Estimation of bacteriological levels in surface water samples to evaluate their contamination profile

The present work deals with the assessment of bacteriological contamination along with some physico-chemical parameters of water samples from Lahore canal. ANOVA showed that the observed p values of log-transformed viable plate counts, total suspended solids, turbidity, and biological oxygen demand are 0.000, 0.000, 0.000, and 0.000, respectively, which are <0.05, while the p value of total coliforms, total fecal coliforms, and Escherichia coli are 0.728, 0.827, and 0.081, respectively which are >0.05. Significant correlation was observed between log-transformed viable plate counts (CFU), biological oxygen demand, total suspended solids, and turbidity. Further regression analysis revealed that simple line regression model is fit for log-transformed viable plate counts and total suspended solids, log-transformed viable plate counts and turbidity, turbidity and total suspended solids, biological oxygen demand and total suspended solids, biological oxygen demand and log-transformed viable plate counts, and biological oxygen demand and turbidity.     

环境水体中吡唑硫磷残留量的测定及光降解规律研究

通过气相色谱—质谱联用仪(GC-MS)建立环境水体中吡唑硫磷残留量的测试方法,模拟光照的条件初步探讨不同浓度吡唑硫磷的光降解效率,优化不同固相萃取小柱对水样中的吡唑硫磷进行富集,使用GC-MS对浓缩后的样品进行定性与定量分析,通过对检测方法的特性指标进行确认,添加3种浓度的吡唑硫磷(0.2、1.0、2.0μg/L)在实...     

Monitoring E. coli and total coliforms in natural spring water as related to recreational mountain areas

Natural spring water has unique properties, as it is rich in minerals that are considered to be beneficial to human health. A survey of the microbiological quality of natural spring water was conducted to assess possible risks from the consumption of the water by visitors in recreational mountain areas located in Seoul, South Korea. The densities of total coliforms and Escherichia coli were measured during the spring and the summer of 2002 to investigate the presence of coliform bacteria in the drinking spring waters. Total coliforms were detected in all samples and the mean density of total coliforms was up to a maximum of 228 CFU/mL. Detectable E. coli was found in 78% of all samples and the mean densities of E. coli varied from a minimum of 0 CFU/mL to a maximum of 15 CFU/mL in all samples. Malfunctioning septic systems and wildlife population appear to be the main source of E. coli contamination. Presence of E. coli in natural spring water indicates potential adverse health effects for individuals or populations exposed to this water. The fecal contaminated spring water may present an unacceptable risk to humans if it is used as raw drinking water.     

Assessment of the school drinking water supply and the water quality in Pingtung County, Taiwan

In this study, a questionnaire survey of school drinking water quality of 42 schools in Pingtung County was conducted according to the water sources, treatment facilities, location of school as well as different grade levels. Among them, 45% of schools used tap water as the main source of drinking water, and the schools using groundwater and surface water as drinking water source account for 29% and 26%, respectively. The schools above senior high school level in the city used tap water as drinking water more than underground water, while the schools under junior high school level in the rural area used surface water as their main source of drinking water. The surface water was normally boiled before being provided to their students. The reverse osmosis system is a commonly used water treatment equipment for those schools using tap water or underground water. Drinking fountain or boiled water unit is widely installed in schools above senior high school level. For schools under junior high school level, a pipeline is stretched across the campus. Relative test shows that the unqualified rate of microbe in water is 26.2%. All parameters for physical and chemical properties and metal content had met the domestic standards except that the turbidity of schools under junior high school level using tap water is slightly higher than the standard value.     

Monitoring of glyphosate and AMPA in soil samples from two olive cultivation areas in Greece: aspects related to spray operators activities

The persistence of glyphosate and its primary metabolite AMPA (aminomethylphosphonic acid) was monitored in two areas in Southern Greece (Peza, Crete and Chora Trifilias, Peloponnese) with a known history of glyphosate use, and the levels of residues were linked to spray operators’ activities in the respective areas. A total of 170 samples were collected and analysed from both areas during a 3-year monitoring study. A new method (Impact Assessment Procedure - IAP) designed to assess potential impacts to the environment caused by growers’ activities, was utilised in the explanation of the results. The level of residues was compared to the predicted environmental concentrations in soil. The ratio of the measured concentrations to the predicted environmental concentrations (MCs/PECs) was >?1 in Chora the first 2 years of sampling and <?1 in the third year, whilst the MCs/PECs ratio was <?1 in Peza, throughout the whole monitoring period. The compliance to the instructions for best handling practices, which operators received during the monitoring period, was reflected in the amount of residues and the MCs/PECs ratio in the second and especially the third sampling year. Differences in the level of residues between areas as well as sampling sites of the same area were identified. AMPA persisted longer than the parent compound glyphosate in both areas.     

