Reaction pathways of dimethyl phthalate degradation in TiO2-UV-O2 and TiO2-UV-Fe(VI) systems

The photocatalytic degradation of dimethyl phthalate (DMP) in aqueous TiO₂ suspension under UV illumination has been investigated using oxygen (O₂) and ferrate (Fe(VI)) as electron acceptors. The experiments demonstrated that Fe(VI) was a more effective electron acceptor than O₂ for scavenging the conduction band electrons from the surface of the catalyst. Some major intermediate products from DMP degradation were identified by HPLC and GC/MS analyses. The analytical results identified dimethyl 3-hydroxyphthalate and dimethyl 2-hydroxyphthalate as the two main intermediate products from the DMP degradation in the TiO₂–UV–O₂ system, while in contrast phthalic acid was found to be the main intermediate product in the TiO₂–UV–Fe(VI) system. These findings indicate that DMP degradation in the TiO₂–UV–O₂ and TiO₂–UV–Fe(VI) systems followed different reaction pathways. An electron spin resonance analysis confirmed that hydroxyl radicals existed in the TiO₂–UV–O₂ reaction system and an unknown radical species (most likely an iron–oxo species) is suspected to exist in the TiO₂–UV–Fe(VI) reaction system. Two pathway schemes of DMP degradation in the TiO₂–UV–O₂ and TiO₂–UV–Fe(VI) reaction systems are proposed. It is believed that the radicals formed in the TiO₂–UV–O₂ reaction system preferably attack the aromatic ring of the DMP, while in contrast the radicals formed in the TiO₂–UV–Fe(VI) reaction systems attack the alkyl chain of DMP.     

Heterogeneous photocatalytic decomposition of benzene on lanthanum-doped TiO2 film at ambient temperature

Lanthanum-doped anatase TiO₂ thin films on glass prepared via a sol–gel process have been shown to have much higher photocatalytic activity for the degradation of gaseous benzene than pure anatase TiO₂ thin film. The photodecomposition of benzene on both types of TiO₂ films follows the first-order kinetics while the CO₂ and CO formation followed the zero-order kinetics. GC/MS identification of the intermediates produced during the photodegradation of benzene revealed that doping lanthanum into TiO₂ thin film favors a cleavage of benzene ring. An optimal lanthanum amount with respect to photocatalytic activity was about 2.5 wt% (La₂O₃/TiO₂).     

Photocatalytic degradation of phenol by visible light-responsive iron-doped TiO2 and spontaneous sedimentation of the TiO2 particles

Fe-doped TiO₂ was prepared by the calcination of Fe_xTiS₂ (x = 0, 0.002, 0.005, 0.008, 0.01) and characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV–visible diffuse reflectance spectra. All the Fe-doped TiO₂ were composed of an anatase crystal form and showed red shifts to a longer wavelength. The activity of the Fe-doped TiO₂ for the degradation of phenol was investigated by varying the iron content during UV (365 nm) and visible light (405 nm and 436 nm) irradiation. The degradation rate depended on the Fe content and the Fe-doped TiO₂ was responsive to the visible light as well as the elevated activity toward UV light. The molar ratio of 0.005 was the optimum for both the UV and visible light irradiations. The result was discussed on the basis of the balance of the excited electron–hole trap by the doped Fe³⁺ and their charge recombination on the doped Fe³⁺ level. The Fe-doped TiO₂ (x = 0.005) was more active than P25 TiO₂ under solar light irradiation. The suspended Fe-doped TiO₂ spontaneously precipitated once the stirring of the reaction mixture was terminated.     

