Metal binding in soil cores and sediments in the vicinity of a dammed agricultural and industrial watershed

The environment is witnessing a downgrade caused by the amelioration of the industrial and agricultural sectors, namely, soil and sediment compartments. For those reasons, a comparative study was done between soil cores and sediments taken from two locations in the Qaraaoun reservoir, Lebanon. The soil cores were partitioned into several layers. Each layer was analyzed for several physicochemical parameters, such as functional groups, particle size distribution, ζ-potential, texture, pH, electric conductivity, total dissolved solids, organic matter, cation exchange capacity, active and total calcareous, available sodium and potassium, and metal content (cadmium, copper, and lead). The metal content of each site was linked to soil composition and characteristics. The two sites showed distinguishable characteristics for features such as organic matter, pH, mineral fraction, calcareous, and metal content. The samples taken toward the south site (Q1), though contain lower organic matter than the other but are more calcareous, showed higher metal content in comparison to the other site (Q2) (average metal content of Q1 > Q2; for Cd 3.8?>?1.8 mg/kg, Cu 28.6?>?21.9 mg/kg, Pb 26.7?>?19 mg/kg). However, the metal content in this study did not correlate as much to the organic matter; rather, it was influenced by the location of the samples with respect to the dam, the reservoir’s hydrodynamics, the calcareous nature of the soil, and the variation of the industrial and agricultural influence on each site.     

Evaluation of soil contamination in intensive agricultural areas by pesticides and organic pollutants: south-eastern Spain as a case study

A comprehensive survey of the occurrence and fate of pesticides and organic contaminants in soils from an intensive agricultural area devoted to horticultural production in plastic-based greenhouses has been performed to determine if the operation under integrated pest management practices has contributed to reduce the levels of these compounds. Almería province (south-eastern Spain) was selected for the case study. 38 agricultural soil samples (each sample corresponds to an independent private greenhouse) of areas working under integrated pest management (IPM) programs have been analyzed in order to evaluate their contamination fate. Sampling was designed to cover an area of about 400 km(2). Pesticides, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), phenolic compounds and di-(2-ethylhexyl)phthalate (DEHP) were monitored. The obtained results were compared to other studies reported in Spain and Europe. Among relevant persistent pesticides, DDTs and endosulfans were mainly found and the results indicated historical application, although recent application of endosulfan was rarely detected. PAHs were also found but to a lesser extent and derived from pyrogenic sources. DEHP levels were considerably higher in comparison to the other monitored analytes. The evaluation revealed that despite the use of IPM programs, pesticide and organic contaminants are still being detected in this type of agricultural soil, although at relatively low concentration levels. In general, the contamination rate was similar or lower in comparison to other agricultural areas from nearby regions or countries. However, further monitoring studies should be carried out to establish the possible reduction in contamination by the selected compounds.     

Small effects of a large sediment contamination with heavy metals on aquatic organisms in the vicinity of an abandoned lead and zinc mine

The effects of the long-term contamination of water reservoirs with mine effluents were investigated at an abandoned mine site in Upper Silesia, southern Poland. The studies covered metal content and mobility in bottom sediments as well as water chemistry in relation to the content of metals in selected macrophytes and their physiology and the composition of phyto- and zooplankton communities. Although it is 40 years since mining ceased, reservoir sediments are still heavily contaminated with cadmium, zinc and lead with concentrations (mg/kg), which vary roughly between 130–340, 10,000–50,000 and 4,000–12,000, respectively. About 50–80 % of these elements are associated with the reducible phase, and only a small percentage, <10 %, is present in the most mobile exchangeable phase. Despite the high total metal concentration in sediments, their content in the submerged plants Myriophyllum spicatum and the emerged plants Phragmites australis was low. The observed effects of heavy metal contamination on photosynthetic activity in the leaves of P. australis were negligible, whereas those in M. spicatum show up only as a difference in the distribution of photosynthetic activity in leaves of different ages, which seems to be related to the very good water quality and to the generally small concentrations of metals in pond water. The physicochemical properties of water also seem to control the presence of planktonic species more than does sediment contamination. However, a shift toward groups of species known to be more resistant to heavy metals (diatoms, green algae and Rotifera) indicates some adaptative changes related to the long-lasting contamination of ponds.     

