Effects of probiotic bacteria on the bioaccessibility of aflatoxin B1 and ochratoxin A using an in vitro digestion model under fed conditions

In the present study, we aimed at determining the release of aflatoxin B₁ (AFB₁) and ochratoxin A (OTA) from different food products in the gastro-intestinal tract in the absence and presence of probiotics, a possible adsorbent. The average bioaccessibility of AFB₁ and OTA without probiotics was about 90%, and 30%, respectively, depending on several factors, such as food product, contamination level, compound and type of contamination (spiked versus naturally contaminated). The six probiotic bacteria showed varying binding capacity to AFB₁ and OTA depending on the bacterial strain, toxin studied, type of food and contamination level. A reduction to a maximum of 37% and 73% as observed for the bioaccessibility of AFB₁ and OTA in the presence of probiotic bacteria, respectively. This is the first report on the effect of probiotic bacteria on reducing the fraction of mycotoxins available for absorption in the gastrointestinal tract from different food products.     

Sorption of simazine to corn straw biochars prepared at different pyrolytic temperatures

Simazine sorption to corn straw biochars prepared at various temperatures (100-600 °C) was examined to understand its sorption behavior as influenced by characteristics of biochars. Biochars were characterized via elemental analysis, BET-N₂ surface area (SA), FTIR and ¹³C NMR. Freundlich and dual-mode models described sorption isotherms well. Positive correlation between log K_oc values and aromatic C contents and negative correlation between log K_oc values and (O + N)/C ratios indicate aromatic-rich biochars have high binding affinity to simazine (charge transfer (π-π*) interactions) and hydrophobic binding may overwhelm H-bonding, respectively. Dual-mode model results suggest adsorption contribution to total sorption increases with carbonization degree. Positive correlation between amounts of adsorption (Q_ad) and SA indicates pore-filling mechanism. Comparison between our results and those obtained with other sorbents indicates corn straw biochars produced at higher temperature can effectively retain simazine. These observations will be helpful for designing biochars as engineered sorbents to remove triazine herbicides.     

Pore Structure Effects on Ca-Based Sorbent Sulfation Capacity at Medium Temperatures: Activated Carbon as Sorbent/Catalyst Support

Abstract

The reaction between three different Ca-based sorbents and SO₂ were studied in a medium temperature range (473–773 K). The largest SO₂ capture was found with Ca(OH)₂ at 773 K, 126.31 mg SO₂?g Ca(OH)₂ ^?1, and the influence of SO₂ concentration on the sorbent utilization was observed. Investigations of the internal porous structure of Ca-based sorbents showed that the initial reaction rate was controlled by the surface area, and once the sul-fated products were produced, pore structure dominated. To increase the surface area of Ca-based sorbents available to interact with and retain SO₂, one kind of CaO/activated carbon (AC) sorbent/catalyst was prepared to study the effect of AC on the dispersion of Ca-based materials. The results indicated that the Ca-based material dispersed on high-surface-area AC had more capacities for SO₂ than unsupported Ca-based sorbents. The initial reaction rates of the reaction between SO₂ and Ca-based sorbents and the prepared CaO/AC sorbents/cata-lysts were measured. Results showed that the reaction rate apparently increased with the presence of AC. It was concluded that CaO/AC was the active material in the des-ulfurization reaction. AC acting as the support can play a role to supply O₂ to increase the affinity to SO₂. Moreover, when AC is acting as a support, the surface oxygen functional group formed on the surface of AC can serve as a new site for SO₂ adsorption.     

A fluorometric method to determine rainfastness,volatilization and photostability of glyphosate from glass slides,after application of vision® with two adjuvants

