Reactive transport of uranium(VI) and phosphate in a goethite-coated sand column: an experimental study

The migration of uranium(VI) in subsurface environments is strongly influenced by its adsorption/desorption reactions at the solid/solution interface. Phosphate is often present in subsurface systems and was shown to significantly affect U(VI) adsorption in previous batch experiments. In this study, column experiments were conducted to investigate the effects of phosphate on U(VI) adsorption and transport under flow conditions. The adsorption of U(VI) and phosphate was very low on pure quartz sand with negligible effects on U(VI) and phosphate transport. However, U(VI) and phosphate transport was retarded in a column packed with goethite-coated sand. The presence of phosphate, either as a co-solute with U(VI) or pre-adsorbed, greatly increased U(VI) adsorption and retardation. U(VI) and phosphate adsorption in our column experiments were rate-limited, and the adsorption of U(VI) and phosphate was not reversible, with kinetic limitations more pronounced for desorption than for adsorption. This study demonstrated the importance of phosphate in controlling U(VI) mobility in subsurface environments and helped illustrate some phenomena potentially applicable to U(VI) adsorption and transport in natural systems, especially where U(VI) adsorption is rate-limited.     

Modeling in-situ uranium(VI) bioreduction by sulfate-reducing bacteria

We present a travel-time based reactive transport model to simulate an in-situ bioremediation experiment for demonstrating enhanced bioreduction of uranium(VI). The model considers aquatic equilibrium chemistry of uranium and other groundwater constituents, uranium sorption and precipitation, and the microbial reduction of nitrate, sulfate and U(VI). Kinetic sorption/desorption of U(VI) is characterized by mass transfer between stagnant micro-pores and mobile flow zones. The model describes the succession of terminal electron accepting processes and the growth and decay of sulfate-reducing bacteria, concurrent with the enzymatic reduction of aqueous U(VI) species. The effective U(VI) reduction rate and sorption site distributions are determined by fitting the model simulation to an in-situ experiment at Oak Ridge, TN. Results show that (1) the presence of nitrate inhibits U(VI) reduction at the site; (2) the fitted effective rate of in-situ U(VI) reduction is much smaller than the values reported for laboratory experiments; (3) U(VI) sorption/desorption, which affects U(VI) bioavailability at the site, is strongly controlled by kinetics; (4) both pH and bicarbonate concentration significantly influence the sorption/desorption of U(VI), which therefore cannot be characterized by empirical isotherms; and (5) calcium-uranyl-carbonate complexes significantly influence the model performance of U(VI) reduction.     

Microbial community response to addition of polylactate compounds to stimulate hexavalent chromium reduction in groundwater

To evaluate the efficacy of bioimmobilization of Cr(VI) in groundwater at the Department of Energy Hanford site, we conducted a series of microcosm experiments using a range of commercial electron donors with varying degrees of lactate polymerization (polylactate). These experiments were conducted using Hanford Formation sediments (coarse sand and gravel) immersed in Hanford groundwater, which were amended with Cr(VI) and several types of lactate-based electron donors (Hydrogen Release Compound, HRC; primer-HRC, pHRC; extended release HRC) and the polylactate-cysteine form (Metal Remediation Compound, MRC). The results showed that polylactate compounds stimulated an increase in bacterial biomass and activity to a greater extent than sodium lactate when applied at equivalent carbon concentrations. At the same time, concentrations of headspace hydrogen and methane increased and correlated with changes in the microbial community structure. Enrichment of Pseudomonas spp. occurred with all lactate additions, and enrichment of sulfate-reducing Desulfosporosinus spp. occurred with almost complete sulfate reduction. The results of these experiments demonstrate that amendment with the pHRC and MRC forms result in effective removal of Cr(VI) from solution most likely by both direct (enzymatic) and indirect (microbially generated reductant) mechanisms.     