Mutagenicity assessment of contaminated soil in the vicinity of industrial area

In the industrial area of Chinhat, Lucknow (India) wastewater coming from pesticide manufacturing and other industries is used to irrigate the agricultural crops. This practice has been polluting the soil and pollutants might reach the food chain. Gas chromatographic analysis revealed the presence of certain organochlorine pesticides in soil samples. Samples were extracted using different solvents, i.e., hexane, acetonitrile, methanol, chloroform, and acetone (all were HPLC-grade, SRL, India). Soil extracts were assayed for mutagenicity using Ames Salmonella/mammalian microsome test. Mutagenicity was observed in the test samples and TA98 was the most responsive strain for all the soil extracts (irrigated with wastewater) in terms of mutagenic index in the presence (+S9) and absence (−S9) of metabolic activation. In terms of slope (m) of linear dose–response curve for the most responsive strain TA98 exhibited highest sensitivity against the soil extracts in the presence and absence of S9 fraction. Hexane-extracted soil sample (wastewater) exhibited maximum mutagenicity in terms of net revertants per gram of soil in the presence and absence of S9 mix as compared to the other soil extracts. Groundwater-irrigated soil extracts displayed low level of mutagenicity as compared to wastewater-irrigated soil. The soil is accumulating a large number of pollutants due to wastewater irrigation and this practice of accumulation has an adverse impact on soil health.     

Assessing soil and groundwater contamination in a metropolitan redevelopment project

The purpose of this study was to assess contaminated soil and groundwater for the urban redevelopment of a rapid transit railway and a new mega-shopping area. Contaminated soil and groundwater may interfere with the progress of this project, and residents and shoppers may be exposed to human health risks. The study area has been remediated after application of first remediation technologies. Of the entire area, several sites were still contaminated by waste materials and petroleum. For zinc (Zn) contamination, high Zn concentrations were detected because waste materials were disposed in the entire area. For petroleum contamination, high total petroleum hydrocarbon (TPH) and hydrocarbon degrading microbe concentrations were observed at the depth of 7 m because the underground petroleum storage tank had previously been located at this site. Correlation results suggest that TPH (soil) concentration is still related with TPH (groundwater) concentration. The relationship is taken into account in the Spearman coefficient (α).     

Assessing soil lead contamination in Dallas Texas

During the summer of 1982, the U.S. Environmental Protection Agency conducted a comprehensive multimedia environmental monitoring program in the vicinity of two secondary lead smelters and at one reference site in Dallas, Texas. This monitoring program included a major soils investigation with the collection and analysis of over 2700 soil samples. In addition, approximately 1000 blood and 840 house dust samples were collected and analyzed for their lead content.Utilizing geostatistics and the data obtained from a portion of the soil samples, isopleths of constant soil lead concentrations within each of the three monitoring sites were identified. Presented are the soil monitoring strategy and the geostatistical techniques selected for identifying the distributions of soil lead patterns at each of the three monitoring sites. In addition, the soil sampling and analytical methods used, the sample handling and preparation procedures, and the geostatistical results obtained are identified.     

Characterization of soil contamination by lead around a former battery factory by applying an analytical hybrid method

Former battery factories have created environmental and health problems for years and the exposure to lead in surface soils has been underestimated. Nonetheless, the identification of lead contamination and its spatial distribution is crucial. The determination of heavy metals in soils can be performed using inductively coupled plasma mass spectrometry (ICP-MS). However, alternative techniques such as X-ray fluorescence (XRF) have been used lately in environmental studies since measurements can be taken in the field in a prompt manner, despite its lower accuracy. In this study, a former battery factory site in Monterrey, Mexico, has been studied in order to detect lead contamination. Soil samples were assessed for contamination by using an analytical hybrid method that comprises both analytical techniques, namely, ICP-MS and XRF. Samples were taken in 215 locations and, after a simple homogenization process, they were analyzed by using a portable XRF device. Within those 215 sampling points, 25 samples were analyzed concurrently by using ICP-MS according to international sampling guidelines. Results obtained were adjusted in order to define an analytical hybrid method, which encompasses the advantages of each technique. An improved characterization was achieved by using the proposed analytical hybrid method since maps of lead distribution and calculated areas of concern showed better predictability. The combination of spectroscopic techniques is of great applicability for environmental agencies and decision makers.     

