乌鲁木齐市可吸入颗粒物(PM10)与总悬浮颗粒物(TSP)的相关性规律浅析

通过对乌鲁木齐市的PM10和TSP数据的对比分析，找出PM10在TSP中所占比率（分担率）在采暖季和非采暖季的变化范围，从而使过去采集的TSP数据与PM10数据有一定的可比性，保证监测数据的连续可比。     

空气中总悬浮颗粒物的X射线衍射定性分析研究

以天津市环境监测中心采集的空气中总悬浮颗粒物（ＴＳＰ）膜（９７１０１２号）为样品,使用日本理学Ｄ／ｍａｘＲＡＸ射线衍射仪对其进行化合物定性分析,并介绍样品的采集与制样方法、仪器测试条件。最后通过ＪＣＰＤＳＩＣＤＤ（国际粉末衍射数据中心）标准数据库检索出该样品所含的全部化合物     

合肥市春季大气PM10和PM2.5中碳组分的污染特征

2014年4月,应用热/光碳分析仪测定合肥市春季大气PM10和PM2.5中的有机碳（OC）、元素碳（EC）。结果显示,PM10、PM2.5的平均质量浓度分别为(124.0±34.3)μg/m3和(96.3±29.2) μg/m3,PM10中OC、EC的平均质量浓度分别为(15.1±5.5)μg/m3和(6.0±2.1) μg/m3,PM2.5中OC、EC的平均质量浓度分别为(12.1±3.5）μg/m3和(5.5±2.1) μg/m3。OC、EC在PM2.5中所占的比例均高于在PM10中的比例,说明合肥市春季PM2.5中碳的含量更高。通过分析8个碳组分及OC/EC比值,发现燃煤、机动车尾气和生物质燃烧是主要贡献源; OC易形成二次污染,EC排放以焦炭为主。     

北京市昌平区大气环境PM10中多环芳烃的含量及变化趋势

通过采集了2004～2006年北京市昌平区四个季节中大气PM10样品,采用超声抽提方法,使用GC/MS分析了该区PAHs含量和组成.结果显示,三年中四个季度的18种PAHs总量范围分别为21.64～656.39ng/m3、31.94～164.33ng/m3和7.294～209.3ng/m3,其中致癌性极强的苯并[a]芘含量范围为2.69～36.95 ng/m3、1.44～6.6ng/m3和0.256～8.625ng/m1,其变化趋势与PAHs总量有较好的相关性.PAHs的浓度是冬季＞秋季＞夏季＞春季,这与夏季时雨水冲刷和阳光照射强度大导致PAHs光解,冬季时燃煤排放大等影响因素有关.文章还使用多种方法判断昌平区大气PM10中的PAHs主要来源于燃煤和汽车尾气,其它污染源贡献较小.     

染料废水的X射线粉末衍射分析

染料生产过程的废水，其中含有致癌，致畸的有毒物质，通常需经生化处理后才排放，但生化处理并不能使其毒性消除骀尽，所以对处理后排放废水的进一步分析是当今环保分析中的一个重要课题，分光光度法，高压液相色谱及色－质联用仪是作微量分析的常用方法，但难以分析难挥发物和悬浮物，我们尝试用Ｘ射线粉末衍射分析法对分离废水得到的固态难挥发物作了分析，证明此法准确，快捷，可推广，但对胶状物或含量过低的物质则不适用。     

淮南市大气PM_(10)中多环芳烃污染特征的研究

对2008年05至11月淮南市5个采样点大气可吸入颗粒物(PM10)样品进行分析,总结了研究区内PM10及其中16种PAHs的浓度特征、季节变化规律和来源解析。研究区内16种PAHs浓度总和的范围在15.20~111.58ng.m-3之间,平均值为40.40ng.m-3,中位数为33.34ng.m-3。PAHs总量的季节变化与采样时环境温度显示出较好的负相关性,即秋季>春季>夏季;运用多环芳烃比值综合判断,淮南市大气PM10中PAHs主要以燃煤和机动车尾气混合来源为主,石油源和木材燃烧来源的贡献较小。     

乌鲁木齐市冬季大气颗粒物PM_(10) 和PM_(2.5)污染水平及相关性研究

为研究乌鲁木齐市冬季采暖期间大气颗粒物污染特征,通过采样和在线监测二种手段分析了2015年1~2月大气颗粒物样品,采用重量法分析颗粒物质量浓度,并对其相关性进行分析。结果表明:依据《环境空气质量标准》(GB 3095-2012),采样期间乌鲁木齐市大气PM_(10) 和PM_(2.5)的日均质量浓度均超过了国家二级标准,颗粒物污染严重;PM_(10) 和PM_(2.5)存在显著相关性,PM_(2.5)和PM_(10) 浓度的比值均大于0.5,采暖期PM2.5对乌鲁木齐市大气颗粒物贡献显著。     

