Implications of the ban on organotins for protection of global coastal and marine ecology

Organotin-based antifouling paints are highly effective against most fouling organisms, and their application results in a large amount of savings for the shipping industry. On the other hand, TBT (tributyltin) in antifouling paints is described as the most toxic substance ever introduced into the marine environment. Consequential environmental impacts of TBT led to its regulation in many countries, although concerns were raised regarding the complete prohibition of organotin-based compounds in antifouling paints. Serious concerns were also raised regarding the complete banning of organotins. After long deliberations, the AFS Convention (convention to control the use of harmful antifouling systems on ships) was adopted on 5 October 2001. The Convention, which prohibits the use of harmful organotins in antifouling paints used on ships, will enter into force on 17 September 2008. In view of the concerns raised against the prohibition of organotin-based compounds in antifouling paints, this paper focuses on a review of the AFS Convention, with a gap analysis on the difficulties in implementation of the Convention. It also offers some recommendations for improved policies.     

Antifouling paints: Use on boats in San Diego Bay and a way to minimize adverse impacts

High concentrations of copper and tributyltin, two biocides used in antifouling paints, are found in harbors. Efforts are necessary to reduce the adverse impact of biocides from antifouling paints, but little is known about the actual use of such material. I surveyed the operators of 435 boats berthed in San Diego Bay, to determine what paints and maintenance procedures were being used.More than 90% of the respondents used conventional leaching paints. These paints contain 40% to 65% copper compounds and 3% to 7% tributyltin compounds. Few respondents used copolymer paints. Those who did use copolymer paints seemed to repaint less frequently than those using conventional leaching paints.Professional maintenance companies do not initiate repainting as frequently as individuals doing their own maintenance.It appears that the input of antifouling biocides to harbor waters could be reduced by at least one-third simply by educating boat-owners about the chemical mechanisms involved in antifouling paints, by explaining the environmental and economic advantages of using slow-release paints, and by encouraging them not to repaint until their paint's useful life has expired.     

Different formats of imprinted polymers for determining organotin compounds in environmental samples

Organotin compounds and their degradation products enter the environment mainly as a result of their use as biocides and antifouling paints. Analysis of these compounds in environmental samples has to be very sensitive and selective so that their concentrations corresponding to the low environmental target values can also be detected. Generally, analysis of a complex matrix leads to high interferences during the different process steps; clean-up procedures are recommended to overcome this problem. For the past many years, solid phase extraction by employing imprinted materials has been extensively used for many organic substances that are used for pre-concentration and clean-up purposes with excellent results. Here, we present three different imprinted polymers prepared via bulk, precipitation, and emulsion polymerization methods that use similar compositions. The synthesized polymer particles were characterized morphologically by employing scanning electron microscopy and Brunauer-Emmett-Teller analysis. Binding properties were calculated using the Langmuir-Freundlich isotherm. Depending on the properties of the materials, different analytical applications for complex matrices are proposed. These applications are mainly used on tributyltin and its degradation products for environmental analysis.     

Butyltin occurrence and risk assessment in the sediments of the Iberian Peninsula

The occurrence of butyltin (BT) compounds in more than 50 recent sediment samples of the Iberian Peninsula, collected in the harbours of the western Mediterranean Sea (Spain) and the North Atlantic Ocean (Portugal), including domestic and industrial sewage disposal sites, has been assessed. The highest levels of tributyltin (TBT) (7673 μg kg^?1 dry wt.) were detected in commercial harbours associated with inputs from large vessels. However, relatively high TBT values (about 2150 μg kg^?1 dry wt.) were also detected in fishing and recreational boating areas. Spanish marinas and harbours are more polluted in terms of TBT (5–7673 μg kg^?1 dry wt.) compared to those in Portugal (4–12 μg kg^?1 dry wt.). Generally, the Mediterranean sediments show a BT distribution characterized by the predominance of TBT over the degradation products dibutyl (DBT) and monobutyltin (MBT), indicating the presence of recent inputs, in contrast to the Portuguese coastal distribution. Calculation of butyltin degradation indexes (BDI) confirmed a different trend, depending on the area. Furthermore, a comparative study of the occurrence of BT in different sewage sludge disposal sites shows that domestic primary sewage sludge effluents can contribute to coastal BT pollution, but to a lesser extent when compared with harbours. Historical trends (1995–2003) for Barcelona harbour reveal that BT regulations on the use of TBT-based antifouling paints have not been fully effective. Finally, a comparison against the existing sediment quality guidelines (SQGs) indicated that acute toxic effects could only be expected for TBT in some Mediterranean harbours; conversely, in every North Atlantic Ocean station, a lesser environmental threat for the harbour benthic community is expected.     

