Photocatalytic degradation of organic dyes by Er<Superscript>3+</Superscript>:YAlO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> composite under solar light

In this work, Er³⁺:YAlO₃/TiO₂ composite was synthesized by a ultrasonic dispersion and liquid boil method. The Er³⁺:YAlO₃/TiO₂ composite and pure TiO₂ powder were characterized by XRD. The degradation of different organic dyes was used to evaluate the photocatalytic activity of the Er³⁺:YAlO₃/TiO₂ composite. It is found that the photocatalytic activity of Er³⁺:YAlO₃/TiO₂ composite is much higher than that for the similar system with only TiO₂. Moreover, this Er³⁺:YAlO₃/TiO₂ composite provides a new way to take advantage of TiO₂ in sewage treatment aspects using solar light.     

Gas-phase degradation of CCl<Subscript>4</Subscript>, CHCl<Subscript>3</Subscript> and CH<Subscript>2</Subscript>Cl<Subscript>2</Subscript> over metallic Fe

We studied the hydrolysis of gas-phase carbon tetrachloride (CCl₄), chloroform (CHCl₃), and dichloromethane (CH₂Cl₂) over a metallic Fe surface for its application in combination with air stripping and soil vapour extraction. The effects of chlorocarbon concentration, type and preparation of the iron-containing material, humidity, and temperature on process performance are reported. The hydrolysis of chlorinated methane derivatives is catalysed by metallic iron resulting in a noticeable decrease of the reaction temperature. The reaction kinetics were found to be consistent with the Langmuir-Hinshelwood model.     

Preparation of effective TiO<Subscript>2</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> photocatalysts for water treatment

Photocatalytic oxidation using semiconductors is one of the advanced oxidation processes for degradation of organic pollutants in water and air. TiO₂ is an excellent photocatalyst that can mineralize a large range of organic pollutants such as pesticides and dyes. The main challenge is to improve the efficiency of the TiO₂ photocatalyst and to extend TiO₂ light absorption spectra to the visible region. A potential solution is to couple TiO₂ with a narrow band gap semiconductor possessing a higher conduction band such as bismuth oxide. Therefore, here we prepared Bi₂O₃/TiO₂ heterojunctions by the impregnation method with different Bi/Ti ratio. The prepared composites have been characterized by UV–Vis diffused reflectance spectra and X-ray diffraction. The photocatalytic activity of the heterojunction has been determined from the degradation of orange II under visible and UV light. Results show that Bi₂O₃/TiO₂ heterojunctions are more effective than pure TiO₂-anatase under UV-A irradiation, with an optimum for the Bi/Ti ratio of 5 %, for the photocatalytic degradation of Orange II. However, the photocatalytic activity under irradiation at λ higher than 420 nm is not much improved. Under UV–visible radiation, the two semiconductors are activated. We propose a mechanism explaining why our products are more effective under UV–visible irradiation. In this case the charge separation is enhanced because a part of photogenerated electrons from the conduction band of TiO₂ will go to the conduction band of bismuth oxide. In this composite, titanium dioxide is the main photocatalyst, while bismuth oxide acts as adsorbent photosensitizer under visible light.     

Effective degradation of tetracycline by mesoporous Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> under visible light irradiation

Bi₂WO₆ was synthesized with a hydrothermal method at different pHs and used for the degradation of tetracycline (TC) in water. The mesoporous Bi₂WO₆ prepared at pH 1 (BWO-1) displayed the highest adsorption and degradation capacity to TC due to its large surface area and more efficient capacity to separate photogenerated electrons and holes. 97% of TC at 20 mg·L^?1 was removed by BWO-1 at 0.5 g·L^?1 after 120 min irradiation under simulated solar light. Only 31% of the total organic carbon (TOC) was removed after 360 min irradiation although the TC removal reached 100%, suggesting that TC was mainly transformed to intermediate products rather than completely mineralized. The intermediates were identified by high-performance liquid chromatography-time of flight-mass spectrometry (HPLC-TOF-MS) and possible photodegradation pathways were proposed.     

Efficient photocatalytic degradation of Rhodamine B dye using ZnO/graphitic C<Subscript>3</Subscript>N<Subscript>4</Subscript> nanocomposites synthesized by microwave

Semiconductor photocatalysis is a solution to issues of environmental pollution and energy shortage because photocatalysis can use solar energy to degrade pollutants. The photocatalytic activity can be improved by using composites of ZnO and other semiconductors. Here, composites of ZnO and polymeric graphite-like C₃N₄ (g-C₃N₄) with high photocatalytic activities were prepared by microwave synthesis. Products were characterized by X-ray diffraction, transmission electron microscopy, ultraviolet–visible and Fourier transform infrared spectroscopy. The photocatalytic degradation of Rhodamine B was tested under irradiation from a Xe lamp. Results show that adding graphite-like C₃N₄ promotes the photocatalytic activity of ZnO. Composites with 1.0 wt% g-C₃N₄ showed the best photodegradation efficiency, and the reaction average energy was approximately 33.71 kJ mol^?1.     

