Evaluation of Mass-Transfer Coefficient of Free Fall – Cascade-Aerator

The mass-transfer coefficient of a free-fall cascade-aeratorunit of 15 million litres per day was evaluated for its efficiency in the removal of a class of volatile organics, the trihalomethanes(THMs). These compounds are carcinogenic and occur as a resultof chlorination of natural waters. Due to the volatile nature ofthe THMs, the efficiency of aeration as a potential techniquefor their removal has been studied. The principle behindaeration is gas-transfer, according to which the gas-liquidinterface is hypothesized to consist of a gas and liquid filmthrough which gas is transferred by molecular diffusion untilequilibrium is attained. The overall mass transfer coefficient(K _L) of the aerator considering oxygen as the reference compound, was found to be29.3 hr^-1 for THMs.     

Simulation of impact of oil spill in the ocean – a case study of Arabian Gulf

To meet the growing energy demand worldwide, oil and gas exploration and production activities have increased rapidly both in onshore and offshore areas. The produced oil from the ocean bed is transported onshore either by ship or pipeline. This has increased the risk of oil spill in the coastal area. In order to prepare an emergency preparedness plan and to assess the magnitude of risk involved in transporting and offloading oil, oil spill simulation studies play an important role. This paper describes a simulation of oil spill in coastal bay of Arabian Gulf where new developments are taking place using MIKE 21 model. The developments include a diesel based thermal power plant near Sir Baniyas Island, which is an ecological fragile area. Based on the project activity, two probable scenarios, one for diesel leak (250 m3/h) for 1 h and the other for instantaneous spill (500 m3) are considered. The MIKE 21 model was calibrated for hydrodynamics using measured field data followed by diesel-spill simulation to track its movement in the Arabian Gulf. The results for both leak and instantaneous spill indicate that spilled diesel will not move towards the Sir Banyas Island and more than 45% of the diesel will be evaporated within 48 h of oil spill. Based on the results, a clean up and contingency plan is proposed to mitigate the adverse impacts arising due to diesel spill in the study area.     

Analysis of heavy metal concentrations in sediments of selected estuaries of Malaysia—a statistical assessment

Statistical analysis of heavy metal concentrations in sediment was studied to understand the interrelationship between different parameters and also to identify probable source component in order to explain the pollution status of selected estuaries. Concentrations of heavy metals (Cu, Zn, Cd, Fe, Pb, Cr, Hg and Mn) were analyzed in sediments from Juru and Jejawi Estuaries in Malaysia with ten sampling points of each estuary. The results of multivariate statistical techniques showed that the two regions have different characteristics in terms of heavy metals selected and indicates that each region receives pollution from different sources. The results also showed that Fe, Mn, Cd, Hg, and Cu are responsible for large spatial variations explaining 51.15% of the total variance, whilst Zn and Pb explain only 18.93 of the total variance. This study illustrates the usefulness of multivariate statistical techniques for evaluation and interpretation of large complex data sets to get better information about the heavy metal concentrations and design of monitoring network.     

Evaluation of environmental impacts of Integrated Industrial Estate��Pantnagar through application of air and water quality indices

Large-scale industrialization, population inflow, and rapid urbanization coupled with unfavorable meteorological conditions often induce significant degradation of urban environment. In order to assess the extent of environmental impacts due to establishment of the Integrated Industrial Estate??Pantnagar (IIE-Pantnagar), ambient air and groundwater were monitored from June 2007 to May 2008. Collected baseline information was normalized and interpreted with the application of air (AQI) and water quality indices (WQI). Among the pre-identified air pollutants, suspended particulate matter was found to be the principal culprit to deteriorate ambient air quality, with a maximum annual concentration of 418.5 ??g/m³. Monthly average concentrations of respirable particulate matter (aerodynamic diameter < 10 ??m) also persist at a critical level with an annual maximum of 207.3 ??g/m³. A segmented linear function with maximum operator concept was used to compute AQI, and the developed index was found well suitable to demonstrate temporal variations of ambient air quality. The computed AQI value for the selected study region varied from moderate (97.0) to very poor pollution level (309.2) in respect to developed air quality standards. Furthermore, an integrated WQI was developed comprising 9 parameters, and among all the 10 pre-identified locations, the average groundwater quality was found acceptable in terms of Indian drinking water standards. The maximum WQI (70.6) was found at the Kichha Railway Station during summer months, revealing moderate pollution load. Industrial discharge from IIE-Pantnagar coupled with other industrial setup may hold responsible for such kind of degradation of water quality. In contrast, WQI computed at Rudrapur City demonstrate minimum (15.0?C22.1) pollution load. For 95% of the monitoring period, the computed WQI was found acceptable for all selected locations with few exceptions. The application of WQI to assess temporal variations in groundwater quality was therefore found satisfactory.     

