Workers’ Perceptions of Workplace Safety and Job Satisfaction

A lot of attention has beenfocused on workers ‘ perceptions of workplace safety but relatively little or no research has been done on the impact of job satisfaction on safety climate. This study investigated this relationship. It also examined the relationships between job satisfaction and workers’ compliance with safety management policies and accident frequency. A positive association was found between job satisfaction and safety climate. Workers who expressed more satisfaction at their posts had positive perceptions of safety climate. Correspondingly, they were more committed to safety management policies and consequently registered a lower rate of accident involvement. The results were thus consistent with the notion that workers ‘ positive perceptions of organisational climate influence their perceptions of safety at the workplace. The findings, which have implications in the work environment, are discussed.     

Paperwork at the service of safety? Workers’ reluctance against written procedures exemplified by the concept of ‘seamanship’

Efforts to reduce accidents in seafaring have led to a proliferation of procedures such as workplace assessments and checklists. Unfortunately, the demand for written procedures is perceived by many seafarers as counteracting the use of common sense, experience, and professional knowledge epitomized in the concept of seamanship. Their objections suits well in Dreyfus and Dreyfus’ model of skill acquisition: while novices steadily follow context-independent rules, the expert’s behaviour goes beyond analytical rationality, and is situational, experience-based, and intuitive. The Aristotelian concept of phronesis brings us further by adding a reflexive, social and ethical dimension to the expert’s knowledge. Phronesis is, like expertise, contextual, experience-based knowledge; but it is also value- and action-oriented. While phronesis rests on value rationality, ‘techne’ (know how’), another Aristotelian concept, is based on instrumental rationality and is production-oriented. Phronesis is, inter alia, choosing the proper techne for the circumstances. However, the seamen fear a development where techne predominates at the expanse of phronesis. The case raises issues on which conditions are enabling or hindering written procedures to be perceived as a tool at the service of safety.     

Parents’ work injuries and children’s mental health: The moderating role of children’s work centrality

Introduction: The purpose of this study is to explore the relationship between parents’ work-related injuries and their children’s mental health, and whether children’s work centrality – the extent to which a child believes work will play an important part in their life – exacerbates or buffers this relationship. Method: We argue that high work centrality can exacerbate the relationship between parental work injuries and children’s mental health, with parental work injuries acting as identity-threatening stressors; in contrast, high work centrality may buffer this relationship, with parental work injuries acting as identity-confirming stressors. We test this relationship with a sample of Canadian children (N = 4,884, 46.2% female, M age = 13.67 years). Results:Children whose parents had experienced more frequent lost-time work-related injuries reported worse mental health with high work centrality buffering this negative relationship. Conclusions: Our study highlights the vicarious effects of work injuries on salient others, specifically parental work injuries on children’s mental health, as well as the role of work centrality in shaping children’s sense-making and expectations about the consequences of work.     

Performance of Firefighters’ Protective Clothing After Heat Exposure

Heat and mechanical protection properties of 6 fabric combinations commonly used in firefighters’ protective clothing were assessed before and after different heat treatment. It was shown that after heat exposure, the values obtained were generally lower than in the original state. The mechanical properties of the materials were more affected by heat than by heat protective properties. In 2 cases, degradation started before a visible change in the material could be observed, which might be potentially dangerous for the end user who will not realize the alteration of the material.     

Assessment of the effect of welding fumes on welders’ cognitive failure and health-related quality of life

Introduction. This study examined whether cognitive symptoms and health-related quality of life can be affected by welding fume exposure. Method. Participants consisted of welders (n?=?40) and welder assistants (n?=?25) from welding units as the exposed group, and office workers (n?=?44) as the non-exposed group. All participants were studied using ambient air monitoring and two types of questionnaires: the Cognitive Failures Questionnaire (CFQ) and the 36-item Short Form Health Survey (SF-36). Results. Welders and welder assistants were exposed to higher concentrations of all airborne metals than office employees, except for aluminum and chromium (p?p?M (SD)?=?54.84 (17.88)). The relationships between total CFQ score and the measured concentration of nickel at peak work rate was significant for welders. Conclusion. Cognitive symptoms and health-related quality of life were not related to the measures of welding fume exposure and further research should be performed to find other influencing factors.     

