Bird use of rice field strips of varying width in the Kanto Plain of central Japan

Bird communities in flooded rice strips of different widths were surveyed in 71 fields around Lake Kasumigaura, on the Kanto Plain (central Japan). Strips categorized into four width classes (<50, 50–100, 100–300 and >300 m) and two locations (core >100 and <100 m from edges) were censused from May to July 1998, and mean species number and density of birds were compared. Both density and mean species differed significantly between classes, strips >300 m wide favoring bird diversity and number of marsh and grassland species. Breeding skylarks and fan-tailed warblers hardly occurred in fields adjacent to edges. Strips <50 m wide were not suitable feeding site of egret species (Ardeidae), but supported diurnal activity of black-crowned night herons and species requiring both rice fields and adjacent environment. As a consequence, bird conservation in rice field strips needs to consider both their width and location within the environment.     

Spider ballooning in soybean and non-crop areas of southeast Queensland

Ballooning is a form of aerial movement practiced by most immature and some adult spiders. Very few studies have investigated the composition and rate of spider ballooning in Australian agroecosystems. Water traps were used to compare ballooning rates in irrigated soybean crops and nearby non-crop areas in southeast Queensland over two summer seasons. The highest ballooning rate (14.8 spiders/m² per day) was recorded in a soybean field, non-crop areas (7.0 spiders/m² per day) and a dry land mungbean field (6.8 spiders/m² per day) having similar rates. Spider ballooning in soybean increased throughout the season and showed three peaks and intervening troughs. A similar pattern in ballooning peaks was observed in non-crop areas however the numbers were lower. Peaks in ballooning activity where synchronised across habitat types and some spider groups. Composition of the ballooning fauna was different from that of the ground-dwelling fauna, some families being present in both. Ballooning is an important behaviour in terms of population dynamics for a number of spider groups in soybean and the implications for pest control are discussed.     

Comparing carbon fluxes between different stages of secondary succession of a karst grassland

Abandonment of marginal agricultural areas with subsequent secondary succession is a widespread type of land use change in Mediterranean and mountain areas of Europe, leading to important environmental consequences such as change in the water balance, carbon cycling, and regional climate. Paired eddy flux measurement design with grassland site and tree/shrub encroached site has been set-up in the Slovenian Karst (submediterranean climate region) to investigate the effects of secondary succession on ecosystem carbon cycling. The invasion of woody plant species was found to significantly change carbon balance shifting annual NEE from source to an evident sink. According to one year of data succession site stored ?126 ± 14 g C m^?2 y^?1 while grassland site emitted 353 ± 72 g C m^?2 y^?1. In addition, the seasonal course of CO₂ exchange differed between both succession stages, which can be related to differences in phenology, i.e. activity of prevailing plant species, and modified environmental conditions within forest fragments of the invaded site. Negligible effect of instrument heating was observed which proves the Burba correction in our ecosystems unnecessary. Unexpectedly high CO₂ emissions and large disagreement with soil respiration especially on the grassland site in late autumn indicate additional sources of carbon which cannot be biologically processes, such as degassing of soil pores and caves after rain events.     

The Satoyama Index: A biodiversity indicator for agricultural landscapes

Agricultural development to meet rapidly growing demands for food and biofuel and the abandonment of traditional land use have had major impacts on biodiversity. Habitat diversity is one of the most important factors influencing biodiversity in agricultural landscapes. In this study we propose an ecological index of ecosystem or habitat diversity in agricultural landscapes – the Satoyama Index (SI) – that is discernible under appropriate spatial units (e.g., 6 km × 6 km) from 1 km × 1 km gridded land-cover data available from an open-access web site. A high SI value is an indicator of high habitat diversity, which is characteristic of traditional agricultural systems, including Japanese satoyama landscapes, while a low value indicates a monotonic habitat condition typical of extensive monoculture landscapes. The index correlated well with the spatial patterns of occurrence of a bird of prey (Butastur indicus) and species richness of amphibians and damselflies in Japan. The values of the SI also corresponded well to the spatial patterns of typical traditional agricultural landscapes with high conservation value in other countries, for example, the dehesas of the Iberian Peninsula and shade coffee landscapes in Central America. Globally, the pattern of East/South-East Asian paddy belts with their high index values contrasts markedly with the low values of the Eurasian, American, and Australian wheat or corn belts. The SI, which correlates landscapes with biodiversity through potential habitat availability, is highly promising for assessing and monitoring the status of biodiversity irrespective of scale.     