Time trend of Butyl- and Phenyl-Tin contamination in organisms of the Lagoon of Venice (1999–2003)

In the period 1999-2003 a monitoring study on the accumulation of organotin compounds in edible organisms in the Lagoon of Venice was conducted. Butyl and Phenyl derivatives were determined in pooled samples of Mytilus galloprovincialis and Tapes spp. with the aims of assessing organotin contamination in the Lagoon of Venice in the period just preceding their ban in Europe, monitoring the concentrations in organisms with a high commercial use, evaluating a potential hazard for human health due to seafood and identifying the possible contamination sources. Sampling stations (up to 20) were distributed around the Lagoon and particularly concentrated in the area close to the town of Chioggia. Significantly higher (analysis of variance (ANOVA), p < 0.05) tributyltin (TBT) concentrations were found in mussels (from 38 +/- 8 to 6,666 +/- 1,333 microg kg(-1) d.w., as TBT(+)), than in clams (from 6 +/- 1 to 2,256 +/- 451 microg kg(-1) d.w., as TBT(+)). During the 3 years of the survey no increase in average concentrations of the butyltin compounds (tributyltin (TBT) + dibutyltin (DBT) + monobutyltin (MBT)) was observed (ANOVA, p > 0.05) in either species. Furthermore, by analyzing the entire data set, it is evident that most stations show analogous concentrations in the 3 years for both species, whereas few have anomalously higher concentrations. If organotin concentrations in specimens from some sites are compared with the Tolerable Average Residue Level, a possible risk for human health must be considered.     

“Emission game”: some applications of the theory of games to the problem of CO2 emission

If there are no doubts that we must reduce the total emission of carbon dioxide, then the problem of how much different countries should be allowed to contribute to this amount remains a serious one. We suggest this problem to be considered as a non-antagonistic game (in Germeier's sense). A game of this kind is called an “emission game”. Suppose that there are n independent actors (countries or regions), each of them releasing a certain amount of CO₂ per year (in carbon units) into the atmosphere, and that the emission would be reduced by each actor. Each actor has his own aim: to minimise the loss in the Gross Domestic Product (GDP) caused by the reduction of emissions. On the other hand, taking into account that it is impossible to estimate more or less precisely the impact of the climate change on GDP for each country today, a common strategy will be to reduce the climate change. Since one of the main leading factors in global warming is the greenhouse effect, then the common aim will be to reduce the sum of emissions. This is a typical conflict situation. How to resolve it? We can weigh the “egoistic” and “altruistic” criteria for each actor introducing the so-called “coefficients of egoism”. This coefficient is very large, if the actor uses a very egoistic strategy, and conversely, if the actor is a “super-altruist”, then the corresponding coefficient is very small. Using these coefficients we get the general solution of the game in a form of some Pareto's equilibrium. The solution is stable and efficient.     

Analysis of acidic components, heavy metals and PAHS of particulate in the Changwon–Masan area of Korea

