An assessment of metal pollution in surface sediments of Seyhan dam by using enrichment factor, geoaccumulation index and statistical analyses

The aim of this study was to determine if high concentrations of any heavy metals exist in the sediment of Seyhan Dam reservoir to be considered toxic to the aquatic environment. Surface sediment samples from five stations in the Seyhan dam were collected quarterly from 2004 to 2005 and examined for metal content (Cr, Zn Cu, Mn, Cd, Fe, Ca, K, and Na), organic matter, and grain size. Correlation analyses showed that metal content of Seyhan dam sediment was affected by organic matter and grain size. The results have been compared with values given in the literature. The evaluation of the metal pollution status of the dam was carried out by using the enrichment factor and the geoaccumulation index. A comparison with sediment quality guideline values has also been made. Based on the enrichment factor, dam sediments were treated as a moderately severe enrichment with Cd and minor enrichment with Cr and Mn. The results of geoaccumulation index reveal that sediments of Seyhan Dam were strongly polluted in stations 1, 2, 4, and 5, and were moderately polluted in station 3 with Cd. Moreover, Cd and Cr concentrations in the sediments were above TECs except ERL for Cd.     

Water-soluble species and heavy metal contamination of the petroleum refinary area,Jordan

The levels of lead, cadmium, copper, zinc, aluminum, chromium, and iron in street dust, soil, and plants in the Jordanian petroleum refinery were determined using flame and graphite-furnace atomic absorption spectrophotometry. Major cations (Li+, Na+, NH4+, K+, Mg2+, and Ca2+) and anions (F-, Cl-, NO3-, SO4(2-), and Br-) were also determined using suppression mode ion chromatography. Generally, higher levels of the heavy metals studied were found in street dust samples than in soil samples. On the other hand, except Cl-, and Li+ ions, other anions and cations showed higher concentrations in soil than in street dust samples. For plant samples, unwashed samples showed higher levels of heavy metals than their washed counterparts, indicating that dust fall is a source of heavy metal contamination.     

Heavy metal enrichment in surface sediments from the SW Gulf of Mexico

The south west coastal zone in the Gulf of Mexico is an area with great industrial and agricultural development, which experiences intensive prospecting and extraction of hydrocarbons. After running through industrial, agricultural, and urban areas, waters from both the Jamapa River and La Antigua River arrive here. The rivers’ discharge areas of influence were estimated considering the textural and chemical composition of the supplied sediments. The main factors that determine sediment distribution were mineralogy, heavy minerals, carbonates, and anthropic contributions. The presence of metals in excess was evaluated using various pollution indicators, such as the enrichment factor, contamination factor, modified contamination factor, and geo-accumulation indexes. Data from different used contamination indexes show metal enrichments in As, Cu, Zn, Co, Cr, and V in La Antigua; As, Cu, and Cr in Jamapa; and As, Zn, and Pb in the Continental slope area. The adverse effects of metals on aquatic organisms were assessed using sediment quality guidelines that show Ni, As, Cu, and Cr may produce adverse effects on coastal areas. There was no evidence of contamination associated to the oil industry.     

Spatial distribution and metal contamination in the coastal sediments of Al-Khafji area,Arabian Gulf,Saudi Arabia

To document the spatial distribution and metal contamination in the coastal sediments of the Al-Khafji area in the northern part of the Saudi Arabian Gulf, 27 samples were collected for Al, V, Cr, Mn, Cu, Zn, Cd, Pb, Hg, Sr, As, Fe, Co, and Ni analysis using inductively coupled plasma-mass spectrometer (ICP-MS). The results revealed the following descending order of the metal concentrations: Sr > Fe > Al > As > Mn > Ni > V > Zn > Cr > Cu > Pb > Co > Hg > Cd. Average levels of enrichment factor of Sr, As, Hg, Cd, Ni, V, Cu, Co, and Pb were higher than 2 (218.10, 128.50, 80.94, 41.50, 12.31, 5.66, 2.95, 2.90, and 2.85, respectively) and that means the anthropogenic sources of these metals, while Al, Zn, Cr and Mn have enrichment factor less than 2, which implies natural sources. Average values of Sr, Hg, Cd, Cr, Ni, and As in the coastal sediments of Al-Khafji area were mostly higher than the values recorded from the background shale and earth crust and from those results along coasts of the Caspian Sea and the Mediterranean Sea. The highest levels of Cu in the northern part of the studied coastline might be due to Al-Khafji desalination plant, while levels of Al, Ni, Cr, Fe, Mn, Pb, and Zn in the central part may be a result of landfilling and industrial sewage. The highest levels of As, Cd, Co, Cu, Hg, and V in the southern part seem to be due to oil pollutants from Khafji Joint Operations (KJO). The higher values of Sr in the studied sediments in general and particularly in locality 7 could relate to the hypersalinity and aragonitic composition of the scleractinian corals abundant in that area.     