Impacts of two best management practices on Pb weathering and leachability in shooting range soils

This study investigated the impacts of two best management practices (BMPs) recommended by US Environmental Protection Agency on Pb weathering and leachability in shooting range soils. The two BMPs included replacing soil berm with sand berm and periodically removing bullets or shot from a berm. A column experiment corresponding to the first BMP was conducted by mixing the bullets with sand/soil, or placing bullets on the surface of sand/soil. After a 16–18-week incubation under high or low rainfall simulations, total Pb concentrations in sand were lower than that in soil. Total leachable Pb in sand (8.48 and 5.52 μg?kg^?1) was also lower than that in soil (60.0 and 30.4 μg?kg^?1) when bullets were mixed with sand/soil; however, they were comparable when bullets were placed on the sand/soil surface. These results indicate that lower Pb concentration in the sand than in soil may be attributed to reduced weathering of bullets. Mechanical removal of Pb bullets in the field transferred Pb from large to finer particles, increasing total Pb in the soil (<2 mm) from 2,170 to 5,000 mg?kg^?1. In contrast, mechanical removal of Pb shot effectively reduced the shot in the soil by 86–92 %. Thus, we concluded that, while replacing soil berm with sand berm can slow down Pb weathering, it may increase Pb leachability in the long term. Removal of Pb bullets and Pb shot can be effective, but caution needs to be exercised to minimize the adverse impacts, especially in pistol/rifle ranges because of increased total Pb content in the soil.     

Methane oxidation and abundance of methane oxidizers in tropical agricultural soil (vertisol) in response to CuO and ZnO nanoparticles contamination

There is worldwide concern over the increase use of nanoparticles (NPs) and their ecotoxicological effect. It is not known if the annual production of tons of industrial nanoparticles (NPs) has the potential to impact terrestrial microbial communities, which are so necessary for ecosystem functioning. Here, we have examined the consequences of adding the NPs particularly the metal oxide (CuO, ZnO) on CH₄ oxidation activity in vertisol and the abundance of heterotrophs, methane oxidizers, and ammonium oxidizers. Soil samples collected from the agricultural field located at Madhya Pradesh, India, were incubated with either CuO and ZnO NPs or ionic heavy metals (CuCl₂, ZnCl₂) separately at 0, 10, and 20 μg g^?1 soil. CH₄ oxidation activity in the soil samples was estimated at 60 and 100 % moisture holding capacity (MHC) in order to link soil moisture regime with impact of NPs. NPs amended to soil were highly toxic for the microbial-mediated CH₄ oxidation, compared with the ionic form. The trend of inhibition was Zn 20?>?Zn 10?>?Cu 20?>?Cu 10. NPs delayed the lag phase of CH₄ oxidation to a maximum of 4-fold and also decreased the apparent rate constant k up to 50 % over control. ANOVA and Pearson correlation analysis (α?=?0.01) revealed significant impact of NPs on the CH₄ oxidation activity and microbial abundance (p?<?0.0001, and high F statistics). Principal component analysis (PCA) revealed that PC1 (metal concentration) rendered 76.06 % of the total variance, while 18.17 % of variance accounted by second component (MHC). Biplot indicated negative impact of NPs on CH₄ oxidation and microbial abundance. Our result also confirmed that higher soil moisture regime alleviates toxicity of NPs and opens new avenues of research to manage ecotoxicity and environmental hazard of NPs.     

