Field evaluation of an innovative stormwater treatment device—the StormvaultTM system

This paper reports the results obtained for the determination of Ba concentrations in mineral groundwater samples collected from drilled outlets located in the counties of Covasna and Harghita (34 sampling points), in five expeditions (spring, summer, and autumn), during 3 years: 2005, 2006, and 2007. The experimental data show that there are some sampling sites in which the barium concentration exceeds 1 mg/L, which is the maximum concentration admitted for barium. These mineral natural waters could be used only for therapeutic purposes. All other analyzed natural mineral waters are proper as both drinking and therapeutic water. By means of a principal component analysis a statistical approach was performed, using the data obtained during those analyzing processes. The distribution of the water saturation indexes with respect to a series of mineral species (alstonite, barite, barytocalcite, nitrobarite, sanbornite, and witherite) suggests that barium tends to remain in solution as ionic species in different concentrations and to be further carried away as such.     

Statistical analysis of arsenic contamination in drinking water in a city of Iran and its modeling using GIS

In this research, probable arsenic contamination in drinking water in the city of Ardabil was studied in 163 samples during four seasons. In each season, sampling was carried out randomly in the study area. Results were analyzed statistically applying SPSS 19 software, and the data was also modeled by Arc GIS 10.1 software. The maximum permissible arsenic concentration in drinking water defined by the World Health Organization and Iranian national standard is 10 μg/L. Statistical analysis showed 75, 88, 47, and 69% of samples in autumn, winter, spring, and summer, respectively, had concentrations higher than the national standard. The mean concentrations of arsenic in autumn, winter, spring, and summer were 19.89, 15.9, 10.87, and 14.6 μg/L, respectively, and the overall average in all samples through the year was 15.32 μg/L. Although GIS outputs indicated that the concentration distribution profiles changed in four consecutive seasons, variance analysis of the results showed that statistically there is no significant difference in arsenic levels in four seasons.     

Arsenic and Other Metal Contamination of Groundwaters in the Industrial Area of Thessaloniki, Northern Greece

In groundwater, used for drinking water supply in the greater industrial area of Thessaloniki, in Northern Greece, concentrations of total arsenic exceeded the WHO provisional guideline value and the EU maximum contaminant level (MCL) of 10 μg/L. The concentration of total arsenic was in the range between 4–130 μg/L, whereas the median value was 36 μg/L and the average concentration 46 μg/L. Nine out of the eleven wells contained total arsenic at concentration higher than 10 μg/L and it should be stressed that 6 of them contain arsenic at concentrations between 10 (new MCL) and 50 μg/L (previous MCL). The examined groundwaters were found to contain elevated concentrations of manganese and phosphate. Arsenic had a positive correlation with the pH, indicating the possible effect of pH on arsenic mobilisation. These findings emerge the problem of contamination from arsenic, since, according to the EU directive 98/83, all drinking water sources within the European Union should have achieved compliance with the new limits by 12/2003, implying that the situation requires urgent remedial action.     

Bisphenol A occurred in Kao-Pin River and its tributaries in Taiwan

Bisphenol A (BPA), one of the endocrine-disrupting chemicals, was detected in water collected from Kao-Pin River and its tributaries. Results indicated that 59% of the water samples contained BPA. Concentrations ranged from less than the limit of detection (LOD, 0.037) to 4.23 μg/L. The mean concentrations were 0.16, 0.20, 1.02, 1.30, and 0.30 μg/L for sampling sites S1, S2, S3, S4, and S5, respectively. Concentrations were not significantly different between high and low-flow periods in sites S2, S3, and S4. In site S1, concentrations in the high-flow period were significantly greater than during the lower flow period, and in site S5, BPA concentration in the low-flow period was significantly greater than in the high-flow period. The BPA mass flow rate in site S5 was greater in the high-flow period than in the low-flow period.     

