The release of engineered nanomaterials to the environment

There is scientific agreement that engineered nanomaterial (ENM) production, use and disposal lead to environmental release of ENM. However, very little is known on emissions of ENM to the environment. Currently, techniques are lacking to quantitatively monitor ENM emissions to and concentrations in the environment, and hence data on emissions and environmental concentrations are scarce. One of the few available studies reports the detection of nano-TiO(2) in water leaching from exterior facades. Some experimental evidence is available on the release of nanosized materials from commercial textiles during washing. A handful of modeling studies have investigated ENM release to the environment. These studies modeled either the release of ENMs to the environment from ENM containing products during the consumer usage, or the release throughout the whole life cycle of ENM and ENM-containing products. Sewage sludge, wastewater, and waste incineration of products containing ENM were shown to be the major flows through which ENMs end up in the environment. However, reliable data are particularly lacking on release during ENM production and on the application amounts and empirical information on release coefficients for all life cycle stages and environmental compartments. Quantitative data linking occupational exposure measurements and ENM emission flows into the environment are almost completely missing. Besides knowing the amounts of ENM released into the environment, it is equally important to investigate in what form ENMs are released. First results show that much of the ENM released from products is present in matrix-bound form, but that also some fraction is released as single, dispersed nanoparticles.     

Natural attenuation of coal combustion waste in river sediments

The weathering of coal combustion products (CCPs) in a lotic environment was assessed following the Tennessee Valley Authority (Kingston, TN) fly ash release of 2008 into surrounding rivers. Sampled materials included stockpiled ash and sediment collected from 180 to 880 days following the release. Total recoverable concentrations of heavy metals and metalloids in sediment were measured, and percent ash was estimated visually or quantified by particle counts. Arsenic and selenium in sediment were positively correlated with percent ash. For samples collected 180 days after the release, total concentrations of trace elements downstream of the release were greater than reference levels but less than concentrations measured in stockpiled ash. Total concentrations of trace elements remained elevated in ash-laden sediment after almost 2.5 years. A sequential extraction procedure (SEP) was used to speciate selected fractions of arsenic, copper, lead, nickel, and selenium in decreasing order of bioavailability. Concentrations of trace elements in sequentially extracted fractions were one to two orders of magnitude lower than total recoverable trace elements. The bulk of sequentially extractable trace elements was associated with iron-manganese oxides, the least bioavailable fraction of those measured. By 780 days, trace element concentrations in the SEP fractions approached reference concentrations in the more bioavailable water soluble, ion exchangeable, and carbonate-bound fractions. For each trace element, the percentage composition of the bioavailable fractions relative to the total concentration was calculated. These SEP indices were summed and shown to significantly decrease over time. These results document the natural attenuation of leachable trace elements in CCPs in river sediment as a result of the loss of bioavailable trace elements over time.     

Metal Pollution in the Environment of Minas Gerais State – Brazil

Intense mining activities in Minas Gerais State – Brazil brings out tons of waste to the environment. Considerable concentrations of toxic elements penetrate the soil, ground waters and rivers. This endangers the environment quality not only in the surrounding areas but also in ichthyofauna and in more distant areas of cattle raising and agricultural activities. After seasonal floods, veterinary clinic studies have shown that most animals raised in this region are affected by symptomatologic nervous diseases, still not clearly diagnosed, which suggests intoxication. These pathologies are mostly noted after floods. Instrumental Neutron Activation Analysis was applied to determine Al, As, Au, Ba, Br, Ca, Cl, Co, Cr, Cs, Cu, Fe, Hg, K, La, Mg, Mn, Na, Nd, Rb, Sb, Sc, Sm, Th and Zn in environmental samples. The obtained results show that the water and sediment contaminated with heavy metals and toxic elements from the Das Velhas River upstream basin, the mining region, carry contamination to the ichthyofauna and farming region within a distance of approximately 400 km.     

Documentation of bioaerosol concentrations in an indoor composting facility in France

Bioaerosol concentrations were investigated in a totally indoor composting facility processing fermentable household and green wastes to assess their variability. Stationary samples were collected by filtration close to specific composting operations and then were analysed for cultivable mesophilic bacteria, thermophilic bacteria, mesophilic fungi, thermophilic fungi, endotoxins and total airborne bacteria (DAPI-staining). Indoor concentrations exceeded the background levels, between 500 and 5400 EU m(-3) for endotoxins, 10(4) and 10(6) CFU m(-3) for cultivable bacteria and generally below 10(5) CFU m(-3) for airborne cultivable fungi. No significant (p > 0.05) differences were observed between the indoor composting operations. Successive 30 minute bioaerosol samples were collected to investigate the variation of cultivable mesophilic microorganisms over the work shift. Concentrations of mesophilic bacteria and fungi varied up to 1 log unit depending on the time at which they were collected in the day. Total airborne particles, counted using an optical particle counter, were present at up to 10(8) particles m(-3) and several concentration peaks were noted. Values for total airborne bacteria were roughly 70-fold higher than cultivable bacteria. These results raise the question of the sampling strategy (duration of sampling; number of samples to be collected) used in similar studies. They provide new bioaerosol concentration data in a composting facility and suggest that the filtration sampling method might be a useful tool for exposure measurements in that occupational environment.     