Abstract

A fluorometric method was developed to quantify glyphosate loss from glass surfaces after exposure to the natural forest environment. The method was based on the principle of converting glyphosate into glycine, followed by the fluorogenic labeling with o‐phthalaldehyde. A fluorometer (with λ _Ex = 360 nm / λ_Em =430 nm) was used to quantify the derivatized fluorogenic compound. Response was linear over the concentration range of 143, 286, 572, 858 and 1144 μg of glyphosate (acid equivalent, AE) per mL of the diluted Vision® formulation. Three end‐use mixtures of Vision® were prepared, each at a concentration of 28.6 g AE/L, without and with two adjuvants, Ethomeen® T/25 at 4.5 mL/L and Silwet^® L‐77 at 1.5 mL/L. Several dilutions of the end‐use mixtures were applied on glass slides without and with the coating of cuticular wax extracted from trembling aspen foliage. The slides were left for 5 days in a forest opening to determine rainfastness, volatilization and photostability of glyphosate. The residues were quantified using the method developed. Three calibration curves were required because Silwet decreased the fluorometric response of glyphosate, whereas Ethomeen increased it. The minimum detection limit was 143 μg of glyphosate/mL. Glyphosate was resistant to volatilization and sunlight‐mediated degradation, regardless of the presence of wax coating or the adjuvants. About 64% of the applied glyphosate was washed off after a 9.6 mm rainfall when no adjuvant was present. Both adjuvants provided some amount of rain‐protection to glyphosate, but Silwet reduced the washoff to a greater extent (46%) than Ethomeen (55%).     

Sorption and desorption of glyphosate,MCPA and tetracycline and their mixtures in soil as influenced by phosphate

Phosphate fertilizers and herbicides such as glyphosate and MCPA are commonly applied to agricultural land, and antibiotics such as tetracycline have been detected in soils following the application of livestock manures and biosolids to agricultural land. Utilizing a range of batch equilibrium experiments, this research examined the competitive sorption interactions of these chemicals in soil. Soil samples (0-15 cm) collected from long-term experimental plots contained Olsen P concentrations in the typical (13 to 20 mg kg^?1) and elevated (81 to 99 mg kg^?1) range of build-up phosphate in agricultural soils. The elevated Olsen P concentrations in field soils significantly reduced glyphosate sorption up to 50%, but had no significant impact on MCPA and tetracycline sorption. Fresh phosphate additions in the laboratory, introduced to soil prior to, or at the same time with the other chemical applications, had a greater impact on reducing glyphosate sorption (up to 45%) than on reducing tetracycline (up to 13%) and MCPA (up to 8%) sorption. The impact of fresh phosphate additions on the desorption of these three chemicals was also statistically significant, but numerically very small namely < 1% for glyphosate and tetracycline and 3% for MCPA. The presence of MCPA significantly reduced sorption and increased desorption of glyphosate, but only when MCPA was present at concentrations much greater than environmentally relevant and there was no phosphate added to the MCPA solution. Tetracycline addition had no significant effect on glyphosate sorption and desorption in soil. For the four chemicals studied, we conclude that when mixtures of phosphate, herbicides and antibiotics are present in soil, the greatest influence of their competitive interactions is phosphate decreasing glyphosate sorption and the presence of phosphate in solution lessens the potential impact of MCPA on glyphosate sorption. The presence of chemical mixtures in soil solution has an overall greater impact on the sorption than desorption of individual organic chemicals in soil.     

Distribution of deoxynivalenol in cerebral spinal fluid following administration to swine and sheep 1

Abstract

Deoxynivalenol (DON) is one of the major mycotoxins produced by Fusarium fungi. In evaluating DON as a potent CNS (emetic, anorexic) agent, its cerebral spinal fluid (CSF) and plasma pharmacokinetics were studied in pigs, a species very sensitive to the effects of DON, and sheep, a more tolerant animal. After intravenous administration, DON was detected very rapidly (<2.5 min) in the CSF of both species, but whereas peak levels (t‐max) occurred at 5–10 min in sheep, in swine it was 30–60 min. It would appear that the very rapid and extensive tissue distribution of DON in swine (Vdγ = 1.13 1 kg^‐1) may be slowing the rate of diffusion of the toxin into the CSF compared to sheep (Vd_β = 0.19 1 kg^‐1) where the toxin is confined essentially to the extracellular compartment. Area under curve calculations indicate approximately 2 1/2 times the amount of toxin eventually reaches the pig CSF compared to sheep CSF.

A good relationship between blood‐CSF DON levels was apparent in both species, although limitations in detection methods made it impossible to resolve a slow terminal phase (γ) in swine CSF which was evident in the plasma profile after iv administration.

Following oral administration of DON to pigs, a close correlation between plasma and CSF DON levels was observed. The toxin could be detected in CSF for up to 20 hr post‐dosing.     