Soil-profile organic carbon and total nitrogen during 12 years of pasture management in the Southern Piedmont USA

Soil organic C (SOC) and total soil N (TSN) sequestration estimates are needed to improve our understanding of management influences on soil fertility and terrestrial C cycling related to greenhouse gas emission. We evaluated the factorial combination of nutrient source (inorganic, mixed inorganic and organic, and organic as broiler litter) and forage utilization (unharvested, low and high cattle grazing pressure, and hayed monthly) on soil-profile distribution (0–150 cm) of SOC and TSN during 12 years of pasture management on a Typic Kanhapludult (Acrisol) in Georgia, USA. Nutrient source rarely affected SOC and TSN in the soil profile, despite addition of 73.6 Mg ha^?1 (dry weight) of broiler litter during 12 years of treatment. At the end of 12 years, contents of SOC and TSN at a depth of 0–90 cm under haying were only 82 ± 5% (mean ± S.D. among treatments) of those under grazed management. Within grazed pastures, contents of SOC and TSN at a depth of 0–90 cm were greatest within 5 m of shade and water sources and only 83 ± 7% of maximum at a distance of 30 m and 92 ± 14% of maximum at a distance of 80 m, suggesting a zone of enrichment within pastures due to animal behavior. During 12 years, the annual rate of change in SOC (0–90 cm) followed the order: low grazing pressure (1.17 Mg C ha^?1 year^?1) > unharvested (0.64 Mg C ha^?1 year^?1) = high grazing pressure (0.51 Mg C ha^?1 year^?1) > hayed (?0.22 Mg C ha^?1 year^?1). This study demonstrated that surface accumulation of SOC and TSN occurred, but that increased variability and loss of SOC with depth reduced the significance of surface effects.     

On the relationship between PM2.5 concentrations and regional-scale primary PM emissions for the United Kingdom: an issue of subsidiarity

A site-specific particulate matter PM source apportionment model has been used to estimate the contributions from local primary PM emissions, regional primary PM emissions and the regional background to PM_2.5 concentrations at 102 monitoring site locations and to the centres of 1 km × 1 km grid squares across the United Kingdom. The local primary PM contributions have then been compared with Europe-wide urban PM_2.5 increments estimated at 50 km × 50 km in European-scale integrated assessment models. It is concluded that Europe-wide PM increments used in policy analyses grossly underestimate urban PM concentrations obtained from the site-specific PM source apportionment model for the United Kingdom. Europe-wide urban PM_2.5 increments estimated at 5 km × 5 km scale are significantly improved, particularly for London, but underestimate those for smaller towns and cities by factors of 2–3. These underestimations have important air quality policy ramifications. Although environmental policies may well be best formulated at the European scale, the underpinning air quality modelling may be best carried out at the local scale.     

Aero-lap polishing of poly crystalline diamond inserts using Multicon media

Increasing use of poly crystalline diamond (PCD) inserts as cutting tools and wear parts is vividly seen in automobile, aerospace, marine and precision engineering applications. The PCD inserts undergo series of manufacturing processes such as: grinding that forms the required shape and polishing that gives a fine finish. These operations are not straight forward as PCD is extremely resistant to grinding and polishing. Single crystal diamond can easily be polished by choosing a direction of easy abrasion, but polishing a PCD imposes serious difficulties as the grains are randomly oriented. Prior research on polishing of PCD inserts includes electro discharge grinding (EDG), dynamic friction polishing and grinding by a vitrified bonded diamond wheel. The surface textures of PCD produced using an EDG process often contains: micro cavities, particle pullout, micro-grooves, chipped edges, cracks and gouch marks. While applying the dynamic friction polishing method the PCD material undergoes phase transformation and hence increased polishing rate was apparently seen. However the phase transformation of PCD deteriorates the strength of the insert. Furthermore the inserts produced using the dynamic polishing method often exhibits cracks, chip off and edge damage while using as a cutting tool. Therefore, a new method “aero-lap polishing” was attempted as it applies controlled amount of impinging force by which the surface damage can be significantly reduced. The study did establish an improvement of surface finish of PCD from R_a = 0.55 μm, R_t = 4.5 μm to R_a = 0.29 μm, R_t = 1.6 μm within 15–25 min of polishing time along with significant reduction in surface defects.     

