County‐Scale Rainwater Harvesting Feasibility in the United States: Climate,Collection Area,Density, and Reuse Considerations

Roof rainwater harvesting (RWH) has the potential to augment water supplies for urban and suburban uses throughout the United States (U.S.). Studies of the performance of RWH at the building and city scales in the U.S. are available, but a countrywide overview of the potential performance of RWH at the county scale has not been done before. Three approaches were taken: (1) assess the viability of RWH in terms of the rainfall that could be captured in relation to the water demand in each county (excluding agriculture), (2) evaluate the performance of a “typical” domestic RWH system across all counties with metrics related to its ability to supply the potable and nonpotable demand, and (3) evaluate the effect of adding a 50% rainwater reuse component to the analysis. We find RWH could be a viable supplemental water source in the U.S., particularly in counties of the Pacific Northwest, Central, and Eastern regions (percent demand covered >50%). Low population density counties have the potential to meet their annual water needs with RWH, while high‐density counties could only source a small portion (~20%) of their annual demand with RWH. Typical RWH systems in counties in the Central and Eastern U.S. performed better than in Western counties. Adding a reuse component can be a key factor in making RWH attractive in many areas of the country. This work can inform future water infrastructure investment and planning in the U.S.     

Assessment of residential rainwater harvesting efficiency for meeting non-potable water demands in three climate conditions

Global demand for clean water supplies is on the rise due to population growth. This is also true in most cities of Iran. Non-conventional water resources must be developed to partially offset the increasing demand. In this study, the applicability and performance of rainwater harvesting (RWH) systems to supply daily non-potable water were assessed. Storage of rain falling on the roofs of residential buildings and directed into installed tanks was simulated in three cities of varying climatic conditions, namely Tabriz (Mediterranean climate), Rasht (humid climate), and Kerman (arid climate). Daily rainfall statistics for a period of 53 years as well as the information on the contributing roof area, available tank volumes and non-potable water demand were collected in each city. Typical residential buildings with roof areas of 60, 120, 180 and 240 m² with an average of four residents in each house were considered for the study. According to the results in humid climate, it is possible to supply at least 75% of non-potable water demand by storing rainwater from larger roof areas for a maximum duration of 70% of the times. For roofs with small surface area, the supply meets 75% of non-potable water demand for a maximum duration of 45% of the times. Moreover, for Mediterranean climate, it is possible to supply at least 75% of non-potable water demand in buildings with larger roof areas for a maximum duration of 40% of the times. It is also found that in arid climate, similar duration is only 23% of the times.     

Potential for rainwater use in high-rise buildings in Australian cities

Rainwater is a traditional but underutilized water resource that has today had a resurgence due to the worldwide water crisis. This paper demonstrates the outcomes of research on the feasibility of rainwater use in high-rise residential envelopes for four Australian cities of Melbourne, Sydney, Perth and Darwin. Different climate patterns and various levels of water demand management were established for determination of storage dimensions; annual tank water use; reduction in both imported water flow and stormwater disposal; and water spillage from tanks. High level water demand management was a profoundly effective tool for reducing potable water supply, especially in combination with rainwater use. The economic feasibility of rainwater use systems were estimated; with Sydney having the shortest payback period compared to other cities either both with 3A rated appliances (8.6 years) or 5A ones installed (10.4 years). That was due to the higher and more consistent rainfall in Sydney. An outcome of this study was that Sydney was likely most suited to rainwater use, followed by Perth, Darwin, and then Melbourne. The objective of this study was to fill in the gap in estimating feasibility of rainwater use in various Australian cities. This investigation endeavors to provide assistance to water authorities and urban planners of Australian cities with the consideration of the potential of rainwater harvesting.     

Design and operational parameters of a rooftop rainwater harvesting system: definition, sensitivity and verification

The appropriate design and evaluation of a rainwater harvesting (RWH) system is necessary to improve system performance and the stability of the water supply. The main design parameters (DPs) of an RWH system are rainfall, catchment area, collection efficiency, tank volume and water demand. Its operational parameters (OPs) include rainwater use efficiency (RUE), water saving efficiency (WSE) and cycle number (CN). The sensitivity analysis of a rooftop RWH system's DPs to its OPs reveals that the ratio of tank volume to catchment area (V/A) for an RWH system in Seoul, South Korea is recommended between 0.03 and 0.08 in terms of rate of change in RUE. The appropriate design value of V/A is varied with D/A. The extra tank volume up to V/A of 0.15～0.2 is also available, if necessary to secure more water. Accordingly, we should figure out suitable value or range of DPs based on the sensitivity analysis to optimize design of an RWH system or improve operation efficiency. The operational data employed in this study, which was carried out to validate the design and evaluation method of an RWH system, were obtained from the system in use at a dormitory complex at Seoul National University (SNU) in Korea. The results of these operational data are in good agreement with those used in the initial simulation. The proposed method and the results of this research will be useful in evaluating and comparing the performance of RWH systems. It is found that RUE can be increased by expanding the variety of rainwater uses, particularly in the high rainfall season.     