EFFECTS OF BEST MANAGEMENT PRACTICES ON FOREST STREAMWATER QUALITY IN EASTERN KENTUCKY1

ABSTRACT: Forest land managers are concerned about the effects of logging on soil erosion, streamflow, and water quality and are promoting the use of Best Management Practices (BMPs) to control impacts. To compare the effects of BMP implementation on streamwater quality, two of three small watersheds in Kentucky were harvested in 1983 and 1984, one with BMPs, the other without BMPs. There was no effect of clearcutting on stream temperatures. Streamflow increased by 17.8 cm (123 percent) on the BMP watershed during the first 17 months after cutting and by 20.6 cm (138 percent) on the Non-BMP watershed. Water yields remained significantly elevated compared to the uncut watershed 8 years after harvesting. Suspended sediment flux was 14 and 30 times higher on the BMP and Non-BMP Watersheds, respectively, than on the uncut watershed during treatment, and 4 and 6.5 times higher in the 17 months after treatment was complete. Clearcutting resulted in increased concentrations of nitrate, and other nutrients compared to the uncut watershed, and concentrations were highest on the non-BMP watershed. Recovery of biotic control over nutrient losses occurred within three years of clearcutting. The streamside buffer strip was effective in reducing the impact of clearcutting on water yield and sediment flux.     

A binational, supply-side evaluation for managing water quality and invasive fouling species on California's coastal boats

Integrated solutions are needed for sustainable management of risks posed by recreational boats to coastal water quality and ecosystems. Fouling organisms roughen vessel hull surfaces, creating friction that slows sailboats and increases fuel consumption by powerboats. Hull fouling control strategies for recreational boats that are stored in the water may include antifouling hull paints, newer alternative hull coatings, periodic in-water hull cleaning, and excluding propagules by surrounding the boat with a slip liner or raising it above water on a lift. Copper discharged to harbor waters from antifouling paints via passive leaching and in-water hull cleaning may elevate dissolved copper levels above government standards. Invasive species carried among boat-hull fouling organisms may be introduced as boats move among coastal areas. Some of these species tolerate copper in antifouling paints and copper-polluted harbor waters. Policy development must consider supply-side capacity, as well as economic and environmental sustainability, in managing these issues. This paper presents a supply-side evaluation useful in developing policies to co-manage water quality and invasive species risks for recreational boats navigating along the coasts of California, the Baja California peninsula and California's Sacramento-San Joaquin Delta. Supply-side perspectives on services, materials, costs, and boat owner behaviors, such as residence and travel patterns, awareness of hull-coating choices and selection of hull coatings, are determined. Analyses include evaluation of risks, risk management capacity and costs, and role of education in risk management. The issues raised are broadly applicable, as they are appearing on research and policy agendas in diverse coastal areas.     