Assessment of elemental contaminants in water and fish samples from Aba river

The elemental contaminants in water and fish samples from Aba river were studied. The elements studied were Zn, Ni, As, Hg, Co and Mn. Three water samples and three samples of different fish species were collected from different locations in the river. The water and fish samples were analysed for elemental contaminants using Atomic Absorption Spectrophotometer (AAS). The elemental toxicants Zn and Mn were identified in appreciable amounts in fresh fish species namely, Lates niloticus and Oriochronis niloticus, of mean values 8.012 ppm and 0.861 ppm, respectively. The analysis also shows arsenic concentration of mean value 0.01 ppm in Lates niloticus. The analysis of frozen fish samples purchased from the Waterside market located near the river shows Ni and Hg levels of mean values 0.83 ppm and 0.02 ppm, respectively. The levels of elemental contaminants As, Zn, Hg and Mn from the water samples have mean values 0.082 ppm, 11.284 ppm, 0.201 ppm and 1.024 ppm, respectively. There are five industries that discharge waste products into Aba river. In view of this, there is a need to determine the level of pollution of the river, since the inhabitants depend on the river for their drinking water, fishing and other domestic uses. This study is aimed at determining the level of heavy metal toxicants in fish and water samples from the river. The effect of these elemental contaminants and the associated health hazards were examined.     

An online preconcentration system for the determination of uranium in water and effluent samples

Amberlite XAD-4 resin functionalized with β-nitroso-α-naphthol was applied to an online system for the preconcentration and determination of uranium. U (VI) ions were retained on the minicolumn at an appropriate pH and then desorbed with acid solution. The amount of uranium in the eluate was measured spectrophotometrically at 650 nm using Arsenazo III as a colorimetric reagent. The limit of detection and the preconcentration factor were 1.8 μg L^???1 and 10, respectively. The chemical and flow variables affecting the preconcentration were studied. The influence of several ions on the system was also investigated. The method was successfully applied for the evaluation of uranium in water and in effluent samples.     

Ultra-sensitive quantification of copper in food and water samples by electrochemical adsorptive stripping voltammetry

A new electrochemical adsorptive stripping voltammetry method was developed for the determination of trace amounts of copper in food and water samples. The study of electrochemical behavior of Cu ion indicated that Cu(II) and Schiff base formed a complex in H₃BO₄–NaOH buffer solution (pH?=?7.25). An accumulation potential of ?100 mV (vs Ag/AgCl) was applied while the solution was stirred for 60 s. The response curve was recorded by scanning the potential, and the peak current of ?0.31 V (vs Ag/AgCl) was recorded. The peak current and concentration of copper accorded with linear relationship in the range of 0.04–120 ng mL^?1. The relative standard deviation (for 12 ng mL^?1 of copper) was 1.73 %, and the detection limit was 0.007 ng mL^?1. The possible interference of some common ions was studied. The proposed method was applied to the determination of copper in water, rice, wheat, tea, milk, and tomato with satisfactory results.     

Iodide-assisted total lead measurement and determination of different lead fractions in drinking water samples

Lead and its compounds are toxic and can harm human health, especially the intelligence development in children. Accurate measurement of total lead present in drinking water is crucial in determining the extent of lead contamination and human exposure due to drinking water consumption. The USEPA method for total lead measurement (no. 200.8) is often used to analyze lead levels in drinking water. However, in the presence of high concentration of the tetravalent lead corrosion product PbO(2), the USEPA method was not able to fully recover particulate lead due to incomplete dissolution of PbO(2) particles during strong acid digestion. In this study, a new procedure that integrates membrane separation, iodometric PbO(2) measurement, strong acid digestion and ICP-MS measurement was proposed and evaluated for accurate total lead measurement and quantification of different lead fractions including soluble Pb(2+), particulate Pb(II) carbonate and PbO(2) in drinking water samples. The proposed procedure was evaluated using drinking water reconstituted with spiked Pb(2+), spiked particulate Pb(II) carbonate and in situ formed or spiked PbO(2). Recovery tests showed that the proposed procedure and the USEPA method can achieve 93-112% and 86-103% recoveries respectively for samples containing low PbO(2) concentrations (0.018-0.076 mg Pb per L). For samples containing higher concentrations of PbO(2) (0.089-1.316 mg Pb per L), the USEPA method failed to meet the recovery requirement for total lead (85-115%) while the proposed method can achieve satisfactory recoveries (91-111%) and differentiate the soluble Pb(2+), particulate Pb(II) carbonate and PbO(2).     