Conceptual and numerical model of uranium(VI) reductive immobilization in fractured subsurface sediments

A conceptual model and numerical simulations of bacterial U(VI) reduction in fractured subsurface sediments were developed to assess the potential feasibility of biomineralization at the fracture/matrix interface as a mechanism for immobilization of uranium in structured subsurface media. The model envisions flow of anaerobic groundwater, with or without acetate as an electron donor for stimulation of U(VI) reduction by dissimilatory metal-reducing bacteria (DMRB), within mobile macropores along a one-dimensional flow path. As the groundwater moves along the flow path, U(VI) trapped in the immobile mesopore and micropore domains (the sediment matrix) becomes desorbed and transferred to the mobile macropores (fractures) via a first-order exchange mechanism. By allowing bacterial U(VI) reduction to occur in the mesopore domain (assumed to account for 12% of total sediment pore volume) according to experimentally-determined kinetic parameters and an assumed DMRB abundance of 10(7) cells per cm3 bulk sediment (equivalent to 4 mg of cells per dm3 bulk sediment), the concentration of U(VI) in the macropore domain was reduced ca. 10-fold compared to that predicted in the absence of mesopore DMRB activity after a 6-month simulation period. The results suggest that input of soluble electron donors over a period of years could lead to a major redistribution of uranium in fractured subsurface sediments, converting potentially mobile sorbed U(VI) to an insoluble reduced phase (i.e. uraninite) in the mesopore domain that is expected to be permanently immobile under sustained anaerobic conditions.     

Effect of arsenate on adsorption of Cd(II) by two variable charge soils

The effect of arsenate on Cd(II) adsorption in two variable charge soils and the desorption of Cd(II) pre-adsorbed in the presence of arsenate were studied. The batch type experiments showed, the presence of arsenate led to increase in Cd(II) adsorption and the desorption of pre-adsorbed Cd(II). Further it was observed that the extent of adsorption and desorption of Cd(II) was greatly influenced by the initial concentrations of arsenate and Cd(II), the solution pH, and the nature of the soils. In general the increase in arsenate concentration and pH favored the uptake of Cd(II). Moreover, the arsenate concentration influenced more in Hyper-Rhodic Ferralsol than Rhodic Ferralsol at least for the Cd(II) adsorption/desorption. This may be due to the content of Fe/Al oxides in these soils. The larger the content of Fe/Al oxides, the more the adsorption of arsenate by the soil, hence greater the uptake of Cd(II). It can be assumed that the enhanced Cd(II) adsorption was mainly due to the increase in net negative surface charge of the soil induced by the adsorption of arsenate, because the presence of arsenate led to the decrease in zeta potential of these soil suspensions. The increase of electrostatically adsorbed Cd(II) was responsible for the increase in the desorption of Cd(II) pre-adsorbed in the presence of arsenate.     

Plutonium in groundwater at the 100K-Area of the U.S. DOE Hanford Site

We examined the concentration, size distribution, redox state and isotopic composition of plutonium (Pu) in groundwater at the 100K-Area at the U.S. Department of Energy's (DOE) Hanford Site. Total concentrations of Pu isotopes were extremely low (10(-4) to 10(-6) pCi/kg, approximately 10(4) to 10(6) atoms/kg) but measurable for the first time in the 100K-Area wells using mass spectrometric analyses that are much more sensitive than alpha spectroscopy methods used previously. Size fractionation data from two wells suggest that 7-29% of the Pu is associated with colloids, operationally defined here as particles between 1 kDa-0.2 microm in size. These colloids were collected using a 1 kDa cross-flow ultrafiltration (CFF) system developed specifically for groundwater actinide studies to include careful controls both in the field and during processing to ensure in situ geochemical conditions are maintained and size separations can be well characterized. Pu in this colloidal fraction was exclusively in the more reduced Pu(III/IV) form, consistent with the higher affinity of Pu in the lower oxidation states for particle surfaces. While the overall concentrations of Pu were low, the Pu isotopic composition suggests at least two local sources of groundwater Pu, namely, local Hanford reactor operations at the 100K-Area and spent nuclear fuel from the N-reactor, which was stored in concrete pools at this site. Differences between this site and the Savannah River Site (SRS) are noted, since groundwater Pu at the F-Area seepage basin at SRS has been found using these same methods, to be characterized by lower colloidal abundances and higher oxidation states. This difference is not directly attributable to groundwater redox potential or geochemical conditions, but rather the physical-chemical difference in Pu sources, which at SRS appear to be dominated downstream from the seepage basins by decay of 244Cm, resulting in more oxidized forms of 240Pu. There is no clear evidence for colloid facilitated transport of Pu in groundwater at the Hanford Site, since downstream wells have both an order of magnitude lower concentrations of Pu and a lower fractional colloidal distribution.     