The effect of pitting corrosion on split sleeve cold hole expanded,bare 7075-T651 aluminium alloy

As part of an aircraft fleet fatigue life improvement program, investigation has been carried out into the effect pitting corrosion has on bare 7075-T651 which had undergone split sleeve cold hole expansion. Constant amplitude sinusoidal loading was applied to fatigue test coupons which had pitting corrosion induced upon them by a modified cyclic immersion process using a 3.5% NaCl solution. A pit depth of 39–58 μm was found to significantly reduce the increased fatigue life gains achieved by carrying out cold hole expansion. At 137.9 MPa fatigue life was reduced from achieving run out of ten million cycles to an average 371 × 10³ cycles, while at 165.5 MPa average fatigue life was reduced from 810 × 10³ to 65 × 10³ cycles. The fracture surfaces were analysed under a scanning electron microscope where each displayed an individual crack initiation site located on the material surface within the zone of residual circumferential stress.     

Effects of different diets on utilization of nitrogen from cattle slurry applied to grassland on a sandy soil in The Netherlands

Dietary adjustments have been suggested as a means to reduce N losses from dairy systems. Differences in fertilizing value of dairy slurry as a result of dietary adjustments were evaluated in a 1-year grassland experiment and by long-term modelling. Slurry composition of non-lactating dairy cows was manipulated by feeding diets with extreme high and low levels of dietary protein and energy. C:N_total ratio of the produced slurries ranged from 5.1 to 11.4. To evaluate their short-term fertilizer N value, the experimental slurries (n = 8) and slurries from commercial farms with variable composition (n = 4), were slit-injected in two grassland fields on the same sandy soil series in the north of The Netherlands (53°10′N, 6°04′E), with differences in sward age and ground water level. The recently established grassland field (NEW) was characterized by lower soil OM, N and moisture contents, less herbs and more modern grass varieties compared to the older grassland field (OLD). Slurry was applied in spring (100 kg N ha⁻¹) and after the first cut (80 kg N ha⁻¹) while in total four cuts were harvested. Artificial fertilizer N treatments were included in the experiment to calculate the mineral fertilizer equivalent (MFE) of slurry N. The OLD field showed a higher total N uptake whereas DM yields were similar for the two fields. Average MFE of the slurries on the OLD field (47%) was lower than on the NEW field (56%), probably as a result of denitrification of slurry N during wet conditions in spring. Slurries from high crude protein diets showed a significantly higher MFE (P < 0.05) compared to low crude protein diets. No significant differences in MFE were observed between slurries from high and low energy diets. On both fields, MFE appeared to be positively related to the ammonium content (P < 0.001) and negatively to the C:N_total ratio of the slurry DM (P = 0.001). Simulation of the effect of long-term annual application of 180 kg N ha⁻¹ with highest and lowest C:N_total ratio suggested that both slurries would lead to an increase in annual soil N mineralization. Both soil N mineralization and SOC appeared to be substantially higher in equilibrium state for the slurry with the highest C:N_total ratio. It is concluded that in a situation with slit-injection, the reduced first-year N availability of slurry with a high C:N_total ratio as observed in the grassland experiment will only be compensated for by soil N mineralization on the very long term.     

Modelling greenhouse gas emissions from European conventional and organic dairy farms