Effect of land use land cover change on soil erosion potential in an agricultural watershed

Universal soil loss equation (USLE) was used in conjunction with a geographic information system to determine the influence of land use and land cover change (LUCC) on soil erosion potential of a reservoir catchment during the period 1989 to 2004. Results showed that the mean soil erosion potential of the watershed was increased slightly from 12.11 t ha^???1 year^???1 in the year 1989 to 13.21 t ha^???1 year^???1 in the year 2004. Spatial analysis revealed that the disappearance of forest patches from relatively flat areas, increased in wasteland in steep slope, and intensification of cultivation practice in relatively more erosion-prone soil were the main factors contributing toward the increased soil erosion potential of the watershed during the study period. Results indicated that transition of other land use land cover (LUC) categories to cropland was the most detrimental to watershed in terms of soil loss while forest acted as the most effective barrier to soil loss. A p value of 0.5503 obtained for two-tailed paired t test between the mean erosion potential of microwatersheds in 1989 and 2004 also indicated towards a moderate change in soil erosion potential of the watershed over the studied period. This study revealed that the spatial location of LUC parcels with respect to terrain and associated soil properties should be an important consideration in soil erosion assessment process.     

The source of DDT and its metabolites contamination in Turkish agricultural soils

The concentration and impact of 1,1,1-trichloro-2,2-bis(4-chlorophenyl)-ethane (DDT) and its metabolites (DDE: 1,1-dichloro-2,2-bis(4-chlorophenyl)ethylene) on the environment was expected to decrease after its ban in the mid-1980s. Unfortunately, DDT contamination via its presence as an impurity in dicofol (2,2,2-trichloro-1,1-bis(4-chlorophenyl)ethanol) has led to a new source of contamination. This is particularly true especially in cotton production in Söke Plain, Turkey, where difocol-based pesticides are being used. The aim of this research was to investigate the extent and source of DDT contamination in cotton soils. Söke Plain soil samples were collected from 0–30, 30–60, and 60–90-cm depth and analyzed by GC/MS/MS. o,p′-DDT and p, p′-DDE were detected at 16.2 % and 17.6 % of the sites in the 0–30-cm depth of soils. In the 30–60 cm, p, p′-DDT (14.9 %), o, p′-DDE (8.1 %) and p, p′-DDE (2.7 %) were found in soil samples, and p, p′-DDT was the most prevalent with 9.5 % of the sampling sites. The dominant source of DDT particularly in the 60–90-cm depth was due to historic use of DDT. The presence of p, p′-DDE, o, p′-DDE and p,p′-DDT in the topsoil was attributed to recent dicofol applications.     

Influence of multi-industrial activities on trace metal contamination: an approach towards surface water body in the vicinity of Dhaka Export Processing Zone (DEPZ)

Industrial wastewater discharged into aquatic ecosystems either directly or because of inadequate treatment of process water can increase the concentrations of pollutants such as toxic metals and others, and subsequently deteriorate water quality, environmental ecology and human health in the Dhaka Export Processing Zone (DEPZ), the largest industrial belt of 6-EPZ in Bangladesh. Therefore, in order to monitor the contamination levels, this study collected water samples from composite effluent points inside DEPZ and the surrounding surface water body connected to effluent disposal sites and determined the environmental hazards by chemical analysis and statistical approach. The water samples were analysed by inductively coupled plasma mass spectrometry to determine 12 trace metals such as As, Ag, Cr, Co, Cu, Li, Ni, Pb, Se, Sr, V and Zn in order to assess the influence of multi-industrial activities on metal concentrations. The composite effluents and surface waters from lagoons were characterized by a strong colour and high concentrations of biochemical oxygen demand, chemical oxygen demand, electrical conductivity, pH, total alkalinity, total hardness, total organic carbon, Turb., Cl(-), total suspended solids and total dissolved solids, which were above the limit of Bangladesh industrial effluent standards, but dissolved oxygen concentration was lower than the standard value. The measurement of skewness and kurtosis values showed asymmetric and abnormal distribution of the elements in the respective phases. The mean trend of variation was found in a decreasing order: Zn > Cu > Sr > Pb > Ni > Cr > Li > Co > V > Se > As > Ag in composite industrial effluents and Zn > Cu > Sr > Pb > Ni > Cr > Li > V > As > Ag > Co > Se in surface waters near the DEPZ. The strong correlations between effluent and surface water metal contents indicate that industrial wastewaters discharged from DEPZ have a strong influence on the contamination of the surrounding water bodies by toxic metals. The average contamination factors were reported to be 0.70-96.57 and 2.85-1,462 for industrial effluents and surface waters, respectively. The results reveal that the surface water in the area is highly contaminated with very high concentrations of some heavy/toxic metals like Zn, Pb, Cu, Ni and Cr; their average contamination factors are 1,460, 860, 136, 74.71 and 4.9, respectively. The concentrations of the metals in effluent and surface water were much higher than the permissible limits for drinking water and the world average concentrations in surface water. Therefore, the discharged effluent and surface water may create health hazards especially for people working and living inside and in the surrounding area of DEPZ.     

