to assess the potential risk to man of exposure to diesel exhaust emissions. This paper examines general considerations of such systems, the types of in vitro tests currently available, the advantages and disadvantages of each cell line and type of test, the limitations of in vitro techniques, the alternative human cell lines that could be utilized for diesel health effects studies, and recommendations for future research employing in vitro methods.     

A novel abbreviation standard for organobromine,organochlorine and organophosphorus flame retardants and some characteristics of the chemicals

Ever since the interest in organic environmental contaminants first emerged 50 years ago, there has been a need to present discussion of such chemicals and their transformation products using simple abbreviations so as to avoid the repetitive use of long chemical names. As the number of chemicals of concern has increased, the number of abbreviations has also increased dramatically, sometimes resulting in the use of different abbreviations for the same chemical. In this article, we propose abbreviations for flame retardants (FRs) substituted with bromine or chlorine atoms or including a functional group containing phosphorus, i.e. BFRs, CFRs and PFRs, respectively. Due to the large number of halogenated and organophosphorus FRs, it has become increasingly important to develop a strategy for abbreviating the chemical names of FRs. In this paper, a two step procedure is proposed for deriving practical abbreviations (PRABs) for the chemicals discussed. In the first step, structural abbreviations (STABs) are developed using specific STAB criteria based on the FR structure. However, since several of the derived STABs are complicated and long, we propose instead the use of PRABs. These are, commonly, an extract of the most essential part of the STAB, while also considering abbreviations previously used in the literature. We indicate how these can be used to develop an abbreviation that can be generally accepted by scientists and other professionals involved in FR related work. Tables with PRABs and STABs for BFRs, CFRs and PFRs are presented, including CAS (Chemical Abstract Service) numbers, notes of abbreviations that have been used previously, CA (Chemical Abstract) name, common names and trade names, as well as some fundamental physico-chemical constants.     

Assessment of the endocrine-disrupting effects of short-chain chlorinated paraffins in in vitro models

Short-chain chlorinated paraffins (SCCPs), which are candidate persistent organic pollutants (POPs) according to the Stockholm Convention, are of great concern because of their persistent bioaccumulation, long-range transport and potential adverse health effects. However, data on the endocrine-disrupting effects of SCCPs remain scarce. In this study, we first adopted two in vitro models (reporter gene assays and H295R cell line) to investigate the endocrine-disrupting effects of three SCCPs (C10-40.40%, C10-66.10% and C11-43.20%) via receptor mediated and non-receptor mediated pathway. The dual-luciferase reporter gene assay revealed that all test chemicals significantly induced estrogenic effects, which were mediated by estrogen receptor α (ERα), in the following order: C11-43.20% > C10-66.10% > C10-40.40%. Notably, C10-40.40% and C10-66.10% also demonstrated remarkable anti-estrogenic activities. Only C11-43.20% showed glucocorticoid receptor-mediated (GR) antagonistic activity, with a RIC₂₀ value of 2.6 × 10^− 8 mol/L. None of the SCCPs showed any agonistic or antagonistic activities against thyroid receptor β (TRβ). Meanwhile, all test SCCPs stimulated the secretion of 17β-estradiol (E₂). Both C10-66.10% and C11-43.20% increased the production of cortisol at a high level in H295R cell lines. In order to explore the possible mechanism underlying the endocrine-disrupting effects of SCCPs through the non-receptor pathway, the mRNA levels of 9 steroidogenic genes were measured by real-time polymerase chain reaction (RT-PCR). StAR, 17βHSD, CYP11A1, CYP11B1, CYP19 and CYP21 were upregulated in a concentration-dependent manner by all chemicals. The data provided here emphasized that comprehensive assessments of the health and ecological risks of emerging contaminants, such as SCCPs, are of great concern and should be investigated further.     

