Magnetic susceptibility measurements as proxy method to monitor soil pollution: development of experimental protocols for field surveys

In the framework of the development of new methods for measuring and monitoring soil pollution, this paper deals with the use of magnetic methodologies to monitor the heavy metals presence in soils. In particular it shows a procedure for collecting magnetic susceptibility measurements in order to interpret them as proxy variable for monitoring heavy metals in soils. Magnetic measurements are carried out using a magnetic susceptibility meter with two different probes for in situ field surveys. The experimental procedure is divided in two parts. In the first part we carry out laboratory tests aimed to evaluate, for both the probes, the effective investigation depth for soil, the measurement reproducibility under different conditions, and the influence of water content. We complete this part comparing in situ measurements obtained by means of two probes with different characteristics. In the second part we carry out tests to evaluate the relationships between heavy metal levels and magnetic susceptibility values of soil samples. We investigate the variability of the magnetic susceptibility measurements contaminating different soil samples with well known concentration of heavy metals. Moreover we study the correlation between magnetic susceptibility values and metal concentrations, determined by means of AAS, in soil samples collected during a field survey. Results suggest that a careful check of the experimental procedure play a crucial role for using magnetic susceptibility measurements for heavy metals in situ monitoring. This is very helpful both for improving the quality of data and for making simpler data interpretation.     

Soil tillage erosion estimated by using magnetism of soils—a case study from Bulgaria

A detailed field and laboratory study on small 0.84-ha test site of agricultural land near Sofia (Bulgaria) has been carried out in order to test the applicability of magnetic methods in soil erosion estimation in the particular case of strongly magnetic parent material. Field measurements of magnetic susceptibility were carried out with grid size of 6 m, resulting in 258 data points. Bulk soil material was gathered from 78 grid points. Natural, non-disturbed soil section was sampled near the agricultural field for reference profile of complete undisturbed soil. Surface susceptibility measurements reveal well-defined maxima down slope which, however, cannot be assigned directly to a certain depth interval, corresponding with susceptibilities along the non-disturbed soil profile. This is caused by the high magnetic susceptibility of the lithogenic coarse-grained magnetic fraction. Non-uniqueness is resolved by using magnetic susceptibility of coarse (1 mm >?d?> 63 μm) and fine (d < 63 μm) mechanical fractions and the parameter Δχ = 100*(χ _coarse???χ _fine)/χ _bulk (%). It shows increased values in the C-horizon of undisturbed soil profile, which corresponds to a certain part of the studied area. After the application of an empirical model to predict the values of magnetic parameter after tillage homogenization and removal of soil material from the surface, the amount of soil loss is estimated.     

Geostatistical 3-dimensional integration of measurements of soil magnetic susceptibility

In soil magnetometry, two types of measurements are usually performed. The first type is measurements performed on the soil surface, frequently using an MS2D sensor. The second type includes measurements of magnetic susceptibility carried out in the soil profile, usually to a depth of about 30 cm. Up to now, such measurement results were analyzed separately. However, it is possible and advantageous to integrate these two types of measurements. The goal of the study was to integrate measurements of magnetic susceptibility performed on the soil surface and in the soil profile. More specifically, the goal was to obtain 3-dimensional spatial distributions of magnetic susceptibility of the topsoil horizon. Results show that it is possible to effectively integrate measurements of magnetic susceptibility performed on the soil surface and in the soil profile. Moreover, the 3-dimensional spatial distribution that is obtained shows the magnetic susceptibility of the top 20 cm of soil, which includes the soil horizons where most of the heavy metals are accumulated. The analysis of such a spatial distribution can be very helpful in delineating areas where the heightened magnetic susceptibility is a result of the influence of anthropogenic pollution from those areas where it results from lithogenic origin. It is possible to investigate where the volumes of soil with heightened magnetic susceptibility are located in the soil profile and in this way investigate which characteristic type of soil profile it is.     