Study of changes in bacterial and viral abundance in formaldehyde-fixed water samples by epifluorescence microscopy

Accurate measurement of bacterial and viral abundance in coastal marine environments is important to understand the dynamics of microbial communities in these ecosystems. In this study, the effect of formaldehyde preservation on the abundance of bacteria and viruses in water samples from Cochin Backwater was determined by SYBR Green I staining and epifluorescence microscopy. The counts were determined for 45 days in samples fixed with 1?C6% formaldehyde. The results suggest rapid decline in counts of bacteria and viruses in samples preserved in formaldehyde, and the decline increased with increase in the final concentration of formaldehyde in the sample. The initial bacterial and viral counts in the sampling site were 5.2 × 10⁶/ml and 3.9 × 10⁷/ml, respectively. The bacterial count dropped by 5.1%, 53.3%, 55.7%, and 85% after 1, 7, 15, and 45 days, respectively, in sample fixed with 1% formaldehyde. The decline in viral counts was higher, being 32.4%, 47.9%, 68.1%, and 93% after 1, 7, 15, and 45 days, respectively. Storage of fixed samples at ??20°C did not halt the decline in microbial counts, suggesting that, irrespective of storage temperature, formaldehyde-fixed samples lead to underestimation of microbial counts.     

New kinetic-spectrophotometric method for monitoring the concentration of iodine in river and city water samples

A new kinetic method has been developed for the determination of iodine in water samples. The method is based on the catalytic effect of I^? with the oxidation of Indigo Carmine (IC) by KBrO₃ in the sulfuric acid medium. The optimum conditions obtained are 0.16 M sulfuric acid, 1?×?10^?3 M of IC, 1?×?10^?2 M KBrO₃, reaction temperature of 35°C, and reaction time of 80 s at 612 nm. Under the optimized conditions, the method allowed the quantification of I^? in a range of 12–375 ng/mL with a detection limit of 0.46 ng/mL. The method was applied to the determination of iodine in river and city water samples with the satisfactorily results.     

Utilization of the solid sorbent media in monitoring of airborne cyclophosphamide concentrations and the implications for occupational hygiene

The main objective of the study was to evaluate the applicability of two solid sorbent media (Anasorb 708 and Strata X), the impinger filled with distilled water and PTFE filters for determination of airborne cyclophosphamide (CP) in the hospital working environment. For this purpose, air contamination of Masaryk Memorial Cancer Institute (Czech Republic) was monitored using the sampling apparatus containing the samplers described above. In addition, the surface contamination was also determined using the wipe sampling technique. During the monitoring, contamination of three different workplaces (storage room, preparation room and outpatient clinic) was studied. Using Strata X solid sorbent tubes, airborne CP was determined in all (n = 5) samples collected at the outpatient clinic over a 5 day monitoring period (concentration range: 0.3-4.3 ng m(-3)). Other samplers (including PTFE filters) did not collect any detectable amount of CP (the limit of detection, LOD ≤ 0.1 ng m(-3)). Negative results detected at filter samples indicate that CP determined at Strata X samples was most probably of gaseous origin. Surface contamination ranged from <2 to 19, <8 to 418 and 133-15,500 pg cm(-2) at the storage room, preparation room and outpatient clinic, respectively. The study showed that evaporation of antineoplastic drugs should not be neglected, albeit the concentrations determined in our study are relatively low. Therefore, proper monitoring of airborne contamination should involve simultaneous sampling of both particle-bonded and gaseous phases. In this way, Strata X sorbent tubes seem to be an effective tool for the sampling of gaseous CP in the indoor air.     

The determination and distribution of Zn in surface water samples collected in the northeast Atlantic Ocean

Dissolved Zn concentrations were determined in surface water samples collected on-line along transects in the eastern North Atlantic in spring (March 1998). Two frontal zones could be identified in the research area by a change in salinity, temperature and nutrient concentrations. One zone was identified at 42 degrees N, separating the North Atlantic central water (NACW) and the Atlantic surface water (ASW) from each other, and another one crossing the continental slope at 12 degrees and 8 degrees E, respectively. Variability in Zn concentrations was observed near these zones, not only as a result of a change of water mass, but also due to external Zn sources. Surface Zn concentrations were 0.5-1 nM and 2 nM in the NACW and ASW, respectively, increasing to 4 nM over the continental shelf and finally 5-6 nM in the English Channel. Contributions of Zn derived from shelf sediments appear to be the major source for the enriched surface values in the continental zone.     