Distribution coefficients (Kd) and desorption rates of Cs and Am in Black Sea sediments

The distribution coefficients (K_d) and desorption rates of ¹³⁷Cs and ²⁴¹Am radionuclides in bottom sediments at different locations in the Black Sea were studied under laboratory conditions. The K_d values were found to be 500 for ¹³⁷Cs and 3800 for ²⁴¹Am at the steady state and described exponential curves. Rapid uptake of the radionuclides occurred during the initial period and little accumulation happened after four days. The desorption rates for ¹³⁷Cs in different bottom sediments were best described by a three-component exponential model. The desorption half-times of ¹³⁷Cs ranged from 26 to 50 d at the slow components. However, the desorption rate of ²⁴¹Am described one component for all sediment samples and desorption half-time was found to be 75 d. In general, the results showed that the ²⁴¹Am radionuclide is more effectively transferred to bottom sediment and has longer turnover time than ¹³⁷Cs under Black Sea conditions.     

Oxidative dissolution of uraninite precipitated on Navajo sandstone

Column and batch experiments were conducted with sandstone and ground water samples to investigate oxidation of uraninite precipitated by microbially mediated reduction of U(VI), a contaminant in ground water beneath a uranium mill tailings site near Tuba City, AZ, USA. Uraninite precipitated together with mackinawite (FeS_0.9) because Fe(III) from the sandstone and sulfate, another contaminant in the water were reduced together with U(VI). After completion of U(VI) reduction, experiments were conducted to find out whether uraninite is protected by mackinawite against reoxidation. Uncontaminated ground water from the same site, containing 7 mg/l of dissolved oxygen, was passed through the columns or mixed with sandstone in batch experiments. The results showed that small masses of uraninite, 0.1 μg/g of sandstone, are protected by mackinawite from reoxidation. Uraninite masses on the order of 0.1 μg/g correspond to U(VI) concentrations of 0.5 mg/l, typically encountered in uranium contaminated ground waters. Mackinawite is an effective buffer and is formed in sufficient quantity to provide long-term protection of uraninite. Uranium concentrations in ground water passed through the columns are too low (4 μg/l) to distinguish between dissolution and oxidative dissolution of uraninite. However, batch experiments showed that uraninite oxidation takes place.     

Distribution and variability of redox zones controlling spatial variability of arsenic in the Mississippi River Valley alluvial aquifer, southeastern Arkansas

Twenty one of 118 irrigation water wells in the shallow (25-30 m thick) Mississippi River Valley alluvial aquifer in the Bayou Bartholomew watershed, southeastern Arkansas had arsenic (As) concentrations (<0.5 to 77 microg/L) exceeding 10 microg/L. Sediment and groundwater samples were collected and analyzed from the sites of the highest, median, and lowest concentrations of As in groundwater in the alluvial aquifers located at Jefferson County, Arkansas. A traditional five-step sequential extraction was performed to differentiate the exchangeable, carbonate, amorphous Fe and Mn oxide, organic, and hot HNO(3)-leachable fraction of As and other compounds in sediments. The Chao reagent (0.25 M hydroxylamine hydrochloride in 0.25 M HCl) removes amorphous Fe and Mn oxides and oxyhydroxides (present as coatings on grains and amorphous minerals) by reductive dissolution and is a measure of reducible Fe and Mn in sediments. The hot HNO(3) extraction removes mostly crystalline metal oxides and all other labile forms of As. Significant total As (20%) is complexed with amorphous Fe and Mn oxides in sediments. Arsenic abundance is not significant in carbonates or organic matter. Significant (40-70 microg/kg) exchangeable As is only present at shallow depth (0-1 m below ground surface). Arsenic is positively correlated to Fe extracted by Chao reagent (r=0.83) and hot HNO(3) (r=0.85). Arsenic extracted by Chao reagent decreases significantly with depth as compared to As extracted by hot HNO(3). Fe (II)/Fe (the ratio of Fe concentration in the extracts of Chao reagent and hot HNO(3)) is positively correlated (r=0.76) to As extracted from Chao reagent. Although Fe (II)/Fe increases with depth, the relative abundance of reducible Fe decreases noticeably with depth. The amount of reducible Fe, as well as As complexed to amorphous Fe and Mn oxides and oxyhydroxides decreases with depth. Possible explanations for the decrease in reducible Fe and its complexed As with depth include historic flushing of As and Fe from hydrous ferric oxides (HFO) by microbially-mediated reductive dissolution and aging of HFO to crystalline phases. Hydrogeochemical data suggests that the groundwater in the area falls in the mildly reducing (suboxic) to relatively highly reducing (anoxic) zone, and points to reductive dissolution of HFO as the dominant As release mechanism. Spatial variability of gypsum solubility and simultaneous SO(4)(2-) reduction with co-precipitation of As and sulfide is an important limiting process controlling the concentration of As in groundwater in the area.     