Soil heavy metal contamination in an industrial area: analysis of the data collected during a decade

Soil contamination by heavy metals has become a serious problem mainly because, above certain concentrations, all metals have adverse effects on human health. In particular, the accumulation of heavy metals in agricultural soils leads to elevated uptake by crops and affects food quality and safety. In this paper, we present the results of a study carried out over a decade for evaluating the impact of a new industrial settlement in an area geared to agriculture and livestock and far from urban sites. We focus our study on the bioavailable fraction of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn in soil samples. Heavy metal concentrations in soil are analysed with both univariate and multivariate statistical procedures. The main goal of this paper is the development of a statistical procedure, based on a mix of multivariate analysis, able to compare field surveys carried out during different years and to characterize spatial and temporal changes in soil heavy metals concentrations.     

Heavy metal contents and magnetic susceptibility of soils along an urban–rural gradient in rapidly growing city of eastern China

The accumulation of heavy metals (Cd, Cr, Cu, Pb and Zn) and magnetic minerals in soils along an urban-rural gradient in the rapidly growing Hangzhou City, Eastern China, was measured. The analytical results indicated that heavy metal concentrations, magnetic susceptibility (chilf) and saturation isothermal remnant magnetization (SIRM) in soils decreased with increasing distance from the urban center. The significant relationships existed between heavy metal concentrations, chilf and SIRM and distance from the urban center. The soils in the urban areas were enriched with Cd, Cu, Pb and Zn. Elevated concentrations of heavy metals (especially Cd and Zn) in urban areas indicated the evidence for the accumulation of heavy metal contaminants from anthropogenic activities. Enhanced heavy metal concentrations and magnetic susceptibility were located in the uppermost soil horizons (0-10 cm), decreasing downwards to background values. The significant positive correlations between the Tomlinson Pollution Load Index (PLI) and magnetic susceptibility and SIRM were observed in polluted soil samples. Strong positive correlation indicated that magnetic screening/monitoring provided a fast and non-destructive tool, which can be effectively used as a proxy to detect environmental pollution in rapidly growing urbanization regions affected by anthropogenic activities.     

Determination of chlorophyll-a amount in Golden Horn, Istanbul, Turkey using IKONOS and in situ data

The objective of this research was to explore an accurate and fast way of estimating chlorophyll-a amount, a water quality parameter (WQP), using IKONOS satellite sensor image and in situ measurements. Since the in situ data of WQPs are limited with the number of sampling locations, deriving a correlation between these measurements and remotely sensed image allows synoptic estimates of the related parameter over large areas even if the areas are in remote and inaccessible locations. In this study, simultaneously collected satellite image data and in situ measurements of chlorophyll-a were correlated using multivariate regression model. Different experiments were designed by changing the numbers and distributions of in situ measurements. Regression coefficients of each design and differences between model-derived data and in situ measurements were calculated to find out the optimum design to produce chlorophyll-a map of study region. Results illustrated that both the number and distribution of in situ measurements have impact on regression analysis, therefore should be selected attentively. Also, it is found that IKONOS imagery is an efficient and effective source to derive chlorophyll-a map of the large areas using limited number of ground measurements.     

Magnetic mapping of fly-ash pollution and heavy metals from soil samples around a point source in a dry tropical environment

The Singrauli region in the southeastern part of Uttar Pradesh, India is one of the most polluted industrial sites of Asia. It encompasses 11 open cast coalmines and six thermal power stations that generate about 7,500 MW (about 10% of India’s installed generation capacity) electricity. Thermal power plants represent the main source of pollution in this region, emitting six million tonnes of fly-ash per annum. Fly-ash is deposited on soils over a large area surrounding thermal power plants. Fly-ashes have high surface concentrations of several toxic elements (heavy metals) and high atmospheric mobility. Fly ash is produced through high-temperature combustion of fossil fuel rich in ferromagnetic minerals. These contaminants can be identified using rock-magnetic methods. Magnetic susceptibility is directly linked to the concentration of ferromagnetic minerals, primarily high values of magnetite. In this study, magnetic susceptibility of top soil samples collected from surrounding areas of a bituminous-coal-fired power plant were measured to identify areas of high emission levels and to chart the spatial distribution of airborne solid particles. Sites close to the power plant have shown higher values of susceptibility that decreases with increasing distance from the source. A significant correlation between magnetic susceptibility and heavy metal content in soils is found. A comparison of the spatial distribution of magnetic susceptibility with heavy-metal concentrations in soil samples suggests that magnetic measurements can be used as a rapid and inexpensive method for proxy mapping of air borne pollution due to industrial activity.     

