Microwave inactivation of Bacillus atrophaeus spores in healthcare waste

Public healthcare wastes from the region of Ribeirão Preto, Brazil, pre-sterilized in an autoclave, were inoculated with spores of Bacillus atrophaeus for microwave processing on a laboratory scale. The influence of waste moisture (40%, 50% and 60% wet basis), presence of surfactant, power per unit mass of waste (100, 150 and 200 W/kg) and radiation exposure time (from 5 to 40 min) on the heating curves was investigated. The most favorable conditions for waste heating with respect to moisture and use of surfactant were then applied in an experimental analysis of the degree of inactivation of B. atrophaeus spores as a function of time and power per unit mass of waste. Based on Chick’s and Arrhenius laws, the experimental results were adjusted by the least squares method to determine the activation energies (9203–5782 J/mol) and the Arrhenius pre-exponential factor (0.23 min^?1). The kinetic parameters thus obtained enabled us to predict the degree of inactivation achieved for B. atrophaeus spores in typical healthcare waste. The activation energy was found to decrease as the power per waste mass increased, leading to the conclusion that, in addition to the thermal effect on the inactivation of B. atrophaeus spores, there was an effect inherent to radiation.     

Report: Healthcare waste characterization in Chittagong Medical College Hospital, Bangladesh

Healthcare waste management (HCWM) options are inconsistent in Bangladesh. One of the first critical steps in the process of developing a reliable waste management plan requires a comprehensive understanding of the quantities and characteristics of the waste that needs to be managed. This study took into consideration both the quantity and quality of the generated waste to determine the generation rates and physical properties of healthcare waste (HCW) in Chittagong Medical College Hospital (CMCH) and also to estimate the amount of infectious and non-infectious waste generated in different wards. CMCH, the second largest hospital in Bangladesh, comprises 34 wards, 12 of which were selected randomly. Waste materials were collected from these wards and then segregated and weighed. Waste generation per day was found to be 73.22 kg/ward, 1.28 kg/bed and 0.57 kg/patient. A total of 2490 kg of HCW was produced each day in CMCH (37% being infectious and the rest being non-infectious waste). Infectious waste was 27.07 kg per ward, 0.47 kg per bed and 0.21 kg per patient and the non-infectious waste was 46.15 kg per ward, 0.81 kg per bed and 0.36 kg per patient per day. HCW comprised eight categories of waste materials with vegetable/food waste being the largest component (50.21%) and varied significantly (P < 0.05) among the 12 different wards studied. The greatest amount of HCW was recorded (154 kg) in Orthopaedics followed by 96.66 kg in the Medicine Unit-3 and the smallest amount was recorded in Casualty (8.79 kg). The amount of HCW was positively correlated with the number of occupied beds (rxy = 0.79, P < 0.01). There is no structured form of medical waste treatment in CMCH and most waste materials are dumped in open areas for natural degradation or re-sold by scavengers. It is essential to develop a national policy and implement a comprehensive action plan for HCWM that will provide environmentally sound technological measures to improve HCWM in Bangladesh.     

Municipal solid waste management in Lahore City District,Pakistan

This study deals with generation, composition, collection, transportation, and disposal, as well as the present cost of the waste management on the basis of 60% collection of the total waste and the cost of proposed improved system of management on the basis of 100% waste collection using the IWM-2 LCI model. A GIS map of Data Ganj Bakhsh Town (DGBT) of Lahore City District showing communal storage facilities is also provided. DGBT has a population of 1,624,169 living in 232,024 dwellings. The total waste generated per year is 500,000 tons, or 0.84/kg/cap/day. Presently 60% of the MSW is collected and disposed in open dumps, while 40% is not collected and lies along roadsides, streets railway lines, depressions, vacant plots, drains, storm drains and open sewers. In DGBT, 129 containers of 5-m³ capacity, 120 containers of 10-m³ capacity and 380 skips of 2.5-m³ capacity are placed for waste collection. The overall collection and disposal cost of the MSW of DGBT is $3,177,900/yr, which is $10.29/ton. Modeling was conducted using the IWM-2 model for improved collection and disposal on the basis of 100% service, compared to the current 60% service. The modelled cost is $8.3/per ton, which is 20% less than the present cost, but the overall cost of 100% collection and disposal increases to $4,155,737/yr.     