Uranium removal from groundwater via in situ biostimulation: Field-scale modeling of transport and biological processes

During 2002 and 2003, bioremediation experiments in the unconfined aquifer of the Old Rifle UMTRA field site in western Colorado provided evidence for the immobilization of hexavalent uranium in groundwater by iron-reducing Geobacter sp. stimulated by acetate amendment. As the bioavailable Fe(III) terminal electron acceptor was depleted in the zone just downgradient of the acetate injection gallery, sulfate-reducing organisms came to dominate the microbial community. In the present study, we use multicomponent reactive transport modeling to analyze data from the 2002 field experiment to identify the dominant transport and biological processes controlling uranium mobility during biostimulation, and determine field-scale parameters for these modeled processes. The coupled process simulation approach was able to establish a quantitative characterization of the principal flow, transport, and reaction processes based on the 2002 field experiment, that could be applied without modification to describe the 2003 field experiment. Insights gained from this analysis include field-scale estimates of the bioavailable Fe(III) mineral threshold for the onset of sulfate reduction, and rates for the Fe(III), U(VI), and sulfate terminal electron accepting processes.     

Sorption behavior of U(VI) on phyllite: experiments and modeling

The sorption of U(VI) onto low-grade metamorphic rock phyllite was modeled with the diffuse double layer model (DDLM) using the primary mineralogical constituents of phyllite, i.e. quartz, chlorite, muscovite, and albite, as input components, and as additional component, the poorly ordered Fe oxide hydroxide mineral, ferrihydrite. Ferrihydrite forms during the batch sorption experiment as a weathering product of chlorite. In this process, Fe(II), leached from the chlorite, oxidizes to Fe(III), hydrolyses and precipitates as ferrihydrite. The formation of ferrihydrite during the batch sorption experiment was identified by M?ssbauer spectroscopy, showing a 2.8% increase of Fe(III) in the phyllite powder. The ferrihydrite was present as Fe nanoparticles or agglomerates with diameters ranging from 6 to 25 nm, with indications for even smaller particles. These Fe colloids were detected in centrifugation experiments of a ground phyllite suspension using various centrifugal forces. The basis for the successful interpretation of the experimental sorption data of uranyl(VI) on phyllite were: (1) the determination of surface complex formation constants of uranyl with quartz, chlorite, muscovite, albite, and ferrihydrite in individual batch sorption experiments, (2) the determination of surface acidity constants of quartz, chlorite, muscovite, and albite obtained from separate acid-base titration, (3) the determination of surface site densities of quartz, chlorite, muscovite, and albite evaluated independently of each other with adsorption isotherms, and (4) the quantification of the secondary phase ferrihydrite, which formed during the batch sorption experiments with phyllite. The surface complex formation constants and the protolysis constants were optimized by using the experimentally obtained data sets and the computer code FITEQL. Surface site densities were evaluated from adsorption isotherms at pH 6.5. The uranyl(VI) sorption onto phyllite was accurately modeled with these newly determined constants and parameters of the main mineralogical constituents of phyllite and the secondary mineralization phase ferrihydrite. The modeling indicated that uranyl sorption to ferrihydrite clearly dominates uranyl sorption, showing the great importance of secondary iron phases for sorption studies.     

Efficient removal of uranium(VI) from aqueous systems by heat-treated carbon microspheres

In this study, uranium(VI) was successfully removed from aqueous solutions using heat-treated carbon microspheres based on a batch adsorption technique. Influence of the parameters, such as solution pH, contact time, initial uranium(VI) concentration, and temperature on the removal efficiency have been investigated in detail. The results reveal that the maximum adsorption capacity of the heat-treated carbon microspheres toward uranium(VI) is 92.08 mg g^?1, displaying a high efficiency for the removal of uranium(VI) from aqueous solution. The experimental data are analyzed using sorption kinetic models. It is revealed that the process obey the pseudo-second-order kinetic model, the determining step might be chemical sorption. The thermodynamic parameters, such as ΔH°, ΔS°, and ΔG° show that the process is endothermic and spontaneous. This work provides an efficient, fast, and convenient approach for the removal of uranium(VI) from aqueous solutions.     