Characteristics and distribution of analyzed metals in soil profiles in the vicinity of a postflotation waste site in the Bukowno region, Poland

The lead–zinc industry in the Bukowno region of southern Poland has polluted the surface layer of the surrounding soils mainly with lead (Pb), cadmium (Cd), zinc (Zn), arsenic (As), and thallium (Tl). Analysis of six soil profiles, taken on the east side of the postflotation waste site of the Mining and Metallurgical Plants ZGH "Boles?aw" in Bukowno, showed that they were podzol soils, taking form of loose sands with neutral pH and reducing conditions. Concentration of organic matter in the horizons ranged from 2 to 80 %. The main components of the mineral soil were quartz, carbonates, K-feldspars, plagioclases, and micas (sericite). The highest total concentrations of metals were found in the O, A, and B horizons. Over 90 % of the Cd content, 80 % of the Pb content, 60 % of the Zn content, ～60 % of the Tl content, and 20 % of the As content occurred as mobile forms. The corresponding total concentrations were 10 mg/kg Cd, 922 mg/kg Pb, 694 mg/kg Zn, <1 mg/kg Tl, and <5 mg/kg As. This can potentially be taken up from the soil and transported in the trophic chain. Comparing the total metal content with the legal limits in Poland, it is observed, that the investigated soils exceeded the permissible levels of Cd, Pb, and Zn for agricultural soils. Arsenic and Tl are not reflected in the chemical quality of soil classifications.     

Nematode community structure in the vicinity of a metallurgical factory

Soil nematode communities (taxa composition, trophic structure, ecological indices) in the area of metallurgical factory (Oravské ferozliatinárske závody) in ?iroká, Northern Slovakia were investigated in 2009. The factory belongs to main sources of emissions originated by ferroalloy production in this region. Four sites (meadows) were selected in a downwind direction from the factory: site A was located 0.85 km far from the factory, and the other sites were maintained in approximately 2-km intervals from each other. Chemical analysis of soil samples showed low concentrations of heavy metals (As, Cd, Cr, Cu, Ni, Pb and Zn), with all values being under Slovak limit concentrations of heavy metals in soils. Only the Cd content in the soil sample from site A slightly exceeded the allowable threshold, but it was decreasing with the distance from the factory, similarly as remaining metals except Cr, with slightly increasing trend of concentration. Within 64 identified nematode genera, the Helicotylenchus, Paratylenchus, Pratylenchus, Acrobeloides, Cephalobus and Rhabditis were most common and eudominant. This was clearly reflected on the trophic structure of nematode communities, where plant feeding nematodes and bacteriovorous prevailed. Significant negative correlation (P?相似文献   

The determination of the extractability of selected elements from agricultural soil

Concentrations of Ag, Al, Ba, Cd, Co, Cr, Cu, Fe, K, Mn, Na, Ni, Pb, Sr, and Zn—isolated by sequential extraction steps from apple orchard soil—were analyzed by inductively coupled plasma-atomic emission spectroscopy and compared to the total amount of metal in soil determined by XRF. The extractable amount of each metal was calculated by the extraction yields of the four steps. The LODs of the different elements in all extracts ware below 3 μg/L except for Ba (steps 1 and 2), Cu (step 1), Fe (all steps), K (steps 1–3), Mn (step 2), Na (steps 1–3), Ni (step 1), Pb (steps 1 and 4), and Zn (steps 1 and 2). The highest LOD (>10 μg/L) was found for Fe, K, and Na (step 1). The recovery of all metals after four sequential extraction steps was 90–112%. The repeatability (<1.1%), the intermediate precision (<5.3%), the day-to-day reproducibility (<6.2%), and the overall uncertainty of measurement (approximately 4–8.5%) for all analyzed metals supports the choice of the method used.     