Screening of hormone-like activities in bottled waters available in Southern Spain using receptor-specific bioassays

Bottled water consumption is a putative source of human exposure to endocrine-disrupting chemicals (EDCs). Research has been conducted on the presence of chemicals with estrogen-like activity in bottled waters and on their estrogenicity, but few data are available on the presence of hormonal activities associated with other nuclear receptors (NRs). The aim of this study was to determine the presence of endocrine activities dependent on the activation of human estrogen receptor alpha (hERa) and/or androgen receptor (hAR) in water in glass or plastic bottles sold to consumers in Southern Spain. Hormone-like activities were evaluated in 29 bottled waters using receptor-specific bioassays based on reporter gene expression in PALM cells [(anti-)androgenicity] and cell proliferation assessment in MCF-7 cells [(anti-)estrogenicity] after optimized solid phase extraction (SPE). All of the water samples analyzed showed hormonal activity. This was estrogenic in 79.3% and anti-estrogenic in 37.9% of samples and was androgenic in 27.5% and anti-androgenic in 41.3%, with mean concentrations per liter of 0.113 pM 17β-estradiol (E₂) equivalent units (E₂Eq), 11.01 pM anti-estrogen (ICI 182780) equivalent units (ICI 182780Eq), 0.33 pM methyltrienolone (R1881) equivalent units (R1881Eq), and 0.18 nM procymidone equivalent units (ProcEq). Bottled water consumption contributes to EDC exposure. Hormone-like activities observed in waters from both plastic and glass bottles suggest that plastic packaging is not the sole source of contamination and that the source of the water and bottling process may play a role, among other factors. Further research is warranted on the cumulative effects of long-term exposure to low doses of EDCs.     

Endocrine activity of persistent organic pollutants accumulated in human silicone implants — Dosing in vitro assays by partitioning from silicone

Persistent organic pollutants (POPs) accumulated in human tissues may pose a risk for human health by interfering with the endocrine system. This study establishes a new link between actual human internal POP levels and the endocrine active dose in vitro, applying partitioning-controlled dosing from silicone to the H295R steroidogenesis assay: (1) Measured concentrations of POPs in silicone breast implants were taken from a recent study and silicone disks were loaded according to these measurements. (2) Silicone disks were transferred into H295R cell culture plates in order to control exposure of the adrenal cells by equilibrium partitioning. (3) Hormone production of the adrenal cells was measured as toxicity endpoint. 4-Nonylphenol was used for method development, and the new dosing method was compared to conventional solvent-dosing. The two dosing modes yielded similar dose-dependent hormonal responses of H295R cells. However, with the partitioning-controlled freely dissolved concentrations (C_free) as dose metrics, dose–response curves were left-shifted by two orders of magnitude relative to spiked concentrations. Partitioning-controlled dosing of POPs resulted in up to 2-fold increases in progestagen and corticosteroid levels at C_free of individual POPs in or below the femtomolar range. Silicone acted not only as source of the POPs but also as a sorption sink for lipophilic hormones, stimulating the cellular hormone production. Methodologically, the study showed that silicone can be used as reference partitioning phase to transfer in vivo exposure in humans (silicone implants) to in vitro assays (partition-controlled dosing). The main finding was that POPs at the levels at which they are found in humans can interfere with steroidogenesis in a human adrenocortical cell line.     

Influence of environment on insulin sensitivity

Genetic and environmental factors influence insulin sensitivity (IS) during one's lifetime. Actually, uterine environment may affect IS at birth and later in life. In particular, various exogenous toxic substances, coupled to a genetic predisposition, may remarkably influence the regulation of the hypothalamus–hypophysis–adrenal gland axis, and the production or the activity of insulin, cerebral incretins, pro-inflammatory cytokines, and placental hormones. Owing to this reaction against environmental injuries, fetal growth and endocrine system development may be impaired, leading to low or large birth weight, or prematurity. Reduced growth in early life has been related to insulin resistance, which can be silent for years and evident in predisposed adults. The incidence of type 2 diabetes mellitus and obesity associated with sedentary lifestyle patterns and inadequate dieting behaviors in children and adolescents has rapidly increased during the last decade.Recent evidences suggest that the Pro12Ala polymorphism of the peroxisome proliferator-activated receptor-? (PPAR-?) gene and the angiotensin converting enzyme (ACE) I/D gene polymorphism combined with environmental factors, such as phthalates interfering with the post receptorial action of insulin, alter insulin-sensible tissues. Therefore, IS, deriving from a complex interaction between genotype and environment, may change during life and depends on previous metabolic control, which is a sort of metabolic memory. The goal for the future is preventing the complications associated with impaired IS through the control of exogenous factors and the use of drugs selectively effective on its pathogenesis.     