TBT contamination of remote marine environments: ship groundings and ice-breakers as sources of organotins in the Great Barrier Reef and Antarctica

Remote marine environments such as many parts of the Great Barrier Reef (GBR) and the Antarctic are often assumed to be among the most pristine natural habitats. While distance protects them from many sources of pollution, recent studies have revealed extremely high concentrations of organotins in areas associated with shipping activities. Sediments at sites of ship groundings on the GBR have been found to contain up to 340,000 microg Sn kg(-1). Very high concentrations (up to 2290 microg Sn kg(-1)) have been detected in nearshore Antarctic sediments adjacent to channels cut through sea ice by ice-breaking vessels. In both cases, the bulk of the contamination is associated with flakes of antifouling paint abraded from vessel hulls, resulting in patchy but locally intense contamination of sediments. These particulates are likely to continue releasing organotins, rendering grounding sites and ice-breaking routes point-sources of contamination of surrounding environments. While the areas exposed to biologically-harmful concentrations of leached chemicals are likely to be limited in extent (1000-10,000 m(2)), deposition of antifouling paints constitutes a persistent ecological risk in otherwise pristine marine environments of high conservation value. The risk of contamination of GBR and Antarctic sediments by organotins needs to be considered against an important alternative risk: that less effective antifouling of ships hulls may increase the frequency of successful invasions by non-indigenous species. Additional options to minimise ecological risk include accident prevention and reducing organotin contamination from grounding sites through removal or treatment of contaminated sediments, as has been done at some sites in the GBR.     

The legal design of the international and European Union ban on tributyltin antifouling paint: direct and indirect effects

The Convention on the Control of Harmful Anti-fouling Systems on Ships (AFS Convention), which was adopted in 2001 and will come into force in September 2008, bans the use of TBT (tributyltin) antifouling paint on ships. The EU (European Union) effectively implemented the Convention on 1 January 2008 by enforcing a similar ban. Several states have national restrictions and bans in place. The regulation on TBT antifouling paint aims at checking the risk of adverse effects on marine ecosystems. The legal and political situation is, however, characterized by complex relations between different layers of legislation, the use of several different legal techniques, and levels of ambition. The international and EU bans thereby cause some indirect effects, which are only partly included in what is seen as 'the TBT issue' and so only partly assessed in the legal process of the ban. This article discusses the expediency of the existing legislation and legal strategies aimed at reducing the negative environmental effects of TBT-like toxins in marine ecosystems and indirect effects of such actions. It considers the adequacy and limits of current regulatory approaches for handling complex environmental problems, such as TBT in antifouling paint.     

WATER QUALITY MODELING OF ALTERNATIVE AGRICULTURAL SCENARIOS IN THE U.S. CORN BELT1

ABSTRACT: Simulated water quality resulting from three alternative future land‐use scenarios for two agricultural watersheds in central Iowa was compared to water quality under current and historic land use/land cover to explore both the potential water quality impact of perpetuating current trends and potential benefits of major changes in agricultural practices in the U.S. Corn Belt. The Soil Water Assessment Tool (SWAT) was applied to evaluate the effect of management practices on surface water discharge and annual loads of sediment and nitrate in these watersheds. The agricultural practices comprising Scenario 1, which assumes perpetuation of current trends (conversion to conservation tillage, increase in farm size and land in production, use of currently‐employed Best Management Practices (BMPs)) result in simulated increased export of nitrate and decreased export of sediment relative to the present. However, simulations indicate that the substantial changes in agricultural practices envisioned in Scenarios 2 and 3 (conversion to conservation tillage, strip intercropping, rotational grazing, conservation set‐asides and greatly extended use of best management practices (BMPs) such as riparian buffers, engineered wetlands, grassed waterways, filter strips and field borders) could potentially reduce current loadings of sediment by 37 to 67 percent and nutrients by 54 to 75 percent. Results from the study indicate that major improvements in water quality in these agricultural watersheds could be achieved if such environmentally‐targeted agricultural practices were employed. Traditional approaches to water quality improvement through application of traditional BMPs will result in little or no change in nutrient export and minor decreases in sediment export from Corn Belt watersheds.     

