Accumulation of Tobacco mosaic virus (TMV) at different depths clay and loamy sand textural soils due to tobacco waste application

The effects of tobacco waste (TW) application to the soil surface on the accumulation of Tobacco mosaic virus (TMV) in clay and loamy sand textural soils at various depths were investigated in two different fields. The tobacco waste had been found to be infected with TMV. Eighteen months after TW application to the soil surface, soils were sampled at 20 cm intervals through to 80 cm depth. The DAS-ELISA method was performed to determine infection of soil with TMV. The viruses persisted in clay soil for a long period compared with loamy sand soil. There was no accumulation of TMV at any depth of loamy sand soil in Experimental Field 2. TMV adsorption to soil particles in 0-60 cm depth of clay soil was determined in all TW treatments in Experimental Field 1. The highest ELISA Absorbance (A405) values in all treatments were determined in the 20-40 cm soil depth that had the highest clay content. ELISA A405 values of TMV at different depths of clay soil gave significant correlations with clay content (r = 0.793**), EC values (r = 0.421**) and soil pH (r = -0.405**). Adsorption of TMV to net negatively charged clay particle surfaces increased with increasing EC values of soil solution. Decreasing soil pH and infiltration rate increased adsorption of TMV to clay particles. Higher infiltration rate and lower clay content in loamy sand soil caused leaching of TMV from the soil profile.     

EFFECTS OF AN OIL SPILL ON SOIL PHYSICO-CHEMICAL PROPERTIES OF A SPILL SITE IN A TYPIC PALEUDULT OF MIDWESTERN NIGERIA

Physico-chemical analysis of soil samples at an oil spill sitein a Typic Paleudult of midwestern Nigeria showed that thetotal hydrocarbon content of top soil layers ranged from 0.6to 12.6 ppm in the heavy impact zone and the oil hadpenetrated to a depth of 9.2 m. Hydrocarbon concentration inthe medium impact zone ranged from 0.36 ppm while hydrocarbonswere not detected in 80% of samples from the unimpactedreference zone. Measurement of heavy metal concentrations inthe soil revealed a significant build-up (p< 0.05) of lead,iron and zinc in the heavy impact zone. Other parametersincluding electrical conductivity, exchangeable cations,available phosphorus and total nitrogen in impacted soils werecomparatively low while the total organic carbon was high,compared with the reference site. Textural class of soil fromthe different depths showed a predominantly brown sand at thetopsoil, loamy sand and grey fine sand at medium depths andred sandy clay at greater depths.     

Soil water, salt, and groundwater characteristics in shelterbelts with no irrigation for several years in an extremely arid area

This paper is based on long-term monitoring data for soil water, salt content, and groundwater characteristics taken from shelterbelts where there has been no irrigation for at least 5 years. This study investigated the distribution characteristics of soil water and salt content in soils with different textures. The relationships between soil moisture, soil salinity, and groundwater level were analyzed using 3 years of monitoring data from a typical oasis located in an extremely arid area in northwest China. The results showed that (1) the variation trend in soil moisture with soil depth in the shelterbelts varied depending on soil texture. The soil moisture was lower in sandy and loamy shelterbelts and higher in clay shelterbelts. (2) Salinity was higher (about 3.0 mS cm^?1) in clay shelterbelts and lower (about 0.8 mS cm^?1) in sandy shelterbelts. (3) There was a negative correlation between soil moisture in the shelterbelts and groundwater level. Soil moisture decreased gradually as the depth of groundwater table declined. (4) There was a positive correlation between soil salinity in the shelterbelts and the depth of groundwater table. Salinity increased gradually as groundwater levels declined.     

Development of an extraction method for perchlorate in soils

Perchlorate originates as a contaminant in the environment from its use in solid rocket fuels and munitions. The current US EPA methods for perchlorate determination via ion chromatography using conductivity detection do not include recommendations for the extraction of perchlorate from soil. This study evaluated and identified appropriate conditions for the extraction of perchlorate from clay loam, loamy sand, and sandy soils. Based on the results of this evaluation, soils should be extracted in a dry, ground (mortar and pestle) state with Milli-Q water in a 1 ratio 1 soil ratio water ratio and diluted no more than 5-fold before analysis. When sandy soils were extracted in this manner, the calculated method detection limit was 3.5 microg kg(-1). The findings of this study have aided in the establishment of a standardized extraction method for perchlorate in soil.     