变电站电磁环境监测布点建模仿真研究

针对变电站电磁环境自动监测站布点方案普遍存在的效率不高、科学性不足等问题,以某500 kV变电站电磁环境自动监测站选址为例,通过建模仿真得到该变电站工频电场和工频磁场的空间分布,并实测验证了仿真结果的准确性。通过统计该变电站工频电场和工频磁场的空间分布特征,提出了基于变电站空间场强分布特征的自动监测站布点方案,建议优先在场强中位数分界线附近区域布点,以更好地反映变电站电磁环境。研究结果可指导变电站电磁环境自动监测站选址,提高变电站电磁环境监测布点的科学性,提升监测效率。     

Prototyping a Vision for Inter-Agency Terrestrial Inventory and Monitoring: a Statistical Perspective

A demonstration project in Oregon examined the feasibility of combining Federal environmental monitoring surveys. An integrated approach should remove duplication of effort and reduce the possibility of providing apparently conflicting information to policy makers and the public. Data collection teams made photo interpretation measurements and on-site soil/vegetation/animal observations at locations that were selected from the Forest Inventory and Analysis (FIA), National Forest System (NFS) Region 6, and National Resource Inventory (NRI) surveys in a six-county area in Northern Oregon. The project demonstrated the feasibility of conducting a combined FIA/NFS/NRI survey and suggests an approach that will preserve the utility of the critical historical information from these surveys. We suggest a framework for estimating the extent of forest and range land that explains FIA/NRI differences and provides a common basis for both surveys. We suggest indicator and protocol criteria that will allow consistent national and regional estimates over all vegetation types, and stress the importance of including measurement repeatability in the design of the combined survey.     

某基岩区工业固体废物填埋场地递进式场地环境调查实例

针对某基岩区简易封场后的固体废物填埋场,采用多层次、递进式调查策略,配合使用地球物理探测、直压式土壤快速取样、现场快速检测等技术,分3个阶段开展填埋场及其周边环境调查。第1阶段,调查地质环境特征,开展地球物理探测;第2阶段,调查填埋物、渗滤液主要组分及对周边积水、农田土壤、民用井水的污染情况;第3阶段,划定重点污染区域,开展土壤和地下水污染调查。调查结果显示,填埋区已发生明显渗漏,对邻近区域土壤、地下水及地表积水造成了一定污染,但未对周边农用地土壤、民用井水质等产生不利影响,总体处于可控范围。提出,通过削减污染源,切断污染物迁移、暴露途径,消除已有污染影响,长期跟踪监测等多项管控治理措施进行综合整治。     

Infrared differential absorption Lidar (DIAL) measurements of hydrocarbon emissions

We report the application of an infrared (IR) differential absorption Lidar (DIAL) system (also capable of ultra violet measurements) built at the National Physical Laboratory (NPL), UK, to field measurements of total site emissions (controlled and fugitive) from petrochemical and landfill installations. The validation of the IR-DIAL was carried out via a series of controlled field experiments including comparison to GC analysis and tests against controlled methane releases from a test stack, all detailing agreements on the order of ±20%. In volatile organic compound (VOC) measurements at a UK petrochemical site it was found that the American Petroleum Institute's methodology of the time for calculating the emitted flux underestimated by a factor of 2.4. Also, in a similar field trial it was found that scaling traditional point measurements at easily accessible flanges and valves to represent all flanges and valves on a site led to an underestimation by a factor of 6. In addition to petrochemical examples we also report field measurements from a landfill site to demonstrate the advantageous of the DIAL technique for monitoring area emission sources. In this case study it was found that active (still being filled) cells resulted in significantly greater VOC emission rates (30 kg h(-1)) than closed (≤ 10 kg h(-1)).     