Evaluating agricultural best management practices in tile-drained subwatersheds of the Mackinaw River, Illinois

Best management practices (BMPs) are widely promoted in agricultural watersheds as a means of improving water quality and ameliorating altered hydrology. We used a paired watershed approach to evaluate whether focused outreach could increase BMP implementation rates and whether BMPs could induce watershed-scale (4000 ha) changes in nutrients, suspended sediment concentrations, or hydrology in an agricultural watershed in central Illinois. Land use was >90% row crop agriculture with extensive subsurface tile drainage. Outreach successfully increased BMP implementation rates for grassed waterways, stream buffers, and strip-tillage within the treatment watershed, which are designed to reduce surface runoff and soil erosion. No significant changes in nitrate-nitrogen (NO-N), total phosphorus (TP), dissolved reactive phosphorus, total suspended sediment (TSS), or hydrology were observed after implementation of these BMPs over 7 yr of monitoring. Annual NO-N export (39-299 Mg) in the two watersheds was equally exported during baseflow and stormflow. Mean annual TP export was similar between the watersheds (3.8 Mg) and was greater for TSS in the treatment (1626 ± 497 Mg) than in the reference (940 ± 327 Mg) watershed. Export of TP and TSS was primarily due to stormflow (>85%). Results suggest that the BMPs established during this study were not adequate to override nutrient export from subsurface drainage tiles. Conservation planning in tile-drained agricultural watersheds will require a combination of surface-water BMPs and conservation practices that intercept and retain subsurface agricultural runoff. Our study emphasizes the need to measure conservation outcomes and not just implementation rates of conservation practices.     

Predicted concentrations of biocides from antifouling paints in Visakhapatnam Harbour

The concentrations of biocides leached from antifouling coatings are monitored in most of the developed countries. However, in India and many other developing countries, there is very little data available on the concentrations of biocides in ports and harbours. The first step was to obtain the order of magnitude levels of concentrations of biocides in the marine environment of the Visakhapatnam Harbour, and the MAM-PEC (Marine Antifoulant Model to Predict Environmental Concentrations) model was used to predict these values. The Visakhapatnam Port lies on the eastern coast of India, roughly halfway between Chennai and Kolkata, and is the largest port in India. This port is a natural harbour; the long and narrow outlet to the open sea makes it a 'poorly flushed' harbour. Predicted concentrations of tributyltin (TBT), copper, dichlofluanid, seanine, irgarol, diuron, tolylfluanid, and zinc pyrithione were computed. The results of the computations indicate that the levels of these biocides are comparable to those in many western countries. This gives credence to the fact that persistence of TBT and some other biocides is a global problem that cannot be ignored.     

Assessing BMP Effectiveness and Guiding BMP Planning Using Process‐Based Modeling

There is an increasing need for improved process‐based planning tools to assist watershed managers in the selection and placement of effective best management practices (BMPs). In this article, we present an approach, based on the Water Erosion Prediction Project model and a pesticide transport model, to identify dominant hydrologic flow paths and critical source areas for a variety of pollutant types. We use this approach to compare the relative impacts of BMPs on hydrology, erosion, sediment, and pollutant delivery within different landscapes. Specifically, we focus on using this approach to understand what factors promoted and/or hindered BMP effectiveness at three Conservation Effects Assessment Project watersheds: Paradise Creek Watershed in Idaho, Walnut Creek Watershed in Iowa, and Goodwater Creek Experimental Watershed in Missouri. These watersheds were first broken down into unique land types based on soil and topographic characteristics. We used the model to assess BMP effectiveness in each of these land types. This simple process‐based modeling approach provided valuable insights that are not generally available to planners when selecting and locating BMPs and helped explain fundamental reasons why long‐term improvement in water quality of these three watersheds has yet to be completely realized.     