乌鲁木齐城市小区雨水收集回用系统设计建议——以晨光-佳苑为例

运用城市小区雨水资源收集回用系统成为了城市节约水资源新的途径。分析了乌鲁木齐晨光-佳苑住宅小区原有雨水收集回用状况,建议采用雨水入渗技术,对原有设计系统进行改造,增加新的雨水收集回用系统,探讨改造小区雨水收集回用系统的可行性,提出完善新增雨水收集回用系统的建议。     

Optimisation of rainwater tank design from large roofs: A case study in Melbourne, Australia

Rainwater tanks for larger roof areas need optimisation of tank size, which is often not carried out before installation of these tanks. This paper presents a case study of rainwater tank evaluation and design for large roof areas, located in Melbourne, Australia, based on observed daily rainfall data representing three different climatic regimes (i.e. dry average, and wet years). With the aim of developing a comprehensive Decision Support Tool for the performance analysis and design of rainwater tanks, a simple spreadsheet based daily water balance model is developed using daily rainfall data, contributing roof area, rainfall loss factor, available storage volume, tank overflow and irrigation water demand. In this case study, two (185 m³ and 110 m³) underground rainwater tanks are considered. Using the developed model, effectiveness of each tank under different climatic scenarios are assessed. The analysis shows that both the tanks are quite effective in wet and average years, however less effective in dry years. A payback period analysis of the tanks is preformed which reveals that the total construction cost of the tanks can be recovered within 15-21 years time depending on tank size, climatic conditions and future water price increase rates. For the tanks, a relationship between water price increase rates and payback periods is developed. The study highlights the need for detailed optimisation and financial analysis for large rainwater tanks to maximise the benefits.     

Water Supply and Stormwater Management Benefits of Residential Rainwater Harvesting in U.S. Cities

This article presents an analysis of the projected performance of urban residential rainwater harvesting systems in the United States (U.S.). The objectives are to quantify for 23 cities in seven climatic regions (1) water supply provided from rainwater harvested at a residential parcel and (2) stormwater runoff reduction from a residential drainage catchment. Water‐saving efficiency is determined using a water‐balance approach applied at a daily time step for a range of rainwater cistern sizes. The results show that performance is a function of cistern size and climatic pattern. A single rain barrel (190 l [50 gal]) installed at a residential parcel is able to provide approximately 50% water‐saving efficiency for the nonpotable indoor water demand scenario in cities of the East Coast, Southeast, Midwest, and Pacific Northwest, but <30% water‐saving efficiency in cities of the Mountain West, Southwest, and most of California. Stormwater management benefits are quantified using the U.S. Environmental Protection Agency Storm Water Management Model. The results indicate that rainwater harvesting can reduce stormwater runoff volume up to 20% in semiarid regions, and less in regions receiving greater rainfall amounts for a long‐term simulation. Overall, the results suggest that U.S. cities and individual residents can benefit from implementing rainwater harvesting as a stormwater control measure and as an alternative source of water.     

INDUSTRIAL WATER DEMAND WITH WATER REUSE1

ABSTRACT: This work establishes an industrial water demand (IWD) model for a short term estimate, which considers water reuse technologies and discharge regulations, for the integrated circuit (IC) industry in northern Taiwan. Based on the optimization of an industrial water cost system, a computerized system dynamics model (SD model) is developed to generate individual firm IWD using data from year 2000. A market IWD is further constructed for 25 1C firms in the study area and is approximated by an inverse logistic curve. Analytical results demonstrate that price elasticity varies with water price in cases involving water reuse.     