Agriculture is an important contributor to global emissions of greenhouse gases (GHG), in particular for methane (CH₄) and nitrous oxide (N₂O). Emissions from farms with a stock of ruminant animals are particularly high due to CH₄ emissions from enteric fermentation and manure handling, and due to the intensive nitrogen (N) cycle on such farms leading to direct and indirect N₂O emissions. The whole-farm model, FarmGHG, was designed to quantify the flows of carbon (C) and nitrogen (N) on dairy farms. The aim of the model was to allow quantification of effects of management practices and mitigation options on GHG emissions. The model provides assessments of emissions from both the production unit and the pre-chains. However, the model does not quantify changes in soil C storage.Model dairy farms were defined within five European agro-ecological zones for both organic and conventional systems. The model farms were all defined to have the same utilised agricultural area (50 ha). Cows on conventional and organic model farms were defined to achieve the same milk yield, so the basic difference between conventional and organic farms was expressed in the livestock density. The organic farms were defined to be 100% self-sufficient with respect to feed. The conventional farms, on the other hand, import concentrates as supplementary feed and their livestock density was defined to be 75% higher than the organic farm density. Regional differences between farms were expressed in the milk yield, the crop rotations, and the cow housing system and manure management method most common to each region.The model results showed that the emissions at farm level could be related to either the farm N surplus or the farm N efficiency. The farm N surplus appeared to be a good proxy for GHG emissions per unit of land area. The GHG emissions increased from 3.0 Mg CO₂-eq ha⁻¹ year⁻¹ at a N surplus of 56 kg N ha⁻¹ year⁻¹ to 15.9 Mg CO₂-eq ha⁻¹ year⁻¹ at a N surplus of 319 kg N ha⁻¹ year⁻¹. The farm N surplus can relatively easily be determined on practical farms from the farm records of imports and exports and the composition of the crop rotation. The GHG emissions per product unit (milk or metabolic energy) were quite closely related to the farm N efficiency, and a doubling of the N efficiency from 12.5 to 25% reduced the emissions per product unit by ca. 50%. The farm N efficiency may therefore be used as a proxy for comparing the efficiencies of farms with respect to supplying products with a low GHG emission.     

Assessing soil chemical and physical property responses to deforestation and subsequent cultivation in smallholders farming system in Ethiopia

In Ethiopia land degradation in the forms of soil erosion and declining soil fertility are serious challenges to agricultural productivity and economic growth. Despite the general recognition of the threat from land degradation on agricultural productivity, few studies have been made to quantify the extent, rate and process of soil fertility depletion under various land use systems and management practices in the country. In this study we assessed soil chemical and physical property responses to deforestation and subsequent cultivation along a chronosequence of closely located farmlands of different ages (7, 10, 26, 34 and 53 years) since conversion from a tropical dry Afromontane natural forest in Ethiopia. These properties were compared with soil properties under an adjacent natural forest. The changes were used as indicators to evaluate the sustainability of the farm management. All the soils in the study were Mollic Andosols/Humic Haplustands. Soil bulk density (g cm⁻³) in the 0–10 and 10–20 cm soil layers increased significantly while percent pore space decreased significantly in a continuum with increasing cultivation period. Soil C and total N contents (g kg⁻¹) in the 0–10 cm soil layer declined significantly and exponentially with increasing years under cultivation. However, in the 10–20 cm soil layer both soil C and total N on the farmlands were significantly higher until after 34 years of continuous cultivation compared to the same soil layer under the natural forest. Consequently, the soil C stock (g m⁻²) of the upper 0.20 m mineral soil was not significantly lower on the farmlands until after 26 years of continuous cultivation compared to the natural forest soil. Available P and K (mg kg⁻¹) in the 0–10 cm layer were higher in the soils of the farmlands throughout the 53 years of continuous cultivation compared to the soil under the natural forest. Exchangeable Ca, CEC and base saturation in the 0–10 cm soil layer declined more or less throughout the cultivation period while in the 10–20 cm soil layer they followed the patterns of soil C of that depth. Generally, the magnitudes and rates of degradation of the soil properties following conversion and subsequent cultivation were lower than expected for a low input tropical farming system as the one investigated. Nevertheless, almost all soil quality attributes showed overall declining trends in the long perspective. This continuous decline, albeit slowly, in soil quality with increasing cultivation period indicated that the present land management is not sustainable. Therefore, improved management is imperative to sustain the soil quality and maintain long-term productivity of the farmlands.     

Water jet guided laser as an alternative to EDM for micro-drilling of fuel injector nozzles: A comparison of machined surfaces

To characterize the inner surface of the fuel injector nozzle holes drilled by EDM and water jet guided laser drilling (Laser Micro-Jet) a specifically conceived scanning probe microscopy technique with true non-contact operating mode was used. A difference in morphology of the drilled surfaces is evident from the acquired surface topography along the hole axis for the two compared drilling techniques. Results showed that the surface texture can be characterized by (i) maximum peak-to-valley distance and (ii) periodicity. Acquired maps confirm that electro-eroded surfaces are an envelope of craters randomly distributed with total excursion up to 1.7 μm with a crater size of 15 μm. While, the efficient melt expulsion and immediate cooling of water jet guided laser generates a peak to valley distance of 800 nm with a periodicity of 18 μm. Average R_q derived from the measured cylindrical surfaces was 450 nm and 150 nm for EDM and Laser Micro-Jet, respectively. Water jet guided laser drilling has proved to be a reliable alternative to EDM from the point of view of repeatability of the results and surface quality to facilitate the atomization of the fuel jet.     

