Nanomaterials photocatalytic activities for waste water treatment: a review

Water is necessary for the survival of life on Earth. A wide range of pollutants has contaminated water resources in the last few decades. The presence of contaminants incredibly different dyes in waste, potable, and surface water is hazardous to environmental and human health. Different types of dyes are the principal contaminants in water that need sudden attention because of their widespread domestic and industrial use. The toxic effects of these dyes and their ability to resist traditional water treatment procedures have inspired the researcher to develop an eco-friendly method that could effectively and efficiently degrade these toxic contaminants. Here, in this review, we explored the effective and economical methods of metal-based nanomaterials photocatalytic degradation for successfully removing dyes from wastewater. This study provides a tool for protecting the environment and human health. In addition, the insights into the transformation of solar energy for photocatalytic reduction of toxic metal ions and photocatalytic degradation of dyes contaminated wastewater will open a gate for water treatment research. The mechanism of photocatalytic degradation and the parameters that affect the photocatalytic activities of various photocatalysts have also been reported.

     

Flotation in water and wastewater treatment and reuse: recent trends in Brazil

This paper summarises environmental applications of conventional and unconventional flotation to remove pollutants from waters. Emphasis is given to the design features of innovative inline reactors, namely the Flocs Generator Reactor and Flocculation-Flotation, and their applications for the flocculation and flotation in solid-liquid separations involving water (and wastewater) treatment and reuse. Applications are shown in potable water clarification, treatment and water reuse from car washing units and in the treatment of acid mine drainage. Results show that these inline flocculation (or flotation) separators have a great potential for water/wastewater treatment and reuse, especially in applications requiring high rate solid-liquid separations.     

Transformation products of pharmaceuticals in surface waters and wastewater formed during photolysis and advanced oxidation processes - degradation, elucidation of byproducts and assessment of their biological potency

The significance of transformation products of pharmaceuticals resulting from the parent compounds during natural and technical photolytic processes and advanced oxidation processes has only recently started to attract the interest of the scientific community. Even though relevant studies have now started to produce important knowledge, still many gaps exist that hinder the in-depth and broad understanding of the extent of the potential problems stemming from the presence of such compounds in the environment and the applicability of such techniques for wastewater and potable water treatment. The great diversity of pharmaceutical compounds, the variety of processes and conditions applied by the various research groups active in the field, and the endless list of potential biological endpoints that could potentially be explored, coupled with the limitations related to the analytical capabilities presently available, are some of the crucial parameters that characterize this challenging research direction. This review paper tries to highlight some of the most relevant studies performed so far and to summarize the parameters that prevent scientists from reaching comprehensive conclusions in relation to the formation, fate, and effects of transformation products of pharmaceutical compounds during photo-driven and advanced oxidation processes.     

Perfluorochemicals in water reuse

Faced with freshwater shortages, water authorities are increasingly utilizing wastewater reclamation to augment supplies. However, concerns over emerging trace contaminants that persist through wastewater treatment need to be addressed to evaluate potential risks. In the present study, perfluorinated surfactant residues were characterized in recycled water from four California wastewater treatment plants that employ tertiary treatment and one that treats primary sewage in a wetland constructed for both treatment and wildlife habitat. Effluent concentrations were compared with surface and groundwater from a creek where recycled water was evaluated as a potential means to augment flow (Upper Silver and Coyote Creeks, San Jose, CA). In the recycled water, 90-470 ng/l perfluorochemicals were detected, predominantly perfluorooctanoate (PFOA; 10-190 ng/l) and perfluorooctanesulfonate (PFOS; 20-190 ng/l). No significant removal of perfluorochemicals was observed in the wetland (total concentration ranged 100-170ng/l across various treatment stages); in this case, 2-(N-ethylperfluorooctanesulfonamido) acetic acid (N-EtFOSAA), perfluorodecanesulfonate (PFDS), and PFOS were dominant. Though there is currently no wastewater discharge into the creeks, perfluorochemicals were found in the surface water and underlying groundwater at a total of 20-150 ng/l with PFOS and PFOA again making the largest contribution. With respect to ecotoxicological effects, perfluorochemical release via recycled water into sensitive ecosystems requires evaluation.     

Applying Kohonen self-organizing map as a software sensor to predict biochemical oxygen demand.

The 5 days at 20 degrees C biochemical oxygen demand (BOD5) is an important parameter for monitoring organic pollution in water and assessing the biotreatability of wastewater. Moreover, BOD5 is used for wastewater treatment plant discharge consents and other water pollution control purposes. However, the traditional bioassay method for estimating the BOD5 involves the incubation of sample water for 5 days. It follows that BOD5 is not available for real-time decisionmaking and process control purposes. On the other hand, previous efforts to solve this problem by developing more rapid biosensors had limited success. This paper reports on the development of Kohonen self-organizing map (KSOM)-based software sensors for the rapid prediction of BOD5. The findings indicate that the KSOM-based BOD5 estimates were in good agreement with those measured using the conventional bioassay method. This offers significant potential for more timely intervention and cost savings during problem diagnosis in water and wastewater treatment processes.     