RESIDENTIAL WATER CONSERVATION: CASA DEL AGUA1

ABSTRACT: A single-family residence in Tucson, Arizona, was retrofitted with water-conserving fixtures, rainwater harvesting, and graywater reuse systems. During a four-year study, efficient use of water was shown to significantly decrease demand for domestic water at the house without reducing the residents' quality of life. The use of municipal water was reduced by 66 percent to 148 gallons per day (gpd) and total household use was reduced by 27 percent to 245 gpd. Graywater reuse averaged approximately 77 gpd or 32 percent of the total household water use. Evaporative cooling required about 15 gpd. Water use for toilet flushing was only 9 gallons per capita per day (gpcd) or 14 percent of interior water use.     

A LINEAR ANALYSIS OF AN URBAN WATER SUPPLY SYSTEM1

The use of linear programming as a planning tool for determining the optimal long-range development of an urban water supply system was explored. A stochastic trace of water demand was synthesized and used as an input to the model. This permitted evaluating the feasibility of imposing demand restrictions as an effective cost reduction mechanism. The City of Lincoln, Nebraska, was used as the urban model. The fundamental problem was to allocate limited water supplies from several sources to an urban load center to minimize costs and comply with system constraints. The study period covered twenty years, and findings indicate the planning direction for stage development during this period. Sensitivity analyses were performed on cost coefficients and demands. Thirteen sources were included in the initial computations. Conclusions were that linear programming and generated demand traces are useful tools for both short- and long-term urban water supply planning. Lowering peak demands results in long-range development of fewer sources of supply and more economic and efficient use of the supplies developed.     

Wastewater Reuse Practices in Kuwait

Water is a scarce commodity in Kuwait. With rapid growth of population coupled with increasing urbanization and agriculture, the demand for water in Kuwait is continually on the increase. The main water source in the country is from desalination with small quantities from underground aquifers. Wastewater effluent at least for irrigation purposes, could be a valuable source to augment this dwindling water supply, and should not continue to be wasted. Reuse of wastewater effluent could both minimize the disposal of water to the environment and reduce the demand on fresh water supplies. This paper discusses the features of reuse, the processes used and standards adopted. Design data, operational results, and physical characteristics for the three wastewater treatment plants (Ardiya, Jahra, and Riqqa) in Kuwait are discussed. In addition, the paper reports on the results of a research study undertaken to determine the willingness, level of awareness and knowledge among the people of Kuwait in using wastewater effluent for different purposes. Cost and benefit analyses were conducted on wastewater effluent and reuse. The study concludes with useful recommendations to both the authorities and the citizens of Kuwait.     

Evaluation of alternative water sources for commercial buildings: A case study in Brisbane,Australia

Commercial buildings are central to cities and contribute significantly to the urban demand for natural resources, including freshwater. Green building benchmarking tools include more efficient water use as key indicator of sustainability. This paper explores options for substituting mains drinking water with an alternative, non-potable water source on a fit for purpose basis. The research findings are based on a monitoring study of a commercial building in Brisbane, Australia that is harvesting rainwater for meeting non-potable water demand. The results demonstrated that the system is only achieving moderate reliability in meeting demand due to operational problems. The case study analysis has highlighted the need to include validation and monitoring to ensure the system is operating as per design intent. The paper also investigates the potential of other local, non-potable water sources for high-rise commercial buildings, in particular air conditioning condensate and groundwater inflow to a basement wet well. The paper concludes by comparing the advantages and disadvantages of different local water sources which highlights the need to undertake a site specific investigation to identify a suitable alternative water source, which considers O&M complexity and the capacity of facilities management.     

Rain Water Harvesting in Bermuda1

Rowe, Mark P., 2011. Rain Water Harvesting in Bermuda. Journal of the American Water Resources Association (JAWRA) 47(6):1219–1227. DOI: 10.1111/j.1752‐1688.2011.00563.x Abstract: Roof‐top rain water harvesting is mandated by law for all buildings in Bermuda and is the primary source of water for domestic supply. The average rate at which rain water is harvested at the typical house with four occupants is, however, insufficient to meet average demand. While just over one‐third of households have access to supplementary water either from mains pipelines or private wells, the majority rely on deliveries from water “truckers” (tankers) to augment their rain water supply. Assuming a reasonably constant daily demand, there is a linear relationship between the “maximum optimum capacity” of a water storage tank and the size of the rain water catchment area, which depends on the characteristics of the rainfall at a given geographic location. A simple spreadsheet model was developed to simulate tank storage levels for various combinations of catchment area, tank capacity, and demand, with an input of actual daily rainfall data for a study period of nearly three years. It was found that for typical cycles of rainfall surpluses and deficits in Bermuda, the tank capacity which there is no benefit in exceeding — the “optimum maximum capacity”— is 0.37 m³ of storage capacity per 1 m² of catchment area. Furthermore, it was concluded that many domestic water storage tanks in Bermuda are larger than necessary, especially so where there is a significant imbalance between rain water supply and demand.     