Pollution by oestrogenic endocrine disruptors and β-sitosterol in a south-western European river (Mira,Portugal)

The Mira River is a Portuguese water body widely known for its wilderness and is advertised as one of the less polluted European rivers. On this presumption, the levels of endocrine-disrupting compounds (EDCs) in Mira waters were never measured. However, because environmentalists have claimed that the Mira could be moderately polluted, a range of 17 EDCs were measured not only at the estuary but also along the river. The targeted EDCs included natural and pharmaceutical oestrogens (17β-oestradiol, oestrone and 17α-ethynylestradiol), industrial/household pollutants (octylphenols, nonylphenols and their monoethoxylates and diethoxylates and bisphenol A), phytoestrogens (formononetin, biochanin A, daidzein, genistein) and the phytosterol sitosterol (SITO). For this propose, waters from six sampling sites were taken every 2 months, over a 1-year period (2011), and analysed by gas chromatography–mass spectrometry. Unexpectedly high levels of oestrogens and of industrial/household pollutants were measured at all sampling sites, including those located inside natural protected areas. Indeed, the annual average sum of EDCs was ≈57 ng/L for oestrogens and ≈1.3 μg/L for industrial/household chemicals. In contrast, the global average levels of phytoestrogens (≈140 ng/L) and of SITO (≈295 ng/L) were lower than those reported worldwide. The EDC concentrations were normalised for ethynylestradiol equivalents (EE_2eq). In view of these, the oestrogenic load of the Mira River attained ≈47 ng/L EE_2eq. In addition, phosphates were above legal limits at both spring and summer (>1 mg/L). Overall, data show EDCs at toxicant relevant levels in the Mira and stress the need to monitor rivers that are allegedly less polluted.     

Gravimetric and Chemical Features of Airborne PM10 AND PM2.5 in Mainland Portugal

This paper describes concentration amounts of arsenic (As), particulate mercury (Hg), nickel (Ni) and lead (Pb) in PM₁₀ and PM_2.5, collected since 1993 by the Technological and Nuclear Institute (ITN) at different locations in mainland Portugal, featuring urban, industrial and rural environments, and a control as well. Most results were obtained in the vicinity of coal- and oil-fired power plants. Airborne mass concentrations were determined by gravimetry. As and Hg concentrations were obtained through instrumental neutron activation analysis (INAA), and Ni and Pb concentrations through proton-induced X-ray emission (PIXE). Comparison with the EU (European Union) and the US EPA (United States Environmental Protection Agency) directives for Ambient Air has been carried out, even though the sampling protocols herein – set within the framework of ITN's R&D projects and/or monitoring contracts – were not consistent with the former regulations. Taking this into account, 1) the EU daily limit for PM₁₀ was exceeded a few times in all sites except the control, even if the number of times was still inferior to the allowed one; 2) the EU annual mean for PM₁₀ was exceeded at one site; 3) the EPA daily limit for PM_2.5 was exceeded one time at three sites; 4) the EPA annual mean for PM_2.5 was exceeded at most sites; 5) the inner-Lisboa site approached or exceeded the legislated PMs; 6) Pb levels stayed far below the EU limit value; and 7) concentrations of As, Ni and Hg were also far less than the reference values adopted by EU. In every location, Ni appeared more concentrated in PM_2.5 than in coarser particles, and its levels were not that different from site to site, excluding the control. The highest As and Hg concentrations were found in the neighbourhood of the coal-fired, utility power plants. The results may be viewed as a “worst-case scenario” of atmospheric pollution, since they have been obtained in busy urban-industrial areas and/or near major power-generation and waste-incineration facilities.     

丹江口水库流域氮素时空分布特征

为全面了解丹江口水库流域氮素污染状况,对库区26个点位及10条主要入库河流入库口处的表层水样进行了丰水期、平水期、枯水期采样与监测,探讨了氮素时空分布特征。入库口总氮检出范围为1.31~10.96 mg/L,其中泗河和神定河入库口总氮最高。总氮为库区水质主要限制因子,年均总氮质量浓度为1.13~2.71 mg/L;汉江库区整体上总氮污染水平略高于丹江库区,且与丹江库区相比,汉江库区受点源排放的影响较大。10条入库河流总氮的总年均输入量为63 347.31 t/a,其中汉江的总氮输入量最大;入库河流总氮控制的关键在于溶解性有机氮和硝酸盐氮的控制。     