Preparation of CuO/SiO<Subscript>2</Subscript> and photocatalytic activity by degradation of methylene blue

A photocatalyst based on CuO/SiO₂ was prepared, and evaluated for the degradation of methylene blue in aqueous medium. The photocatalyst was obtained by calcination method of copper salt, in the presence of silica. The characterization by XRD, FTIR, and TPR techniques confirmed the formation of CuO as active phase. SEM studies showed CuO deposited on the surface of SiO₂. By ESI-MS, it was demonstrated that the degradation of methylene blue occurs through successive hydroxylations. Photodegradation assays showed that CuO/SiO₂ was efficient for degradation, and that the material worked better in the presence of UV light.     

Rapid photocatalytic degradation of the recalcitrant dye amaranth by highly active N-WO<Subscript>3</Subscript>

Dye wastewater is a major source of toxic aromatic amines released into the environment. Semiconductor photocatalysis is a clean, solar-driven process for the treatment of dye wastewater. To enhance applicability of semiconductor photocatalysis, the catalyst used should be visible light active. Here we report a facile synthesis of a highly visible-light-active nitrogen-doped tungsten oxide, N-WO₃, by thermal decomposition of peroxotungstic acid–urea complex. The structure and properties of N-WO₃ are characterized by X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy. The photodegradation of amaranth catalyzed by N-WO₃ is evaluated in a batch system under visible and ultraviolet A (UVA) light. Our results show successful doping of N in both interstitial and substitutional sites and the presence of N₂-like species. The N doping surprisingly expands the usable portion of the solar spectrum up to the near-infrared region and enhances the photocatalytic activity. At typical experimental conditions such as 25 mg/L of amaranth, 1 g/L of N-WO₃, and pH 7, 100 % degradation of amaranth is achieved within 2 h under both visible and UVA light. The photocatalytic activity of N-WO₃ is maintained in repeated cycles, indicating its exceptional photostability. To the best of our knowledge, this is the first time that a reusable, highly visible-light-active N-WO₃ can be obtained through thermal decomposition of peroxotungstic acid–urea complex.     

Carbon nanotubes-incorporated MIL-88B-Fe as highly efficient Fenton-like catalyst for degradation of organic pollutants

CNTs were incorporated into MIL-88B-Fe to get a new Fenton-like catalyst (C@M). Fe(II) was introduced in C@M to get a fast initiation of Fenton-like reaction. Fe(II) content in C@M was related with oxygen-containing functional groups on CNTs. C@M shows efficient catalytic degradation of pollutants over a wide pH range. Iron-based metal organic frameworks have been verified to be efficient heterogeneous Fenton catalysts due to their open pore channels and highly uniform distribution of metallic centers. In these catalysts, however, the iron element is mainly in the form of Fe(III), which results in a process required to reduce Fe(III) to Fe(II) to initiate Fenton reaction. To address this problem, carbon nanotubes (CNTs) with electron-rich oxygen-functional groups on the surface were incorporated into the metal organic frameworks (MIL-88B-Fe) to improve Fe(II) content for an enhanced Fenton-like performance. The prepared CNT@MIL-88B-Fe (C@M) showed much stronger catalytic ability toward H₂O₂ than MIL-88B-Fe. The pseudo-first-order kinetic constant for phenol degradation by C@M (0.32 min^–1) was about 7 times that of MIL-88B-Fe, and even higher than or comparable to the values of reported heterogeneous Fenton-like catalysts. Moreover, the Fenton-like system could effectively degrade various kinds of refractory organic pollutants and exhibited excellent catalytic activity over a wide pH range (4–9). XPS analysis confirmed that Fe(II) content of the catalyst gradually increased with CNT loadings. Electron spin resonance analysis showed that the signal intensity (•OH) of C@M was much higher than MIL-88B-Fe, which was consistent with the degradation efficiency of pollutants. Furthermore, the Fe(II) content of the catalyst gradually increased along with the oxygen-functional group content of CNTs. The result demonstrated that oxygen-containing functional groups of CNTs have a significant impact on the enhanced catalytic performance of C@M. This study provides a new insight to enhance Fenton reaction by using nanocarbon materials.     