Cytotoxicity of gamma irradiated aflatoxin B1 and ochratoxin A

Toxicity of gamma irradiated mycotoxins aflatoxin B₁ (AFB₁) and ochratoxin A (OTA) was investigated in vitro. AFB₁ and OTA stock solutions (50?mM, in methanol) were gamma irradiated (5 and 10 kGy) and non-irradiated and irradiated mycotoxins solutions were tested for cytotoxicity on Pk15, HepG2 and SH-SY5Y cell lines (MTT assay, 1–500?μM concentration range; 24?h exposure). Degradation of mycotoxin molecules was examined by liquid chromatography tandem mass spectrometry (HPLC-MS/MS). AFB₁ and OTA radiolytic products were less toxic than the parent mycotoxins to all of the tested cell lines. Gamma irradiation even at 5 kGy had effect on AFB₁ and OTA molecules however, this effect was dependent on chemical structure of mycotoxin. Since gamma irradiation at low dose reduced initial level of both mycotoxins, and gamma irradiated mycotoxins had lower toxicity in comparison to non-irradiated mycotoxins, it can be concluded that gamma irradiation could be used as decontamination method.     

Glyphosate: environmental contamination,toxicity and potential risks to human health via food contamination

Glyphosate has been the most widely used herbicide during the past three decades. The US Environmental Protection Agency (EPA) classifies glyphosate as ‘practically non-toxic and not an irritant’ under the acute toxicity classification system. This classification is based primarily on toxicity data and due to its unique mode of action via a biochemical pathway that only exists in a small number of organisms that utilise the shikimic acid pathway to produce amino acids, most of which are green plants. This classification is supported by the majority of scientific literature on the toxic effects of glyphosate. However, in 2005, the Food and Agriculture Organisation (FAO) reported that glyphosate and its major metabolite, aminomethylphosphonic acid (AMPA), are of potential toxicological concern, mainly as a result of accumulation of residues in the food chain. The FAO further states that the dietary risk of glyphosate and AMPA is unlikely if the maximum daily intake of 1 mg kg^?1 body weight (bw) is not exceeded. Research has now established that glyphosate can persist in the environment, and therefore, assessments of the health risks associated with glyphosate are more complicated than suggested by acute toxicity data that relate primarily to accidental high-rate exposure. We have used recent literature to assess the possible risks associated with the presence of glyphosate residues in food and the environment.     

Photocatalytic mineralization of glyphosate in a small-scale plug flow simulation reactor by UV/TiO2

The present work involves the photocatalytic mineralization of glyphosate on a plug flow reactor by UV/TiO₂. The effect of catalyst loading shows an optimal value (0.4 g L^?1) which is necessary to mineralize glyphosate. The kinetic rate of glyphosate mineralization decreases with the increasing initial concentration of glyphosate, and the data can be described using the first-order model. An alkaline environment is conducive to glyphosate mineralization. The mineralization efficiency increases with elevated flow rate to 114 mL min^?1, which is followed by a decrease with a further increase in flow rate due to the reduction of the residence time. The presence of external oxidants (K₂S₂O₈, H₂O₂ and KBrO₃) and photosencitizer (humic acid) can significantly enhance glyphosate mineralization. Photocatalysis oxidation ability of the three studied oxidants decrease in the order of: S₂O₈ ^2? > BrO₃ ^? > H₂O₂. Finally, the Langmuir–Hinshelwood (L-H) model was used to rationalize the mechanisms of reactions occurring on TiO₂ surfaces and L-H model constants were also determined.     

Influence of herbicide glyphosate on growth and aflatoxin B1 production by Aspergillus section Flavi strains isolated from soil on in vitro assay

The effect of six glyphosate concentrations on growth rate and aflatoxin B₁ (AFB₁) production by Aspergillus section Flavi strains under different water activity (a_W) on maize-based medium was investigated. In general, the lag phase decreased as glyphosate concentration increased and all the strains showed the same behavior at the different conditions tested. The glyphosate increased significantly the growth of all Aspergillus section Flavi strains in different percentages with respect to control depending on pesticide concentration. At 5.0 and 10 mM this fact was more evident; however significant differences between both concentrations were not observed in most strains. Aflatoxin B₁ production did not show noticeable differences among different pesticide concentrations assayed at all a_W in both strains. This study has shown that these Aspergillus flavus and A. parasiticus strains are able to grow effectively and produce aflatoxins in high nutrient status media over a range of glyphosate concentrations under different water activity conditions.     