A METHODOLOGY FOR QUANTIFYING THE VOLUME OF CONSTRUCTION WASTE

Estimates for construction waste generation are often based onper capitamultipliers in much the same way as municipal solid waste estimates. This has lead to estimation rates with more than 10-fold variation and little confidence in the resulting estimates. A methodology is offered in this paper that bases construction waste estimates on the financial value of building permits for a variety of types of construction projects. In this way, estimates reflect actual construction activity more closely and are based on a detailed and widely available database from the U.S. Census Bureau. A case study estimating gypsum wallboard waste generation for a region of the United States is described. The case study results were used in the decision-making process by a wallboard manufacturing plant interested in the development of a regional gypsum wallboard recycling programme.     

Environmental assessment of alternative municipal solid waste management strategies. A Spanish case study

The aim of this study is to compare, from an environmental point of view, different alternatives for the management of municipal solid waste generated in the town of Castellón de la Plana (Spain). This town currently produces 207 ton of waste per day and the waste management system employed today involves the collection of paper/cardboard, glass and light packaging from materials banks and of rest waste at street-side containers.The proposed alternative scenarios were based on a combination of the following elements: selective collection targets to be accomplished by the year 2015 as specified in the Spanish National Waste Plan (assuming they are reached to an extent of 50% and 100%), different collection models implemented nationally, and diverse treatments of both the separated biodegradable fraction and the rest waste to be disposed of on landfills.This resulted in 24 scenarios, whose environmental behaviour was studied by applying the life cycle assessment methodology. In accordance with the ISO 14040-44 (2006) standard, an inventory model was developed for the following stages of the waste management life cycle: pre-collection (bags and containers), collection, transport, pre-treatment (waste separation) and treatment/disposal (recycling, composting, biogasification + composting, landfill with/without energy recovery). Environmental indicators were obtained for different impact categories, which made it possible to identify the key variables in the waste management system and the scenario that offers the best environmental behaviour. Finally, a sensitivity analysis was used to test some of the assumptions made in the initial life cycle inventory model.     

Bridging legal and economic perspectives on interstate municipal solid waste disposal in the US

Managing municipal solid waste (MSW) within and across regions is a complex public policy problem. One challenge regards conceptualizing precisely what commodity is to be managed across space and time. The US Supreme Court view is that waste disposal is the article of commerce per se. Some justices, however, have argued that while waste disposal is the article of commerce, its interstate flow could be impeded by states on the grounds that they have the authority to regulate natural resource quality within their boundaries. The argument in this paper is that adopting the economic theory view of the article of commerce as landfill space brings the majority and dissenting US Supreme Court views—and the resulting sides of the public policy dispute—into closer alignment. We discuss waste management policy tools that emerge from this closer alignment that are more likely to both withstand judicial scrutiny and achieve economic efficiency.     

Occurrence of enteric pathogens in composted domestic solid waste containing disposable diapers

Information has not been previously available on the occurrence of enteric pathogenic viruses and protozoan parasites in composted municipal domestic solid waste. A potential source of these pathogens in domestic solid waste is disposal diapers. The occurrence of enteroviruses, Giardia cysts, Cryptosporidium oocysts and Salmonella were determined in municipal composted domestic solid waste, and solid waste to which extra diapers had been added to increase their concentration 2–4 fold (6.6–7.7% by weight) above that found normally in municipal solid waste before composting. The compost was tested at various periods of time during aging (101–203 days). No enteroviruses or protozoan cysts or oocysts were detected in any of the samples collected during this period. One sample out of 19 collected (after 175 days aging) was positive for Salmonella. These results suggest that enteric pathogens were destroyed during the composting process, or were present in numbers below the detection method (i.e. one organism per 40–50g of compost) used in this study.     