Effectiveness of BMPS in Reducing Sediment From Unpaved Roads in the Stillwater Creek,Oklahoma Watershed1

Turton, Donald J., Michael D. Smolen, and Elaine Stebler, 2009. Effectiveness of BMPs in Reducing Sediment From Unpaved Roads in the Stillwater Creek, Oklahoma Watershed. Journal of the American Water Resources Association (JAWRA) 45(6):1343‐1351. Abstract: Erosion from rural unpaved roads is thought to be an important source of sediment in sediment‐impaired streams in Oklahoma and other locations. However, no direct measurements of sediment yields from rural unpaved roads were previously available for Oklahoma. Four rural unpaved road segments in the Stillwater Creek Watershed were instrumented in a paired watershed design to measure sediment yields to streams before and after the installation of Best Management Practices (BMPs). One segment of each pair remained under current management to serve as a control. The second segment received BMPs after a 1‐year calibration period. One BMP consisted of widening the ditches, re‐shaping ditches and cutslopes, putting a proper crown on the road surface, and vegetating disturbed areas with grass. The other BMP consisted of creating a proper crown on the road bed, applying a geo‐synthetic fabric to the road bed and surfacing with 127 mm of crusher run gravel containing 12‐15% fines to serve as a binder. Road segment sediment yields for individual storms varied, depending on factors such as rainfall amount and intensity. During the pre‐BMP year, storm sediment yields ranged from 0 to 4.3 Mg on one pair of segments and from 0 to 2.8 Mg on the other. The storm sediment yields and annual yields were in the same order of magnitude as sediment yields from unpaved rural or forest roads reported in other studies. Sediment yields were significantly reduced on both segments by the installation of BMPs, approximately 80% on one segment pair and 20% on the other. The average sediment yield (across the four segments) for the pre‐BMP year was 138 Mg/ha or 120 Mg/km of road. By extrapolating these average yields across the 479 km of unpaved roads in the Stillwater Creek Watershed and comparing it to estimated sediment yields for other land uses obtained from other sources, we conclude that unpaved roads may contribute up to 35% of the total sediment load to Stillwater Creek.     

Characterization of total volatile organic compound emissions from paints

Recently, Homeswest in Western Australia and Murdoch University developed a project to construct low allergen houses (LAH) in a newly developed suburb. All potential volatile organic compound (VOC) emission materials used in LAH are required to be measured before the construction of LAH, to ensure they are low VOCs emission materials. To protect people sensitive to exposure to VOCs it is important to evaluate and select low VOCs emitting paints. In this paper, therefore, twelve different paints provided by local manufacturers were selected for analysis to characterize total volatile organic compounds (TVOC) emissions. Emissions of TVOCs from six organic solvent-soluble paints and six water-soluble paints were evaluated using a small test chamber under controlled temperature, relative humidity and air exchange rates. The major volatile organic compounds in these paints were also identified. The time dependence of TVOC emissions from paint products in the chamber was evaluated. TVOC emissions from organic solvent-soluble and water-soluble paints were compared. The influence of air exchange rate on the TVOC concentrations emitted from organic solvent-soluble and water-soluble paints was also investigated. A double-exponential equation was used to evaluate emission characteristics of TVOC from paint products. With this double-exponential model, the physical processes of TVOC emissions can be explained. A variety of emission parameters can be calculated and used to estimate real indoor TVOCs concentrations.     

Sources of pathogenic microorganisms and their fate during land application of wastes

The hazards associated with pathogens in land-applied animal and human wastes have long been recognized. Management of these risks requires an understanding of sources, concentrations, and removal by processes that may be used to treat the wastes; survival in the environment; and exposure to sensitive populations. The major sources are animal feeding operations, municipal wastewater treatment plant effluents, biosolids, and on-site treatment systems. More than 150 known enteric pathogens may be present in the untreated wastes, and one new enteric pathogen has been discovered every year over the past decade. There has been increasing demand that risks associated with the land treatment and application be better defined. For risks to be quantified, more data are needed on the concentrations of pathogens in wastes, the effectiveness of treatment processes, standardization of detection methodology, and better quantification of exposure.     