The Incidence of Fungi and Mycotoxins in South Africa Wheat and Wheat-Based Products

This investigation was undertaken to survey the fungal and mycotoxin contamination of South African wheat ranging from that growing in the field to processed wheat products. Samples of wheat were taken from various growing areas in South Africa and screened for fungi and mycotoxins, using a range of methodologies, including chromatography, immunoaffinity/fluorimetry, and cytotoxicity testing. Similar samples were taken from supermarkets and retail outlets in South Africa and analyzed in a similar manner. The result showed that a range of fungi and mycotoxins could be detected in wheat in all these sample types. The major fungal contaminants were Fusarium spp. and their attendant mycotoxins, in particular deoxynivalenol, which is in keeping with the observations made in the rest of the world. An interesting observation was that samples of wheat taken from the field with heavy Fusarium contamination were contaminated with fumonisin B₁, which is not normally associated with this crop. Of more concern were the low but persistent levels of mycotoxins and fungi in wheat-based products sold directly to the public.     

Studies on degradation of glyphosate by several oxidative chemical processes: Ozonation,photolysis and heterogeneous photocatalysis

Several different Advanced Oxidation Processes (AOPs) including ozonation at pH 6.5 and 10, photolysis and heterogeneous photocatalysis using TiO₂ as semiconductor and dissolved oxygen as electron acceptor were applied to study the degradation of glyphosate (N-phosphonomethyl glycine) in water. The degree of glyphosate degradation, the reactions kinetic and the formation of the major metabolite, aminomethyl phosphonic acid (AMPA), were evaluated. Ozonation at pH 10 resulted in the maximum mineralization of glyphosate. It was observed that under the experimental conditions used in this study the degradation of glyphosate followed the first-order kinetics. The half-life obtained for glyphosate degradation in the O₃/pH 10 process was 1.8 minutes.     

Sorption behavior of bensulfuron-methyl on andisols and ultisols volcanic ash-derived soils: Contribution of humic fractions and mineral-organic complexes

Bensulfuron-methyl sorption was studied in Andisol and Ultisol soils in view of their characteristic physical and chemical properties, presenting acidic pH and variable charge. Humic and fulvic acids (HA and FA) and humin (HUM) contributions were established. Sorption was studied by using two synthetic sorbents, an aluminum-silicate with iron oxide coverage and the same sorbent coated with humic acid. Freundlich model described Bensulfuron-methyl behavior in all sorbents (R² 0.969-0.998). K_f for soils (8.3-20.7 μg^1−1/n mL^1/n g⁻¹) were higher than those reported in the literature. Organic matter, halloysite or kaolinite, and specific surface area contributed to the global process. The highest K_f for HA, FA and HUM were 539.5, 82.9, and 98.7 μg^1−1/n mL^1/n g⁻¹. Model sorbents described the participation of variable charge materials with high adsorption capacity. The constant capacitance model was used to assess effects of Bensulfuron-methyl adsorption on the distribution of SOH, SOH₂⁺ and SO⁻ sites of sorbents.     

Effect of adjuvants on rainfastness and herbicidal activity of glyphosate deposits on trembling aspen foliage

Abstract

Radiolabelled end‐use mixtures of glyphosate with and without a cationic surfactant (Ethomeen® T/25) and an organosilicone surfactant (Silwet® L‐77) were applied onto trembling aspen (Populus tremuloids Michx.) leaves at the rate of 1.0 kg of AE (acid equivalent) in 35 L/ha area of foliage. A 5‐mm rainfall with an intensity of 10 mm/h was applied at intervals of 0.5, 8, 24, 36, 48, 72, and 96 h after treatment. Glyphosate washoff was determined by liquid scintillation counting of radioactivity in the rain‐washing. At 36 h post‐treatment, both the adjuvants significantly reduced glyphosate washoff (Ethomeen by 69.6% and Silwet by 59.7%) from foliage, compared to the washoff (82.6%) when Vision alone was applied without the adjuvants. Results on the rate of plant growth indicated that with a rain‐free period of 8 h or more, the growth of most seedlings was stunted within 1 or 2 d. Percentage of foliar browning 20 d after treatment with rain‐free period of 8 to 48 h ranged from 8 to 80% for Vision alone, 75 to 100% for Vision with Ethomeen, and 85 to 100% for Vision with Silwet, respectively. Physical properties of the end‐use mixtures were measured with and without the two adjuvants to examine droplet spreading and drying rates in relation glyphosate rainfastness. The Silwet adjuvant lowered the surface tension of the end‐use mixture, but Ethomeen did not. Droplets containing Silwet were spread more than those containing Ethomeen. However, the greater area of contact caused by Silwet did not contribute to a significant increase in the translocation rate of glyphosate into untreated parts of the seedlings, and showed no relationship with rainfastness of glyphosate deposits on trembling aspen.     