山东省主要河流中抗生素污染组成及空间分布特征

采用固相萃取-液相色谱/串联质谱法研究了山东省境内四大流域主要河流中抗生素污染组成及空间分布特征,涉及我国用量最大的6类共20种抗生素。结果表明:20种抗生素均有检出,且大环内酯类、喹诺酮类和四环素类抗生素整体检出浓度较高。就流域而言,半岛诸河流域抗生素污染较小,平均总质量浓度61.4 ng/L;海河流域、小清河流域和淮河流域相对较为严重,平均总质量浓度分别为232、175、118 ng/L。抗生素空间分布呈现一定的规律,检出浓度较高的点位主要集中在人口密集区下游,抗生素污染与周边生活污水、养殖企业废水和城市污水处理厂排水密切相关,而且抗生素组成可从一定程度上反映出污染来源。     

Occurrence, distribution and bioaccumulation of antibiotics in the Haihe River in China

The occurrence, distribution and bioaccumulation of 22 antibiotics, including eight fluoroquinolones (FQs), nine sulfonamides (SAs) and five macrolides (MLs), in the Haihe River were investigated. Surface water, sediment and fish samples were analyzed by HPLC-MS/MS. Ofloxacin, sulfamethoxazole, sulfadiazine, erythromycin and roxithromycin were found in all surface water samples. SAs were the predominant antibiotics in surface water samples in the mainstream of Haihe River, with the maximum concentration of 201 ng L(-1) for sulfamethoxazole. Compared with Haihe River, higher concentrations of antibiotics were found in the surface water samples in the Dagu and Chentaizi Drainage Rivers. The antibiotics pollution in the mainstream of Haihe River may derive from its tributaries, whereas the wastewater from fish ponds was not the main source of FQs, SAs and MLs in the river water. In sediment samples, FQs were the most frequently detected antibiotics and their concentrations were much higher than SAs and MLs. The high concentrations and detection frequencies of FQs in sediments indicate that sediments are an important reservoir for FQs as they are strongly adsorbed onto sediments. Ciprofloxacin and erythromycin exhibited potential bioaccumulation in crucian carp, with mean bioaccumulation factors of 3262 L kg(-1) and 4492 L kg(-1), respectively.     

Occurrence of selected antibiotics in Jiulongjiang River in various seasons, South China

The concentrations of six sulfonamides (SAs) and three tetracyclines (TCs) were investigated in Jiulongjiang River during the low water season and the high water season. They were monitored in both surface water and sediment. Total concentrations of all these antibiotics varied from 31 to 25,771 ng g(-1) in sediment samples. In water they ranged from 60 to 2607 ng L(-1) during the low water season and from ND (not detected) to 134 ng L(-1) during the high water season. At the sites nearby breeding farms, chlorotetracycline was found to have the highest concentration of 1036 ng L(-1) in water and 14,666 ng g(-1) in sediments. According to the published data, the concentrations of sulfamethazine, sulfameter and TCs at these sites were higher than that in most rivers. The concentrations during the low water season were tens to hundreds of times higher than that in the high water season. The lower concentrations of TCs in the high water season might result from both dilution and photo-degradation, while dilution and bio-degradation might lead to the lower concentrations of SAs. However, further study is needed to clarify the specific reasons. Concerning the relationship between sediment and water samples, the pseudo-partitioning values of TCs were much higher than SAs. It indicates that the TCs are prone to accumulate in the sediment.     

Quantification and source identification of polycyclic aromatic hydrocarbons in sediment, soil, and water spinach from Hanoi, Vietnam

Polycyclic aromatic hydrocarbons (PAHs) were quantified in sediment, soil, and plant material from Hanoi, Vietnam, and an aquatic production system in peri-urban Hanoi. The sum of the concentration of 16 US-EPA priority PAHs ( summation PAH16) ranged between 0.44 and 6.21 mg kg(-1) dw in sediment and between 0.26 and 1.35 mg kg(-1) dw in soil, with decreasing concentrations from the urban area to the peri-urban area, indicating contributions from urban and industrial sources. Double plots of diagnostic source ratios indicate that PAHs originate from mixed petrogenic and pyrogenic sources, the latter being predominant. The predominance of low molecular weight (LMW) PAHs in the sediment samples suggests that petrogenic sources are more prevalent in the water environment than in the soil. In contrast, high molecular weight (HMW) PAHs dominated in water spinach which probably reflects the plant's uptake of particle-bound PAHs that originate from pyrogenic sources.     