Promotion of transition metal oxides on the NH<Subscript>3</Subscript>-SCR performance of ZrO<Subscript>2</Subscript>-CeO<Subscript>2</Subscript> catalyst

Chromium oxide and manganese oxide promoted ZrO₂-CeO₂ catalysts were prepared by a homogeneous precipitation method for the selective catalytic reduction of NO _x with NH₃. A series of characterization including X-ray diffraction (XRD), high-resolution transmission electron microscope (HR-TEM), Brunauer–Emmett–Teller (BET) surface area analysis, H₂ temperatureprogrammed reduction (H₂-TPR), and X-ray photoelectron spectroscopy (XPS) were used to evaluate the influence of the physicochemical properties on NH₃-SCR activity. Cr-Zr-Ce and Mn-Zr-Ce catalysts are much more active than ZrO₂-CeO₂ binary oxide for the low temperature NH₃-SCR, mainly because of the high specific surface area, more surface oxygen species, improved reducibility derived from synergistic effect among different elements. Mn-Zr-Ce catalyst exhibited high tolerance to SO₂ and H₂O. Cr-Zr-Ce mixed oxide exhibited>80% NO _x conversion at a wide temperature window of 100°C–300°C. In situ DRIFT studies showed that the addition of Cr is beneficial to the formation of Bronsted acid sites and prevents the formation of stable nitrate species because of the presence of Cr^{6 +}. The present mixed oxide can be a candidate for the low temperature abatement of NO _x .

Open image in new window

     

Investigation of the effects of humic acid and H<Subscript>2</Subscript>O<Subscript>2</Subscript> on the photocatalytic degradation of atrazine assisted by microwave

A solution of atrazine in a TiO₂ suspension, an endocrine disruptor in natural water, was tentatively treated by microwave-assisted photocatalytic technique. The effects of mannitol, oxygen, humic acid, and hydrogen dioxide on the photodegradation rate were explored. The results could be deduced as follows: the photocatalytic degradation of atrazine fits the pseudo-first-order kinetic well with k = 0.0328 s^?1, and ·OH was identified as the dominant reactant. Photodegradation of atrazine was hindered in the presence of humic acid, and the retardation effect increased as the concentration of humic acid increased. H₂O₂ displayed a significant negative influence on atrazine photocatalysis efficiency. Based on intermediates identified with gas chromatography-mass spectrometry (GC-MS) and Liquid chromatography-mass spectrometry (LC-MS/MS) techniques, the main degradation routes of atrazine are proposed.     

Spectroscopic tools for remote sensing of greenhouse gases CH<Subscript>4</Subscript>, CF<Subscript>4</Subscript> and SF<Subscript>6</Subscript>

Highly symmetrical molecules such as CH₄, CF₄ or SF₆ are known to be atmospheric pollutants and greenhouse gases. High-resolution spectroscopy in the infrared is particularly suitable for the monitoring of gas concentration and radiative transfers in the earth's atmosphere. This technique requires extensive theoretical studies for the modeling of the spectra of such molecules (positions, intensities and shapes of absorption lines). Here, we have developed powerful tools for the analysis and the simulation of absorption spectra of highly symmetrical molecules. These tools have been implemented in the spherical top data system (STDS) and highly-spherical top data system (HTDS) software available at http://www.u-bourgogne.fr/LPUB/shTDS.html. They include a compilation of modeled data obtained during the last 20 years. An overview of our latest results in this domain will be presented. Electronic Publication     

Degradation of carbendazim by UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript> investigated by kinetic modelling

The transformation of the fungicide carbendazim (methyl-2 benzimidazole carbamate) induced by hydroxyl radical generated by the UV photolysis of H₂O₂ has been studied in dilute aqueous solution. The efficient reaction of hydroxyl radicals with carbendazim led to the rapid degradation of carbendazim. The study of reaction kinetics yielded a second order rate constant of 2.2±0.3 10⁹ M⁻¹ s⁻¹ for HO^· radicals with carbendazim. This value is in agreement with a high reactivity of HO^· radicals with carbendazim. Most degradation products were identified by high performance liquid chromatography mass spectrometry (HPLC-MS). In the presence of hydrogenocarbonate and carbonate ions, hydroxyl radicals were quenched and in turn carbonate radicals CO₃ ^·− were formed. Carbonate radicals are indeed known to react efficiently with compounds containing electron-rich sites such as nitrogen or sulfur atoms. The use of a kinetic modelling software gave evidence for the occurrence of such reactions with carbendazim. The second order rate constant of carbonate radical with carbendazim was equal to 6±2 10⁶ M⁻¹ s⁻¹. Electronic Publication     

Decolorisation of Acid Blue 74 by ultraviolet/H<Subscript>2</Subscript>O<Subscript>2</Subscript>

The photodegradation of Acid blue 74 in aqueous solution employing a H₂O₂/ultraviolet system in a photochemical reactor was investigated. The kinetics of decolorization were studied by application of a kinetic model. The results show that the reaction of decolorization followed pseudo-first order kinetics. We demonstrate that there is an optimum H₂O₂ concentration, at which the rate of the decolorization reaction is maximum. Irradiation at 253.7 nm of the dye solution in the presence of H₂O₂ results in complete discoloration after ten minutes of treatment.     