Heavy metal in surface sediments of the Liaodong Bay, Bohai Sea: distribution, contamination, and sources

In an effort to assess the potential contamination and determine the environmental risks associated with heavy metals, the surface sediments in Liaodong Bay, northeast China, were systematically sampled and analyzed for the concentrations of Cu, Pb, Zn, Cr, Ni, As, and Hg. The metal enrichment factor (EF) and geoaccumulation index (I _geo) were calculated to assess the anthropogenic contamination in the region. Results showed that heavy metal concentrations in the sediments generally met the criteria of China Marine Sediment Quality (GB18668-2002); however, both EF and I _geo values suggested the elevation of Pb concentration in the region. Based on the effect-range classification (TEL-PEL SQGs), Cu, Pb, Ni, and As were likely to pose environment risks, and the toxic units decreased in the order: Ni?>?Pb?>?Cr?>?Zn?>?As?>?Cu?>?Hg. The spatial distribution of ecotoxicological index (mean-ERM-quotient) suggested that most of the surface sediments were “low–medium” priority zone. Multivariate analysis indicated that the sources of Cr, Ni, Zn, Cu, and Hg resulted primarily from parent rocks, and Pb or As were mainly attributed to anthropogenic sources. The results of this study would provide a useful aid for sustainable marine management in the region.     

Assessment of heavy metal enrichment in the offshore fine-grained sediments of the Caspian Sea

Sampling of the offshore seabed sediments of southwestern part of the Caspian Sea was carried out by gravity corer in order to study heavy metal concentration and the physicochemical factors controlling their distribution in the fine-grained fraction. The grain size distribution, amount, and type of clay minerals, total organic carbon (TOC) content, and Eh–pH of the sediments were determined. The average concentrations of the heavy metals in ppm are Mn (563), Cu (207.5), Sr (187), Zn (94), Pb (26.3), Ni (14.5), Co (11.5), Cd (2.56), and Ag (1.04) in their order of abundances. Co and Zn mostly indicate increase in silt-size fraction of the sediments suggesting their probable detrital provenance but the Mn, Ni, Cu, Sr, Pb, Cd, and Ag concentrations show a similar trend to distribution of the clay-size fraction. The concentrations of Mn, Co, and Cd increase with increase in the TOC content but the Cu, Pb, Ni, Ag, and Sr concentrations decrease with increase of the TOC content. The amounts of Zn, Cu, Sr, Pb, Cd, and Ag increase with increase in the CaCO₃ content. The calculated enrichment factor indicates that the sediments are very strong to extremely enriched in Ag, significantly enriched in Cu and Cd, and depleted to mineral for Pb, Sr, Co, Ni, and Zn. Variations of the Cu, Sr, Cd, Ag, and Pb concentrations are similar to the clay and CaCO₃ distributions.     

Distribution and temporal variation of trace metal enrichment in surface sediments of San Jorge Bay, Chile

Cu, Pb, and Hg concentrations were determined in surface sediment samples collected at three sites in San Jorge Bay, northern Chile. This study aims to evaluate differences in their spatial distribution and temporal variability. The highest metal concentrations were found at the site “Puerto”, where minerals (Cu and Pb) have been loaded for more than 60 years. On the other hand, Hg does not pose a contamination problem in this bay. Cu and Pb concentrations showed significant variations from 1 year to another. These variations seem to be a consequence of the combination of several factors, including changes in the loading and/or storage of minerals in San Jorge Bay, the dredging of bottom sediments (especially at Puerto), and seasonal changes in physical–chemical properties of the water column that modify the exchange of metals at the sediment–water interface. Differences in the contamination factor and geoaccumulation index suggest that pre-industrial concentrations measured in marine sediments of this geographical zone, were better than geological values (average shale, continental crust average) for evaluating the degree of contamination in this coastal system. Based on these last two indexes, San Jorge Bay has a serious problem of Cu and Pb pollution at the three sampling locations. However, only Cu exceeds the national maximum values used to evaluate ecological risk and the health of marine environments. It is suggested that Chilean environmental legislation for marine sediment quality—presently under technical discussion—is not an efficient tool for protecting the marine ecosystem.     