瑞士土壤环境监测网络构建与运行对中国的启示

“十三五”期间,中国初步构建了国家土壤环境监测网并开展了监测工作。当前,国家层面土壤环境监测网络的构建和运行还处于起步阶段,笔者选取土壤环境监测开展较为成熟的瑞士土壤环境监测网(NABO)作为研究对象,综述了NABO的技术体系及多年来的土壤环境监测结果,并结合中国土壤环境监测工作现状进行讨论,认为NABO在监测网络建立、指标选取、数据分析等方面建立了较为成熟的技术体系,未来中国国家土壤环境监测网可在此方面借鉴瑞士经验。     

Linking phosphorus export and hydrologic modeling: a case study in Central Italy

Soil erosion is an open topic, not only because soil fertility is lost, but also because nutrients are spilled into water bodies, thereby causing pollution. Research carried out in this field has amply described this process, but the interaction between these factors is complex and experimental research is needed to understand the production of loads of nutrients for different land uses. This paper describes a long-term monitoring case study using high-resolution rainfall data and runoff samples, carried out in the Lake Vico basin (Central Italy) to determine the phosphorus (P) export during erosive rainfall events. State of the art GIS-based basin characterization and advanced rainfall-runoff models are employed in order to describe the relationship between nutrient export and rainfall or runoff time distribution. Results show that the phosphorus export is strongly related to such time distributions, and less to the cumulative amount of rainfall or runoff.     

Determination of contaminant levels and remediation efficacy in groundwater at a former in situ recovery uranium mine

There has been increasing interest in uranium mining in the United States via in situ recovery techniques. One of the main environmental concerns with in situ uranium mining is the potential for spreading groundwater contamination. There is a dearth of detailed analysis and information regarding the outcome of in situ uranium mine remediation to ascertain the environmental impacts. Regulatory measurements performed at a Wyoming in situ uranium mine were collected and analysed to ascertain the efficacy of remediation and potential long term environmental impact. Based on the measurements, groundwater sweeping followed by reverse osmosis (RO) treatment proved to be a highly efficient method of remediation. However, injection of a reductant in the form of H(2)S after groundwater sweeping and RO did not further reduce the aqueous concentration of U, Mn, or Fe. Low concentrations of target species at monitoring wells outside the mined area appear to indicate that in the long term, natural attenuation is likely to play a major role at reductively immobilizing residual (after remediation) concentrations of U(VI) thus preventing it from moving outside the mined area. Our analysis indicates the need for additional monitoring wells and sampling in conjunction with long term monitoring to better understand the impacts of the different remediation techniques.     

The measurement procedure in the SEMONT monitoring system

The measurement procedure of the open area in situ electric field strength is presented, acquiring the real field data for testing of the Serbian electromagnetic field monitoring network (SEMONT) and its Internet portal. The SEMONT monitoring system introduces an advanced approach of wireless sensor network utilization for the continuous supervision of overall and cumulative level of electromagnetic field over the observed area. The aim of the SEMONT system is to become a useful tool for the national and municipal agencies for the environmental protection, regarding the electromagnetic pollution monitoring and the exposure assessment of the general population. Considering the public concern on the potentially harmful effects of the long-term exposure to electromagnetic radiation, as well as the public transparency principle that is incorporated into the Serbian law on non-ionizing radiation protection, the SEMONT monitoring system is designed for the long-term continuous monitoring, presenting real-time measurement results, and corresponding exposure assessment over the public Internet network.     