The impact of vehicular fallout on the Pra estuary of Ghana (a case study of the impact of platinum group metals (PGMs) on the marine ecosystem)

It is increasingly being recognised and environmental measurements have demonstrated that Platinum (Pt) (and potentially Rhodium (Rh) and Palladium (Pd)) is released with the ageing of catalytic converters. Platinum is a particular concern as it has a known mutagenic and toxic effect, even at exceedingly low concentrations, in urban air (affecting human health) and urban water (affecting ecosystem health). In the context given above and given the still keen lack of reliable experimental data on the levels of Pd, Pt and Rh in water and sediment, this study determined the concentration of such elements in water and sediment of the Pra estuary in the Western Region of Ghana where it is estimated that more than two thousand cars pass over the bridge under which the river flows to join the sea each day. Elevated concentrations of platinum (Pt), palladium (Pd) and Rhodium (Rh) were found to be associated with water and soils from areas of high traffic densities (Beposo) suggesting that vehicles also contribute heavy metals (PGMs) to the environment. The result showed elevated levels of these metals in river bank, waterbed and in the water. There is therefore the tendency of possible accumulation of these metals in plant and animals along these areas.     

轻稳定同位素环境检测样品的采集和前处理方法

稳定同位素技术已被广泛应用于环境领域的鉴定、溯源、CN循环、反应机理等研究,检测样品的采集和前处理方法会直接影响研究结论。综述了目前在环境样品自然丰度的轻稳定同位素研究中,已被认可的样品采集和前处理方法的应用与进展,包括气体及其颗粒物样品、植物样品、沉积物样品、土壤样品、水样、生物样品和地质样品,为进一步提高数据的准确性、可靠性和多样性提供技术支持。     

Heavy Metal Levels in Marine Sediments of Singapore

Marine environmental levels of the metals copper (Cu), zinc (Zn), lead (Pb) and cadmium (Cd) were measured from sediments collected around 20 coastal locations around Singapore, over a 2-year period. Sediment-size analysis was conducted on sediment samples, and Atomic Absorption Spectrophotometry was used in the analyses of sediment heavy metal concentrations. The levels of heavy metals in marine sediment was largely dependant on sediment particle size, as illustrated by the correlation of sediment size with Multidimensional Scaling (MDS) configurations of sediment metal concentrations. In addition, the proximity to shipping activity, and the release of anti-fouling paint from boats also influence heavy metal concentrations in marine sediments of Singapore.     

湖库污染底泥环保疏浚工程环评要点探讨

以滇池草海污染底泥疏挖及处置工程为例,分析了湖库底泥疏挖项目环境影响评价因素识别与评价重点,探讨了施工期对水域水质及周围景观影响、施工期恶臭、噪声等的环境影响评价要点,底泥堆放对地下水与土壤环境影响、堆放恶臭对环境影响的评价要点,及疏挖工程的环境效益与运营期对周围生态环境影响分析的要点。针对该类工程在疏挖、余水处理和污染底泥堆存过程中的二次污染问题,提出了切实可行的二次污染防治对策。     

Occurrence and behaviour of organophosphorus insecticides in the River Wuchuan,southeast China

Organophosphorus (OP) insecticides are used worldwide, yet their persistence in the environment is not well understood. This paper summarises recent research on 17 OP insecticides in the River Wuchuan, an important catchment in China, by determining their concentrations in water, soil, sediment and plants by gas chromatography with flame photometric detection (GC-FPD). The concentrations of the total OP insecticides ranged from 92.77 to 229 ng l-1 in river water, 1.61 to 9.93 ng g-1 dry weight in soil, 1.24 to 7.56 ng g-1 dry weight in sediment and 75.28 to 326 ng g-1 dry weight in plants. There was a relatively high abundance of methamidophos, dichlorvos, malathion, omethoate and dimethoate in all water, soil, sediment and plant samples. On average, these five compounds collectively accounted for 64%, 71%, 71% and 54% of the total OP insecticide concentration in water, soil, sediment and plants, respectively, which was similar to the composition of OP insecticides in application formulations used in our study area and in China as a whole. The results therefore reflect the application pattern to some extent, and suggest that the sources of the OP insecticides are mainly from current usage. When compared with other areas, the levels of OP insecticides in the River Wuchuan were moderate. The animal and human risks from exposure to OP insecticides in water and plants were evaluated against relevant threshold values. The results therefore provide important information on the current contamination status of a key agricultural watershed in China, and point to the need for urgent action to control the use of some excessively applied and potentially persistent agrochemicals, such as methamidophos, omethoate and dimethoate.     