This study is an analysis of the concentrations and components of heavy metals in PM_2.5 and the total suspended particulate (TSP) collected at a mechanical industrial complex (IC) site in Changwon and at a residential site in Masan, Korea. Particulate was collected during two sampling periods, from the late summer to the early fall and from the middle to late fall, at the IC site and one sampling period, from the middle fall to the early winter, at the residential site. PM_2.5 and TSP samples were taken by an annular denuder system and a hi-volume air sampler, respectively. The authors also identified the concentrations and components of heavy metals extracted from the PM_2.5 and TSP filters, the acidic components extracted from the PM_2.5 filters, and the polycyclic aromatic hydrocarbons (PAHs) extracted from polyurethane foam (PUF) plug. The average concentrations of the PM_2.5 collected at the IC and residential sites were very similar. Major sources of PM_2.5 at the study sites, however, were air emissions from vehicles and industry as well as emissions from residential heating and soil origins, respectively. The higher concentrations of the TSP at the IC site, as compared to those at the residential site, were due to either increased suspended dust from vehicle emissions or re-suspended road dust because of increased vehicle speeds near the IC site. Heavy metal concentrations in the TSPs were higher than those in the PM_2.5. The heavy metal concentrations in the PM_2.5 and TSP at the IC site with heavy traffic were substantially greater than those at the residential site. The concentrations of TSP and heavy metals and PAHs in PM during the period of the middle to late fall was much higher than those during the period of the late summer to early fall at the IC site. This is because of the difference in meteorological characteristics and energy uses between two periods. The residential site also showed higher concentrations of acidic anions while the IC site showed higher concentrations of acidic cation. Secondary aerosols or particulates, such as ammonium nitrate or ammonium nitrite, might have been important constituents of the PM_2.5 at the residential site. The PAHs in the TSP collected at the IC site was greatly affected by traffic and industry emissions consisting mostly of high molecular weight PAHs with two to four rings. PAHs in the TSP at the site, however, were affected by residential heating and air emissions from small chemical plants having higher concentrations of low molecular weight PAHs with five to six rings.     

Comparison of Noniterative Algorithms Based on Different Forms of Richards’ Equation

Through linearizing an implicit differencing scheme, several noniterative numerical solutions of Richards’ equation in different forms are derived here. Paniconi et al. (Water Resources Research, 27(6), 1147–1163, 1991) have developed a first-order accurate linearization of the head-based Richards’ equation (RE) and a second-order accurate linearization of the implicit-factored head-based RE. Considering other forms of RE, we propose a second-order accurate linearization of the moisture-based RE and a second-order accurate linearization of the mixed form RE combined with the primary variable switching technique. Extensive comparisons between the noniterative solutions are conducted through three numerical experiments. Their accuracies, efficiencies, and mass balance behaviors are analyzed. The results indicate that the first-order accurate scheme is not efficient compared to iterative models. The noniterative schemes of head-based RE suffer from the mass imbalance problem without iteration. The linearized moisture-based RE can obtain mass conservative, accurate results effectively, while it may confront numerical problems when the soil approaches saturation. Among these noniterative schemes, the linearized mixed form RE combined with the primary variable switching technique is superior in terms of accuracy, mass balance, and efficiency compared to traditional iterative methods.     

Assessment of dietary intakes of nineteen pesticide residues among five socioeconomic sections of Hyderabad—a total diet study approach

Total diet study approach was used to assess the dietary intakes of pesticide residues among the select population in Hyderabad. When assessed by a food frequency questionnaire, it was found that the food intakes varied among five socioeconomic sections (SES). Therefore, we intended to compare the intakes of pesticide residues through these foods among the five SES. A total of 195 foods from different markets were collected and analyzed for 19 pesticides. The residues were analyzed with a gas chromatograph and were confirmed with mass spectrometry. About 51 % of the samples were detected with one or more residues. Thirteen out of the 19 residues were present in levels above detection limits in various concentrations. The median concentrations of the residues in all the samples tested, ranged from 0.00010 to 0.33 mg/kg. Highest median concentration was for β-HCH in water samples. Exposures to all the residues were below the respective ADIs at both mean and 95th percentile levels of food intakes with highest estimated dietary intakes (EDIs) of β-HCH in both the cases. The EDIs of β-HCH were the highest among all the residues at both the intake levels among all the SES. The EDIs of β-HCH were significantly higher in lower SES than higher SES possibly due to the consumption of rice cooked in water contaminated with β-HCH. EDIs for other residues did not differ significantly among the five SES.     