Arsenic and antimony distribution in the Ría de Arousa: before and after the Prestige oil tanker sinking

The behaviour of arsenic and antimony in the Ría de Arousa (Galicia, north west of Spain) and the influence of the Prestige accident in the estuary is evaluated. As and Sb were simultaneously determined by HG-ICPOES in seawater samples after a preconcentration with La in a knotted reactor. The highest As concentration is in the inner and middle parts of the ría where the current is weaker and next to the main ports of the area. The largest Sb concentrations were found in the bay of the ría. Linear variation of concentration vs. salinity for As and As/Sb ratios indicated that there was no pollution in the waters of Arousa. The Prestige oil spillage had no serious influence and the values of arsenic (most of them <1.5 microg L(-1)) are similar to the average oceanic concentration, whereas concentrations for antimony (most of them <0.15 microg L(-1)) are less than the oceanic ones.     

水中砷快速检测方法研究

采用实验室与现场相结合的方法对砷快速测定方法的可靠性和应用价值进行研究。研究显示,该法检出限为2μg/L,具有较好的准确度,对于砷质量浓度5μg/L的水样,相对误差为1.00%~10.00%,对于砷质量浓度为5μg/L的水样,虽然相对误差较大,为22.40%,但其测定结果在砷污染快速监测可接受的结果范围内;精密度较高,相对标准差为5.27%~16.54%;同时具有较好的再现性。该方法能减少砷污染筛查的工作量,可满足应对砷污染突发事件应急监测的需求。     

Seasonal variation, risk assessment and source estimation of PM 10 and PM10-bound PAHs in the ambient air of Chiang Mai and Lamphun, Thailand

Daily PM10 concentrations were measured at four sampling stations located in Chiang Mai and Lamphun provinces, Thailand. The sampling scheme was conducted during June 2005 to June 2006; every 3 days for 24 h in each sampling period. The result revealed that all stations shared the same pattern, in which the PM10 (particulate matters with diameter of less than 10 microm) concentration increased at the beginning of dry season (December) and reached its peak in March before decreasing by the end of April. The maximum PM10 concentration for each sampling station was in the range of 140-182 microg/m(3) which was 1.1-1.5 times higher than the Thai ambient air quality standard of 120 microg/m(3). This distinctly high concentration of PM10 in the dry season (Dec. 05-Mar. 06) was recognized as a unique seasonal pattern for the northern part of Thailand. PM10 concentration had a medium level of negative correlation (r = -0.696 to -0.635) with the visibility data. Comparing the maximum PM10 concentration detected at each sampling station to the permitted PM10 level of the national air quality standard, the warning visibility values for the PM10 pollution-watch system were determined as 10 km for Chiang Mai Province and 5 km for Lamphun Province. From the analysis of PM10 constituents, no component exceeded the national air quality standard. The total concentrations of PM10-bond polycyclic aromatic hydrocarbons (PAHs) are calculated in terms of total toxicity equivalent concentrations (TTECs) using the toxicity equivalent factors (TEFs) method. TTECs in Chiang Mai and Lamphun ambient air was found at a level comparable to those observed in Nagasaki, Bangkok and Rome and at a lower level than those reported at Copenhagen. The annual number of lung cancer cases for Chiang Mai and Lamphun Provinces was estimated at two cases/year which was lower than the number of cases in Bangkok (27 cases/year). The principal component analysis/absolute principal component scores (PCA/APCS) model and multiple regression analysis were applied to the PM10 and its constituents data. The results pointed to the vegetative burning as the largest PM10 contributor in Chiang Mai and Lamphun ambient air. Vegetative burning, natural gas burning & coke ovens, and secondary particle accounted for 46-82%, 12-49%, and 3-19% of the PM10 concentrations, respectively. However, natural gas burning & coke ovens as well as vehicle exhaust also deserved careful attention due to their large contributions to PAHs concentration. In the wet season and transition periods, 42-60% of the total PAHs concentrations originated from vehicle exhaust while 16-37% and 14-38% of them were apportioned to natural gas burning & coke ovens and vegetative burning, respectively. In the dry period, natural gas burning & coke ovens, vehicle exhaust, and vegetative burning accounted for 47-59%, 20-25%, and 19-28% of total PAHs concentrations. The close agreement between the measured and predicted concentrations data (R(2) > 0.8) assured enough capability of PCA/APCS receptor model to be used for the PM10 and PAHs source apportionment.     