Status of insecticide contamination of soil and water in Haryana, India

Twelve samples each of soil and ground water were collected from paddy-wheat, paddy-cotton, sugarcane fields and tube wells from same or near by fields around Hisar, Haryana, India during 2002–2003 to monitor pesticide residues. Residues were estimated by GC-ECD and GC-NPD systems equipped with capillary columns for organochlorine, synthetic pyrethroid and organophosphate insecticides. In soil, HCH (0.002–0.051 μg g⁻¹), DDT (0.001–0.066 μg g⁻¹), endosulfan (0.002–0.039 μg g⁻¹) and chlordane (0.0002–0.019 μg g⁻¹) among organochlorines, cypermethrin (0.001–0.035 μg g⁻¹) and fenvalerate (0.001–0.022 μg g⁻¹) among synthetic pyrethroids and chlorpyriphos (0.002–0.172 μg g⁻¹), malathion (0.002–0.008 μg g⁻¹), quinalphos (0.001–0.010 μg g⁻¹) among organophosphates were detected. Dominant contaminants were DDT, cypermethrin and chlorpyriphos from the respective groups. In water samples, HCH, DDT, endosulfan and cypermethrin residues were observed frequently. Only chlorpyriphos among organophosphates was detected in 10 samples. On consideration of tube well water for drinking purpose, about 80% samples were found to contain residues above the regulatory limits.     

Standard use conditions of terrestrial gastropods in active biomonitoring of soil contamination

The rehabilitation of contaminated sites is becoming a rising preoccupation which requires the knowledge of their past before realization of a suitable remediation. Physicochemical analysis must be realized jointly with the use of bioindicator organisms, which, owing to their bioaccumulation capacities, will reveal the bioavailability of metals in soils. Among terrestrial invertebrates, gastropods like Helix aspersa aspersa possess an important organotropism for metals in their digestive gland and they can be used in active biomonitoring. During in situ monitoring, two parameters are tested: growth and accumulation of Fe, Mn, Zn, Cu, Cd, Ni, Pb, and Cr in viscera of snails. Environmental conditions, like humidity or autochthonous vegetation, are able to modify growth or bioaccumulation. In order to remove the variation of these factors, microcosms previously used must be improved: they were equipped with porous candles, which continually humidify soil. Concerning vegetation, an experimental plan was realized to determine the combination of food with the best compromise between growth and bioaccumulation: the combination clover-snail feed was chosen. Thus, in situ, the experimental environment will be repeated in all investigated sites and used to allow follow up of their contamination levels and intercomparison between different sites.     

Effect of heavy metal contaminated shooting range soils on mycorrhizal colonization of roots and metal uptake by leek

We grew leek (Allium porrum) in soils of two shooting ranges heavily contaminated with heavy metals in the towns of Zuchwil and Oberuzwil in Switzerland as a bioassay to test theactivity of arbuscular mycorrhizal (AM) fungi in these soils.Soil samples were taken from (1) front of the shooting house(HOUSE), (2) the area between house and target (FIELD) and (3) the berm (BACKSTOP). Samples of Ribwort plantain (Plantagolanceolata) growing naturally within the shooting ranges werealso collected and the colonization of its roots by mycorrhizalfungi was measured. The number of AM spores in the soils wassignificantly reduced concomitant with the increase in thedegree of soil contamination with metals. In Zuchwil,mycorrhizal fungi equally colonized roots of Ribwort plantainsampled from BACKSTOP and HOUSE. In Oberuzwil, however, plantsfrom BACKSTOP had lower colonization when compared with thosesampled from HOUSE. Colonization of leek was strongly reducedin the BACKSTOP soil of Zuchwil and slightly reduced in theBACKSTOP soil of Oberuzwil when compared with plants grown inrespective HOUSE soil. Concentrations of Cd, Cr, Cu, Ni, Pb andZn in the leaves of leek grown in the BACKSTOP soil was withinthe range considered toxic for human consumption. This pointsto the high degree of bio-availability of these metal in thesesoils. Significant decrease in the number of mycorrhizal sporesin the BACKSTOP soils in Zuchwil and the low colonization ofleek roots grown in these soils point to possible changes inthe species diversity of mycorrhizal fungi in these soils.