Occurrence,fate and ecological risk of five typical azole fungicides as therapeutic and personal care products in the environment: A review

Azole fungicides are widely used to treat fungal infection in human. After application, these chemicals may reach to the receiving environment via direct or indirect discharge of wastewaters, thus posing potential risks to non-target organisms. We aimed to review the occurrence, fate and toxicological effects of some representative household azole fungicides in the environment. Azole fungicides were widely detected in surface water and sediment of the aquatic environment due to their incomplete removal in wastewater treatment plants. These chemicals are found resistant to microbial degradation, but can undergo photolysis under UV irradiation. Due to different physiochemical properties, azole fungicides showed different environmental behaviors. The residues of azole fungicides could cause toxic effects on aquatic organisms such as algae and fish. The reported effects include regulation changes in expression of cytochrome P450-related genes and alteration in CYP450-regulated steroidogenesis causing endocrine disruption in fish. Further studies are essential to investigate the removal of azole fungicides by advanced treatment technologies, environmental fate such as natural photolysis, and toxic pathways in aquatic organisms.     

Usefulness and uses of climate forecasts for agricultural extension in South Carolina,USA

Farmers and extensionists can use forecasts about agro-climatic conditions to reduce risks of agricultural production. Eighteen extension agents, researchers, consultants, and farmers provided feedback about decision support tools that utilize such forecasts during focus groups that were conducted in Florence, South Carolina on January 14, 2011. Climate Risk and County Yield Database were the tools most selected as potentially useful for agricultural extension in South Carolina. An irrigation scheduler was the most frequently mentioned tool to be developed. Also, a survey of Clemson University’s extension personnel was conducted in January and February 2011 to assess interest of South Carolina’s growers and producers in using climate forecasts, eleven potential uses of climate forecasts by extension’s clientele, and potential usefulness to extensionists of twelve specific forecasts. Clemson’s extensionists represent approximately 97 % of the state’s agricultural extensionists. They are more likely than not to agree that growers and producers are interested in using climate forecasts. Most of the state’s extension personnel also think that farmers could use a climate forecast to improve irrigation management and planting schedules. A majority of the state’s extensionists thinks that a freeze alert could be useful to them and the proportion that thinks the forecast could be useful exceeds the proportion that thinks any other forecast could be useful. Most extensionists also think that a forecast of plant moisture stress could be useful to help farmers schedule irrigation. The key survey results are remarkably similar to those from surveys of extension personnel at North Carolina State University in early 2009 and University of Florida in late 2004.     

Linking high resolution mass spectrometry data with exposure and toxicity forecasts to advance high-throughput environmental monitoring

There is a growing need in the field of exposure science for monitoring methods that rapidly screen environmental media for suspect contaminants. Measurement and analysis platforms, based on high resolution mass spectrometry (HRMS), now exist to meet this need. Here we describe results of a study that links HRMS data with exposure predictions from the U.S. EPA's ExpoCast™ program and in vitro bioassay data from the U.S. interagency Tox21 consortium. Vacuum dust samples were collected from 56 households across the U.S. as part of the American Healthy Homes Survey (AHHS). Sample extracts were analyzed using liquid chromatography time-of-flight mass spectrometry (LC–TOF/MS) with electrospray ionization. On average, approximately 2000 molecular features were identified per sample (based on accurate mass) in negative ion mode, and 3000 in positive ion mode. Exact mass, isotope distribution, and isotope spacing were used to match molecular features with a unique listing of chemical formulas extracted from EPA's Distributed Structure-Searchable Toxicity (DSSTox) database. A total of 978 DSSTox formulas were consistent with the dust LC–TOF/molecular feature data (match score ≥ 90); these formulas mapped to 3228 possible chemicals in the database. Correct assignment of a unique chemical to a given formula required additional validation steps. Each suspect chemical was prioritized for follow-up confirmation using abundance and detection frequency results, along with exposure and bioactivity estimates from ExpoCast and Tox21, respectively. Chemicals with elevated exposure and/or toxicity potential were further examined using a mixture of 100 chemical standards. A total of 33 chemicals were confirmed present in the dust samples by formula and retention time match; nearly half of these do not appear to have been associated with house dust in the published literature. Chemical matches found in at least 10 of the 56 dust samples include Piperine, N,N-Diethyl-m-toluamide (DEET), Triclocarban, Diethyl phthalate (DEP), Propylparaben, Methylparaben, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), and Nicotine. This study demonstrates a novel suspect screening methodology to prioritize chemicals of interest for subsequent targeted analysis. The methods described here rely on strategic integration of available public resources and should be considered in future non-targeted and suspect screening assessments of environmental and biological media.     