Arsenic speciation in human hair: a new perspective for epidemiological assessment in chronic arsenicism

The analysis for arsenic in hair is commonly used in epidemiological studies to assess exposure to this toxic element. However, poor correlation between total arsenic concentration in hair and water sources have been found in previous studies. Exclusive determination of endogenous arsenic in the hair, excluding external contamination has become an analytical challenge. Arsenic speciation in hair appears as a new possibility for analytical assessing in As-exposure studies. This study applied a relative simple method for arsenic speciation in human hair based on water extraction and HPLC-HG-ICP-MS. The concentration of arsenic species in human hair was assessed in chronically As(V)-exposed populations from two villages (Esqui?a and Illapata) of the Atacama Desert, Chile. The arsenic concentrations in drinking water are 0.075 and 1.25 mg L(-1), respectively, where As(V) represented between 92 and 99.5% of the total arsenic of the consumed waters. On average, the total arsenic concentrations in hair from individuals of Esqui?a and Illapata were 0.7 and 6.1 microg g(-1), respectively. Four arsenic species, As(III), DMA(V), MMA(V) and As(V), were detected and quantified in the hair extracts. Assuming the found species in extracts represent the species in hair, more than 98% of the total arsenic in hair corresponded to inorganic As. On average, As(III) concentrations in hair were 0.25 and 3.75 microg g(-1) in Esqui?a and Illapata, respectively; while, the As(V) average concentrations were 0.15 and 0.45 microg g(-1) in Esqui?a and Illapata, respectively. Methylated species represent less than 2% of the extracted As (DMA(V)+ MMA(V)) in both populations. As(III) in hair shows the best correlation with chronic exposure to As(V) in comparison to other species and total arsenic. In fact, concentrations of As(total), As(III) and As(V) in hair samples are correlated with the age of the exposed individuals from Illapata (R= 0.65, 0.69, 0.57, respectively) and with the time of residence in this village (R= 0.54, 0.71 and 0.58, respectively).     

Field uptake rates of hydrophobic organic contaminants by semipermeable membrane devices: environmental monitoring considerations

The uptake rates of selected hydrophobic organic contaminants (HOCs) by semipermeable membrane devices (SPMDs)--a polyethylene layflat containing the lipid triolein--were investigated under natural conditions. SPMDs were exposed in three sampling sites (industrial, urban, and agricultural areas) in the Tajo River (Toledo, Spain) for 5, 11 and 20 d. The organochlorine compounds 4,4'-DDT, 4,4'-DDE, alpha-HCH, gamma-HCH, pentachlorobenzene, hexachlorobenzene, and polychlorinated biphenyls (PCBs), and the 16 priority pollutant polycyclic aromatic hydrocarbons (PAHs) were detected in the SPMDs deployed in the three sampling sites. A linear uptake rate was found for DDTs and for 4-Cl- and 5-Cl-substituted PCB congeners in all sampling sites. Concentrations of HCHs (80.3 ng g(-1) SPMD for alpha-HCH and 109 ng g(-1) SPMD for gamma-HCH after 20 d of exposure) increased according to a linear uptake rate in the SPMDs deployed in the sampling site located in the agricultural area. Likewise, a marked increase of total PAH concentration (up to 300 ng g(-1) SPMD after 20 d of exposure) was solely found in the sampling site situated near a thermoelectric power station. Examination of individual PAHs revealed that PAHs with log K(OW) between 4.2 and 5.7 displayed a linear uptake rate over the 20 d of exposure. Water concentrations (ng L(-1)) of HCB (0.80-2.48), lindane (1.30-11.5), 4,4'-DDT (0.61-2.02), 4,4'-DDE (6.89-11.6) and total PAHs (12.0-26.7) estimated by a linear uptake kinetic model were found to be high in comparison with other polluted aquatic systems, and similar to concentrations in other Spanish rivers. Our results suggest that SPMD kinetic uptake studies in the natural environment are recommended for identifying point-pollution sources, and that shorter times of SPMD exposure (approximately 1 week) are desirable to minimize one of the main problems of field SPMD deployment, i.e., the biofouling, which negatively affects the estimation of the dissolved HOC concentrations.     