Metal-cored arc welding process for joining of modified 9Cr-1Mo (P91) steel

In the present work, metal-cored arc welding process was used for joining of modified 9Cr-1Mo (P91) steel. Metal-cored arc welding process is characterized by high productivity, slag-free process, defect-free weldments that can be produced with ease, and good weldability. Toughness is essential in welds of P91 steel during hydro-testing of vessels. There is a minimum required toughness of 47 J for welds that has to be met as per the EN1557:1997 specification. In the present study, welds were completed using two kinds of shielding gases, each composition being 80% Argon + 20% CO₂, and pure argon respectively. Microstructural characterization and toughness evaluation of welds were done in the as – weld, PWHT at 760 °C – 2 h and PWHT at 760 °C – 5 h conditions. The pure argon shielded welds (‘A2’ and ‘B2’) have higher toughness than 80% argon + 20% CO₂ shielded welds (‘A1’ and ‘B1’). Pure argon shielded welds show less microinclusion content with low volume fraction of δ-ferrite (<2%) phase. Themo-calc windows (TCW) was used for the prediction of equilibrium critical transformation points for the composition of the welds studied. With increase in post-weld heat treatment (PWHT) duration from 2 h to 5 h, there was increase in toughness of welds above 47 J. Using metal-cored arc welding process, it was possible to achieve the required toughness of more than 47 J after PWHT at 760 °C – 2 h in P91 steel welds.     

Are soils of Iowa USA currently a carbon sink or source? Simulated changes in SOC stock from 1972 to 2007

Upscaling the spatial and temporal changes in carbon (C) stocks and fluxes from sites to regions is a critical and challenging step toward improving our understanding of the dynamics of C sources and sinks over large areas. This study simulated soil organic C (SOC) dynamics within 0–100 cm depth of soils across the state of Iowa in the USA from 1972 to 2007 using the General Ensemble biogeochemical Modeling System (GEMS). The model outputs with variation coefficient were analyzed and assembled from simulation unit to the state scale based upon major land use types at annual step. Results from this study indicate that soils (within a depth of 0–100 cm) in Iowa had been a SOC source at a rate of 190 ± 380 kg C ha^?1 yr^?1. This was likely caused by the installation of a massive drainage system which led to the release of SOC from deep soil layers previously protected under poor drainage conditions. The annual crop rotation was another major force driving SOC variation and resulted in spatial variability of annual budgets in all croplands. Annual rate of change of SOC stocks in all land types depended significantly on the baseline SOC levels; soils with higher SOC levels tended to be C sources, and those with lower levels tended to be C sinks. Management practices (e.g., conservation tillage and residue management practices) slowed down the C emissions from Iowa soils, but could not reverse the general trend of net SOC loss in view of the entire state due mainly to a high level of baseline SOC stocks.     