A novel methodology to estimate the evolution of construction waste in construction sites

This paper focuses on the accumulation of construction waste generated throughout the erection of new residential buildings. A special methodology was developed in order to provide a model that will predict the flow of construction waste. The amount of waste and its constituents, produced on 10 relatively large construction sites (7000-32,000 m² of built area) was monitored periodically for a limited time. A model that predicts the accumulation of construction waste was developed based on these field observations. According to the model, waste accumulates in an exponential manner, i.e. smaller amounts are generated during the early stages of construction and increasing amounts are generated towards the end of the project. The total amount of waste from these sites was estimated at 0.2 m³ per 1 m² floor area. A good correlation was found between the model predictions and actual data from the field survey.     

Attitudes and behaviour towards waste management in the Dublin,Ireland region

The hypothesis of this research was that attitudes about the management of biodegradable municipal waste (BMW) are spatially variable, even within a city of modest (1.2 million) population. For a select number of representative electoral districts in the Dublin, Ireland region, residents were surveyed regarding attitudes towards waste management in general, and BMW management in particular. A total of 850 survey responses were collected. Door-to-door interviews produced 688 responses in the residential sector; these were supplemented by 162 responses to a web-based survey.The surveys revealed that the majority of households use local authority, rather than private, waste collection services (both are available). The majority of residents, regardless of the local authority in which they live, were satisfied with their waste management service. “Reducing the quantity of waste generated” was regarded the most important future issue for 28% of residential respondents. Statistical analyses of the survey responses showed that the local authority in which respondents resided significantly influenced most responses (including waste collection service used, waste service satisfaction and backyard composting activity). Many responses (including waste service satisfaction, waste management influences) were also significantly related to the respondents’ personal characteristics (e.g., education level, type of accommodation, age, etc.). These statistical results proved the hypothesis of the research and demonstrated that waste management initiatives designed for one area of the city (or, indeed, for uniform application to the city as a whole) could ignore the needs of other areas. The survey responses suggest that targeted intervention strategies would lead to improved diversion rates of BMW from landfill, a requirement of the Landfill Directive 1999/31/EC.     

Household solid waste characteristics and management in Chittagong, Bangladesh

Solid waste management (SWM) is a multidimensional challenge faced by urban authorities, especially in developing countries like Bangladesh. We investigated per capita waste generation by residents, its composition, and the households' attitudes towards waste management at Rahman Nagar Residential Area, Chittagong, Bangladesh. The study involved a structured questionnaire and encompassed 75 households from five different socioeconomic groups (SEGs): low (LSEG), lower middle (LMSEG), middle (MSEG), upper middle (UMSEG) and high (HSEG). Wastes, collected from all of the groups of households, were segregated and weighed. Waste generation was 1.3kg/household/day and 0.25kg/person/day. Household solid waste (HSW) was comprised of nine categories of wastes with vegetable/food waste being the largest component (62%). Vegetable/food waste generation increased from the HSEG (47%) to the LSEG (88%). By weight, 66% of the waste was compostable in nature. The generation of HSW was positively correlated with family size (r(xy)=0.236, p<0.05), education level (r(xy)=0.244, p<0.05) and monthly income (r(xy)=0.671, p<0.01) of the households. Municipal authorities are usually the responsible agencies for solid waste collection and disposal, but the magnitude of the problem is well beyond the ability of any municipal government to tackle. Hence dwellers were found to take the service from the local waste management initiative. Of the respondents, an impressive 44% were willing to pay US$0.3 to US$0.4 per month to waste collectors and it is recommended that service charge be based on the volume of waste generated by households. Almost a quarter (22.7%) of the respondents preferred 12-1pm as the time period for their waste to be collected. This study adequately shows that household solid waste can be converted from burden to resource through segregation at the source, since people are aware of their role in this direction provided a mechanism to assist them in this pursuit exists and the burden is distributed according to the amount of waste generated.     