合肥市春季大气PM10和PM2.5中碳组分的污染特征

选取桂林市5个代表性监测点,采用单颗粒气溶胶飞行时间质谱仪在线分析该市夏季大气PM2.5的化学组成及化学成分分布。结果表明： 5个监测点,＞80%的PM2.5分布在0.2 μm～1.0 μm的小粒径范围,＜20%的PM2.5分布在1.0 μm～2.5 μm大粒径范围; 大气PM2.5中离子成分包含Na+、K+、NH+4、C2H3+/Al+、Fe+、HSO-4、NO-3、NO-2、CNO-、CN-、SO-3、O-和元素碳离子; PM2.5中离子按成分特征可分为元素碳、有机碳、元素碳有机碳混合颗粒、富锰颗粒、富铁颗粒、富钾颗粒、矿物质、左旋葡聚糖以及其他金属等9类,各监测点元素碳占比均超过50%; 元素碳与硫酸盐、铵盐、硝酸盐发生内混合的程度极高,其中各监测点元素碳与硫酸盐混合程度最高,均达到90%左右。     

β射线衰减法与和微量振荡天平法测定PM10的比较

对现场监测环境空气中PM10的两种测定方法－β射线衰减法和微量振荡天平法的测量作了对比实验。实验表明，两种测定方法的结果具有一致性、相关性和可比性，能用回归直线方程来描述两者之间的关系。β射线衰减法的测定结果平均高于微量振荡天平法15.8%，它们之间平均偏差为7．5％。微量振荡天平法在现场测定中受干扰物和不确定因素的影响较少，其测量准确性优于β射线衰减法。两种监测仪的运行费用大致相同，维护量和故障率均较低。     

淮安市区大气中颗粒物PM_(10)、PM_(2.5)污染水平

通过对淮安市大气颗粒物中PM10、PM2．5的监测与污染水平分析,得出了淮安市区PM10与PM2．5浓度呈冬秋季高,夏春季低的特征。PM2.5和PM10的比值范围在0．62～0．65之间,即PM2．5在PM10以下颗粒物中所占比例大约为63％。     

澳门地区PM_(10)粒度分布的分形特征研究

采集澳门地区不同区域大气PM10样品,根据单颗粒图像分析方法分析了PM10的粒径分布,计算了各采样点PM10粒度分布的分形维数,分析讨论了PM10粒度分布分形维数的变化与粒度分布的关系,分析了粒度分布分形维数表征的澳门大气PM10不同采样点、不同季节的粒度整体分布及其影响因素之间的关系。结果表明,澳门地区PM10粒度分布的分形维数在2.05~3.95之间,夏季PM10的粒度分布分形维数(2.88)大于冬季(2.63),表明夏季PM10的粒度普遍较冬季的细。同一季节不同区域大气PM10的粒度也有较大变化,夏季时,澳门岛的总体颗粒物、矿物颗粒和烟尘颗粒物的分形维数较氹仔岛的偏大,即澳门岛的颗粒物比氹仔岛偏细,而冬季则相反,冬季时,澳门岛的总体颗粒物、矿物颗粒和烟尘颗粒物的分形维数较氹仔岛的偏小。     

天津市开放源可吸入颗粒物污染问题分析

通过高斯面源反演的计算方法对天津市扬尘污染源进行反演计算,建立开放源可吸入颗粒物污染源强数据库,系统分析了城市扬尘污染问题。数值试验模拟结果表明,扬尘控制措施与环境质量呈现很好的线性相关关系,通过模拟2004年天津市建筑施工扬尘对城市可吸入颗粒物污染贡献,提出扬尘污染问题解决方案。     

Exploring data quality for some inorganic and organic constituents of inhalable particulate matter (PM10)

Quality assurance (QA) assessments of air pollution data sets provide a basis for evaluating the significance of various substances in the atmosphere. For non-criteria pollutants, QA results are seldom reported in the technical literature and are often difficult to estimate. The present report provides a summary of QA results such as recovery, precision and accuracy data. Of the six trace elements and nine organic constituents compared in detail, recoveries, laboratory precision and laboratory accuracy values were 100%, ±3% to ±19% and-2 to-13% for the former group and 69% to 98%, ±7% to 23% and-15 to-34% for the later group. System precision varied from ±22% to ±47% for the trace elements and ±42% to ±83% for the organic constituents. Limitations in the interpretation of non-criteria particulate-phase pollutant data bases are discussed with some emphasis placed on receptor-modelling and risk assessment applications. Finally, the relevance of NBS certified materials for QA estimates in non-criteria air pollutant studies is also reviewed.     