Dairy farm CH4 and N2O emissions,from one square metre to the full farm scale

The greenhouse gas emissions from agricultural systems contribute significantly to the national budgets for most countries in Europe. Measurement techniques that can identify and quantify emissions are essential in order to improve the selection process of emission reduction options and to enable quantification of the effect of such options. Fast box emission measurements and mobile plume measurements were used to evaluate greenhouse gas emissions from farm sites. The box measurement technique was used to evaluate emissions from farmyard manure and several other potential source areas within the farm. Significant (up to 250 g CH₄ m⁻² day⁻¹and 0.4 g N₂O m⁻² day⁻¹) emissions from ditches close to stables on the farm site were found.Plume emission measurements from individual manure storages were performed at three sites. For a manure storage with 1200 m³ dairy slurry in Wageningen emission factors of 11 ± 5 g CH₄ m⁻³ manure day⁻¹ and 14 ± 8 mg N₂O m⁻³ manure day⁻¹ were obtained in February 2002.Mobile plume measurements were carried out during 4 days at distances between 30 and 300 m downwind of 20 different farms. Total farm emissions levels ranged from 14 to 95 kg CH₄ day⁻¹ for these sites. Expressed as emission per animal the levels were 0.7 ± 0.4 kg CH₄ animal⁻¹ day⁻¹ for conventional farms. For three farms that used straw bedding for the animals1.4 ± 0.2 kg CH₄ animal⁻¹ day⁻¹ was obtained. These factors include both respired methane and emission from manure in the stable and the outside storages.For a subset of these farms the CH₄ emission was compared with monthly averaged model emission calculations using FarmGHG. This model calculates imports, exports and flows of all products through the internal chains on the farm using daily time steps. The fit of modelled versus measured data has a slope of 0.97 but r² = 0.27. Measurements and model emission estimates agree well on average, for large farms within 30%. For small farms the differences can be up to a factor of 3. CH₄ emissions during winter seem to be underestimated.     

Modelling soil phosphorus decline: Expectations of Water Framework Directive policies

Depletion of plant-available soil phosphorus (P) from excessive to agronomically optimum levels is a measure being implemented in Ireland to reduce the risk of diffuse P transfer from land to water. Within the Nitrates and Water Framework Directive regulations the policy tool is designed to help achieve good status by 2015 in water bodies at risk from eutrophication. To guide expectation, this study used soil plot data from eight common soil associations to develop a model of Soil Test P (STP) (Morgan's extract) decline following periods of zero P amendment. This was used to predict the time required to move from excessive (Index 4) to the upper boundary of the optimum (Index 3) soil P concentration range. The relative P balance (P balance : Total soil P) best described an exponential decline (R² = 63%) of STP according to a backwards step-wise regression of a range of soil parameters. Using annual field P balance scenarios (?30 kg P ha^?1, ?15 kg P ha^?1, ?7 kg P ha^?1), average time to the optimum soil P boundary condition was estimated from a range of realistic Total P and STP starting points. For worst case scenarios of high Total P and STP starting points, average time to the boundary was estimated at 7–15 years depending on the field P balance. However, uncertainty analysis of the regression parameter showed that variation can be from 3 to >20 years. Combined with variation in how soil P source changes translate to resulting P delivery to water bodies, water policy regulators are advised to note this inherent uncertainty from P source to receptor with regard to expectations of Water Framework Directive water quality targets and deadlines.     

Process modification in the scouring process of textile industry

The effects of scouring parameters on the scouring efficiency, including the weight ratio of de-sizing agent and fabric (5–80 g/g fabric), temperature of de-sizing agent tank (60–90 °C) and dipping time (2–8 s), were investigated. The results demonstrated that weight loss of sizing agent was significantly observed only in the de-sizing agent tank particularly in the first de-sizing tank and was found to a small extent in water tank. The optimum condition in the scouring machine was found at a de-sizing agent to fabric ratio of 20 g/g fabric, with a temperature of the first de-sizing agent tank of 80 °C, a temperature of the second de-sizing agent tank of 90 °C, and dipping time of fabric of 7 s. According to these conditions, more than 89% of the sizing agent was eliminated and only 3.52 mg/g fabric of sizing agent remained in the scoured fabric which was in an acceptable range for feeding to the down stream process known as dyeing process. Application of our results to actual textile plant has shown that there is a cost reduction due to improved utilization of rinse water, chemicals and energy in the process and consequent decreases in the generation of wastewater. Furthermore, the production capacity was increased from 30 m/min to 34.4 m/min.     

Ammonia and nitrous oxide emissions following land application of high and low nitrogen pig manures to winter wheat at three growth stages