Heavy metal contamination of road-deposited sediments in a medium size city of China

The aim of this paper is to determine and compare the environmental factors controlling vertical colonisation of periphyton on Sparganium erectum in a shallow eutrophic turbid lake, Manyas Lake, and an oligo-mesotrophic deep lake, Sapanca Lake, Turkey during the July 1997--November 1998. To investigate the effect of the environmental factors on periphyton colonization on S. erectum, the stem was cut above the rhizomes and subdivided into three equal sections. Multivariate statistical analyses have been applied to clarify relationships between environmental variables and periphyton colonization on S. erectum. Results indicated that physical disturbance and trophic level of the lakes influenced the colonization of the periphyton. Among the measured parameters, low light intensity, total suspended solids, temperature and water level fluctuation were observed as driving factors in Manyas Lake whereas nutrient deficiency was found as key factor in Sapanca Lake. The zonation of the periphyton, density, composition and dominant/subdominant taxa were significantly different in these lakes. However, Oedogonium sp., Mougeotia sp., Cylindrocapsa sp., Cladophora glomerata (Linn.), Aulacoseira italica (Ehr.) Simonsen, Melosira varians C. Agardh, Navicula tripunctata (O.F. Müller) Bory and Fragilaria ulna (Nitzsch) Lange-Bertalot were found as dominant species at all sections of S. erectum both in Manyas Lake and Sapanca Lake. It can be thought that these species have a broad range of tolerance to several physical, chemical and hydrologic disturbances. This is the first study to introduce how much the water quality and hydrologic drivers have affected vertical colonization of periphyton on S. erectum in two lakes with different mixing regimes.     

Evaluation of metal contamination in sediments from north of Morocco: geochemical and statistical approaches

Concentrations of Fe, Mn, Cr, Cu, Ni, Pb, Zn, Cd and Hg were evaluated in surface sediments of two rivers from north of Morocco, known as Souani and Mghogha rivers. Significantly higher concentrations in mg kg^???1 dry weight (dw) of Mn (747.6 vs. 392.9), Cr (86.4 vs. 56.3), Zn (299.5 vs. 138.5) were found in sediment samples from Mghogha when compared with Souani river. Average concentrations of Cd and Hg in several sediment samples from both rivers were above the effect range median that predicts toxic effects to aquatic organisms. The calculation of enrichment factors showed that Mn, Cr, Cu and Ni were depleted, whereas Pb and Hg were enriched. The results of geoaccumulation index revealed that sediments of both rivers were unpolluted with most of the metals and moderately contaminated with Fe and Hg. Some of elevated concentrations of Hg, principally in Mghogha River, were due to anthropogenic sources including the direct discharges of industrial zone.     

Seasonal variation in heavy metal contamination in water and sediments of river Sabarmati and Kharicut canal at Ahmedabad, Gujarat

The objective of the study is to reveal the seasonal variations in the river water and sediment quality with respect to heavy metal contamination. To get the extent of trace metals contamination, water and sediment samples were collected from five different sites along the course of Sabarmati River and its tributary Kharicut canal in pre-monsoon, monsoon and post-monsoon seasons. The concentration of trace metals such as chromium, copper, lead, nickel and zinc was determined using inductively coupled plasma spectroscopy. The concentrations of heavy metals were found to be higher in the pre-monsoon season than in the monsoon and post-monsoon seasons in water samples. The pollution load index, contamination factor and degree of contamination (C _d) in sediments were calculated to know the extent of anthropogenic pressures. The values of C _d clearly indicated very high degree of contamination at Kharicut canal (S-4: 32.25 and S-5: 54.52) and considerable degree of contamination at three sites of Sabarmati river viz; S-1, S-2 and S-3 with values 14.30, 14.42 and 17.21, respectively. Lead and nickel could not be traced in any of the river water samples.     

Application of sequential leaching, risk indices and multivariate statistics to evaluate heavy metal contamination of estuarine sediments: Dhamara Estuary, East Coast of India

In the present study, concentration of some selected trace metals (Fe, Mn, Ni, Co, Pb, Zn, Cu, Cr and Cd) are measured in Brahmani, Baitarani river complex along with Dhamara estuary and its near shore. Chemical partitioning has been made to establish association of metals into different geochemical phases. The exchangeable fraction is having high environmental risk among non-lithogeneous phases due to greater potential for mobility into pore water. The metals with highest bio-availability being Cd, Zn and Cr. The metals like Mn, Zn, Cd and Cu represent an appreciable portion in carbonate phase. Fe–Mn oxides act as efficient scavenger for most of the metals playing a prime role in controlling their fate and transport. Among non-lithogeneous phases apart from reducible, Cr showed a significant enrichment in organic phase. Risk assessment code values indicate that all metals except Fe fall under medium-risk zone. In estuarine zone Cd, Zn, Pb and Cr are released to 32.43, 26.10, 21.81 and 20 %, respectively, indicating their significant bio-availability pose high ecological risk. A quantitative approach has been made through the use of different risk indices like enrichment factor, geo-accumulation index and pollution load index. Factor analysis indicates that in riverine zone, Fe–Mn oxides/hydroxides seem to play an important role in scavenging metals, in estuarine zone, organic precipitation and adsorption to the fine silt and clay particles while in coastal zone, co-precipitation with Fe could be the mechanism for the same. Canonical discriminant function indicates that it is highly successful in discriminating the groups as predicted.     