Prevalence of Musculoskeletal Disorders at Workplaces in the People’s Republic of China

This paper presents 2 musculoskeletal disorders questionnaire surveys in 10 different Chinese occupational groups. Data collected from 1,603 workers using a modified Nordic musculoskeletal disorders symptom questionnaire showed that the 12-month prevalence of musculoskeletal disorders, particularly in the low back and shoulder-neck regions, was high at many Chinese workplaces. Significant differences existed between occupational groups. Assembly workers usually had higher neck-shoulder complaints compared to workers in most other occupations. However, the nature of assembly seemed also to influence the prevalence rate. Workers at a cassette recorder and a TV set assembly plant appeared to have more neck complaints compared with a group of thermos flask assemblers.     

The analysis of influence of individual and environmental factors on 2-wheeled users’ injuries

Objective: Powered 2-wheeled motor vehicles (PTWs) are one of the most vulnerable categories of road users. Bearing that fact in mind, we have researched the effects of individual and environmental factors on the severity and type of injuries of PTW users. The aim was to recognize the circumstances that cause these accidents and take some preventive actions that would improve the level of road safety for PTWs.

Methods: In the period from 2001 to 2010, an analysis of 139 road accidents involving PTWs was made by the Faculty of Transport and Traffic Engineering in Belgrade. The effects of both individual (age, gender, etc.) and environmental factors (place of an accident, time of day, etc.) on the cause of accidents and severity and type of injuries of PTWs are reported in this article. Analyses of these effects were conducted using logistic regression, chi-square tests, and Pearson's correlation.

Results: Factors such as categories of road users, pavement conditions, place of accident, age, and time of day have a statistically significant effect on PTW injuries, whereas other factors (gender, road type; that is, straight or curvy) do not. The article also defines the interdependence of the occurrence of particular injuries at certain speeds. The results show that if PTW users died of a head injury, these were usually concurrent with chest injuries, injuries to internal organs, and limb injuries.

Conclusions: It has been shown that there is a high degree of influence of individual factors on the occurrence of accidents involving 2-wheelers (PTWs/bicycles) but with no statistically significant relation. Establishing the existence of such conditionalities enables identifying and defining factors that have an impact on the occurrence of traffic accidents involving bicyclists or PTWs. Such a link between individual factors and the occurrence of accidents makes it possible for system managers to take appropriate actions aimed at certain categories of 2-wheelers in order to reduce casualties in a particular area. The analysis showed that most of the road factors do not have a statistically significant effect on either category of 2-wheeler. Namely, the logistic regression analysis showed that there is a statistically significant effect of the place of accident on the occurrence of accidents involving bicyclists.     

Exposure-based assessment of the effectiveness of Michigan’s graduated driver licensing nighttime driving restriction

The objective of the study is to assess the effectiveness of Michigan’s graduated driver licensing (GDL) program in terms of nighttime driving restriction. The research uses the quasi-induced exposure technique to capture and represent the exposure and accident risk change of the impacted driver groups due to the implementation of the GDL program. Six years of Michigan accident data were used, including three years before the GDL implementation and three years after. The effectiveness of Michigan’s GDL program in terms of nighttime driving is reflected in several dimensions: for the impacted drivers (16- and 17-year-olds), there is a significant reduction of exposure compared to the reference group and a decrease in the relative accident involvement ratio (thus a reduced accident risk); and examination of time of day distributions of impacted teenage drivers shows that there is a conspicuous percentage drop of impacted teenage drivers at the point where the nighttime curfew starts. With the implementation of the GDL program, the affected group tends to drive increasingly more in the several hours prior to the restricted time period to avoid violating the curfew law. As opposed to the traditional exposure measurements such as population or licensed drivers, quasi-induced exposure technique has the capability of depicting the accident propensity and quantifying exposure change from different age groups.     