Nitrous oxide (N₂O) and ammonia (NH₃) emissions from surface applied high (HN) and low (LN) nitrogen pig manures were measured under field conditions. Manures were band-spread to a winter wheat crop at three growth stages—mid-tillering, stem elongation and flag leaf emergence. The N₂O flux rates were measured using the static chamber technique while NH₃ volatilisation was assessed using a micrometeorological mass balance technique with passive flux samplers. The N₂O emissions were episodic in nature with flux rates observed ranging from 2.8 to 31.5 g N₂O–N ha^?1 day^?1 (P < 0.001). Higher N₂O emissions generally occurred after rainfall events. Highest N₂O losses were observed from the HN treatment with LN manure use decreasing emissions by 18% (P < 0.03). The NH₃ volatilisation rates were highest within 1 h of manure application with 95% of emissions occurring within 24 h (P < 0.001). Cumulative N loss was highest at mid-tillering as low crop canopy cover and increased wind-speeds enhanced NH₃ loss (P < 0.001). Highest emissions were measured from the HN manure (P < 0.03). Total ammoniacal N loss ranged from 6 to 11%. Crop N uptake and grain yield were unaffected by application timing or manure type. Therefore, the use of LN manures decreased gaseous emissions of N₂O and NH₃ without any adverse effects on crop performance.     

Nitrous oxide emissions from a dung heap measured by chambers and plume methods

Dung heaps provide a large, spatial and temporal variable, source of the greenhouse gas N₂O. In this paper emission rates measured by static and flow through chamber methods, which enclose only a small area of the heap, were compared with Gaussian plume and tracer ratio methods, which measure the emissions from the entire dung heap. The dung heap was a 300 m³ heap, composed of material from nearby cattle sheds. From the flow through and static chambers it was estimated that the dung heap emitted 315 and 51 g N₂ON m⁻³ day⁻¹, respectively. The spatial variability between the chambers and chamber methods was large. Standard deviations of the mean fluxes were >75% of the average flux. The smaller emissions were measured on the slopes of the heap and the larger emissions on the ridge. The plume of N₂O was measured downwind of the dung heap by (1) tunable diode laser spectroscopy and calculation of the N₂O source strength of the heap using Gaussian plume theory and (2) tracer ratio method releasing SF₆ from the heap summit and capture in Tedlar bags downwind with subsequent analysis by gas chromatography. The Gaussian plume theory calculated an average N₂O source strength of 5.3 g N₂ON m⁻³ day⁻¹ (1.4–6.7 g N₂ON m⁻³ day⁻¹). The tracer ratio method calculated a slightly larger average emission rate of 14.4 g N₂ON m⁻³ day⁻¹ (7.4–38.6 g N₂ON m⁻³ day⁻¹). Both methods were successfully validated by point release of SF₆ and N₂O, which suggests that the micrometeorological methods provided a good estimate of the source strength of the heap, whereas the few chamber measurements overestimated its source strength.     

Overstorey tree density and understorey regrowth effects on plant composition,stand structure and floristic richness in grazed temperate woodlands in eastern Australia

As natural woodlands decline in both extent and quality worldwide, there is an increasing recognition of the biodiversity conservation value of production landscapes. In low-input, low-productivity grazing systems in Australia, the modification of natural woodlands through overstorey tree and woody regrowth removal are vegetation management options used by landholders to increase native grass production for livestock grazing; however, there is little empirical evidence to indicate at what tree densities biodiversity attributes are compromised. We examined the effects of overstorey tree density and understorey regowth on the floristic composition, stand structure and species richness of eucalypt woodlands in a grazing landscape in the Traprock region of southern Queensland, Australia. We sampled 47 sites stratified according to vegetation type (Eucalyptus crebra/Eucalyptus dealbata woodland; Eucalyptus melliodora/Eucalyptus microcarpa grassy woodland), density of mature trees (<6 trees/ha; 6–20 trees/ha; >20 trees/ha), and presence/absence of regrowth. Distinct patterns in composition were detected using indicator species analysis and non-metric multidimensional scaling, with low density areas compositionally indistinguishable, although distinct from other land management units. Within vegetation type, medium tree density woodlands were compositionally similar to high density and reference woodlands. Species richness ranged from 18 to 67 species per 500 m² across all sites. No differences in total or native species richness were detected across management units; however, some differences in exotic species richness were detected. Differences in grass cover existed between low and high density management units, yet no difference in grass cover was evident between low and medium density management units. Our results suggest that medium tree densities may provide biodiversity benefits concordant with more natural areas, yet not adversely impact on pasture production. Retaining trees in grazing landscapes provides significant landscape heterogeneity and important refuges for species that may be largely excluded from open grassland habitats. Maintaining a medium density of overstorey trees in grazed paddocks can provide both production and biodiversity benefits.