Trend analysis in water quality of Al-Wehda Dam,north of Jordan

Temporal status and trends in water quality of Al-Wehda Dam, Jordan, from 2006 to 2012 indicate that the dam is subject to a combination of impacts from rainstorm and agricultural runoffs. It also revealed that mineral dissolution, sediment load, rainfall events, evaporation, and water-level fluctuation are the major contributors to variations in water quality. The water chemistry of the impounded Al-Wehda Reservoir showed that Na, Ca, Mg, HCO₃, and Cl are the principal ions, reflecting the dominance of carbonate weathering, with some contribution of silicates. The pH values showed a cyclic pattern with highest values observed in the spring seasons. Total dissolved solids (TDS), Ca, Mg, and HCO₃ are primarily related to leaching and evaporation, with elevated levels that occurred in the rainy winter months. In contrast, seasonal patterns in Na, K, Cl, and NH₄–N contents showed decreased values in winter. Peaks in NO₃–N observed in winter are strongly associated with agricultural runoff. Fluctuations in chlorophyll-a level were coincided with low ratio of total nitrogen (TN) to total phosphorus (TP). Seasonal variations in organic matter content were also apparent, with peaks that generally occurred in spring through early fall corresponding with high algal growth. On an annual basis, the vast majority of water quality data have generally declined, particularly, in 2011. However, it is not clear whether these decreases are related to change in management practices within the Yarmouk basin, or protective measures have been implemented. Comparison of in-lake and post-dam water quality from 2009 to 2011 showed variation in concentrations, where Ca, HCO₃, NO₃–N, Mg, and TDS showed relatively greater post-dam values than in-lake water, whereas pH, Na, Cl, K, COD, BOD₅, and chlorophyll-a were consistently lower in post-dam water. This comparison emphasizes the importance of self-purification capacity of Al-Wehda Dam in reducing some contaminants.     

Butyltin contamination in sediments and seawater from Kaohsiung Harbor, Taiwan

The distribution of butyltin (BT) compounds in the sediments and seawater, at the river outfalls, fishing ports, shipyards, and industrial zone docks of Kaohsiung Harbor, Taiwan were investigated. Twenty sediment and seawater samples were collected from various locations in the Harbor in 2006 and analyzed for monobutyltin (MBT), dibutyltin (DBT), and tributyltin (TBT). Results showed that the concentration of total BTs varied from 1.5 to 151 ng/g in sediment samples, with TBT being the major component of the sediment samples. This suggests that sediments could be the most possible sink of TBT brought by the sorption mechanism. The concentrations of BTs ranged from 9.7 to 270 ng/L in seawater samples, whereas DBT and MBT, the degradation byproducts of TBT, were mainly the most abundant BT compounds of the seawater samples. This indicates that the abiotic or biotic degradation potential of TBT was significant. Spatially, the highest concentrations of BTs were observed in both water and sediment samples collected from the shipyard and fishing port areas. This indicates that the shipping-related activities (e.g., navigation, ship repair, and ship building) would contribute most of BTs in the environment. Results show that the concentrations of degradation products (DBT and MBT) were related closely to temperature, salinity, dissolved oxygen (DO), and chlorophyll-a of the seawater. This implies that seasonal changes of the water parameters controlled the degradation of TBT in seawater. The observed levels of BT compounds in both seawater and sediments were much higher than those required to induce toxic effects on marine organisms, suggesting that appropriate TBT control strategies should be taken in Kaohsiung Harbor.     