GHG emission factors developed for the collection,transport and landfilling of municipal waste in South African municipalities

Greenhouse gas (GHG) emission factors are used with increased frequency for the accounting and reporting of GHG from waste management. However, these factors have been calculated for developed countries of the Northern Hemisphere and are lacking for developing countries. This paper shows how such factors have been developed for the collection, transport and landfilling of municipal waste in South Africa. As such it presents a model on how international results and methodology can be adapted and used to calculate country-specific GHG emission factors from waste. For the collection and transport of municipal waste in South Africa, the average diesel consumption is around 5 dm³ (litres) per tonne of wet waste and the associated GHG emissions are about 15 kg CO₂ equivalents (CO₂ e). Depending on the type of landfill, the GHG emissions from the landfilling of waste have been calculated to range from ?145 to 1016 kg CO₂ e per tonne of wet waste, when taking into account carbon storage, and from 441 to 2532 kg CO₂ e per tonne of wet waste, when carbon storage is left out. The highest emission factor per unit of wet waste is for landfill sites without landfill gas collection and these are the dominant waste disposal facilities in South Africa. However, cash strapped municipalities in Africa and the developing world will not be able to significantly upgrade these sites and reduce their GHG burdens if there is no equivalent replacement of the Clean Development Mechanism (CDM) resulting from the Kyoto agreement. Other low cost avenues need to be investigated to suit local conditions, in particular landfill covers which enhance methane oxidation.     

A total quality management approach to healthcare waste management in Namazi Hospital,Iran

BackgroundHealthcare waste comprises all wastes generated at healthcare facilities, medical research centers and laboratories. Although 75–90% of these wastes are classified as household waste posing no potential risk, 10–25% are deemed to be hazardous, representing a potential threat to healthcare workers, patients, the environment and even the general population, if not disposed of appropriately. If hazardous and non-hazardous waste is mixed and not segregated prior to disposal, costs will increase substantially. Medical waste management is a worldwide issue. In Iran, the majority of problems are associated with an exponential growth in the healthcare sector together with low- or non-compliance with guidelines and recommendations. The aim of this study was to reduce the amounts of infectious waste by clear definition and segregation of waste at the production site in Namazi Hospital in Shiraz, Iran.Materials and methodsNamazi Hospital was selected as a study site with an aim to achieving a significant decrease in infectious waste and implementing a total quality management (TQM) method. Infectious and non-infectious waste was weighed at 29 admission wards over a 1-month period.ResultsBefore the introduction of the new guidelines and the new waste management concept, weight of total waste was 6.67 kg per occupied bed per day (kg/occupied bed/day), of which 73% was infectious and 27% non-infectious waste. After intervention, total waste was reduced to 5.92 kg/occupied bed/day, of which infectious waste represented 61% and non-infectious waste 30%. The implementation of a new waste management concept achieved a 26% reduction in infectious waste.ConclusionA structured waste management concept together with clear definitions and staff training will result in waste reduction, consequently leading to decreased expenditure in healthcare settings.     

A Baumol–Oates approach to solid waste taxation

A national Baumol–Oates tax on waste in Denmark helped achieve a reduction of 26% in net solid waste from 1987 to 1998. The tax, which is levied per ton of waste, was particularly effective as regards the heavier waste streams such as construction waste and garden waste. When it comes to industrial and commercial waste, there are indications that the waste tax is not sufficiently significant to induce changes in behavior, and that except for very waste-intensive enterprises, companies do not seem to be very price sensitive. For household waste, the impact of the tax can be improved where tariffs for garbage collection are weight based, rather than per unit. However, the waste sector is an area in which the price signals are modified and filtered by institutionalized practices in municipal administration, and in which true-cost pricing is not easy to achieve. Hence, the rational choice assumption of environmental economics needs to be supplemented by an institutional dimension to interpret responses to environmental taxes correctly. Received: July 13, 2001 / Accepted: October 2, 2001     