Photocatalytic activity of the calcined H-titanate nanowires for photocatalytic oxidation of acetone in air

Hydrogen titanate (H-titanate) nanowires were prepared via a hydrothermal reaction of TiO₂ powders (P25) in KOH solutions and then calcined at various temperatures. The phase structure, crystallite size, morphology, specific surface area, and pore structures of the calcined H-titanate nanowires at various temperatures were characterized with field emission scanning electron microscope, X-ray diffraction, transmission electron microscopy and nitrogen adsorption–desorption isotherms, and their photocatalytic activities were evaluated by photocatalytic oxidation of acetone in air. With increasing calcination temperature, the specific surface area and porosity of the calcined samples steadily decreased. At a calcination temperature range of 400–600 °C, the calcined H-titanate nanowires showed higher photocatalytic activity than P25 powders for photocatalytic oxidation of acetone. Especially, at 500 °C, the calcined H-titanate nanowires showed the highest photocatalytic activity, which exceeded that of P25 by a factor of about 1.8 times. This can be attributed to the synergetic effect of larger specific surface area, higher pore volume and the presence of brookite TiO₂. With further increase in the calcination temperature (700–900 °C), the photocatalytic activity of the samples decreased obviously owing to the growth of TiO₂ crystallites.     

Effect of void structure of photocatalyst paper on VOC decomposition

TiO₂ powder-containing paper composites, called TiO₂ paper, were prepared by a papermaking technique, and their photocatalytic efficiency was investigated. The TiO₂ paper has a porous structure originating from the layered pulp fiber network, with TiO₂ powders scattered on the fiber matrix. Under UV irradiation, the TiO₂ paper decomposed gaseous acetaldehyde more effectively than powdery TiO₂ and a pulp/TiO₂ mixture not in paper form. Scanning electron microscopy and mercury intrusion analysis revealed that the TiO₂ paper had characteristic unique voids ca. 10 μm in diameter, which might have contributed to the improved photocatalytic performance. TiO₂ paper composites having different void structures were prepared by using beaten pulp fibers with different degrees of freeness and/or ceramic fibers. The photodecomposition efficiency was affected by the void structure of the photocatalyst paper, and the initial degradation rate of acetaldehyde increased with an increase in the total pore volume of TiO₂ paper. The paper voids presumably provided suitable conditions for TiO₂ catalysis, resulting in higher photocatalytic performance by TiO₂ paper than by TiO₂ powder and a pulp/TiO₂ mixture not in paper form.     

Removal of a cationic dye from aqueous solutions by adsorption onto bentonite clay

The ability of bentonite to remove malachite green from aqueous solutions has been studied for different adsorbate concentrations by varying the amount of adsorbent, temperature, pH and shaking time. Maximum adsorption of the dye, i.e. >90% has been achieved in aqueous solutions using 0.05 g of bentonite at a pH of 9. Thermodynamic parameters such as ΔH°, ΔS° and ΔG° were calculated from the slope and intercept of the linear plots of ln K_D against 1/T. Analysis of adsorption results obtained at 298, 308, 318 and 328 K showed that the adsorption pattern on bentonite seems to follow the Langmuir, Freundlih and D–R isotherms. The temperature increase reduces adsorption capacity by bentonite, due to the enhancement of the desorption step in the mechanism. The numerical values of sorption free energy (E_a) of 1.00–1.12 kJ mol⁻¹ indicated physical adsorption. The kinetic data indicated an intraparticle diffusion process with sorption being first order. The rate constant k was 0.526 min⁻¹. The concentration of malachite green oxalate was measured before and after adsorption by using UV–Vis spectrophotometer.     

Pulsed discharge plasma induced Fenton-like reactions for the enhancement of the degradation of 4-chlorophenol in water