Speciation of Trace Metals in Coastal Sediments of El-Mex Bay South Mediterranean Sea–West of Alexandria (Egypt)

Sediments of El-Mex Bay estuary on the southern Mediterranean Sea have been analyzed for trace metals after sediment fractionation by sequential leaching. A sequential extraction procedure was applied to identify forms of Mn, Cu, Cd, Cr, Zn and Fe. The five steps of the sequential extraction procedure partitioned metals into: CH₃COONH₄ extractable (F1); NaOAC carbonate extractable (F2); NH₂OH.HCl/CH₃COOH reducible extractable (F3); H₂O₂–HNO₃ organic extractable (F4) and NHO₃/HClO₄/HF acid soluble residue (F5). Extracted concentrations of trace metals analyzed after all five steps, were found to be (μg/g) for Mn: 1930.2, Cu: 165.3, Cd: 60.9, Cr: 386.3, Zn: 2351.3 and Fe: 10895. Most of elements were found in reducible fraction except Fe found in acid soluble residue, characterizing stable compounds in sediments. Labile (non-residual) fractions of trace elements (sum of the first four fractions) were analyzed because they are more bioavailable than the residual amount. Correlation analysis was used to understand and visualize the associations between the labile fractions of trace metals and certain forms, since Fe-and Mn-oxides play an important role in trace metals sorption within aquatic systems, especially within El-Mex Bay sediments that characterized by varying metal bioavailability.     

Development of the concept of spatial–temporal mask for testing effects of discharge from well-drilling activities on biological communities

This paper describes the use of Bayesian spatial models to develop the concept of a spatial–temporal mask for the purpose of identifying regions in which before and after drilling effects are most clearly defined and from which the consequences of exposure of macrofauna and meiofauna to the release of drilling discharges can be evaluated over time. To determine the effects of drilling fluids and drill-cuttings on the marine benthic community, it is essential to know not only where discharged materials ended up within the possible impact area, but also the chemical concentrations to which biota were exposed during and after drilling. Barium and light hydrocarbons were used as chemical tracers for water-based and non-aqueous-based fluids in a shallow water site in the Campos Basin, off the coast of Brazil. Since the site showed evidence of exposure to waste material from earlier drilling, the analysis needed to take into account the background concentrations of these compounds. Using the Bayesian models, concentrations at unsampled sites were predicted and regions altered and previously contaminated were identified.     

Assessment of hydrogeochemical characteristics of groundwater in parts of Hindon–Yamuna interfluve region,Baghpat District,Western Uttar Pradesh

The present study has been carried out to assess groundwater quality in parts of Hindon–Yamuna interfluve region of western Uttar Pradesh. Fifty-five groundwater samples were collected from hand pumps in post-monsoon 2005 and pre-monsoon 2006 period, respectively, covering an area of about 1,345 km². Physical and chemical parameters of groundwater such as electrical conductivity, pH, total dissolved solid, Na, K, Ca, Mg, HCO₃, Cl, and SO₄ were determined. Concentration of the chemical constituents in groundwater of the study area varies spatially and temporarily. Interpretation of analytical data of major ion chemistry helps to identify three chemical types of groundwater i.e. ‘mixed’, ‘mixed bicarbonate’ and ‘alkali bicarbonate’ types. The species likely to occur in groundwater of the study area are Ca-HCO₃, Mg-HCO₃, Ca-SO₄, Na-Cl, Na-SO₄, Na-HCO₃, K-Cl, and some other possible species of K, depending on its abundance. The groundwater of the study area comes under the category of moderately hard to very hard, mildly acidic to slightly alkaline in nature. There is anomalously high concentration of major ions, particularly, Na, K, SO₄, and Cl. High SO₄ and K values may be related to anthropogenic influences, rather than through some natural process. Sodium along with Cl may be added to the system through sewage pollution and leachate percolation.     

Effect of 30 years of road traffic abandonment on epiphytic moss diversity

Road traffic emits a cocktail of pollutants that can influence the vegetation and plant diversity in neighboring areas. However, the recovery potential of bryophytes after traffic abandonment is still little explored. In addition, the effects of the main pollutants of road verges, such as metals and salinity, on moss flora need to be investigated. In our study, we compared the moss richness and diversity in two closely related veteran tree allees of high conservation importance. The allees in Gry?ów and Lubrza, Poland, were chosen because of their similarity in age, geographical location, type of surrounding areas, and tree species. The only difference was that the trees in Gry?ów had not been exposed to direct road pollution for almost 30 years. The moss richness and diversity differed significantly between the sites. Altogether, 20 moss species were recorded on 229 trees, 17 species in Gry?ów (abandoned road), and 13 in Lubrza (busy road). We found considerable differences between moss cover on the road-facing and opposite sides of tree trunks. In Lubrza, mosses on the road-facing side were very scarce. The moss cover in Gry?ów was highly balanced between trunk sides as well as among trunk heights. Typical epiphytic species such as Bryum moravicum, Dicranoweisia cirrata, Leskea polycarpa, and Orthodicranum tauricum preferred the Gry?ów tree stands, where they were present in numbers almost twice as high as that at Lubrza. The study shows that constructing a bypass road could be an effective conservation measure for veteran tree protection with their epiphytic moss flora.     