ESTIMATING MARYLAND CRITICAL AREA ACVS IMPACT ON FUTURE NONPOINT POLLUTION ALONG THE RHODE RWER ESTUARY1

ABSTRACT: This paper presents the results of an investigation of the effects of the Maryland Critical Area Act on generation of non-point source loads of phosphorus, nitrogen, and sediment to the Rhode River estuary. The Simple Method model, the Marcus and Kearney regression model, and the CREAMS model were used to estimate annual loads under: (1) present conditions, (2) maximum land use development allowable under the Act, and (3) two sets of future land use conditions that might occur if the Act were not in place. Results indicate that the Critical Area Act can reduce the present generation of nonpoint nutrient and sediment loadings 20–30 percent from the regulated area. These reductions can occur while preserving agricultural lands and allowing limited residential and urban development. The decrease in nutrient loadings is primarily dependent upon implementation and enforcement of agricultural best management practices (BMPs). The BMPs could reduce present agricultural nutrient loadings by 90 percent to a level comparable to loadings from residential areas. The estimated effectiveness of the Critical Area Act is even greater when compared to potential future nutrient loadings if development in the area remains unregulated. Unrestricted residential and urban development could increase nutrient loadings by 200 percent to 1000 percent as compared to controlled development under Critical Area Act guidelines. The Critical Area Act primarily prevents these future increases by severely limiting woodland cutting, with lesser results obtained by requiring urban BMPs.     

BIOECONOMIC ANALYSIS OF SELECTED CONSERVATION PRACTICES ON SOIL EROSION AND FRESHWATER FISHERIES1

ABSTRACT: Farmers can generate environmental benefits (improved water quality and fisheries and wildlife habitat), but they may not be able to quantify them. Furthermore, farmers may reduce their incomes from managing lands to produce these positive externalities but receive little monetary compensation in return. This study simulated the relationship between agricultural practices, water quality, fish responses to suspended sediment and farm income within two small watersheds, one of a cool water stream and one of a warm water stream. Using the Agricultural Drainage and Pesticide Transport (ADAPT) model, this study related best management practices (BMPs) to calculated instream suspended sediment concentrations by estimating sediment delivery, runoff, base flow, and streambank erosion to quantify the effects of suspended sediment exposure on fish communities. By implementing selected BMPs in each watershed, annual net farm income declined $18,000 to $28,000 (1 to 3 percent) from previous levels. “Lethal” fish events from suspended sediments in the cool water watershed decreased by 60 percent as conservation tillage and riparian buffers increased. Despite reducing suspended sediments by 25 percent, BMPs in the warm water watershed did not reduce the negative response of the fisheries. Differences in responses (physical and biological) between watersheds highlight potential gains in economic efficiency by targeting BMPs or by offering performance based “green payments.”     

The effects of multiple beneficial management practices on hydrology and nutrient losses in a small watershed in the Canadian prairies

Most beneficial management practices (BMPs) recommended for reducing nutrient losses from agricultural land have been established and tested in temperate and humid regions. Previous studies on the effects of these BMPs in cold-climate regions, especially at the small watershed scale, are rare. In this study, runoff and water quality were monitored from 1999 to 2008 at the outlets of two subwatersheds in the South Tobacco Creek watershed in Manitoba, Canada. Five BMPs-a holding pond below a beef cattle overwintering feedlot, riparian zone and grassed waterway management, grazing restriction, perennial forage conversion, and nutrient management-were implemented in one of these two subwatersheds beginning in 2005. We determined that >80% of the N and P in runoff at the outlets of the two subwatersheds were lost in dissolved forms, ≈ 50% during snowmelt events and ≈ 33% during rainfall events. When all snowmelt- and rainfall-induced runoff events were considered, the five BMPs collectively decreased total N (TN) and total P (TP) exports in runoff at the treatment subwatershed outlet by 41 and 38%, respectively. The corresponding reductions in flow-weighted mean concentrations (FWMCs) were 43% for TN and 32% for TP. In most cases, similar reductions in exports and FWMCs were measured for both dissolved and particulate forms of N and P, and during both rainfall and snowmelt-induced runoff events. Indirect assessment suggests that retention of nutrients in the holding pond could account for as much as 63 and 57%, respectively, of the BMP-induced reductions in TN and TP exports at the treatment subwatershed outlet. The nutrient management BMP was estimated to have reduced N and P inputs on land by 36 and 59%, respectively, in part due to the lower rates of nutrient application to fields converted from annual crop to perennial forage. Overall, even though the proportional contributions of individual BMPs were not directly measured in this study, the collective reduction of nutrient losses from the five BMPs was substantial.     