Effects of an Oil Spill on Soil Physico-Chemical Properties of a Spill Site in a Typic Udipsamment of the Niger Delta Basin of Nigeria

Physico-chemical analysis of soil samples at an oil spill site in a Typic Udipsamment of the Niger Delta Basin of Nigeria showed that the total hydrocarbon content of top soil layers ranged from 18.6 to 23.6 ppm in the heavy impact zone and the oil had penetrated to a depth op 8.4 m. The concentration of hydrocarbons in the medium impact zone ranged from 10.04 to 10.38 ppm while hydrocarbons were not detected in 85% of samples from the unimpacted reference zone. Heavy metal concentration measurements in the soil revealed a significant build-up (P < 0.05) of lead, copper and zinc in the heavy impact zone. Other quality parameters including electrical conductity, exchangeable cations, total nitrogen and available phosphorus in impacted soils were relatively low, while the total organic carbon was high compared with the reference site. Textural class of soil from the different depths showed a predominantly brown sand at the topsoil, loamy sand and grey coarse sand at medium depths, and grey coarse sand and greyish sandy clay at greater depths.     

Soil adsorption studies of a rice herbicide,cyhalofop-butyl,in two texturally different soils of India

The ability of herbicides to be adsorbed by the soil and sediment and their tendency to be desorbed are some of the most important factors affecting soil and water contamination. Therefore, a sorption study was conducted to evaluate the adsorption of cyhalofop-butyl, butyl (2R)-2-[4-(4-cyano-2-fluorophenoxy) phenoxy] propanoate, in the sandy clay loam and clayey soils using a batch equilibrium method. The adsorption of cyhalofop-butyl was found positively related with the clay and organic carbon content. Freundlich constants (K _f) of cyhalofop-butyl in the clayey and sandy clay loam were found to be 13.39 and 2.21, respectively. Sorption coefficients (K _oc) and distribution coefficients (K _d) were found to be 265.38 and 2,092.79, and 1.38 and 11.48, for sandy clay loam and clayey soils, respectively. The adsorption isotherm suggested a relatively higher affinity of cyhalofop-butyl to the adsorption sites at low equilibrium concentrations. The low value of the soil organic carbon partition coefficient (K _oc) of cyhalofop-butyl in the sandy loam soil suggested its weaker adsorption in soil and thus increased its risk of mobility into water sources; hence, it should be used judiciously to prevent groundwater contamination     

Sorption of carbon tetrachloride,ethylene dibromide,and trichloroethylene on soil and clay

The sorption of carbon tetrachloride, ethylene dibromide, and trichloroethylene in two silty clay loam soils and aluminium (Al³⁺) or calcium (Ca²⁺) saturated montmorillonite clay was studied. When the adsorbents were exposed to environmental levels of these chemicals (10 to 1000 ppb in water) the amounts of each of the chemicals sorbed were 6% or less of that available except for a 17% sorption of trichloroethylene by Al-saturated clay. In the case of the Ca-saturated clay, there was no apparent sorption of carbon tetrachloride or trichloroethylene. When soil sorption was normalized based on the soil organic carbon content (K _oc) a correlation was found between the K _oc, water solubility, and octanol/water partitioning coefficients of the chemicals. However, carbon tetrachloride did not behave according to with the predicted relationships.     

Adsorption study of 14C-paraquat in two Malaysian agricultural soils

The adsorption equilibrium time and effects of pH and concentration of ¹⁴C-labeled paraquat (1,1^??-dimethyl-4,4^??-bipyridylium dichloride) in two types of Malaysian soil were investigated. The soils used in the study were clay loam and clay soils from rice fields. Equilibrium studies of paraquat in a soil and pesticide solution were conducted. Adsorption equilibrium time was achieved within 2 h for both soil types. The amount of ¹⁴C-labeled paraquat adsorbed onto glass surfaces increased with increasing shaking time and remained constant after 10 h. It was found that paraquat adsorbed by the two soils was very similar: 51.73 (clay loam) and 51.59 ?? g g^???1 (clay) at 1 ?? g/ml. The adsorption of paraquat onto both types of soil was higher at high pH, and adsorption decreased with decreasing pH. At pH 11, the amounts of ¹⁴C-labeled paraquat adsorbed onto the clay loam and clay soil samples were 4.08 and 4.05 ?? g g^???1, respectively, whereas at pH 2, the amounts adsorbed were 3.72 and 3.57 ?? g g^???1, respectively. Results also suggested that paraquat sorption by soil is concentration dependent.     