To sufficiently utilize chemically active species and enhance the degradation rate and removal efficiency of toxic and biorefractory organic pollutant para-chlorophenol (para-CP), the introductions of iron metal ions (Fe²⁺/Fe³⁺) into either pulsed discharge plasma (PDP) process or the PDP process with TiO₂ photo-catalyst were tentatively performed. The experimental results showed that under the same experimental condition, the degradation rate and removal efficiency of para-CP were greatly enhanced by the introduction of iron ions (Fe²⁺/Fe³⁺) into the PDP process. Moreover, when iron ions and TiO₂ were added together in the PDP process, the degradation rate and removal energy of para-CP further improved. The possible mechanism was discussed that the obvious promoting effects were attributed to ferrous ions via plasma induced Fenton-like reactions by UV light irradiation excited and hydrogen peroxide formed in pulsed electrical discharge, resulting in a larger amount of hydroxyl radicals produced from the residual hydrogen peroxide. In addition, the regeneration of ferric ions to ferrous ions facilitates the progress of plasma induced Fenton-like reactions by photo-catalytic reduction of UV light, photo-catalytic reduction on TiO₂ surface and electron transfer of quinone intermediates, i.e. 1,4-hydroquinone and 1,4-benzoquinone.     

Preparation and characteristics of high performance paper containing titanium dioxide photocatalyst supported on inorganic fiber matrix

A novel paper-based material containing titanium dioxide (TiO₂) photocatalyst was successfully prepared by a papermaking technique with the internal addition of inorganic fibers on which TiO₂ particles were supported. Photodegradation performance of acetaldehyde gas, an indoor pollutant, and the durability of the TiO₂-containing papers were investigated under UV irradiation. Ceramic fiber suspension and polydiallyldimethylammonium chloride as a cationic flocculant were mixed, followed by the addition of TiO₂ suspension and anionic polyacrylamide. Subsequently, the inorganic mixture was poured into a pulp suspension, and TiO₂ handsheets then prepared by a papermaking method. The tensile strength of TiO₂-containing paper without a ceramic carrier decreased by more than 30% after 240-h UV irradiation (2 mW/cm²), although the strength of the TiO₂ sheet with ceramic fibers remained reasonably stable. The efficiency of acetaldehyde decomposition by the TiO₂ paper containing an inorganic carrier was nearly equal to that of the carrier-free TiO₂ paper. Scanning electron microscopic observation suggested that most TiO₂ particles were predominantly supported on the inorganic fiber matrix, and were mostly out of contact with organic pulp fibers. The TiO₂ paper with an inorganic carrier demonstrated both excellent photocatalytic performance and durability, which before had been mutually incompatible for organic materials containing TiO₂ photocatalyst. The two-stage mixing procedure for TiO₂ sheet-making is promising for the simple manufacture of high performance paper with photocatalytic ability.     

TiO2-assisted degradation of a perfluorinated surfactant in aqueous solutions treated by gliding arc discharge

The plasma–chemical degradation of Forafac 1110, a perfluorinated non-ionic surfactant, in aqueous solutions was investigated using TiO₂ catalysts. The considered plasma was the gliding arc in humid air, which results from an electric discharge at atmospheric pressure and quasi-ambient temperature. Two titanium dioxide powders were used and their synergistic effects on the Forafac degradation were compared. The results were discussed through the evolution of the pH, the conductivity, the fluoride ions concentration released in solutions, the surfactant concentration remaining after treatment and the chemical oxygen demand (COD) measurement.

The combination of the plasma–chemical treatment with heterogeneous catalysis through the use of TiO₂ accelerated the Forafac degradation, since only 60 min was sufficient to remove 96% instead of 360 min needed in the absence of TiO₂. The use of anatase and rutile under the trade-name of Rhodia TiO₂ and Merck TiO₂, respectively, led to different results, because Rhodia TiO₂ has proven to be more efficient. It would seem that the crystalline phase as well as the crystallite size, explain the efficiency of anatase. The advantage of the plasma-catalysis is due to the fact that there is a significant production of the OH^• radicals not only generated by the gliding arc discharge but also by TiO₂.     