Soil erosion assessment and its correlation with landslide events using remote sensing data and GIS: a case study at Penang Island,Malaysia

In this paper, an attempt has been made to assess, prognosis and observe dynamism of soil erosion by universal soil loss equation (USLE) method at Penang Island, Malaysia. Multi-source (map-, space- and ground-based) datasets were used to obtain both static and dynamic factors of USLE, and an integrated analysis was carried out in raster format of GIS. A landslide location map was generated on the basis of image elements interpretation from aerial photos, satellite data and field observations and was used to validate soil erosion intensity in the study area. Further, a statistical-based frequency ratio analysis was carried out in the study area for correlation purposes. The results of the statistical correlation showed a satisfactory agreement between the prepared USLE-based soil erosion map and landslide events/locations, and are directly proportional to each other. Prognosis analysis on soil erosion helps the user agencies/decision makers to design proper conservation planning program to reduce soil erosion. Temporal statistics on soil erosion in these dynamic and rapid developments in Penang Island indicate the co-existence and balance of ecosystem.     

Developing a National Indicator of Soil Quality on U.S Forestlands: Methods and Initial Results

The Montreal Process was formed in 1994 to develop an internationally agreed upon set of criteria and indicators for the conservation and sustainable management of temperate and boreal forests. In response to this initiative, the Forest Inventory and Analysis (FIA) and Forest Health Monitoring (FHM) programs of the United States Department of Agriculture Forest Service have implemented soil measurements as part of a national monitoring program to address specific questions related to the conservation of soil and water resources. Integration of soil assessments into the national FIA program provides for systematic monitoring of soil properties across all forested regions of the U.S. using standardized collection, laboratory, and statistical procedures that are compatible with existing forest inventory data. The resulting information will provide quantitative benchmarks for regional, national, and international reporting on sustainable forest management and enhance our understanding of management effects on soil quality. This paper presents an overview of the FIA soil monitoring program, outlines the field and laboratory protocols as currently implemented, and provides examples of how these data may be used to assess indicators of sustainable management as defined by the Montreal Process.     

BTX measurements with diffusive samplers in the vicinity of a cokery: comparison between ORSA-type samplers and pumped sampling

In the framework of new European directives in the field of ambient air quality assessment specific requirements for measurement methods for benzene will be defined and have to be met in the future. In a residential area in the vicinity of a cokery a comprehensive monitoring programme for BTX compounds (benzene, toluene, xylenes) was carried out with diffusive samplers. Measurement results from 20 sites show a distinct spatial distribution of benzene concentrations which is caused by the emissions of the plant. Comparisons with two pumped measurement methods reveal excellent agreement in the case of benzene. An assessment of measurement uncertainty for the diffusive method is presented in terms of standard deviations from parallel measurements (precision) and by comparison with a reference method according to national and international standards. Data quality objectives required by an upcoming European directive for benzene can be met by diffusive sampling.     

基于稳健统计方法对实验室比对中土壤汞的质量控制指标研究

利用稳健四分位间距法和迭代法2种稳健统计方法,通过对全国31个省、自治区、直辖市范围内共334家环境监测单位开展土壤中汞的实验室间比对,对比对测定结果和质控数据进行统计分析,系统性地研究了土壤中汞的质量控制指标。建议实际监测工作中土壤汞的实验室间相对标准偏差范围为7%～19%,相对误差控制指标为±8%,低浓度水平下可适当放宽至±10%,加标回收率控制范围为81%～109%,为日常监测开展土壤汞的质量控制工作提供了评价依据,具有广泛的应用价值和较好的指导作用。     

土壤生态环境健康监测与评价技术现状与展望

综述了国内对土壤生态环境健康的研究进展,总结了传统土壤环境监测技术的不足,介绍了土壤生态环境健康监测技术,包括植物、动物、微生物等生态监测方法,旨在通过对各项技术的比较,了解各项监测技术对土壤健康监测和评价现状。对土壤生态环境健康监测与评价技术的发展趋势进行展望,提出未来需要对土壤生态健康监测技术进行标准化和定量化;开展多生物指标联合监测;结合遥感和物联网技术扩大土壤时空监测尺度,形成完整的土壤生态环境健康监测与评价体系,为环境管理部门有效监测土壤生态环境提供依据。