Pollution and potential mobility of Cd, Ni and Pb in the sediments of a wastewater-receiving river in Hanoi, Vietnam

Large quantities of untreated industrial and domestic wastewater are discharged from the city of Hanoi into urban rivers. Sediment samples from three sites in the To Lich River in Hanoi were assessed with respect to the concentrations and potential mobility of cadmium (Cd), nickel (Ni) and lead (Pb). Due to very high Cd concentrations up to 700 mg kg^?1 at one site, the sediment was considered highly unsuitable for any types of land use if dredged and disposed of on land. Chemical sequential extractions of wet and anoxic sediment samples showed that Cd and Pb were largely associated with the redox-sensitive fractions and could thus be mobilised following measures such as resuspension or dredging. To assess the potential mobilisation of heavy metals from the anoxic sediment due to oxidation, the samples were exposed to different oxidants (i.e. atmospheric air and hydrogen peroxide) and afterwards submitted to a leaching test. These experiments showed that although oxidation may increase the equilibrium pore water concentrations of heavy metals in the sediments, other sediment mineral fractions seem to effectively immobilise heavy metals potentially released from the oxidisable fraction.     

Identification of soil contamination hotspots with veterinary antibiotics using heavy metal concentrations and leaching data—a field study in China

In regions with high livestock densities, the usage of antibiotics and metals for veterinary purposes or as growth promoters poses a risk in manured soils. We investigated to which degree the concentrations and depth distributions of Cu, Zn, Cr and As could be used as a tracer to discover contaminations with sulfonamides, tetracyclines and fluoroquinolones. Besides, we estimated the potential vertical translocation of antibiotics and compared the results to measured data. In the peri-urban region of Beijing, China, soil was sampled from agricultural fields and a dry riverbed contaminated by organic waste disposal. The antibiotic concentrations reached 110 μg kg^?1 sulfamethazine, 111 μg kg^?1 chlortetracycline and 62 μg kg^?1 enrofloxacin in the topsoil of agricultural fields. Intriguingly, total concentrations of Cu, Zn, Cr and As were smaller than 65, 130, 36 and 10 mg kg^?1 in surface soil, respectively, therewith fulfilling Chinese quality standards. Correlations between sulfamethazine concentrations and Cu or Zn suggest that in regions with high manure applications, one might use the frequently existing monitoring data for metals to identify potential pollution hotspots for antibiotics in topsoils. In the subsoils, we found sulfamethazine down to ≥2 m depth on agricultural sites and down to ≥4 m depth in the riverbed. As no translocation of metals was observed, subsoil antibiotic contamination could not be predicted from metal data. Nevertheless, sulfonamide stocks in the subsoil could be estimated with an accuracy of 35–200 % from fertilisation data and potential leaching rates. While this may not be sufficient for precise prediction of antibiotic exposure, it may very well be useful for the pre-identification of risk hotspots for subsequent in-depth assessment studies.     

Evaluation of chromium contamination in water, sediment and vegetation caused by the tannery of Jijel (Algeria): a case study

In order to evaluate the chromium (Cr) contamination due to the discharge of waste waters from the tannery of Jijel in the Mouttas river (Algeria), samples of water, sediment and vegetation (Agropyrum repens) were collected during a 6 month period in four stations located upstream (control) and downstream of the tannery. The total chromium was measured by atomic absorption spectrophotometry. Metal inputs were clearly related to effluent discharges from the tannery into the river. Although only traces of chromium were found in water samples upstream of the tannery, very high concentrations (up to 860 times higher) were detected downstream. The contamination was not limited to water of Mouttas River because a same difference in chromium concentrations was also found in sediments and plants Agropyrum repens that were sampled upstream and downstream of the tannery. This work showed that the treatment process used in the wastewater treatment plant of the tannery of Jijel is not able to remove the chromium detected in their influents. The occurrence and chromium levels detected in the aquatic environment represent a major problem concerning drinking water resources and environmental protection of water bodies.     

spatial analysis of herbicide decay rates in louisiana

This analysis presents results based on a five-yearstudy recently supported by the Louisiana Departmentof Transportation and Development (DOTD) in which theacute toxicity, fate and effect of herbicide mixtureson human health and the environment were assessed. Three sites were routinely sprayed by DOTD to killweeds along the roadsides. Two herbicide mixtures wereused, 2,4-D and Roundup, and Garlon 3A and Roundup.Water, vegetation, soil and sediment samples werecollected quarterly for three years and were analyzedfor pesticide content to study the fate and impact ofherbicides in the environment. Results indicate acorrelation between soil type, herbicide type, andpersistence of the herbicide in the environment. Usingthe correlations found in these data, spatial analysisidentified areas where herbicide use may potentiallycause surface water and sediment contamination, basedon soil composition/properties, type of herbicideapplied, and proximity of water bodies to sprayed areas.     