Photocatalytic bacterial inactivation by polyoxometalates

The photocatalytic inactivation (PCI) of Escherichia coli (Gram-negative) and Bacillus subtilis (Gram-positive) was performed using polyoxometalate (POM) as a homogeneous photocatalyst and compared with that of heterogeneous TiO₂ photocatalyst. Aqueous suspensions of the microorganisms (10⁷–10⁸ cfu ml⁻¹) and POM (or TiO₂) were irradiated with black light lamps. The POM-PCI was faster than (or comparable to) TiO₂-PCI under the experimental conditions employed in this study. The relative efficiency of POM-PCI was species-dependent. Among three POMs (H₃PW₁₂O₄₀, H₃PMo₁₂O₄₀, and H₄SiW₁₂O₄₀) tested in this study, the inactivation of E. coli was fastest with H₄SiW₁₂O₄₀ while that of B. subtilis was the most efficient with H₃PW₁₂O₄₀. Although the biocidal action of TiO₂ photocatalyst has been commonly ascribed to the role of photogenerated reactive oxygen species such as hydroxyl radicals and superoxides, the cell death mechanism with POM seems to be different from TiO₂-PCI. While TiO₂ caused the cell membrane disruption, POM did not induce the cell lysis. When methanol was added to the POM solution, not only the PCI of E. coli was enhanced (contrary to the case of TiO₂-PCI) but also the dark inactivation was observed. This was ascribed to the in situ production of formaldehyde from the oxidation of methanol. The interesting biocidal property of POM photocatalyst might be utilized as a potential disinfectant technology.     

Radiolysis of aqueous 4-nitrophenol solution with Al2O3 or TiO2 nanoparticles

Aqueous 4-nitrophenol solutions containing TiO₂ or Al₂O₃ nanoparticles were irradiated with electron beam. 4-nitrophenol was decomposed by the ionizing radiation process in the absence of the nanoparticles. The addition of TiO₂ or Al₂O₃ (2 g l⁻¹) before irradiation improved the removal of 4-nitrophenol, total organic carbon (TOC) but also nitrogen (TN). To identify the origin of the loss (catalysis or simply adsorption), TiO₂ or Al₂O₃ nanoparticles were added after irradiation. Experiments show that the effect of the presence of TiO₂ or Al₂O₃ during irradiation is just due to adsorption.     

Photodegradation of surfactants. XV: Formation of SO4 ions in the photooxidation of sulfur-containing surfactants

Three types of surfactants and related reference compounds containing sulfonate (-SO₃Na), sulfate (-OSO₃Na) or thioether carboxylate (-S-Cn-COOK) group were photodecomposed in an aqueous heterogeneous dispersion system. The photomineralization to SO₄²⁻ions was examined for the surfactants with different chemical structures. The photocatalytic activities of TiO₂ and ZnO were compared for the sulfonates of dodecylbenzene sulfonate (DBS) and polystyrene sulfonate (PSS), the sulfates of sodium dodecyl sulfate (SDS), and the potassium salts of S-dodecylthioglycol acid (TGA), S-dodecylthiopropionic acid (TPA) and S-dodecylthiomalic acid (TMA). ZnO catalyst exhibited higher activity in the formation of SO₄²⁻ion than TiO₂ catalyst.     

Comparative studies of the Fe3+/2+-UV, H2O2-UV, TiO2-UV/vis systems for the decolorization of a textile dye X-3B in water

The degradation of a common textile dye, Reactive-brilliant red X-3B, by several advanced oxidation technologies was studied in an air-saturated aqueous solution. The dye was resistant to the UV illumination (wavelength λ  320 nm), but was decolorized when one of Fe³⁺, H₂O₂ and TiO₂ components was present. The decolorization rate was observed to be quite different for each system, and the relative order evaluated under comparable conditions followed the order of Fe²⁺–H₂O₂–UV  Fe²⁺–H₂O₂ > Fe³⁺–H₂O₂–UV > Fe³⁺–H₂O₂ > Fe³⁺–TiO₂–UV > TiO₂–UV > Fe³⁺–UV > TiO₂–visible light (λ  450 nm) > H₂O₂–UV > Fe²⁺–UV. The mechanism for each process is discussed, and linked together for understanding the observed differences in reactivity.     