中国4城市空气颗粒物元素的因子分析

因子分析在研究空气颗粒物来源上得到了广泛的应用。本文应用最大方差旋转因子分析法对中国4城市空气中粗、细颗粒物元素的来源进行了分析。结果指出粗、细颗粒物因子大致可分为土壤源因子和工业污染源因子两大类。粗颗粒物主要来自土壤源,细颗粒物主要来自工业污染源,并指出土壤源因子对粗颗粒物的贡献大于对细颗粒物的贡献。     

杭州市西湖风景区微粒的变化特点

分析了2001年6月至2002年5月的微粒资料(包括粗微粒和细微粒资料),结果表明,西湖风景区环境空气中存在一定的微粒污染,与机动车尾气大量排放有关,细微粒在微粒中所占的比例变化较大,且具有比较明显的季节变化。在冬季由于局地条件、沙尘暴影响,空气质量较差。春节期间烟花爆竹大量燃放对空气质量的影响很大。     

广州大型购物中心室内空气中PM10、CO和CO2的分布和来源特征

利用便携式测量仪,对广州市大型购物中心室内空气中的PM10、CO和CO2等进行了现场测定.结果表明,室内CO2和PM10浓度偏高.CO2全部超出了我国的室内空气标准,PM10全部超出了国家年平均标准,大部分超出了日平均标准.本文同时对购物中心内不同场所CO、CO2和PM10的浓度水平变化和来源特征进行了分析.     

Evaluation of levels, sources and distribution of toxic elements in PM10 in a suburban industrial region, Rio de Janeiro, Brazil

The Oswaldo Cruz Foundation Campus (FIOCRUZ), in a suburban region of the city of Rio de Janeiro, was selected as a case study to assess the pollution released from vehicle and industrial facilities in Basin III, the most polluted area of the city. Concentrations of particulate matter (PM10) and trace metals in airborne particles were determined in an intensive field campaign. The samplings were performed every six days for 24 h periods, using a PM10 high volume sampler, from September 2004 to August 2005. PM10 mass concentrations were determined gravimetrically and the metals by ICP-OES. For PM10, the arithmetic mean for the period is 169 ± 42 μg m⁻³ which is 3.4 times the national recommended standard of 50 μg m⁻³. Additionally, 51% of the samplings exceeded the recommended 24 h limit of 150 μg m⁻³. Ca, Mg, Fe, Zn and Al were the metals that presented the higher concentrations. The correlation matrix gave two main clusters and three significant principal components (PC). Both PC1 and PC2 are associated to crustal, vehicular and industrial emissions while PC3 is mainly associated to geological material. Enrichment factors for Zn, Cu, Cd and Pb indicate that for these elements, anthropic sources prevail over natural inputs. PM10 levels showed a good correlation with hospital admissions for respiratory diseases in children and elderly people.     

Characterisation of particulate matter emissions from the Zimbabwe Mining and Smelting Company (ZIMASCO) Kwekwe Division (Zimbabwe): a ferrochrome smelter

Particulate matter emissions from stack number 2 of a majorferrochrome smelter, Zimbabwe Mining and Smelting Company(ZIMASCO) were characterized and the rates at which the elementsCr, Fe, Cu and Zn and total ferrochrome dust are emitted into theatmosphere were determined. The extent of soil contamination bythe dust deposited around the smelter in the generally prevailingsoutheasterly wind direction around the smelter was carried out.The highest concentrations of Cr and Fe occurred in the fineparticulates of sizes less than 59 m whilst that of Cu and Znoccurred in the coarse particulates of size range 70-100 m.The emission rates from stack 2 were; total ferrochromeparticulates 62.17 kg h^-1, Cr 6.217 kg h^-1, Fe 2.423 kg h^-1, Zn42 mg h^-1 and 6 mg h^-1 for Cu. Particulate matter was emitted at arate of 289 mg m^-3 from stack number 2. This value exceeds thelegal limit of 200 mg m^-3. Chromium and iron are the metalsin the largest amounts. The particles that constitute the largestproportion of the dust were in the range of 58-107.5 m. Thisis a characteristic feature of the particulate matter emissionsfrom ZIMASCO. Soils in the downwind direction from the smelterwere polluted with Cr up to a distance of about 700 m outward fromthe perimeter of the boundary of the smelter.