Effectiveness evaluation of glyphosate oxidation employing the H2O2/UVC process: Toxicity assays with Vibrio fischeri and Rhinella arenarum tadpoles

The H₂O₂/UVC process was applied to the photodegradation of a commercial formulation of glyphosate in water. Two organisms (Vibrio fischeri bacteria and Rhinella arenarum tadpoles) were used to investigate the toxicity of glyphosate in samples M_1, M₂, and M₃ following different photodegradation reaction times (120, 240 and 360 min, respectively) that had differing amounts of residual H₂O₂. Subsamples of M₁, M₂, and M₃ were then used to create samples M_1,E, M_2,E and M_3,E in which the H₂O₂ had been removed. Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) activities were measured in tadpoles to determine possible sub-lethal effects. In V. fischeri, M_1,E, which was collected early in the photodegradation process, caused 52% inhibition, while M_3,E, which was collected at the end of the photodegradation process, caused only 17% inhibition. Survival of tadpoles was 100% in samples M₂, M₃, and in M_1,E, M_2,E and M_3,E. The lowest percentages of enzymatic inhibition were observed in samples without removal of H₂O₂: 13.96% (AChE) and 16% (BChE) for M₂, and 24.12% (AChE) and 13.83% (BChE) for M₃. These results show the efficiency of the H₂O₂/UVC process in reducing the toxicity of water or wastewater polluted by commercial formulations of glyphosate. According to the ecotoxicity assays, the conditions corresponding to M₂ (11 ± 1 mg a.e. L^?1 glyphosate and 11 ± 1 mg L^?1 H₂O₂) could be used as a final point for glyphosate treatment with the H₂O₂/UV process.     

Bioaccumulation of glyphosate and its formulation Roundup Ultra in Lumbriculus variegatus and its effects on biotransformation and antioxidant enzymes

The bioaccumulation potential of glyphosate and the formulation Roundup Ultra, as well as possible effects on biotransformation and antioxidant enzymes in Lumbriculus variegatus were compared by four days exposure to concentrations between 0.05 and 5 mg L⁻¹ pure glyphosate and its formulation. Bioaccumulation was determined using ¹⁴C labeled glyphosate. The bioaccumulation factor (BCF) varied between 1.4 and 5.9 for the different concentrations, and was higher than estimated from log P_ow. Glyphosate and its surfactant POEA caused elevation of biotransformation enzyme soluble glutathione S-transferase at non-toxic concentrations. Membrane bound glutathione S-transferase activity was significantly elevated in Roundup Ultra exposed worms, compared to treatment with equal glyphosate concentrations, but did not significantly differ from the control. Antioxidant enzyme superoxide dismutase was significantly increased by glyphosate but in particular by Roundup Ultra exposure indicating oxidative stress. The results show that the formulation Roundup Ultra is of more ecotoxicological relevance than the glyphosate itself.     

Effects of sub-lethal glyphosate concentrations on growth and photosynthetic performance of non-target species Bolboschoenus maritimus

Glyphosate use has increased over the last decades for the control of invasive plant species in wetland ecosystems. Although glyphosate has been considered ‘environmentally’ safe, its repeated use could increase the toxicological risk derived from diffuse pollution of surface and groundwater on non-target vegetation. A glasshouse study was designed to determine the effect produced by the addition of different sub-lethal doses of glyphosate herbicides (5–30 mg L⁻¹) to the nutrient solution on the growth and photosynthetic apparatus of Bolboschoenus maritimus. Although B. maritimus plants were able to grow and survive after 20 d of exposure to glyphosate, the presence of this herbicide affected their growth, through a direct interaction with the root system. Particularly, at 30 mg L⁻¹ glyphosate, B. maritimus showed ca. 30% of biomass decrease. The reduction in B. maritimus growth was due to a decrease in net photosynthetic rate (A), which ranged between values ca. 11.5 and 5.5 μmol m⁻² s⁻¹ CO₂ for the control and the highest glyphosate treatment, respectively. The response of A to glyphosate could be largely accounted for by non-stomatal limitations, since stomatal conductance was similar in all glyphosate treatments. Thus, A decrease was prompted by the negative impact of herbicide on photochemical (PSII) apparatus, the reduction in the absorption of essential nutrients, the reduction of photosynthetic pigments and possibly the reduction in Rubisco carboxilation capacity. Moreover, glyphosate excess caused photoinhibitory damage. In conclusion, in this study we have shown that herbicide water pollution could be a source of indirect phytotoxicity for B. maritimus.     