Application of natural zeolites for preconcentration of arsenic species in water samples

Zeolites of the clinoptilolite type produced in Mexico and Hungary were investigated with respect to their sorption efficiency for various redox species of arsenic. Long-term experiments showed that arsenate remains stable for a long period in spiked deionised water and drinking water, as well as in the surface water of the Biela valley in Saxony, Germany. Both clinoptilolites are able to decrease the initial arsenic concentration of 200 microg l(-1) by more than 75% in deionised, drinking, ground and surface waters. In the case of the Mexican zeolite, both the arsenite and the arsenate concentrations (200 microg l(-1)) can be lowered from 200 microg l(-1) to 10 microg l(-1), which is the World Health Organisation's (WHO's) recommended maximum level. It was found that the presence of cations and anions in the natural waters of Biela, Germany, and Zimapán, Mexico, did not reduce the efficiency of the selected zeolites. The Hungarian zeolite removed 75% of the arsenate in the Zimapán water and only 50% when the sample was first acidified. This zeolite totally desorbed the fixed arsenic into a water volume that was half the volume in the adsorption experiment.     

Arsenic and trace metals in river water and sediments from the southeast portion of the Iron Quadrangle, Brazil

The Iron Quadrangle has been one of the most important gold production regions in Brazil since the end of the seventeenth century. There, arsenic occurs in close association with sulfide-rich auriferous rocks. The most abundant sulfide minerals are pyrite and arsenopyrite, yet trace metal sulfides occur in subordinate phases as well. Historical mining activities have been responsible for the release of As and trace metals to both aquatic and terrestrial environments close to mining sites in the region. Therefore, this study was aimed to evaluate the distribution and mobility of As, Cd, Co, Cr, Cu, Ni, Pb, and Zn in streams in the southeast portion of the Iron Quadrangle between the municipalities of Ouro Preto and Mariana, the oldest Brazilian Au mining province. Total concentrations of some trace metals and arsenic in water were determined. The four-stage sequential extraction procedure proposed by the commission of the European Communities Bureau of Reference (BCR) was used to investigate the distribution of these elements in stream sediments. Arsenic concentration in water was >10 ??g L^???1 (maximum limit permitted by Brazilian environmental regulations for water destined for human consumption) at all sampling sites, varying between 36.7 and 68.3 ??g L^???1. Sequential extraction in sediments showed high concentrations of As and trace metals associated with easily mobilized fractions.     

DNPH衍生化采样-溶剂解析-高效液相色谱法同时测定木制品中25种醛酮化合物

建立了DNPH衍生化采样-溶剂解析-高效液相色谱测定木制品中醛酮化合物的方法。采样时需在2,4-二硝基苯肼吸附管前串联一只SEP-PAK脱臭氧小柱;采样体积应≤10 L,流量≤400 m L/min。该法对25种醛(酮)化合物对应的衍生物分离效果良好,在0.005~3 mg/L范围内线性良好,相关系数R2≥0.999 6,回收率为85.3%~113.5%,精密度为2.67%~4.56%。采样量为10 L时,25种醛(酮)化合物的检出限和定量限分别≤0.16和0.50μg/m3。     

Estrogenic activity profiles and risks in surface waters and sediments of the Pearl River system in South China assessed by chemical analysis and in vitro bioassay