The unintended impact of helmet use on bicyclists’ risk-taking behaviors

Introduction: Safety is a critical factor in promoting sustainable urban non-motorized travel modes like bicycles. Helmets have shown to be effective in reducing injury severity in bicycle crashes, however, their effects on bicyclists’ behaviors still requires deeper understanding, especially amid the emerging trend of using shared bicycles. Risk compensation effects suggest that bicyclists may offset perceived gains in safety from wearing a helmet by increasing risk-taking behaviors. A better understanding of these compensation effects can be useful in assessing various bicycle safety related programs. Method: Using a sample of 131 bicyclists from the San Francisco Bay area, this research studies how bicyclists respond with respect to risk-taking behaviors under various urban-street conditions, as a function of helmet use. Study participants were each shown 12 videos, shot in Berkeley, California, from the perspective of a bicyclist riding behind another bicyclist. A fractional factorial experiment design was used to systematically vary contextual attributes (e.g., speed, bike lane facilities, on-street parking, passing vehicles) across the videos. After each video, participants were asked to indicate if they would overtake the bicyclist in the video. With the help of data adaptive estimation techniques, targeted maximum likelihood estimation (TMLE) was applied to estimate the average risk difference between helmeted users and non-users, controlling for self-selection effects. Individual-based nonparametric bootstrap was performed to assess the uncertainty associated with the estimator. Results: Our findings suggest, on average, individuals more likely to wear a helmet are 15.6% more likely to undertake a risky overtaking maneuver. Practical Applications: This study doesn’t try to oppose mandatory helmet laws, but rather serves as a cautionary warning that road safety programs may need to consider strategies in which unintended impact of bicycle helmet use can be mitigated. Moreover, our findings also provide additional evaluation component when it comes to the cost-benefit assessment of helmet-related laws.     

Biomechanical Consequences of the Hand’s Action on Unstable Handle

The concept of muscular stabilization refers to imposing active muscular constraints on the joint degrees of freedom that are not used in a given motor task and the stabilization of unstable working objects. The human organism bears considerable cost due to the realization of this process, which in the case of muscular static force developed in relation to an unstable working object reaches approximately 24%. The aim of this article is twofold: (a) to determine the useful efficiency of the hand-working object system with an unstable handle in relation to the released muscular force and power dynamics and (b) to identify the relative contribution of the upper extremity muscles engaged in the realization of motor or stabilizing functions in the electromyography (EMG) sphere.     

Proposal for an Indexical Method of Evaluating Risk of Hand Tool Operators’ Exposure to Mechanical Vibrations

The article presents proposals for an indexical evaluation of exposure of hand tool operators to vibrations. The presented indices have been developed on the basis of the results of laboratory tests. The examinations studied the effect of pressure force and grip force exerted by an operator on a hand tool as well as the amplitudes and frequencies of an exciting signal on vibrations transmitted in the hand-tool handle system.     

Structural equation model of the influence of noise annoyance on miners’ unsafe behavior in coal mines

Miners' unsafe behavior (UB) is the main cause of coal mine accidents. Previous research has suggested that excessive noise in tunnels impacts miners' temperaments and safe production behavior. To explore the influence of noise on UB, four different dimensions of noise annoyance were identified: cognitive, emotional, communication, and physical mechanism annoyance. The coal mine noise annoyance scale, miners' unsafe behavior intention (UBI) scale, and miners’ UB scale were developed according to different dimensions. In the first survey, a total of 200 questionnaires were distributed in the two coal mines, and 193 valid questionnaires were recovered. Exploratory factor analysis was conducted, and invalid items were removed according to the analysis results to form the final scale. Then, 500 final scales were distributed in two Chinese coal mines, and 482 valid questionnaires were collected. Confirmatory factor analysis was conducted by collating the data of the second questionnaire. Based upon the structural equation model (SEM), the SEM of the influence of noise annoyance degree on UB and the path analysis with latent variable path analysis with the latent variables (PA-LVs) mediating model of the effect of UBI on UB were established, and the path coefficients with fitting data of the model were analyzed. The results indicated that the four dimensions of coal mine noise annoyance had a strong positive impact on UB, which was reduced by less noise annoyance. In addition, the Bootstrap method was used to verify the mediating method among the four dimensions of noise annoyance, cognitive annoyance, emotional annoyance, with communication annoyance indirectly affecting UB through UBI. The research results provide theoretical support for reducing the UB of miners and improving coal mine safety levels.     

Algorithms for Increasing the Efficiency of Precision Production Operator’s Activities

To assess and plan future risk-analysis research projects, 275 documents describing methods and tools for assessing the risks associated with industrial machines or with other sectors such as the military, and the nuclear and aeronautics industries, etc., were collected. These documents were in the format of published books or papers, standards, technical guides and company procedures collected throughout industry. From the collected documents, 112 documents were selected for analysis; 108 methods applied or potentially applicable for assessing the risks associated with industrial machines were analyzed and classified. This paper presents the main quantitative results of the analysis of the methods and tools.     