Artificial soils from alluvial tin mining wastes in Malaysia--a study of soil chemistry following experimental treatments and the impact of mycorrhizal treatment on growth and foliar chemistry

For decades Malaysia was the world's largest producer of Sn, but now the vast open cast mining operations have left a legacy of some 100,000 ha of what is effectively wasteland, covered with a mosaic of tailings and lagoons. Few plants naturally recolonise these areas. The demand for such land for both urban expansion and agricultural use has presented an urgent need for better characterisation. This study reports on the formation of artificial soils from alluvial Sn mining waste with a focus on the effects of experimental treatments on soil chemistry. Soil organic matter, clay, and pH were manipulated in a controlled environment. Adding both clay tailings and peat enhanced the cation exchange capacity of sand tailings but also reduced the pH. The addition of peat reduced the extractable levels of some elements but increased the availability of Ca and Mg, thus proving beneficial. The use of clay tailings increased the levels of macro and micronutrients but also released Al, As, La, Pb and U. Additionally, the effects of soil mix and mycorrhizal treatments on growth and foliar chemistry were studied. Two plant species were selected: Panicum milicaeum and Pueraria phaseoloides. Different growth patterns were observed with respect to the additions of peat and clay. The results for mycorrhizal treatment (live inoculum or sterile carrier medium) are more complex, but both resulted in improved growth. The use of mycorrhizal fungi could greatly enhance rehabilitation efforts on sand tailings.     

Soil properties and crop productivity as influenced by flyash incorporation in soil

Field experiments were carried out during 1996–97at Gulawathi, Muthiani and Salarpur Villages, IARI Farm, NewDelhi and NCPP Campus, Dadri to evaluate changes in soilcharacteristics and growth of wheat (Triticum aestivum L.),mustard (Brassica juncea L.), lentil (Lence esculentaMoench.), rice (Oryza sativa L.) and maize (Zea mays L.) byvarying amounts of flyash addition (up to 50t ha^-1) in soils atsowing/transplanting time of crops. Flyash addition in areasadjoining NCPP Thermal Power Plant, Dadri, Ghaziabad, U.P.ranged from 5–12 t ha^-1 yr^-1 in 1995–96. Shoot and root growthand yield of test crops at different locations after flyashincorporation resulted in beneficial effects of flyashaddition in most cases. The silt dominant texture of flyashimproved loamy sand to sandy loam textures of the surfacesoils at the farmers' fields. The increased growth in yield ofcrops with flyash incorporation was possibly due tomodifications in soil moisture retention and transmissioncharacteristics, bulk density, physico-chemical characterssuch as pH and EC and organic carbon content. The response offlyash addition in the soil on soil health and cropproductivity needs to be evaluated on long-term sustainableaspects.     

Predicting field capacity,wilting point,and the other physical properties of soils using hyperspectral reflectance spectroscopy: two different statistical approaches