Determination of organophosphorus pesticides and related compounds in water samples by membrane extraction and gas chromatography

A membrane extraction-gas chromatography method was developed fordetermination of organophosphorus pesticides and related compounds including methamidophos, DDVP, dimethoate, methyl parathion, parathion, thiophosphoric acid trimethyl ester, and thiophosphoramidic acid dimethyl ester in water samples. In thismethod, surface-modified acetic cellulose membranes were used to extract the target analytes in water samples, the extracted analytes were back-extracted into a small amount of methanol, andgas chromatography with pulsed flame photometric detector (GC-PFPD) was used to determine the concentrations of targetanalytes in the extracts. The recoveries obtained for thetarget analytes spiked into the water samples ranged from 66to 94%. The method detection limit for each target analyte was 0.05 g L^-1. The method developed in this study had shown the advantages of being cheap, simple, fast, and reliable. It had been used successfully to determine the concentrations of target analytes in river water samples.     

Estimation of uranium and radon concentration in some drinking water samples of Upper Siwaliks, India

Uranium and radon concentration was assessed in water samples taken from hand pumps, natural sources and wells collected from some areas of Upper Siwaliks, Northern India. Fission track registration technique was used to estimate the uranium content of water samples. The uranium concentration in water samples was found to vary from 1.08 +/- 0.03 to 19.68 +/- 0.12 microg l(-1). These values were compared with safe limit values recommended for drinking water. Most of the water samples were found to have uranium concentration below the safe limit of 15 microg l(-1) (WHO, World Health Organization, Guidelines for drinking-water quality (3rd ed.). Geneva, Switzerland: WHO, 2004). The radon estimation in these water samples was made using alpha-scintillometry to study its correlation with uranium. The radon concentration in these samples was found to vary from 0.87 +/- 0.29 to 32.10 +/- 1.79 Bq l(-1). The recorded values of radon concentration were within the recommended safe limit of 4 to 40 Bq l(-1) (UNSCEAR, United Nations Scientific Committee on the Effects of Atomic Radiations, Sources and effects of ionizing radiation. New York: United Nations, 1993). No direct correlation was found between uranium concentration and radon concentration in water samples belonging to Upper Siwaliks. The values of uranium and radon concentration in water were compared with that from the adjoining areas of Punjab state, India.     

Occurrence of haloacetic acids (HAAs) and trihalomethanes (THMs) in drinking water of Taiwan

In this study, water samples were collected from 86 water treatment plants for analysis of haloacetic acids (HAAs) and trihalomethanes (THMs) from February to March, 2007 and from July to August, 2007. Both seasonal and geographical variations of disinfection by-products (DBPs) in drinking water of Taiwan were presented. The results showed that the five HAA concentrations (HAA5) were 1.0–38.9 μg/L in the winter and 0.2–46.7 μg/L in the summer; and the total THMs were ND-99.4 μg/L in the winter and ND-133.2 μg/L in the summer. For samples taken from the main Taiwan island, dichloroacetic acid (29.4–31.7%) and trichloroacetic acid (25.3–27.6%) were the two major HAA species, and trichloromethane was the major THM species (49.9–62.2%) in finished water. For water treatment plants located on the offshore islands outside of Taiwan, high bromide concentration was found in raw water, and higher percentage of brominated THMs and HAAs were formed in the overall formation. A statistically significant (P?<?0.005) logarithmic linear regression model was found to be useful to describe the correlations between TTHM and HAA5 or nine HAAs (HAA5?=?1.219 ×TTHM ^0.754, R ²?=?0.658; HAA9?=?1.824 ×TTHM ^0.735, R ²?=?0.678). No apparent difference was observed for DBPs concentrations between finished water and distribution samples in this study.     

The prevalence of bacterial resistance in clinical, food, water and some environmental samples in Southwest Nigeria

The resistance pattern and mechanisms of bacterial isolates obtained from clinical origin, soil, industrial effluent, orange juice products and drinking water were studied using commonly used antibiotics. The microbial load of the water samples, industrial effluent and orange juice products were 1.0 × 10¹–2.25 × 10⁶, 2.15 × 10⁵, and 3.5 × 10⁴–2.15 × 10⁵ cfu mL^–1, respectively. The faecal coliform test revealed that only two out of twenty orange juice products had MPN of 2 and 20, the MPN of water ranged from 1–1800, while the effluent had MPN of 1800. The bacterial isolates that were isolated include E. coli, S. aureus, P. vulgaris, S. marcescens, S. pyogenes, B. cereus, B. subtilis, Micrococcus sp., Klebsiella sp., P. aeruginosa, and Enterobacter sp. Also, clinical and soil isolates of P. aeruginosa were used in the study. Among the eight antibiotics tested for resistance on five strains of each bacterium, seven different resistance patterns were observed among the bacterial isolates obtained from water, effluent and orange juice products. Among the clinical and soil isolates of P. aeruginosa, four multiple-drug resistance patterns were obtained. Thirty strains of E. coli and S. aureus were tested for -lactamase production and fourteen strains, seven each of E. coli and S. aureus that had high Minimum Inhibitory Concentration values (MIC) for both Amoxycillin and Cloxacillin were positive.