Estimation of 210Po and 210Pb and its dose to human beings due to consumption of marine species of Ennore Creek, South India

A systemic study on the natural radionuclides such as (210)Po and (210)Pb in the environmental matrices and biota of Ennore Creek has been undertaken to establish a baseline data on the radiation profile of Ennore Creek environment. The environmental samples such as water, sediment, and biota (seaweeds, molluscs, crustaceans, and fishes) have been subjected to analyses. It has been observed that the concentration of (210)Po and (210)Pb in the water samples of Ennore Creek as 2.7 and 1.63 m Bq L(-1), respectively. The activity concentration of (210)Po and (210)Pb in the sediment sample was 17.9 and 28.9 Bq kg(-1), respectively. The bivalve mollusk Perna viridis have been identified to accumulate higher concentrations of (210)Po and (210)Pb suggesting that they could serve as bioindicator of radionuclides in the Ennore Creek environment. The committed effective dose for human beings was found at 81.13-216.8 and 2.1-297.2 μSv year(-1) for (210)Po and (210)Pb, respectively.     

Geochemical characterisation of pyrite oxidation and environmental problems related to release and transport of metals from a coal washing low-grade waste dump, Shahrood, northeast Iran

Pyrite oxidation and release of the oxidation products from a low-grade coal waste dump to stream, groundwater and soil was investigated by geochemical and hydrogeochemical techniques at Alborz Sharghi coal washing plant, Shahrood, northeast Iran. Hydrogeochemical analysis of water samples indicates that the metal concentrations in the stream waters were low. Moreover, the pH of the water showed no considerable change. The analysis of the stream water samples shows that except the physical changes, pyrite oxidation process within the coal washing waste dump has not affected the quality of the stream water. Water type was determined to be calcium sulphate. The results of the analysis of groundwater samples indicate that the pH varies from 7.41 to 7.51. The concentrations of the toxic metals were low. The concentration of SO4 is slightly above than its standard concentration in potable water. It seems that the groundwater less affected by the coal washing operation in the study area. Geochemical analysis of the sediment samples shows that Fe concentration decreases gradually downstream the waste dump with pH rising. SO(4) decreases rapidly downstream direction. Copper, Zn and Co concentrations decrease with distance from the waste dump due to a dilution effect by the mixing of uncontaminated sediments. These elements, in particular, Zn are considerably elevated in sediment sample collected at the nearest distance to the waste dump. There is no doubt that such investigations can help to develop an appropriate water remediation plan.     

Using public participation to sample trace metals in lake surface sediments: the OPAL Metals Survey

Members of the public in England were invited in 2010 to take part in a national metals survey, by collecting samples of littoral sediment from a standing water body for geochemical analysis. To our knowledge, this is the first national sediment metals survey using public participation and reveals a snapshot of the extent of metals contamination in ponds and lakes across England. Hg, Ni, Cu, Zn and Pb concentrations exceeding sediment quality guidelines for the health of aquatic biota are ubiquitous in ponds and lakes, not just in areas with a legacy of industrial activity. To validate the public sampling approach, a calibration exercise was conducted at ten water bodies selected to represent a range of lakes found across England. Sediment concentrations of Hg, Ni, Cu, Zn and Pb were measured in samples of soil, stream and littoral and deep water sediment to assess inputs. Significant differences between littoral sediment metal concentrations occur due to local variability, but also organic content, especially in upland, peat soil catchments. Variability of metal concentrations between littoral samples is shown to be low in small (<20 ha) lowland lakes. Larger and upland lakes with more complex inputs and variation in organic content of littoral samples have a greater variability. Collection of littoral sediments in small lakes and ponds, with or without voluntary participation, can provide a reliable sampling technique for the preliminary assessment of metal contamination in standing waters. However, the heterogeneity of geology, soils and history/extent of metal contamination in the English landscape, combined with the random nature of sample collection, shows that systematic sampling for evaluating the full extent of metal contamination in lakes is still required.