Extraction of soil solution by drainage centrifugation—effects of centrifugal force and time of centrifugation on soil moisture recovery and solute concentration in soil moisture of loess subsoils

The solute concentration in the subsoil beneath the root zone is an important parameter for leaching assessment. Drainage centrifugation is considered a simple and straightforward method of determining soil solution chemistry. Although several studies have been carried out to determine whether this method is robust, hardly any results are available for loess subsoils. To study the effect of centrifugation conditions on soil moisture recovery and solute concentration, we sampled the subsoil (1.5–3.0 m depth) at commercial farms in the loess region of the Netherlands. The effect of time (20, 35, 60, 120 and 240 min) on recovery was studied at two levels of the relative centrifugal force (733 and 6597g). The effect of force on recovery was studied by centrifugation for 35 min at 117, 264, 733, 2932, 6597 and 14,191g. All soil moisture samples were chemically analysed. This study shows that drainage centrifugation offers a robust, reproducible and standardised way for determining solute concentrations in mobile soil moisture in silt loam subsoils. The centrifugal force, rather than centrifugation time, has a major effect on recovery. The maximum recovery for silt loams at field capacity is about 40%. Concentrations of most solutes are fairly constant with an increasing recovery, as most solutes, including nitrate, did not show a change in concentration with an increasing recovery.     

Design and assembly of an experimental laboratory for the study of atmosphere–plant interactions in the system of fumigation chambers

A 5-day biochemical oxygen demand (BOD(5)) test has been used as the standard measurement of organic pollution in rivers worldwide. However, it may be argued that BOD is not a sufficient indicator of organic pollution when nitrogenous biochemical oxygen demand (NBOD) is present in water samples. In this study, BOD, NBOD, and carbonaceous biochemical oxygen demand (CBOD) of treated sewage effluent (TSE) were measured near at the discharge outlet of 3 sewage treatment plants (STPs) in Sakai, Itachi, and Kashio rivers in Central Japan. Additional measurements were conducted at one point upstream and two points downstream from the STP discharge points in the rivers. It was estimated that NBOD values in the TSE of Sakai River, Kashio River and Itachi River accounted for 54%, 69% and 18% of their BOD values, respectively. Respective NH4+ and NO2- concentrations were positively correlated with those of NBOD values in Sakai, Itachi, and Kashio rivers. The BOD loads from the TSE were estimated to be 2.2, 5.7, and 1.2 times higher than the CBOD loads in the Sakai, Itachi, and Kashio rivers, respectively. The variation of the portion of NBOD values of each TSE, as well as the ratios of CBOD to BOD loads, was attributed to the difference in each STP system. Consequently, the NH4+ and NO2- of TSE led to the increase of NBOD in the Sakai River basin.     

Status of Heavy Metals in Water and Bed Sediments of River Gomti – A Tributary of the Ganga River, India