In this study, we examined the ability of reflectance spectroscopy to predict some of the most important soil parameters for irrigation such as field capacity (FC), wilting point (WP), clay, sand, and silt content. FC and WP were determined for 305 soil samples. In addition to these soil analyses, clay, silt, and sand contents of 145 soil samples were detected. Raw spectral reflectance (raw) of these soil samples, between 350 and 2,500-nm wavelengths, was measured. In addition, first order derivatives of the reflectance (first) were calculated. Two different statistical approaches were used in detecting soil properties from hyperspectral data. Models were evaluated using the correlation of coefficient (r), coefficient of determination (R ²), root mean square error (RMSE), and residual prediction deviation (RPD). In the first method, two appropriate wavelengths were selected for raw reflectance and first derivative separately for each soil property. Selection of wavelengths was carried out based on the highest positive and negative correlations between soil property and raw reflectance or first order derivatives. By means of detected wavelengths, new combinations for each soil property were calculated using rationing, differencing, normalized differencing, and multiple regression techniques. Of these techniques, multiple regression provided the best correlation (P?<?0.01) for selected wavelengths and all soil properties. To estimate FC, WP, clay, sand, and silt, multiple regression equations based on first(2,310)-first(2,360), first(2,310)-first(2,360), first(2,240)-first(1,320), first(2,240)-first(1,330), and raw(2,260)-raw(360) were used. Partial least square regression (PLSR) was performed as the second method. Raw reflectance was a better predictor of WP and FC, whereas first order derivative was a better predictor of clay, sand, and silt content. According to RPD values, statistically excellent predictions were obtained for FC (2.18), and estimations for WP (2.0), clay (1.8), and silt (1.63) were acceptable. However, sand values were poorly predicted (RDP?=?0.63). In conclusion, both of the methods examined here offer quick and inexpensive means of predicting soil properties using spectral reflectance data.     

The effects of land use changes on some soil properties in İndağı Mountain Pass – Çankırı, Turkey

Understanding spatial variability of dynamic soil attributes provides information for suitably using land and avoiding environmental degradation. In this paper, we examined five neighboring land use types in Indagi Mountain Pass - Cankiri, Turkey to spatially predict variability of the soil organic carbon (SOC), bulk density (BD), textural composition, and soil reaction (pH) as affected by land use changes. Plantation, recreational land, and cropland were the lands converted from the woodland and grassland which were original lands in the study area. Total of 578 disturbed and undisturbed soil samples were taken with irregular intervals from five sites and represented the depths of 0-10 and 10-20 cm. Soil pH and BD had the lower coefficient of variations (CV) while SOC had the highest value for topsoil. Clay content showed greater CV than silt and sand contents. The geostatistics indicated that the soil properties examined were spatially dependent to the different degrees and interpolations using kriging showed the dynamic relationships between soil properties and land use types. The topsoil spatial distribution of SOC highly reflected the changes in the land use types, and kriging anticipated significant decreases of SOC in the recreational land and cropland. Accordingly, BD varied depending on the land use types, and also, the topsoil spatial distribution of BD differed significantly from that of the subsoil. Generally, BD greatly decreased in places where the SOC was relatively higher except in the grassland where overgrazing was the more important factor than SOC to determine BD. The topsoil spatial distributions of clay, silt, and sand contents were rather similar to those of the subsoil. The cropland and grassland were located on the very fine textured soils whereas the woodland and plantation were on the coarse textured soils. Although it was observed a clear pattern for the spatial distributions of the clay and sand changing with land uses, this was not the case for the silt content, which was attributed to the differences of dynamic erosional processes in the area. The spatial distribution of the soil pH agreed with that of the clay content. Soils of the cropland and grassland with higher amounts of clay characteristically binding more cations and having higher buffering capacities had the greater pH values when compared to the soils of other land uses with higher amounts of sand naturally inclined to be washed from the base cations by the rainwater.     

Consumption of methane by soils

Measurements of the methane flux and methane concentration profiles in soil air are presented. The flux of methane from the soil is calculated by two methods: a) Direct by placing a static open chamber at the soil surface. b) Indirect, using the ²²²Rn concentrations profile and the ²²²Rn flux in the soil surface in parallel with the methane concentration (²²²Rn calibrated fluxes). The methane flux has been determined in two kinds of soils (sandy and loamy) in the surroundings of Málaga (SPAIN). The directly measured methane fluxes at all investigated sites is higher than methane fluxes derived from Rn calibrated fluxes. Atmospheric methane is consumed by soils, mean direct flux to the atmosphere were - 0.33 g m^–2yr-1. The direct methane flux is the same within the measuring error in sandy and loamy soils. The influence of the soil parameters on the methane flux indicates that microbial decomposition of methane is primarily controlled by the transport of methane.     