As(V) adsorption on amorphous iron oxide: Triple layer modelling

The adsorption of As(V) by amorphous iron oxide was investigated at 25°C, 0.01 M NaNO₃ background electrolyte as a function of solution pH(4–10) at three initial As(V) concentrations and two Fe(III) concentrations. As(V) adsorption increased with decreasing pH. A modified Langmuir isotherm has been used for describing an equilibrium partition existing between solid and liquid phases. The triple-layer model was used for simulating As(V) adsorption on iron oxide surface. This model was able to describe As(V) adsorption over the pH range 4–10, all at the concentrations of As(V) and Fe(III) studied. =Fe(H₂AsO₄)⁰, = Fe(HAsO₄)⁻ and = Fe(AsO₄)²⁻ have been shown through simulation with inner-sphere complexation products to be more consistent with experimental adsorption observations than complexation with other surface species.     

Azo-dyes photocatalytic degradation in aqueous suspension of TiO2 under solar irradiation

The photodegradation of two common and very stable azo-dyes, i.e. methyl-orange (C₁₄H₁₄N₃SO₃Na) and orange II (C₁₆H₁₁N₂SO₄Na), is reported. The photocatalytic oxidation was carried out in aqueous suspensions of polycrystalline TiO₂ irradiated by sunlight. Compound parabolic collectors, installed at the “Plataforma Solar de Almería” (PSA, Spain) were used as the photoreactors and two identical reacting systems allowed to perform photoreactivity runs for the two dyes at the same time and under the same irradiation conditions. The disappearance of colour and substrates together with the abatement of total organic carbon content was monitored. The main sulfonate-containing intermediates were found to be in lower number in respect to those obtained under artificial irradiation. In particular there were no more evidence of the presence of hydroxylated transients. The dependence of dye photooxidation rate on: (i) substrate concentration; (ii) catalyst amount; and (iii) initial pH was investigated. The influence of the presence of strong oxidant species (H₂O₂, S₂O₈²⁻) and some ions (Cl⁻, SO₄²⁻) on the process was also studied.     

Removal of humic acid using TiO2 photocatalytic process--fractionation and molecular weight characterisation studies

The photocatalytic removal of humic acid (HA) using TiO₂ under UVA irradiation was examined by monitoring changes in the UV₂₅₄ absorbance, dissolved organic carbon (DOC) concentration, apparent molecular weight distribution, and trihalomethane formation potentials (THMFPs) over treatment time. A resin fractionation technique in which the samples were fractionated into four components: very hydrophobic acids (VHA), slightly hydrophobic acids, hydrophilic charged (CHA) and hydrophilic neutral (NEU) was also employed to elucidate the changes in the chemical nature of the HA components during treatment. The UVA/TiO₂ process was found to be effective in removing more than 80% DOC and 90% UV₂₅₄ absorbance. The THMFPs of samples were decreased to below 20 μg l⁻¹ after treatments, which demonstrate the potential to meet increasingly stringent regulatory level of trihalomethanes in water. Resin fractionation analysis showed that the VHA fraction was decreased considerably as a result of photocatalytic treatments, forming CHA intermediates which were further degraded with increased irradiation time. The NEU fraction, which comprised of non-UV-absorbing low molecular weight compounds, was found to be the most persistent component.     

Arsenic removal from water employing heterogeneous photocatalysis with TiO2 immobilized in PET bottles

Arsenic oxidation (As(III) to As(V)) and As(V) removal from water were assessed by using TiO₂ immobilized in PET (polyethylene terephthalate) bottles in the presence of natural sunlight and iron salts. The effect of many parameters was sequentially studied: TiO₂ concentration of the coating solution, Fe(II) concentration, pH, solar irradiation time; dissolved organic carbon concentration. The final conditions (TiO₂ concentration of the coating solution: 10%; Fe(II): 7.0 mg l⁻¹; solar exposure time: 120 min) were applied to natural water samples spiked with 500 μg l⁻¹ As(III) in order to verify the influence of natural water matrix. After treatment, As(III) and total As concentrations were lower than the limit of quantitation (2 μg l⁻¹) of the voltammetric method used, showing a removal over 99%, and giving evidence that As(III) was effectively oxidized to As(V). The results obtained demonstrated that TiO₂ can be easily immobilized on a PET surface in order to perform As(III) oxidation in water and that this TiO₂ immobilization, combined with coprecipitation of arsenic on Fe(III) hydroxides(oxides) could be an efficient way for inorganic arsenic removal from groundwaters.     