The concentrations of cadmium, chromium, copper, iron, lead, manganese, nickel, and zinc in water and bed sediments of river Gomti have been studied in a fairly long stretch of 500 km from Neemsar to Jaunpur. Grab samples of water (October 2002–March 2003) and bed sediments (December 2002 and March 2003) were collected from 10 different locations following the standard methods. The river water and sediment samples were processed and analyzed for heavy metals viz., Cd, Cr, Cu, Fe, Pb, Mn, Ni, and Zn, and using ICP-AES. The heavy metals found in the river water were in the range: Cd (0.0001–0.0005 mg/L); Cr (0.0015–0.0688 mg/L); Cu (0.0013–0.0.0043 mg/L); Fe (0.0791–0.3190 mg/L); Mn (0.0038–0.0.0973 mg/L); Ni (0.0066–0.011 mg/L); Pb (0.0158–0.0276 mg/L); and Zn (0.0144–0.0298 mg/L) respectively. In the sediments the same were found in the range: Cd (0.70–7.90 g/g); Cr (6.105–20.595 g/g); Cu (3.735–35.68 g/g); Fe (5051.485–8291.485 g/g); Mn (134.915–320.45 g/g); Ni (13.905–37.370 g/g); Pb (21.25–92.15 g/g); and Zn (15.72–99.35 g/g) of dry weight respectively. Some physico-chemical parameters viz., pH, total solids, total dissolved solids, total suspended solids, dissolved oxygen, biological oxygen demand, chemical oxygen demand, hardness etc. were estimated as these have direct or indirect influence on the incidence, transport and speciation of the heavy metals. Based on the geoaccumulation indices, the Gomti river sediments from Neemsar to Jaunpur are considered to be unpolluted with respect to Cr, Cu, Fe, Mn, and Zn. It is unpolluted to moderately polluted with Pb. In case of Cd it varies from moderately polluted to highly polluted. As far as Ni is concerned the sediment is very highly polluted at Barabanki and Jaunpur D/s. No correlation was found between enrichment factor and geoaccumulation index.     

Numerical Modeling of Flow Fields and Dispersion of Passive Pollutants in the Vicinity of the Temelín Nuclear Power Plant

This study deals with numerical simulation of flow fields and dispersion of model passive admixtures in the planetary boundary layer in a 10 × 10 km square area, centered on the Czech Republic’s Temelín Nuclear Power Plant. Numerical calculations of three-dimensional flow fields with eight basic wind directions given for the inlet boundary of the computational domain are performed using the FLUENT CFD code with the standard k – ε turbulence model. The resultant modeling of the flow fields provides information as to probable local directions and velocities of flow vectors on a horizontal scale of 100 m, which are consistent with the data given for the boundaries of the calculation area in the framework of a scale of 10 km. The modeled flow fields generate the input data for related Lagrangian simulation of the ground concentration and deposition fields of passive particles assumedly emitted at the site of the Temelín plant. Simulated plumes describe eight cases of potential ground-level distribution of model passive admixtures in the area.     

Monitoring the quality of groundwater on the bank of Uyyakondan channel of river Cauvery at Tiruchirappalli, Tamil Nadu??India

The groundwater quality on the banks of Uyyakondan channel of Cauvery at Tiruchirappalli was studied. Two groundwater samples were taken near the bank of the channel on both sides and the other two samples were taken nearly 0.5 km away from the channel at ten stations. The study was carried out every year over a period of 3 years from December 2001-December 2003. The samples were subjected to physico-chemical analysis. The results showed that most of the physico-chemical parameters were in higher concentrations at most of the groundwater stations.     

Risk Analysis of Invasive Species Introduction in the Port of Arzew,by Calculation of Biofouling Surface on Ships’ Hulls

Historically, the biofouling of ships’ hulls has always been considered amongst the oldest mechanisms causing the introduction of marine invasive species. However, in the last few decades, studies have been oriented mainly towards the introduction of non-indigenous species via ballast water, at the expense of biofouling. In this study, an alternative approach that deals with this latter parameter as the main factor of the introduction of marine organisms is proposed. The biofouling surface area of all vessels which have made call at Arzew port in Algeria is calculated over a period of one year (2014). This parameter indicates the importance of the pressure of propagule that corresponds to the successful introduction effort of a species, since it is this submerged surface of the ship that hosts organisms and spreads them all over the world. We associate to each calculated biofouling surface a bioregion of origin, as well as other parameters such as the number of vessels, their maritime routes and the environmental similarity of Arzew port’s seawater and the other different bioregions. We highlight according to the bioregion, the surfaces that constitute a critical risk of the species introduction and those that constitute a minor risk The study showed that over a period of 1 year, 1313 ships from 28 different bioregions that have made call at Arzew port have accumulated a total wet surface corresponding to about nine million square meters. It is worth to mention that this field of research requires special attention from academics as it may lead to more effective methods to prevent future exotic species introductions.