Estrogenic activity risks in the Pearl River system (Liuxi River, Zhujiang River and Shijing River) in South China were assessed by combined chemical analysis and recombinant yeast estrogen screen (YES) bioassay for surface waters and sediments collected in both dry and wet seasons. The xenoestrogens 4-tert-octylphenol, 4-nonylphenol and bisphenol A were detected at almost every sampling site at concentrations of several ng L(-1) (ng g(-1)) to tens of μg L(-1) (μg g(-1)) in surface waters (and sediments). The estrogens estrone and 17β-estradiol were also detected in most of the samples with concentrations from several ng L(-1) (ng g(-1)) to tens of ng L(-1) (ng g(-1)) in surface waters (and sediments). However, synthetic estrogens diethylstilbestrol and 17α-ethinylestradiol were only detected at a few sites. The 17β-estradiol equivalents (EEQ) screened by the YES bioassay were in the range of 0.23-324 ng L(-1) in surface waters and from not detected to 101 ng g(-1) in sediments. Shijing River displayed one to two orders of magnitude higher levels for both measured chemical concentrations and estrogenic activities than the Zhujiang River and the Liuxi River. A risk assessment for the surface waters showed high risks for the downstream reaches of the Liuxi River and the upstream to midstream reaches of the Zhujiang River and the Shijing River. Higher estrogenic risks were observed in the wet season than in the dry season for surface waters, probably due to the input of runoff and direct overflow of small urban streams during heavy rain events. Only small variations in estrogenic risk were found for the sediments between the two seasons, suggesting that sediments are a sink for these estrogenic compounds in the rivers.     

Measurements of dissolved methylmercury in natural waters using diffusive gradients in thin film (DGT)

A diffusive gradient in thin films (DGT) technique for measuring methylmercury (MeHg) concentrations in natural waters was developed using 3-mercaptopropyl-functionalized silica gel to preconcentrate the methylmercury. The new resin was characterized and calibrated. Methylmercury is efficiently accumulated at a pH range of 3-9. Basic performance tests of the new DGT device confirmed the applicability of Fick's first law for such DGT measurements. The diffusion coefficient of methylmercury in polyacrylamide gel was 5 x 10(-6) cm(2) s(-1). Methylmercury concentrations determined by DGT deployed for different time periods in the field are statistically not different from results obtained through direct measurements. The DGT technique represents therefore an alternative in situ sampling method for methylmercury. The detection limit of the overall method is 1 pg of MeHg, which correspond to approximately 30 pg L(-1) of MeHg in a water sample, when deploying a typical DGT device for 24 hours. Lower MeHg concentrations are measurable using longer deployment times or thinner diffusive gel layers.     

Regulation of the dissolved phosphate concentration of a mountainous stream, Kitakyushu, southwestern Japan

The phosphate concentration in mountainous stream water can be a measure of the forest condition, because its concentration will be low when the biomass in the forest is increasing and vice versa when the forest is declining. To investigate the seasonal change in the dissolved phosphate concentration of the mountainous stream water of the Yamakami River, Kitakyushu, from June 2009 to August 2010, and the regulation mechanism of the phosphate concentration, solid-phase spectrophotometry, which can be applicable to natural water without any pretreatment procedures, was employed for the determination of phosphate at μg P L(-1) levels in natural water. The phosphate concentrations in the mountainous stream waters at 6 sites ranged from 2.2 to 13 μg P L(-1), and those from the catchment area of the steady state forest were 5.3 ± 1.6 (±1 SD) μg P L(-1). Changes in the concentration were fairly small even during a storm runoff. The average phosphate concentration of rain was 2.8 ± 0.7 μg P L(-1), about half of the concentration in the stream water. The rate of runoff in forest areas is generally considered to be about 50% of the total precipitation. For a forest under a climax condition, the phosphate concentration is estimated to be regulated by the fallout and evapotranspiration (α = 0.05). At one of the sites, an upstream tributary, where a fairly big landslide occurred before July in 2009, the phosphate concentration was the highest, suggesting that the biomass may still be decreasing. For all of the six sites examined, a characteristic seasonal change in phosphate concentration was observed, reflecting the local budget between the biological decomposition of plant matter and the consumption by the biomass. The increase in the phosphate concentration during late spring and early summer may result from the extensive decomposition of plant litter mainly supplied in autumn and of plant matter relating to spring blooming such as fallen flowers, pollen and immature fruits. The proposed method using the phosphate concentration in surface stream waters without the period of the seasonal change mentioned above is expected to be very helpful in diagnosing the condition of forests.     