Comparison of different liquid anaerobic digestion effluents as inocula and nitrogen sources for solid-state batch anaerobic digestion of corn stover

Effluents from three liquid anaerobic digesters, fed with municipal sewage sludge, food waste, or dairy waste, were evaluated as inocula and nitrogen sources for solid-state batch anaerobic digestion of corn stover in mesophilic reactors. Three feedstock-to-effluent (F/E) ratios (i.e., 2, 4, and 6) were tested for each effluent. At an F/E ratio of 2, the reactor inoculated by dairy waste effluent achieved the highest methane yield of 238.5 L/kgVS_feed, while at an F/E ratio of 4, the reactor inoculated by food waste effluent achieved the highest methane yield of 199.6 L/kgVS_feed. The microbial population and chemical composition of the three effluents were substantially different. Food waste effluent had the largest population of acetoclastic methanogens, while dairy waste effluent had the largest populations of cellulolytic and xylanolytic bacteria. Dairy waste also had the highest C/N ratio of 8.5 and the highest alkalinity of 19.3 g CaCO₃/kg. The performance of solid-state batch anaerobic digestion reactors was closely related to the microbial status in the liquid anaerobic digestion effluents.     

Waste management activities and carbon emissions in Africa

This paper summarizes research into waste management activities and carbon emissions from territories in sub-Saharan Africa with the main objective of quantifying emission reductions (ERs) that can be gained through viable improvements to waste management in Africa. It demonstrates that data on waste and carbon emissions is poor and generally inadequate for prediction models. The paper shows that the amount of waste produced and its composition are linked to national Gross Domestic Product (GDP). Waste production per person is around half that in developed countries with a mean around 230 kg/hd/yr. Sub-Saharan territories produce waste with a biogenic carbon content of around 56% (+/−25%), which is approximately 40% greater than developed countries. This waste is disposed in uncontrolled dumps that produce large amounts of methane gas. Greenhouse gas (GHG) emissions from waste will rise with increasing urbanization and can only be controlled through funding mechanisms from developed countries.     

Municipal solid waste generation in municipalities: quantifying impacts of household structure, commercial waste and domestic fuel

Waste management planning requires reliable data concerning waste generation, influencing factors on waste generation and forecasts of waste quantities based on facts. This paper aims at identifying and quantifying differences between different municipalities' municipal solid waste (MSW) collection quantities based on data from waste management and on socio-economic indicators. A large set of 116 indicators from 542 municipalities in the Province of Styria was investigated. The resulting regression model included municipal tax revenue per capita, household size and the percentage of buildings with solid fuel heating systems. The model explains 74.3% of the MSW variation and the model assumptions are met. Other factors such as tourism, home composting or age distribution of the population did not significantly improve the model. According to the model, 21% of MSW collected in Styria was commercial waste and 18% of the generated MSW was burned in domestic heating systems. While the percentage of commercial waste is consistent with literature data, practically no literature data are available for the quantity of MSW burned, which seems to be overestimated by the model. The resulting regression model was used as basis for a waste prognosis model (Beigl and Lebersorger, in preparation).     

Mathematical modeling to predict residential solid waste generation

One of the challenges faced by waste management authorities is determining the amount of waste generated by households in order to establish waste management systems, as well as trying to charge rates compatible with the principle applied worldwide, and design a fair payment system for households according to the amount of residential solid waste (RSW) they generate. The goal of this research work was to establish mathematical models that correlate the generation of RSW per capita to the following variables: education, income per household, and number of residents. This work was based on data from a study on generation, quantification and composition of residential waste in a Mexican city in three stages. In order to define prediction models, five variables were identified and included in the model. For each waste sampling stage a different mathematical model was developed, in order to find the model that showed the best linear relation to predict residential solid waste generation. Later on, models to explore the combination of included variables and select those which showed a higher R(2) were established. The tests applied were normality, multicolinearity and heteroskedasticity. Another model, formulated with four variables, was generated and the Durban-Watson test was applied to it. Finally, a general mathematical model is proposed to predict residential waste generation, which accounts for 51% of the total.     