Changes in labile soil organic matter fractions following land use change from monocropping to poplar-based agroforestry systems in a semiarid region of Northeast China

Labile fractions of soil organic matter (SOM) respond rapidly to land management practices and can be used as a sensitive indicator of changes in SOM. However, there is little information about the effect of agroforestry practices on labile SOM fractions in semiarid regions of China. In order to test the effects of land use change from monocropping to agroforestry systems on labile SOM fractions, we investigated soil microbial biomass C (MBC) and N, particulate organic matter C (POMC) and N (POMN), as well as total organic C (TOC) and total N (TN) in the 0- to 15-cm and the 15- to 30-cm layers in 4-year-old poplar-based agroforestry systems and adjoining monocropping systems with two different soil textures (sandy loam and sandy clay loam) in a semiarid region of Northeast China. Our results showed that poplar-based agroforestry practices affected soil MBC, POMC, and POMN, albeit there was no significant difference in TOC and TN. Agroforestry practices increased MBC, POMC, and POMN in sandy clay loam soils. However, in sandy loam soils, agroforestry practices only increased MBC and even decreased POMC and POMN at the 0- to 15-cm layer. Our results suggest that labile SOM fractions respond sensitively to poplar-based agroforestry practices and can provide early information about the changes in SOM in semiarid regions of Northeast China and highlight that the effects of agroforestry practices on labile SOM fractions vary with soil texture.     

Desorption Kinetics of Benzene in a Sandy Soil in the Presence of Powdered Activated Carbon

Desorption kinetics of benzene was investigated with a modified biphasic desorption model in a sandy soil with five different powdered activated carbon (PAC) contents (0, 1, 2, 5, 10% w/w) as sorbents. Sorption experiments followed by series dilution desorption were conducted for each sorbent. Desorption of benzene was successively performed at two stages using deionized water and hexane. Modeling was performed on both desorption isotherm and desorption rate for water-induced desorption to elucidate the presence of sorption–desorption hysteresis and biphasic desorption and if present to quantify the desorption-resistant fraction (q _irr) and labile fraction (F) of desorption site responsible for rapid process. Desorption isotherms revealed that sorption–desorption exhibited a severe hysteresis with a significant fraction of benzene being irreversibly adsorbed onto both pure sand and PAC, and that desorption-resistant fraction (q _irr) increased with PAC content. Desorption kinetic modeling showed that desorption of benzene was biphasic with much higher (4–40 times) rate constant for rapid process (k ₁) than that for slow process (k ₂), and that the difference in the rate constant increased with PAC content. The labile fraction (F) of desorption site showed a decreasing tendency with PAC. The experimental results would provide valuable information on remediation methods for soils and groundwater contaminated with BTEX.     

Status and habitat preferences for endemic inhabitants of fiddler crab Uca formosensis in Hsiang-Shan wetland, Taiwan

This article reports on soil samples collected from Hsiang-Shan wetland, Taiwan. Canonical discriminant analysis (CDA) was applied to identify an existing habitat type's scheme by identifying the physico-chemical properties of sediment in Hsiang-Shan wetland. The three constructed discriminant functions (CDFs) showed a marked contribution by most of the discriminant variables, and the recognition capacities in these three CDFs were 49.5, 32.8 and 17.7%. Our study revealed that the most important latent factors in Hsiang-Shan wetland are soil texture-caused factor, ocean current-caused factor, nutrient-caused factor, and the redox reaction-caused factor. And the most sensitivity parameters in this habitat followed the descending order: OBD, EC, Eh, sand, TN, porosity, STP, silt, VCP and pH. And the inhabited sediment properties for U. formosensis in terms of soil texture are sand, silt, and clay (34.05, 29.72, and 32.35%, respectively): that is clay loam soil. We also found that U. formosensis preferred to inhabit the upper intertidal zone, spending 8.41% of the time submerged. Vegetation coverage on the ground was less than 2.20%, showing that it preferred to live in a bare intertidal habitat. Concerning nest choosing, excavating burrows is more difficult when a high soil penetration force is required, and in this study the soil penetration force for 20 cm was found to be is 45.98 N/cm(2). The results will be helpful in developing a methodology for use by the government in refining its management programs.     