Sequential photochemical-biological degradation of chlorophenols

UV/TiO₂/H₂O₂, UV/TiO₂ and UV/H₂O₂ were compared as pre-treatment processes for the detoxification of mixtures of 4-chlorophenol (4CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP) prior to their biological treatment. When each chlorophenol was initially supplied at 50 mg l⁻¹, UV/TiO₂/H₂O₂ treatment supported the highest pollutant removal, COD removal, and dechlorination efficiencies followed by UV/TiO₂ and UV/H₂O₂. The remaining toxicity to Lipedium sativum was similar after all pre-treatments. Chlorophenol photodegradation was always well described by a first order model kinetic (r² > 0.94) and the shortest 4CP, DCP, TCP and PCP half-lives of 8.7, 7.1, 4.5 and 3.3 h, respectively, were achieved during UV/TiO₂/H₂O₂ treatment. No pollutant removal was observed in the controls conducted with H₂O₂ or TiO₂ only. Inoculation of all the photochemically pre-treated mixtures with activated sludge microflora was followed by complete removal of the remaining pollutants. Combined UV/TiO₂/H₂O₂-biological supported the highest detoxification, dechlorination (99%) and COD removal (88%) efficiencies. Similar results were achieved when each chlorophenol was supplied at 100 mg l⁻¹. COD and Cl mass balances indicated UV, UV/H₂O₂, and UV/TiO₂ treatments lead to the formation of recalcitrant photoproducts, some of which were chlorinated.     

Applicability of micellar electrokinetic chromatography to kinetic studies of photocatalytic oxidation of dibenzo-p-dioxin

Micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate was tested for its ability to analyze mixtures containing three dioxin derivatives. Dioxin-containing samples, subjected to photocatalytic oxidation using TiO₂ and/or SnO₂ as the semiconductor catalyst were analyzed by MEKC to obtain the rate constant for each dioxin when it was degraded individually or in the presence of the other two dioxins. A significant degree of analyze competition was observed and the mixed catalyst offered important synergism.     

Photomineralization of n-alkanoic acids in aqueous solution by photocatalytic membranes. Influence of trialkyl vanadates as catalytic promoters of immobilized titanium dioxide

The Ti0₂-mediated photomineralization of 8–1000 ppm of methanoic acid, of 6–100 ppm of ethanoic acid, of 6–180 ppm of propanoic acid, and of 6–90 ppm of n-decanoic acid in aqueous solutions was studied at 296± 2 K or 308 ± 2 K, with low and high pressure mercury arc lamps (radiant power in the absorption range 8 and 145 W respectively), using PHOTOPERM® CPP/313 membranes containing immobilized 30±3 wt.% Ti0₂, and, in parallel runs, 7 wt.% of a synergic mixture of tri(t-butyl)- and tri-(i-propyl) vanadate(V) as photocatalytic promoter. Stoichiometric H₂0₂ was used or, in some of the runs, 0₃, at saturation, as oxygen suppliers. Disappearance of total organic carbon (TOC) was followed as a function of time. To fit kinetic curves up to complete photomineralization, a kinetic model was employed, already used successfully in previous studies, which considers appearance and disappearance of all intermediates, as if they were represented by a hypothetical single molecule, mediating all of them. The photocatalytic activity of trialkyl vanadates was evaluated from quantum yields at “infinite” concentration, with respect to the maximum allowable efficiencies. When using O₃, a dark catalysis effect clearly appeared towards intermediate species produced during the photocatalysed degradation.