Removal of As,Mn, Mo,Se, U,V and Zn from groundwater by zero-valent iron in a passive treatment cell: reaction progress modeling

Three treatment cells were operated at a site near Durango, CO. One treatment cell operated for more than 3 years. The treatment cells were used for passive removal of contamination from groundwater at a uranium mill tailings repository site. Zero-valent iron [Fe(0)] that had been powdered, bound with aluminosilicate and molded into plates was used as a reactive material in one treatment cell. The others used granular Fe(0) and steel wool. The treatment cells significantly reduced concentrations of As, Mn, Mo, Se, U, V and Zn in groundwater that flowed through it. Zero-valent iron [Fe(0)], magnetite (Fe3O4), calcite (CaCO3), goethite (FeOOH) and mixtures of contaminant-bearing phases were identified in the solid fraction of one treatment cell. A reaction progress approach was used to model chemical evolution of water chemistry as it reacted with the Fe(0). Precipitation of calcite, ferrous hydroxide [Fe(OH)2] and ferrous sulfide (FeS) were used to simulate observed changes in major-ion aqueous chemistry. The amount of reaction progress differed for each treatment cell. Changes in contaminant concentrations were consistent with precipitation of reduced oxides (UO2, V2O3), sulfides (As2S3, ZnS), iron minerals (FeSe2, FeMoO4) and carbonate (MnCO3). Formation of a free gas phase and precipitation of minerals contributed to loss of hydraulic conductivity in one treatment cell.     

Reduction of U(VI) by the deep subsurface bacterium, Thermus scotoductus SA-01, and the involvement of the ABC transporter protein

In this study we investigated the effect of uranium on the growth of the bacterium Thermus scotoductus strain SA-01 as well as the whole cell U(VI) reduction capabilities of the organism. Also, site-directed mutagenesis confirmed the identity of a protein capable of a possible alternative mechanism of U(VI) reduction. SA-01 can grow aerobically in up to 1.25 mM uranium and has the capability to reduce low levels of U(VI) in under 20 h. TEM analysis performed on cells exposed to uranium showed extracellular and membrane-bound accumulation of uranium. The reductase-like protein was surprisingly identified as a peptide ABC transporter, peptide-binding protein. This study showcases the concept of protein promiscuity, where this protein with a distinct function in situ can also have the unintended function of a reactant for the reduction of U(VI).     

Adsorption of uranium(VI) on amorphous ferric oxyhydroxide at high concentrations of dissolved carbon(IV) and sulfur(VI)

Amorphous ferric oxyhydroxide is being used to treat groundwater contaminated with uranium(VI); the compound also has potential for use as a component in in situ chemical barriers. To quantitatively evaluate its effectiveness in such applications, adsorption of uranium(VI) onto amorphous ferric oxyhydroxide was experimentally investigated under a wide range of uranium(VI) (8.40·10⁻⁷−2.10·10⁻³ mol L⁻¹; 0.2–500 mg L⁻¹), sulfur(VI) (0–0.07 mol L⁻¹; 0–2240 mg L⁻¹) and carbon(IV) (0–0.0195 mol L⁻¹; 0–234 mg L⁻¹) concentrations, and pH-values (4–9.6). The adsorption behavior of uranium(VI) (uranyl ion and its complexes) is similar to that of other cations; it exhibits a sharp rise in the extent of adsorption with increasing pH. Interactions among uranyl complexes and surface sites are interpreted using a site complexation model. Although the model does not incorporate electrostatics and includes only a single type of adsorption site, it provides a reasonable match to measured adsorption and proton exchange data. The simplicity of the model and the resulting reduction in computational demand allow its efficient incorporation into coupled reaction-transport models.     

Cesium migration in saturated silica sand and Hanford sediments as impacted by ionic strength