Workers’ exposure to electric fields during the task ‘maintenance of an operating device of circuit breaker from a service platform’ at 110-kV substations

The objective of the study was to investigate occupational exposure to electric fields during the task ‘maintenance of an operating device of circuit breaker from a service platform’ at 110-kV substations. The aim was also to compare the results to Directive 2013/35/EU. At 16 substations, 255 electric field measurements were performed. The highest mean value of the electric fields was 9.6?kV?m^?1. At 63% of substations the maximum values were over 10.0?kV?m^?1, and at 31% of the substations the 75th percentiles were over 10.0?kV?m^?1, which is the low action level (AL) according to Directive 2013/35/EU. All measured values were below the high AL (20.0?kV?m^?1). In the future, it is important to take into account that the measurements were only taken at Finnish 110-kV substations; therefore, it is not possible to generalize these results to other countries and different types of substations.     

A Contribution to the Study of the Antidust Respirators’ Real Performance

In most industrial enterprises, hazardous factors are present in quantities exceeding permissible levels. Such a situation requires using antidust respiratory protection. It has been suggested, however, that filters for respirators are not assessed properly and that lab results might not be related to real filtering efficiency in industry. This article contains test results of some commercially available filtering half-masks, including the effect of loading with real dust, high humidity, high temperature, and a combination of loading with dust and high humidity on the half-masks’ performance. The results show that the effect of these factors is considerable and that a combination of loading with silica dust and exposing to high humidity can cause a complete loss of performance.     

Ergonomic Diagnosis of the Driver’s Workplace in an Electric Locomotive

This paper deals with research aimed at developing a method for ergonomic analysis of the driver’s workplace in an electric locomotive. It presents the structure of the diagnosis and its assumptions, and includes a re-evaluation of the questionnaire-expert method in ergonomic research. The article presents research data on weights and evaluations including their standard deviations for particular priority features. Ergonomic levels of the studied operator’s cabin in locomotives are compared.     

Learning to Drive: Learners’ Self-Reported Cognitive Failure Level Predicts Driving Instructor’s Observation Rating of Driving Performance

Objectives. Evidence increases that cognitive failure may be used to screen for drivers at risk. Until now, most studies have relied on driving learners. This exploratory pilot study examines self-report of cognitive failure in driving beginners and error during real driving as observed by driving instructors. Methods. Forty-two driving learners of 14 driving instructors filled out a work-related cognitive failure questionnaire. Driving instructors observed driving errors during the next driving lesson. In multiple linear regression analysis, driving errors were regressed on cognitive failure with the number of driving lessons as an estimator of driving experience controlled. Results. Higher cognitive failure predicted more driving errors(p < .01) when age, gender and driving experience were controlled in analysis. Conclusions. Cognitive failure was significantly associated with observed driving errors. Systematic research on cognitive failure in driving beginners is recommended.     

Analysis of effects of driver’s evasive action time on rear-end collision risk using a driving simulator

Introduction: Driver’s evasive action is closely associated with collision risk in a critical traffic event. To quantify collision risk, surrogate safety measures (SSMs) have been estimated using vehicle trajectories. However, vehicle trajectories cannot clearly capture presence and time of driver’s evasive action. Thus, this study determines the driver’s evasive action based on his/her use of accelerator and brake pedals, and analyzes the effects of the driver’s evasive action time (i.e., duration of evasive action) on rear-end collision risk. Method: Fifty drivers’ car-following behavior on a freeway was observed using a driving simulator. An SSM called “Deceleration Rate to Avoid Crash (DRAC)” and the evasive action time were determined for each driver using the data from the driving simulator. Each driver tested two traffic scenarios – Cars and Trucks scenarios where conflicting vehicles were cars and trucks, respectively. The factors related to DRAC were identified and their effects on DRAC were analyzed using the Generalized Linear Models and random effects models. Results: DRAC decreased with the evasive action time and DRAC was closely related to drivers’ gender and driving experience at the road sections where evasive action to avoid collision was required. DRAC was also significantly different between Cars and Trucks scenarios. The effect of the evasive action time on DRAC varied among different drivers, particularly in the Trucks scenario. Conclusions: Longer evasive action time can significantly reduce crash risk. Driver characteristics are more closely related to effective evasive action in complex driving conditions. Practical Applications: Based on the findings of this study, driver warning information can be developed to alert drivers to take specific evasive action that reduces collision risk in a critical traffic event. The information is likely to reduce the variability of the driver’s evasive action and the speed variations among different drivers.