Synthetic SO2 Sorbents for Fluidized-Bed Coal Combustors

The information presented in this paper is directed to engineers who are involved with environmental emissions from coal conversion plants. Synthetic sorbents were investigated as an alternative to natural sorbents (limestone) for the removal of SO₂ from the combustion gas in a fluidized-bed coal combustor. The sulfation rate of a synthetic sorbent, CaO in α-AI₂O₃, was determined as a function of gas composition, temperature, and calcium concentration in the sorbent. The reaction was found to be diffusion-controlled above 850°C and kinetically controlled at lower temperatures. The physical characteristics of the support material have a major effect oh the sulfation kinetics. Porosity measurements indicated that supports containing large pores (>0.2 µm) produced sorbents having high sulfation rates and that pores with diameters less than 0.2 µm did not contribute significantly to the capture of SO₂. The sorbents SrO in α-AI₂O₃ and BaO in α-AI₂O₃ had lower SO₂ capture rates than did CaO in α-AI₂O₃. The alkali metal oxide sorbents K₂O and Na₂O in α-AI₂O₃ captured SO₂ much faster than did the alkaline earth metal oxides.     

Simultaneous Control of Hg0, SO2, and NOx by Novel Oxidized Calcium-Based Sorbents

Abstract

Efforts to develop multipollutant control strategies have demonstrated that adding certain oxidants to different classes of Ca-based sorbents leads to a significant improvement in elemental Hg vapor (Hg⁰), SO₂, and NO_x removal from simulated flue gases. In the study presented here, two classes of Ca-based sorbents (hydrated limes and silicate compounds) were investigated. A number of oxidizing additives at different concentrations were used in the Ca-based sorbent production process. The Hg⁰, SO₂, and NO_x capture capacities of these oxidant-enriched sorbents were evaluated and compared to those of a commercially available activated carbon in bench-scale, fixed-bed, and fluid-bed systems. Calcium-based sorbents prepared with two oxidants, designated C and M, exhibited Hg⁰ sorp-tion capacities (~100 μg/g) comparable to that of the activated carbon; they showed far superior SO₂ and NO_x sorption capacities. Preliminary cost estimates for the process utilizing these novel sorbents indicate potential for substantial lowering of control costs, as compared with other processes currently used or considered for control of Hg⁰, SO₂, and NO_x emissions from coal-fired boilers. The implications of these findings toward development of multipollutant control technologies and planned pilot and field evaluations of more promising multipollutant sorbents are summarily discussed.     

Development and Pilot Plant Evaluation of Silica- Enhanced Lime Sorbents for Dry Flue Gas Desulfurization

EPA’s efforts to develop low cost, retrofitable flue gas cleaning technology include the development of highly reactive sorbents. Recent work addressing lime enhancement and testing at the bench-scale followed by evaluation of the more promising sorbents in a pilot plant are discussed here.

The conversion of Ca(OH)₂ with SO₂ increased several-fold compared with Ca(OH)₂ alone when Ca(OH)₂ was slurrled with fly ash first and later exposed to SO₂ in a laboratory packed bed reactor. Ca(OH)₂ enhancement increased with the increased fly ash amount. Dlatomaceous earths were very effective reactivity promoters of lime-based sorbents. Differential scanning calorimetry of the promoted sorbents revealed the formation of a new phase (calcium silicate hydrates) after hydration, which may be the basis for the observed Improved SO₂ capture.

Fly ash/lime and diatomaceous earth/lime sorbents were tested in a 100 m³/h pilot facility incorporating a gas humidifier, a sorbent duct injection system, and a baghouse. The inlet SO₂ concentration range was 1000-2500 ppm. With once-through dry sorbent injection into the humidified flue gas [approach to saturation 10–20°C (18–36°F) in the baghouse], the total SO₂ removal ranged from 50 to 90 percent for a stoichiometric ratio of 1 to 2. Recycling the collected solids resulted in a total lime utilization exceeding 80–90 percent. Increased lime utilization was also investigated by the use of additives.