BMP estimation of landfilled municipal solid waste by multivariate statistical methods using specific waste parameters: case study of a sanitary landfill in Turkey

The main objective of this study was to determine whether methane potential of waste could be estimated more easily by a limited number of waste characterization variables. 36 samples were collected from 12 locations and 3 waste depths in order to represent almost all waste ages at the landfill. Actual remaining methane potential of all samples was determined by the biochemical methane potential (BMP) tests. The cumulative methane production of closed landfill (cLF) samples reached 75–125 mL at the end of experiment duration, while the samples from active landfill (aLF) produced in average 216–266 mL methane. The average experimental k and L ₀ values of cLF and aLF were determined by non-linear regression using BMP data with first-order kinetic equation as 0.0269 day^?1–30.38 mL/g dry MSW and 0.0125 day^?1–102.1 mL/g dry MSW, respectively. The principal component analysis (PCA) was applied to analyze the results for cLF and aLF along with BMP results. Three PCs for the data set were extracted explaining 72.34 % variability. The best MLR model for BMP prediction was determined for seven variables (pH–Cl–TKN–NH4–TOC–LOI–Ca). R ² and Adj. R ² values of this best model were determined as 80.4 and 75.3 %, respectively.     

A technical, economic, and environmental analysis of energy production from newspaper in Ireland

The production of newspaper corresponds to 37 kg per person per annum in Ireland. Newspaper becomes a waste product in a short period of time; only 13% of domestic waste paper is recycled (data on newspaper is not available). Four scenarios, which generate energy from newspaper, are analysed. These scenarios may be summarised as follows: lignocellulosic biomass conversion to ethanol (transport fuel); co-digestion with the organic fraction of municipal solid waste and production of CH4-enriched biogas (transport fuel); co-firing with the residue of municipal solid waste in an incinerator; and gasification of newspaper as a sole fuel. Two of the scenarios involve transport fuel production; two involve the production of electricity and heat. Two of the scenarios involve newspaper as the sole ingredient; two involve co- utilisation of newspaper with another waste stream. Assuming no economic market for heat, then only the transport scenarios have the potential to be economic; indeed the biogas scenario is shown to be extremely competitive generating a potential profit of euro 227/t newspaper. A greenhouse-gas analysis indicates that the biogas scenario generated the best net greenhouse-gas savings. However when a market for heat is available, gasification was shown to be most advantageous.     

Part II – The effect of data on waste behaviour: The South African waste information system

Combining the process of learning and the theory of planned behaviour into a new theoretical framework provides an opportunity to explore the impact of data on waste behaviour, and consequently on waste management, in South Africa. Fitting the data to the theoretical framework shows that there are only three constructs which have a significant effect on behaviour, viz experience, knowledge, and perceived behavioural control (PBC). Knowledge has a significant influence on all three of the antecedents to behavioural intention (attitude, subjective norm and PBC). However, it is PBC, and not intention, that has the greatest influence on waste behaviour. While respondents may have an intention to act, this intention does not always manifest as actual waste behaviour, suggesting limited volitional control. The theoretical framework accounts for 53.7% of the variance in behaviour, suggesting significant external influences on behaviour not accounted for in the framework. While the theoretical model remains the same, respondents in public and private organisations represent two statistically significant sub-groups in the data set. The theoretical framework accounts for 47.8% of the variance in behaviour of respondents in public waste organisations and 57.6% of the variance in behaviour of respondents in private organisations. The results suggest that respondents in public and private waste organisations are subject to different structural forces that shape knowledge, intention, and resultant waste behaviour.