Performance improvement and advancement studies of mixed-mode solar thermal dryers: a review

Solar thermal dryers are solar-operated gadgets utilized to dehumidify various products, especially food items and rubber sheets. This article provides detailed design, parametric studies, and an in-depth review of mixed-mode solar dryers (MMSD) with a case study of fish drying near coastal lines. Due to several advantages compared to open sun drying and prominent performance index compared to indirect and direct type solar dryers, mixed-mode solar dryers have large adaptability on the field. Moreover, mixed-mode solar thermal dryers with different augmentations are reviewed, for instance, mixed-mode solar dryers with evacuated tube collectors, phase change materials, ultraviolet rays stabilized housing, and dehumidifiers. The case study of fish drying near the coastal line of Gujarat, India has been carried out to study the present scenario of the drying activities. Hence, the objective of this review is to identify the capable mixed-mode solar dryer with heat recovery systems. Substantial reviews within the article suggest an essential need to implement the hybrid mixed-mode solar dryer cum distiller technology for small-scale enterprises that can simultaneously provide potable water near coastal lines along with drying of fishes from the solar dryer. Furthermore, future research demands such hybrid mixed-mode solar drying systems that strongly fulfill the requirements of local communities near coastal lines involved in fish drying activities.

     

Oxidation-reduction potential changes in aeration tanks and microprofiles of activated sludge floc in medium- and low-strength wastewaters.

Real-time control of aeration tank operation is key to high-efficiency pollutant removal and energy savings. One of the aims of this study was to examine the potential for using redox potential (oxidation-reduction potential [ORP]) to indicate wastewater quality online in aeration tanks treating medium (chemical oxygen demand [COD] of 70 to 150 mg/L) and low (COD of 15 to 30 mg/L) pollutant-concentration wastewaters. The field-scale data provide a good relationship between ORP values and nutrient removal along the length of the aeration tanks. The ORP values increased dramatically as organic matter was removed along the aeration tanks, indicating the improvement of the bulk liquor redox status. Dissolved oxygen higher than 1.0 mg/L was necessary for good biodegradation and improvement of the liquid redox status. Nitrification occurred at higher ORP values (380 to 420 mV) than was the case for organic substrate oxidation (250 to 300 mV). The microprofiles obtained from microelectrode measurements substantiate the heterogeneity of the microbial processes inside activated sludge flocs. Because of microbial oxygen utilization, the aerobic region in the activated sludge floc was limited to the top layer (0.1 to 0.2 mm) of the activated sludge aggregate present in medium-strength wastewater, with an anoxic zone dominating inside the flocs. When dissolved oxygen in the bulk water was higher than 4.0 mg/L, the anoxic zone inside the floc disappeared. At low wastewater pollutant concentrations, the ORP and dissolved oxygen inside the activated sludge aggregates were higher than those from medium-strength wastewater. The prospect of using ORP as an online control approach for aeration tank operation and the potential reasons for activated sludge floc size varying with pollutant strengths are also discussed.     

A livelihood in a risky environment: Farmers’ preferences for irrigation with wastewater in Hyderabad,India

Most cities in developing countries fail to treat their wastewater comprehensively. Consequently, farmers downstream use poor-quality water for irrigation. This practice implies risks for farmers, consumers and the environment. Conversely, this water supply supports the livelihood of these farmers and other stakeholders along the value chains. Linking safer options for wastewater management with irrigation could therefore be a win–win solution: removing the risks for society and maintaining the benefits for farmers. However, in developing countries, the high investment costs for the required treatment are problematic and the willingness of farmers to pay for the water (cost recovery) is often questionable. Using a choice experiment, this paper gives insight into farmers’ preferences for wastewater use scenarios, quantifying their willingness to pay. The case study is Hyderabad, India. Farmers there prefer water treatment and are prepared to pay a surplus for this. Considering the cost-recovery challenge, this information could be valuable for planning small on site wastewater treatment systems.     