Use of Sediment Quality Guidelines and pollution indicators for the assessment of heavy metal and PAH contamination in Greek surficial sea and lake sediments

Eight different surface sediment samples (K1–K8) were collected from two separate areas of Lake Koumoundourou and two samples (E1 and E2) from one area of Elefsis Bay, Athens, Greece. The level of pollution attributed to heavy metals was evaluated using several pollution indicators. Degree of Contamination, Modified Contamination Degree and Geoaccumulation Indexes were applied in order to determine and assess the anthropogenic contribution of the selected six elements (Cr, Ni, Cu, Zn, As and Pb). Moreover, the adverse effects of the sediments to aquatic organisms, from both heavy metals and polycyclic aromatic hydrocarbons (PAHs), were determined by using Sediment Quality Guidelines. The results indicated that Lake Koumoundourou is contaminated with heavy metals in a moderate degree and almost 50 % of the sediments are associated with frequent observation of adverse effects, when it comes to Ni and occasional observation of adverse effects, when it comes to Cu, Zn and Pb. As far as PAHs are concerned, around 60 % of the samples can be occasionally associated to toxic biological effects according to the effect-range classification for phenanthrene, benzo(a)anthracene, chrysene and pyrene. Finally, samples taken from the north side of the lake are more contaminated with PAHs than the ones taken from the east side probably due to the existence of the water barrier which acts as a reservoir of PAHs.     

Distribution and accumulation of heavy metals in the sediments of Akkaya Dam,Nigde, Turkey

Twenty-one surface sediment samples were collected from Akkaya Dam. Heavy metal concentrations (Mo, Cu, Pb, Zn, Ni, Co, Mn, Fe, Cr, As, V and Cd), grain size, organic carbon and carbonate contents were studied in order to assess the extent of environmental pollution and to discuss the origin of these contaminants in sediments of dam. The sediments in the study area are mostly very fine sands. However, mud was observed in the northeast of the dam. Sediment pollution assessment was carried out using enrichment factor. The calculation of enrichment factors showed that Mo is depleted by 1.0 whereas Cu, Pb, Zn, Ni, Co, Mn, As, V, Cr and Cd are enriched by 3, 5.4, 7, 2.7, 2.2, 3.4, 42.3, 2.1, 1.8 and 7.2, respectively. Relatively high concentrations heavy metals occurred in north (textile industry area) and east (Karasu River) due to enrichment controlled by anthropogenic wastes. The results of correlation analysis show low–medium positive and negative correlations among metals, grain size, carbonate contents and organic carbon and indicate that heavy metals in sediments of the Akkaya Dam have different anthropogenic sources.     

Analysis of mosses and topsoils for detecting sources of heavy metal pollution: multivariate and enrichment factor analysis

In order to assess the contribution of emission sources to the pollution of areas remote from industrial facilities, a combined approach of enrichment factor analysis and multivariate statistics was used for detecting the origin of heavy metal pollution in the Zlatibor ecosystem, in Serbia. Samples of moss (Pleurozium schreberi, Hylocomium splendens, Scleropodium purum, Hypnum cupressiforme and Thuidum delicatulum) and of topsoil (0-5 cm) were collected in 2005. The concentrations of seven heavy metals (Cd, Cr, Cu, Mn, Ni, Pb and Zn) were determined in moss and soil samples by atomic absorption spectrometry. The results obtained by enrichment factor analysis and two multivariate statistical methods, principal component analysis and cluster analysis, enabled discrimination of the lithologic and anthropogenic sources of heavy metals in the mosses. Enrichment factors, calculated to evaluate the contribution to the metal content in moss from anthropogenic sources, revealed pollution of the investigated area by Cd and Pb, originating from long-range transport and fossil fuel burning.     

Effect of fishing vessels on trace metal contamination in sediments of three harbors along Iranian Oman Sea coast

In this study, the levels of natural and anthropogenic metal contamination (aluminum (Al), iron (Fe), manganese (Mn), arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn)) in surface sediments of three harbors along the Iranian coast of Gulf of Oman were examined and reported for the first time. Effect of grain size, mineralogy, normalization technique using Fe concentrations, and different sediment quality guidelines were discussed. Data from the harbors were compared with other harbors worldwide. Sediments inside the harbors are characterized by moderate and high levels of pollution by trace metals Cu (12–287 μg/g), Pb (11–1,780 μg/g), Zn (38–547 μg/g), Cr (70–2,370 μg/g), and Ni (31–116 μg/g). However, As and Cd did not show considerable pollution inside and outside the harbors. Considering that there is no industrial activity around the study harbors, the major sources of contamination in the harbors are repairing, fueling, greasing, and painting of fishing ships and boats. Mineralogy of sediments in the study area as well as trace metal concentration in reference samples taken from onshore geological units confirmed that natural inputs of Cd, Cu, Pb, and Zn in the harbors are very low while most of Ni and Cr contamination in the study area comes from erosion of ophiolitic mélange units at the North of Makran mountains.