Unexpected release of HNO<Subscript>3</Subscript> and related species from UV-illuminated TiO<Subscript>2</Subscript> surface into air in photocatalytic oxidation of NO<Subscript>2</Subscript>

We have discovered that HNO₃ and related species are released from the TiO₂ surface into air in the TiO₂ photocatalytic oxidation of NO₂ (1 ppm) under continuous UV light illumination (1 mW cm⁻²) by dehumidifying the outlet gas of the reaction and analyzing the recovered condensate liquid by ion chromatography. The origin of the HNO₃ recovered in the dehumidifier could not be explained by a simple desorption of HNO₃ overproduced on the TiO₂ surface. The produced HNO₃ must be activated on the TiO₂ surface and causing the unidentified reaction.     

Effects of Pd doping on N<Subscript>2</Subscript>O formation over Pt/BaO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> during NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> storage and reduction process

N₂O is a powerful greenhouse gas and plays an important role in destructing the ozone layer. This present work investigated the effects of Pd doping on N₂O formation over Pt/BaO/Al₂O₃ catalyst. Three types of catalysts, Pt/BaO/Al₂O₃, Pt/Pd mechanical mixing catalyst (Pt/BaO/Al₂O₃ + Pd/Al₂O₃) and Pt-Pd co-impregnation catalyst (Pt-Pd/BaO/Al₂O₃) were prepared by incipient wetness impregnation method. These catalysts were first evaluated in NSR activity tests using H₂/CO as reductants and then carefully characterized by BET, CO chemisorption, CO-DRIFTs and H2-TPR techniques. In addition, temperature programmed reactions of NO with H2/CO were conducted to obtain further information about N₂O formation mechanism. Compared with Pt/BaO/Al₂O₃, (Pt/BaO/ Al₂O₃ + Pd/Al₂O₃) produced less N₂O and more NH3 during NO _x storage and reduction process, while an opposite trend was found over (Pt-Pd/BaO/Al₂O₃ + Al₂O₃). Temperature programmed reactions of NO with H₂/CO results showed that Pd/Al₂O₃ component in (Pt/BaO/Al₂O₃ + Pd/Al₂O₃) played an important role in NO reduction to NH₃, and the formed NH3 could reduce NO _x to N₂ leading to a decrease in N₂O formation. Most of N₂O formed over (Pt-Pd/BaO/Al₂O₃ + Al₂O₃) was originated from Pd/BaO/Al₂O₃ component. H₂-TPR results indicated Pd-Ba interaction resulted in more difficultto- reduce PdOx species over Pd/BaO/Al₂O₃, which inhibits the NO dissociation and thus drives the selectivity to N₂O in NO reduction.

Open image in new window

     

Pt/Mg-Ce-O catalyst for NO/H<Subscript>2</Subscript>/O<Subscript>2</Subscript> lean de-No<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> reaction

The NO/H₂/O₂ reaction was studied under oxidizing conditions in the 100-400 °C range over 0.1 wt% Pt supported on various metal oxides such as MgO, CeO₂, SiO₂, La₂O₃, CaO, Y₂O₃ and TiO₂. The Pt/MgO and Pt/CeO₂ catalysts showed good catalytic behaviours. Here, we find that the Pt/Mg-Ce-O catalyst, prepared from MgO and CeO₂ by the sol-gel method, is a very active and selective catalyst towards N₂ formation in the whole 100–400 °C range. This catalyst appears to be the most active, selective and stable one ever reported in the literature for the NO/H₂/O₂ reaction, even in the presence of 5%v H₂O or 20 ppmv of SO₂ in the feed stream.Selected article from the Regional Symposium on Chemistry and Environment, Krusevac, Serbia, June 2003, organised by Dr. Branimir Jovancicevic.     