Large amounts of 137Cs have been accidentally released to the subsurface from the Hanford nuclear site in the state of Washington, USA. The cesium-containing liquids varied in ionic strengths, and often had high electrolyte contents, mainly in the form of NaNO3 and NaOH, reaching concentrations up to several moles per liter. In this study, we investigated the effect of ionic strengths on Cs migration through two types of porous media: silica sand and Hanford sediments. Cesium sorption and transport was studied in 1, 10, 100, and 1000 mM NaCl electrolyte solutions at pH 10. Sorption isotherms were constructed from batch equilibrium experiments and the batch-derived sorption parameters were compared with column breakthrough curves. Column transport experiments were analyzed with a two-site equilibrium-nonequilibrium model. Cesium sorption to the silica sand in batch experiments showed a linear sorption isotherm for all ionic strengths, which matched well with the results from the column experiments at 100 and 1000 mM ionic strength; however, the column experiments at 1 and 10 mM ionic strength indicated a nonlinear sorption behavior of Cs to the silica sand. Transport through silica sand occurred under one-site sorption and equilibrium conditions. Cesium sorption to Hanford sediments in both batch and column experiments was best described with a nonlinear Freundlich isotherm. The column experiments indicated that Cs transport in Hanford sediments occurred under two-site equilibrium and nonequilibrium sorption. The effect of ionic strength on Cs transport was much more pronounced in Hanford sediments than in silica sands. Effective retardation factors of Cs during transport through Hanford sediments were reduced by a factor of 10 when the ionic strength increased from 100 to 1000 mM; for silica sand, the effective retardation was reduced by a factor of 10 when ionic strength increased from 1 to 1000 mM. A two order of magnitude change in ionic strength was needed in the silica sand to observe the same change in Cs retardation as in Hanford sediments.     

Can we predict uranium bioavailability based on soil parameters? Part 1: effect of soil parameters on soil solution uranium concentration

Present study aims to quantify the influence of soil parameters on soil solution uranium concentration for (238)U spiked soils. Eighteen soils collected under pasture were selected such that they covered a wide range for those parameters hypothesised as being potentially important in determining U sorption. Maximum soil solution uranium concentrations were observed at alkaline pH, high inorganic carbon content and low cation exchange capacity, organic matter content, clay content, amorphous Fe and phosphate levels. Except for the significant correlation between the solid-liquid distribution coefficients (K(d), L kg(-1)) and the organic matter content (R(2)=0.70) and amorphous Fe content (R(2)=0.63), there was no single soil parameter significantly explaining the soil solution uranium concentration (which varied 100-fold). Above pH=6, log(K(d)) was linearly related with pH [log(K(d))=-1.18 pH+10.8, R(2)=0.65]. Multiple linear regression analysis did result in improved predictions of the soil solution uranium concentration but the model was complex.     

Sorption and bioreduction of hexavalent uranium at a military facility by the Chesapeake Bay

Directly adjacent to the Chesapeake Bay lies the Aberdeen Proving Ground, a U.S. Army facility where testing of armor-piercing ammunitions has resulted in the deposition of >70,000 kg of depleted uranium (DU) to local soils and sediments. Results of previous environmental monitoring suggested limited mobilization in the impact area and no transport of DU into the nation's largest estuary. To determine if physical and biological reactions constitute mechanisms involved in limiting contaminant transport, the sorption and biotransformation behavior of the radionuclide was studied using geochemical modeling and laboratory microcosms (500 ppb U(VI) initially). An immediate decline in dissolved U(VI) concentrations was observed under both sterile and non-sterile conditions due to rapid association of U(VI) with natural organic matter in the sediment. Reduction of U(VI) to U(IV) occurred only in non-sterile microcosms. In the non-sterile samples, intrinsic bioreduction of uranium involved bacteria of the order Clostridiales and was only moderately enhanced by the addition of acetate (41% vs. 56% in 121 days). Overall, this study demonstrates that the migration of depleted uranium from the APG site into the Chesapeake Bay may be limited by a combination of processes that include rapid sorption of U(VI) species to natural organic matter, followed by slow, intrinsic bioreduction to U(IV).     

Adsorption and desorption processes of MCPA in Polish mineral soils

Studies on the adsorption and desorption of MCPA (4-chloro-2-methylophenoxyacetic acid) were performed in soil horizons of three representative Polish agricultural soils. The Hyperdystric Arenosol, the Haplic Luvisol and the Hypereutric Cambisol were investigated in laboratory batch experiments. Initially, both the adsorption and desorption proceeded rapidly, and either the equilibrium was reached after approximately 30 min or the process slowed down and continued at a slow rate. In the latter case, the equilibrium was reached after 8 hours. Data on the adsorption/desorption kinetics fitted well to the two-site kinetic model. The measured sorption and desorption isotherms were of L-type. The sorption distribution coefficients (K(ads) (d)) were in the range of 0.75--0.97 for Ap soil horizons and significantly lower in deeper soil layers. The corresponding desorption coefficients (K(des) (d)) were higher and ranged from 1.02 to 2.01. Both the adsorption and desorption of MCPA in all soil horizons was strongly and negatively related to soil pH. It appears that hydrophobic sorption plays a dominant role in the MCPA retention in topsoils whereas hydrophilic sorption of MCPA anions is the dominant adsorption mechanism in subsoils.