Fluoride in fractionated soil samples of Ajmer district,Rajasthan

The natural abundance of fluoride in soils of the Ajmer distict, Rajasthan was examined. From undisturbed soil, the top 15 cm of the profile was examined and the soil split into fractions based on sand, silt and clay particle size. Clay contained a high amount of fluoride, whereas sand and silts are enriched with much less fluoride. The relation between the soil fractions in observed clay fraction fluoride content matched groundwater fluoride variation. However, the enrichment of fluoride material extracted from the largest soil fraction had considerably lower amounts of clay relative to that from the smaller fractions.     

Effects of pH and low molecular weight organic acids on competitive adsorption and desorption of cadmium and lead in paddy soils

The bioavailability and ultimate fate of heavy metals in the environment are controlled by adsorption-desorption process. Batch equilibrium experiments were performed to assess the effects of pH and low molecular weight organic acids (LMWOAs) on competitive adsorption and desorption of cadmium and lead in paddy soils from China. The results indicated that both soils exhibited greater sorption capacity for lead (Pb) (1.37-1.61-fold) than cadmium (Cd) as estimated by the maximum sorption parameter (Q) from the Langmuir equation. The Langmuir bonding energy coefficient (b) and distribution coefficient (K (d)) were greater for Pb than for Cd, furthermore, b (binary) and K (d) (single) were greater than b (single) and K (d binary), indicating that competition for sorption sites promote the retention of both metals on more specific sorption sites. Both Cd and Pb desorption as a function of solution pH was characteristic of "S" pattern. The presence of LMWOAs inhibited Cd or Pb desorption at the low concentrations (≤0.1 mmol L(-1)) but promoted Cd and Pb desorption at higher concentrations (≥0.5 mmol L(-1) for citric acid and ≥1 mmol L(-1) for malic and oxalic acid). The two paddy soils had a greater d (Cd) than d (Pb) in the presence of LMWOAs, indicating that Cd desorption was more affected by the presence of LMWOAs in binary metal system.     

Addressing the challenges of tetracycline analysis in soil: extraction, clean-up, and matrix effects in LC-MS

An optimized extraction and clean-up method for the analysis of chlortetracycline, doxycycline, oxytetracycline, and tetracycline antibiotics in soil is presented in this work. Soil extraction using different solvents was performed, but the use of a 50 : 50 (v/v) methanol : acetate buffer (pH 8) solvent mixture in a pressurized liquid extraction (PLE) system proved to give the best extraction efficiency and reproducibility. The effect of soil composition on the PLE extraction efficiency was also examined, and results indicated that recovery data for one soil is not necessarily consistent with other soil types containing different compositions of clay and organic matter content. The percent recoveries of the optimized PLE method varied between the soils and ranged from 22-99%, depending on soil type, and more specifically clay content. In addition, the extent of ionization suppression caused by co-extracted humic acids was examined in an ion trap mass spectrometer (MS), and a single quadrupole MS. It was found that under positive electrospray ionization, the single quadrupole MS was less susceptible to ionization suppression than the ion trap MS. Therefore, various sample clean-up procedures were evaluated to selectively reduce the amount of co-extracted humic acids in the soil extracts. The most effective clean-up was obtained from the use of StrataX sorbent in combination with a strong anion exchange cartridge.     

Adsorption of antimony(V) by floodplain soils, amorphous iron(III) hydroxide and humic acid

Antimony (Sb) emissions to the environment are increasing, and there is a dearth of knowledge regarding Sb fate and behaviour in natural systems. In particular, there is a lack of understanding of sorption of the oxidised Sb(V) species onto soils and soil phases. In this study sorption of Sb(V) by two organic rich soils with high levels of oxalate extractable Fe was examined over the pH range of 2.5-7. Furthermore, the sorption behaviour of Sb(V) was examined in two phases mimicking those dominant in the experimental soils, namely a solid humic acid and an amorphous Fe(OH)3, across the same pH range. Sorption of Sb by the soils and the humic acid fitted a Freundlich type isotherm, with the equation parameters reflecting changes in bonding affinity corresponding to pH changes. The soils sorbed >75% of the added Sb in all trials, and 80-100% at pH values less than approximately 6.5. The Fe(OH)3 retained >95% of the added Sb in all experiments. The humic acid sorbed up to 60% of the added Sb at acidic pH values, but sorption decreased to zero at higher pH values. Further adsorption studies are recommended, such as examining the effects of ion competition and changes in ionic strength.