Restoration of the Kissimmee River, Florida: Water Quality Impacts from Canal Backfilling

The planned restoration of the Kissimmee River ecocystem will backfill approximately 35 km of flood control canal (C-38) that cuts through the meandering river channel, re-establish natural flow patterns, and restore the river/floodplain ecosystem. Water quality monitoring, including nutrients, total suspended solids (TSS), turbidity, dissolved oxygen (DO), and mercury, was conducted during a pilot `test fill' project to determine if soil disturbance during canal backfilling would negatively impact these water quality constituents. Surface water nutrient concentrations varied little between sites. Generally, highest concentrations occurred prior to construction, with lowest concentrations occurring during and after construction. During construction, TSS concentrations increased at sites immediately upstream, downstream, and adjacent to the construction area. Increased turbidity was generally restricted to areas immediately upstream and downstream of the test plug, with maximum levels occurring during the initial construction phase. Some downstream increases in turbidity were observed; however, impacts were short-term, lasting less than 24 h. Depresssed DO levels (<2 mg/l) were observed upstream of the test plug following completion of the initial plug across C-38. Dissolved oxygen levels remained low for approximately 6 weeks, with no apparent ecological impacts. Total mercury (HgT) within canal sediment ranged from 9.2–180 ng/g and methylmercury concentrations ranged from 0.037–0.708 ng/g. Concentration of total mercury and total methylmercury (MeHgT) in the backfill material were much lower than concentrations in the canal sediment. No significant change in aqueous HgT concentrations occurred over the sampling period, although construction-induced turbidity could have temporarily caused a slightly elevated concentration immediately downstream of the construction site. Methylmercury concentrations in the water column ranged from 0.033–0.518 ng/l. No significant differences in mean MeHgT concentrations occured between sites or between sampling dates, except at one downstream site where MeHgT declined significantly over the sampling period.     

Monitoring of copper,arsenic and antimony levels in agricultural soils impacted and non-impacted by mining activities,from three regions in Chile

This paper reports a comparative study of the concentration of three important environmental elements that are often found together in mineral deposits and then associated with mining activities; copper, arsenic and antimony. These elements were determined in 26 different agricultural soils from regions I, II and V in Chile, zones where the most important and biggest copper industries of this country are located. As background levels of these elements in soils have not been well established, in this study, both, impacted and non-impacted agricultural soils from different regions were considered. The relationships between the concentrations of these elements in soils were also examined. The concentration ranges for copper, arsenic and antimony were 11-530; 2.7-202 and 0.42-11 mg kg(-1) respectively. The copper concentrations in non-polluted soils from the north and central zone of Chile were similar. However, three sites from the north region have copper concentration as higher as 100 mg kg(-1), values that exceed the critical concentration for copper in soils. The concentration of arsenic and antimony in the north soils were higher than in non-impacted ones and, in the case of arsenic, greatly exceeded the world average concentration reported for this element in soils. The highest arsenic and antimony concentrations were found in Calama and Quillagua soils, two different sites in the Loa valley. The arsenic/antimony concentration ratio was higher in Quillagua soil. The high concentrations of three elements determined in impacted soils from region V (Puchuncaví and Catemu valleys) clearly shows the impact produced in this zone by the industrial and mining activities developed in their proximities. At Puchuncaví valley a clear decrease was observed in copper, arsenic and antimony concentrations in soils on the function of the distance from the industrial complex "Las Ventanas", and all concentrations exceeded the reported critical values for this matrix. Instead at Catemu valley, only the copper concentration was higher than this value. Statistically significant correlation was found for Cu-Sb in all soils; more significant Cu-As, Cu-Sb and Sb-As correlations were evaluated for soils from Puchuncaví and Catemu valleys, corroborating that high concentrations of copper, arsenic and antimony in these soils coming from the same pollution sources, the copper industry and the thermoelectric power plant.