洗车废水处理技术现状与展望

洗车废水中含有泥砂、油乳化液、有机物及洗涤剂类污染物质。在分析中 ,对洗车废水的水质进行了分类 ,并针对不同的水质 ,对国内的大型洗车场的处理工艺和小型洗车行的洗车废水回用工艺进行了介绍和分析 ,对国外采用膜工艺处理洗车废水的相关研究也进行了简要的介绍 ,同时提出了洗车废水的污泥处理问题。从社会、经济效益来看 ,洗车废水回用是必然趋势。现行的洗车废水回用处理工艺回用率低、处理效果不理想 ,采用高效、简单、实用、经济的原则进行设计 ,满足社会对洗车水回用的需求是未来洗车废水处理技术发展的要求     

Characteristics and treatment of greywater—a review

Safe and sufficient quantity of water is necessary for a healthy growth of human beings. The gap between water demand and available water supply is increasing day by day. Proper sanitation, especially decentralized approach, can solve the problem of water supply and wastewater management and that can be done by reuse of greywater. Typically, from a household, greywater (GW) flow is around 65 % of the total wastewater flow. Further light greywater is around 50 % of the total GW. Hence, GW has a high potential for recycle and reuse. The aim of this article is to reveal the present state of art in GW treatment and to identify the further scope for research. Present article contains a review on per capita GW generation, GW characteristics, and its treatment. Around 22 treatment systems comprising different treatment processes are discussed in detail for removal efficiency of pollutants, effluent concentrations and their compliance with wastewater reuse guidelines and standards. Constructed wetland and filtration were found efficient in the removal of most of the reuse parameters compared to other technologies. Anaerobic followed by aerobic system with post-disinfection unit may be a sustainable option for GW treatment for reuse. There is a need to develop the technologies for GW treatment at household level to increase the reuse practises at grass root level. Further, there is need of development of flow diagram with different technologies by targeting the type of reuse (flushing, gardening, agriculture, etc.).     

Can radiation chemistry supply a highly efficient AO(R)P process for organics removal from drinking and waste water? A review

The increasing role of chemistry in industrial production and its direct and indirect impacts in everyday life create the need for continuous search and efficiency improvement of new methods for decomposition/removal of different classes of waterborne anthropogenic pollutants. This review paper addresses a highly promising class of water treatment solutions, aimed at tackling the pressing problem of emerging contaminants in natural and drinking waters and wastewater discharges. Radiation processing, a technology originating from radiation chemistry studies, has shown encouraging results in the treatment of (mainly) organic water pollution. Radiation (“high energy”) processing is an additive-free technology using short-lived reactive species formed by the radiolysis of water, both oxidative and reducing, to carry out decomposition of organic pollutants. The paper illustrates the basic principles of radiolytic treatment of organic pollutants in water and wastewaters and specifically of one of its most practical implementations (electron beam processing). Application examples, highlighting the technology’s strong points and operational conditions are described, and a discussion on the possible future of this technology follows.     

Use of naturally growing aquatic plants for wastewater purification.

This paper examines potential uses of naturally growing aquatic plants for wastewater purification. These plants enhance the removal of pollutants by consuming part of them in the form of plant nutrients. This applies to urban and agricultural wastewater, in particular, where treatment units of different sizes can be applied at the pollution source. The effectiveness of wastewater purification by different plants was tested on laboratory and pilot scales. The growth rate of the plants was related to the wastewater content in the water. Batch and semicontinuous experiments verified that the plants are capable of decreasing all tested indicators for water quality to levels that permit the use of the purified water for irrigation. This applies to biochemical oxygen demand (BOD), chemical oxygen demand, total suspended solids. pH, and turbidity. In specific cases, the turbidity reached the level of drinking water. Comparison of BOD concentrations with typical levels in water treatment facilities across the country indicates the effectiveness of water purification with plants. A major effect of treatment with plants was elimination of the disturbing smell from the wastewater. It is shown that mixtures of wastewater and polluted water from the Kishon River are amenable in varying degrees to treatment by the plants. The higher the wastewater content in the mixture, the more effective the treatment by the plants. In this context, a scheme for rehabilitation and restoration of the Kishon River is presented and technical and economical aspects of the purification technology are considered.     

A new systematic technique for retrofit of water network

This paper presents a new systematic technique for the retrofit of existing water network based on pinch analysis. This technique, which was applied on a paper mill, consists of three main steps: Network Diagnosis, Network Retrofit and Network Evolution. Network diagnosis step provides a good understanding of the existing water network through the use of a new tool called the Concentration Block Diagram (CBD). Next, modifications based on a set of pinch rules were performed on the existing water network to achieve the preliminary retrofit design. Finally, the preliminary retrofit design will go through an evolution to generate the final retrofit scheme. A paper making process case study was utilised to demonstrate the applicability of this new methodology. The results show that 55.5% of fresh water consumption and 65.7% of wastewater generation have been reduced, respectively, for the paper mill case study.     