Photocatalytic degradation of the herbicide cinosulfuron in aqueous TiO<Subscript>2</Subscript> suspension

The photocatalytic degradation of a sulfonylurea herbicide, cinosulfuron, has been studied in TiO₂ aqueous suspensions. A first order kinetic law was found. The influence of the initial concentration of cinosulfuron and of the initial radiant flux on the kinetics were evaluated. The identification of the intermediate products was based on high performance liquid chromatography coupled with mass spectrometry analyses (HPLC-MS). The mineralization of cinosulfuron was traced using ion chromatography and total organic carbon (TOC) measurements. These results indicate that the photocatalytic degradation of cinosulfuron leads to CO₂, NO₃ ⁻ and SO₄ ²⁻ as final products, and in addition cyanuric acid (C₃H₃O₃N₃), confirming previous results on triazinic ring-containing compounds. Electronic Publication     

Effect of alumina and zirconia as binders on the activity of Fe-BEA for NH<Subscript>3</Subscript>-SCR of NO

Fe-BEA catalysts are active for the NH3-SCR of NO. For industrial application, a binder should be added to the Fe-BEA catalysts to make them tightly adhere to the monoliths. The addition of alumina and zirconia as binders to the Fe-BEA led to a different effect on NO conversion. The catalytic activity of the mixed samples was evaluated by the temperature programmed procedure in a flow-reactor system, and the mechanism was analyzed via SEM, BET, XRD and XPS. It was found that larger iron particles were formed by the migration of parent iron particles in the Fe-BEA catalyst with alumina. This led to the increase of Fe³⁺ magnitude and iron cluster, enhancing the abilities of NO oxidation and storage. Accordingly, the SCR activity increased slightly in low temperature but decreased sharply in high temperature. For the Fe-BEA with zirconia sample, NO oxidation and storage abilities decreased due to the less iron clusters. The increase of Fe³⁺ magnitude resulted in higher catalytic oxidation ability, which gave rise to little change in the SCR activity compared with the Fe-BEA.

Open image in new window

     

Effects of SO<Subscript>2</Subscript> contamination on rising CO<Subscript>2</Subscript> drops under high pressure

Although the flow dynamics of pure liquid drops in other liquids has been well researched, little attention has been paid to the impacts of impurities. Hence, most of research is not directly applicable to the real world. To address this gap, we conducted numerical experiments simulating the rise of pure and contaminated drops. It was selected to study liquid CO₂ drops contaminated with SO₂ under high pressure because such mixtures mimic potential scenarios in which drops may leak from carbon capture and storage (CCS) facilities or pipelines. First, numerical simulation experiments were performed to validate our method by comparing our results with previous research on pure drops. Second, the validated numerical approach was applied to simulations of contaminated drops to investigate how contaminants affect rising drops. The results show that the SO₂ contamination caused changes in deformation, breakup phenomena, rising velocities, surrounding flow fields and drag coefficients. Most importantly, the contamination resulted in the formation of smaller “child drops”; such breakup is not observed in pure CO₂ drops. The formation of child drops in turn affects the streamlines, patterns and areas of wakes behind the contaminated drops. The addition of contaminants also enhances the dissolution rate, which is affected by the contaminant concentration and by the flow dynamics of the rising drop. Our results would improve understanding the rise of impure CO₂ drops, such as drops potentially leaked by future CCS operations.     

Enhanced activation of peroxymonosulfate by CNT-TiO2 under UV-light assistance for efficient degradation of organic pollutants

CNT-TiO₂ composite is used to activate PMS under UV-light assistance. Superior performance is due to the enhanced electron-transfer ability of CNT. SO₄•⁻, •OH and ¹O₂ play key roles in the degradation of organic pollutants. In this work, a UV-light assisted peroxymonosulfate (PMS) activation system was constructed with the composite catalyst of multi-walled carbon nanotubes (CNT) - titanium dioxide (TiO₂). Under the UV light irradiation, the photoinduced electrons generated from TiO₂ could be continuously transferred to CNT for the activation of PMS to improve the catalytic performance of organic pollutant degradation. Meanwhile, the separation of photoinduced electron-hole pairs could enhance the photocatalysis efficiency. The electron spin resonance spectroscopy (EPR) and quenching experiments confirmed the generation of sulfate radical (SO₄•⁻), hydroxyl radical (•OH) and singlet oxygen (¹O₂) in the UV/PMS/20%CNT-TiO₂ system. Almost 100% phenol degradation was observed within 20 min UV-light irradiation. The kinetic reaction rate constant of the UV/PMS/20%CNT-TiO₂ system (0.18 min⁻¹) was 23.7 times higher than that of the PMS/Co₃O₄ system (0.0076 min⁻¹). This higher catalytic performance was ascribed to the introduction of photoinduced electrons, which could enhance the activation of PMS by the transfer of electrons in the UV/PMS/CNT-TiO₂ system.