Chemical contaminants in swimming pools: Occurrence,implications and control

A range of trace chemical contaminants have been reported to occur in swimming pools. Current disinfection practices and monitoring of swimming pool water quality are aimed at preventing the spread of microbial infections and diseases. However, disinfection by-products (DBPs) are formed when the disinfectants used react with organic and inorganic matter in the pool. Additional chemicals may be present in swimming pools originating from anthropogenic sources (bodily excretions, lotions, cosmetics, etc.) or from the source water used where trace chemicals may already be present. DBPs have been the most widely investigated trace chemical contaminants, including trihalomethanes (THMs), haloacetic acids (HAAs), halobenzoquinones (HBQs), haloacetonitriles (HANs), halonitromethanes (HNMs), N-nitrosamines, nitrite, nitrates and chloramines. The presence and concentrations of these chemical contaminants are dependent upon several factors including the types of pools, types of disinfectants used, disinfectant dosages, bather loads, temperature and pH of swimming pool waters. Chemical constituents of personal care products (PCPs) such as parabens and ultraviolet (UV) filters from sunscreens have also been reported. By-products from reactions of these chemicals with disinfectants and UV irradiation have been reported and some may be more toxic than their parent compounds. There is evidence to suggest that exposure to some of these chemicals may lead to health risks. This paper provides a detailed review of various chemical contaminants reported in swimming pools. The concentrations of chemicals present in swimming pools may also provide an alternative indicator to swimming pool water quality, providing insights to contamination sources. Alternative treatment methods such as activated carbon filtration and advanced oxidation processes may be beneficial in improving swimming pool water quality.     

Distribution of persistent organic pollutants in serum,omental, and parietal adipose tissue of French women with deep infiltrating endometriosis and circulating versus stored ratio as new marker of exposure

Several studies have assessed the potential role of environmental chemicals in the onset, growth, and/or physiopathology of endometriosis. However, their contour in terms of considered exposure markers remains limited. The present study aimed to characterize the internal exposure levels of 78 persistent organic pollutants (POPs, including dioxins, polychlorobiphenyls, brominated flame retardants and organochlorine pesticides) in a set of 113 adult French women (45 controls, 68 cases), and to characterize the distribution of these POPs within three biological compartments (omental adipose tissue, parietal adipose tissue, and serum). For all targeted substances, the correlation between the concentrations measured in omental versus parietal adipose tissue was found strongly significant (p < 0.0001). An equivalence of the measures performed in parietal and omental adipose tissue was moreover observed with median levels of 6.4 vs. 7.4 pg/g l.w. for WHO-TEQ₂₀₀₅ PCDD/F, 4.5 vs. 4.7 pg/g l.w. for WHO-TEQ₂₀₀₅ dl-PCB, 137.1 vs. 147.9 ng/g l.w. for sum of 6 ndl-PCB, and 2.1 vs. 2.0 ng/g l.w. for sum of 7 i-PBDE, respectively. The same observation was made for individual targeted OCs compounds. Significant correlations were also observed between these concentrations determined in adipose tissue and those measured in serum for dioxins (WHO-TEQ₂₀₀₅ PCDD/F = 6.1 pg/g l.w), PCBs (WHO-TEQ₂₀₀₅ dl-PCB = 3.6 pg/g l.w., sum of 6 ndl-PCB = 81.1 ng/g l.w.), and brominated flame-retardants (sum of 7 i-PBDE = 0.9 ng/g l.w.). The circulating versus stored ratio of some exposure markers (Sum PCDDs, 1,2,3,6,7,8-HxCDF, slightly versus highly chlorinated PCBs ratio, PBDE 99 and PBB 153) was found statistically different for control and case individuals. These extended exposure data from deep infiltrating endometriosis patients are the first ones available for France and give a new insight about the equilibrium of chemicals between storage and circulating compartments that should be further considered as new marker of exposure in the context of exposure-health relationship studies.