Toward the reduction of water consumption in the vegetable-processing industry through membrane technology: case study of a carrot-processing plant

Environmental Science and Pollution Research - The food industry consumes large amounts of clean, potable water and in turn generates a significant amount of wastewater. In order to minimize water...     

Performance evaluation of a decentralized wastewater treatment system in India

A Decentralized Wastewater Treatment System (DEWATS) provides an economically feasible and efficient wastewater treatment solution especially in developing countries. It has an enormous potential for developing a sustainable environmental sanitation system. In this study, the treatment efficiency of eight DEWATS plants was evaluated in the state of Maharashtra, India, for their performance in terms of selected physico-chemical parameters of the wastewater. Although the efficiency of some of the plants was lower than that reported in literature, the effluent quality of all the plants was within the permissible discharge limits of the Central Pollution Control Board for all the parameters. Comprehensive assessment of Plant I was carried in terms of its technical and socio-economic aspects. Moreover, LCA tool has been utilized to evaluate the environmental impacts of the operation stage of DEWATS. The midpoint, CML 2001 (April 2015) methodology was adopted, in which 11 impact categories were considered. From the life cycle impact assessment and interpretation, the main impacts are identified as releases of COD, P-PO₄^3?, and N-NH₄⁺ to water bodies and disposal of sludge. Due to negligible energy consumption, the operation stage was found to be less damaging to the environment. It was concluded that DEWATS can be a good alternative for treating wastewater with negligible energy and chemical consumption.

     

活性炭纤维及其在水处理中的应用

介绍了活性炭纤维材料的发展历史、类别、结构性能、制备过程。活性炭纤维比普通活性炭性能优越，吸附量大，机械强度高，吸附、脱附速度快，正逐渐地被用于废水处理和饮用水的净化。其具体方法有常用的吸附法、电解法，以及尚在起步阶段的生物活性炭纤维法。     

Application of molecularly imprinted and non-imprinted polymers for removal of emerging contaminants in water and wastewater treatment: a review

Over the past decade, several studies have reported trace levels of endocrine disrupting compounds, pharmaceuticals, and personal care products in surface waters, drinking water, and wastewater effluents. There has also been an increased concern about the ecological and human health impact of these contaminants, and their removal from water and wastewater has become a priority. Traditional treatment processes are limited in their ability to remove emerging contaminants from water, and there is a need for new technologies that are effective and feasible. This paper presents a review on recent research results on molecularly imprinted (MIP) and non-imprinted (NIP) polymers and evaluates their potential as a treatment method for the removal of emerging contaminants from water and wastewater. It also discusses the relative benefits and limitations of using MIP or NIP for water and wastewater treatment. MIP, and in particular NIP, offer promising applications for wastewater treatment, but their toxicity and possible health effects should be carefully studied before they are considered for drinking water treatment. More research is also required to determine how best to incorporate MIP and NIP in treatment plants.     

The removal of microorganisms and organic micropollutants from wastewater during infiltration to aquifers after irrigation of farmland in the Tula Valley, Mexico

The Tula Valley receives untreated wastewater from Mexico City for agricultural irrigation, half of which infiltrates to aquifers from where drinking water is extracted. Samples of wastewater and infiltrated water from three areas of the valley were analyzed for microorganisms, organic micropollutants, and some basic parameters. Concentrations of microorganisms in the infiltrated water were generally very low but the incidence of fecal coliforms (present in 68% of samples), somatic bacteriophages (36%), Giardia spp. (14%), and helminth eggs (8%) suggested a health risk. Organic micropollutants, often present at high concentrations in the wastewater, were generally absent from the infiltrated water except carbamazepine which was in 55% of samples (up to 193 ng/L). There was no correlation between carbamazepine concentrations and the presence of microorganisms but highest concentrations of carbamazepine and boron coincided. A treatment such as nanofiltration would be necessary for the infiltrated water to be a safe potable supply.     

Comparison of environmental effects and resource consumption for different wastewater and organic waste management systems in a new city area in Sweden

An analysis of the environmental effects and resource consumption by four systems for management of wastewater and organic household waste in a new city area have been performed, as follows: (1) conventional system complemented with advanced sludge treatment for phosphorus recovery, (2) blackwater system with urine diversion and food waste disposers, (3) blackwater system with food waste disposers and reverse osmosis, and (4) local wastewater treatment plant with nutrient recovery by using reverse osmosis. Substance-flow analysis and energy/exergy calculations were performed by using the software tool URWARE/ORWARE. Emissions were calculated and classified based on the impact categories global warming potential, acidification, and eutrophication, according to ISO 14042 (2000). The analysis also included nutrient recovery (i.e., the potential to use nutrients as a fertilizer). Depending on which aspects are prioritized, different systems can be considered to be the most advantageous.