ROLE OF WATERSHED SUBDIVISION ON MODELING THE EFFECTIVENESS OF BEST MANAGEMENT PRACTICES WITH SWAT1

Distributed parameter watershed models are often used for evaluating the effectiveness of various best management practices (BMPs). Streamflow, sediment, and nutrient yield predictions of a watershed model can be affected by spatial resolution as dictated by watershed subdivision. The objectives of this paper are to show that evaluation of BMPs using a model is strongly linked to the level of watershed subdivision; to suggest a methodology for identifying an appropriate subdivision level; and to examine the efficacy of different BMPs at field and watershed scales. In this study, the Soil and Water Assessment Tool (SWAT) model was calibrated and validated for streamflow, sediment, and nutrient yields at the outlet of the Dreisbach (623 ha) and Smith Fry (730 ha) watersheds in Maumee River Basin, Indiana. Grassed waterways, grade stabilization structures, field borders, and parallel terraces are the BMPs that were installed in the study area in the 1970s. Sediment and nutrient outputs from the calibrated model were compared at various watershed subdivision levels, both with and without implementation of these BMPs. Results for the study watersheds indicated that evaluation of the impacts of these BMPs on sediment and nutrient yields was very sensitive to the level of subdivision that was implemented in SWAT. An optimal watershed subdivision level for representation of the BMPs was identified through numerical simulations. For the study watersheds, it would appear that the average subwatershed area corresponding to approximately 4 percent of total watershed area is needed to represent the influence of these BMPs when using the SWAT model.     

Pleasure Boatyard Soils are Often Highly Contaminated

The contamination in pleasure boatyards has been investigated. Measured concentrations of copper, zinc, lead, mercury, cadmium, tributyltin (TBT), the 16 most common polycyclic aromatic hydrocarbons (∑16 PAHs), and the seven most common polychlorinated biphenyls (∑7 PCBs) from investigations at 34 boatyards along the Swedish coast have been compiled. The maximum concentrations were 7,700 for Cu, 10,200, for Zn, 40,100 for Pb, 188 for Hg, 18 for Cd, 107 for TBT, 630 for carcinogenic PAHs, 1,480 for ∑16 PAHs, and 3.8 mg/kg DW for ∑7 PCB; all 10–2,000 higher than the Swedish environmental qualitative guidelines. In addition, the mean of the median values found at the 34 places shows that the lower guidance value for sensitive use of land was exceeded for the ∑7 PCBs, carcinogenic PAHs, TBT, Pb, Hg, and Cu by a factor of 380, 6.8, 3.6, 2.9, 2.2 and 1.7, respectively. The even higher guideline value for industrial use was exceeded for the ∑7 PCBs and TBT by a factor of 15 and 1.8, respectively. TBT, PAHs, Pb, Cd, and Hg are prioritized substances in the European Water Framework Directive and should be phased out as quickly as possible. Because of the risk of leakage from boatyards, precautions should be taken. The high concentrations measured are considered to be dangerous for the environment and human health and highlight the urgent need for developing and enforcing pleasure boat maintenance guidelines to minimize further soil and nearby water contamination.