秦皇岛市水资源现状与可持续利用对策研究

随着社会经济的发展,水资源消耗日益增加,供需矛盾日益突出。秦皇岛市已面临水资源日益紧张的严峻形势,节流和开源,建立节水型社会体系,积极开发利用再生水、海水和雨水等非常规水源以及合理地配置和利用水资源,是实现秦皇岛市水资源可持续利用的有效措施。     

Assessment of Residential Rain Barrel Water Quality and Use in Cincinnati,Ohio1

The collection, storage, and reuse of rainwater collected in rain barrels from urban rooftop areas assists municipalities in achieving stormwater management objectives and in some areas also serves as an adjunct resource for domestic water supplies. In this study, rainwater reuse and levels of select microbial indicators were monitored for six residential rain barrels located in the Shepherd Creek watershed of Cincinnati, Ohio. Water from rain barrels typically had poor microbial quality and was used for watering indoor and outdoor plants. Rain barrel water chemistry was slightly acidic, exhibited wide ranges in conductivity, turbidity, and total organic carbon (TOC) concentrations and gave no evidence of the presence of cyanobacterial microcystin toxins. Selected microbial water‐quality indicators indicated that counts of total coliform and enterococci were consistently above U.S. Environmental Protection Agency standards for secondary recreational contact water‐quality standards. Residential rain barrels can provide water appropriate for low‐contact reuses (such as plant watering), although there may be transient periods of high levels of indicator bacteria in the collected water.     

Experience with Rainwater Catchment Systems in Kenya and Botswana

Rainwater catchment is a valuable but frequently neglected alternative a domestic water supply in the developing world. In the arid and semi-arid areas of Kenya and Botswana a number of water supply programmes which depend wholly or in part on rainwater catchment are currently being implemented. This paper discusses this experience and describes the various construction techniques being used. It has been found that rainwater catchments has a number of very unique advantages and relatively few disadvantages. It is argued that more consideration should be given to the inclusion of rainwater catchment systems, especially in rural water supply programmes.     

Rethinking urban water management in Addis Ababa in the face of climate change: An urgent need to transform from traditional to sustainable system

Urban water management in Addis Ababa, Ethiopia, is of significant concern to the city government owing to the growing demand for water, poor urban water management practices, insufficient and ineffective infrastructures, and climate change. The objective of this study is to review current water resources and management practices, consider the sustainability of the urban water cycle in relation to climate change, and devise a feasible strategy for a sustainable urban water management system. The results of this study show that the situation as it is now is not sustainable at current levels of demand and supply, either in terms of the systems’ management practices, or in terms of the challenges posed by climate change. An Integrated Urban Water Management strategy that covers the entire urban water cycle, including diversification of water sources, protection and conservation of water, sustainable exploitation, distribution, and consumption and wastewater management, water recycling, nutrient reuse, and safe wastewater disposal, should be implemented as soon as practicable.     

Water Supply Planning Considering Uncertainties in Future Water Demand and Climate: A Case Study in an Illinois Watershed

Ensuring an adequate, reliable, clean, and affordable water supply for citizens and industries requires informed, long-range water supply planning, which is critically important for water security. A balance between water supply and demand must be considered for a long-term plan. However, water demand projections are often highly uncertain. Climate change could impact the hydrologic processes, and consequently, threaten water supply. Thus, understanding the uncertainties in future water demand and climate is critical for developing a sound water supply plan. In Illinois, regional water supply planning attempts to explore the impacts of future water demand and climate on water supply using scenario analyses and hydrologic modeling. This study is aimed at developing a water supply planning framework that considers both future water demand and climate change impacts. This framework is based on the Soil and Water Assessment Tool to simulate the watershed hydrology and conduct scenario analyses that consider the uncertainties in both future water demand and climate as well as their impacts on water supply. The framework was applied to water supply planning efforts in the Kankakee River watershed. The Kankakee River watershed model was calibrated and validated to observed streamflow records at four long-term United States Geological Survey streamflow gages. Because of the many model parameters involved, the calibration process was automated and was followed by a manual refinement, resulting in good model performance. Long-range water demand projections were prepared by the Illinois State Water Survey. Six future water demand scenarios were established based on a suite of assumptions. Climate scenarios were obtained from the Coupled Model Intercomparison Projection Phase 5 datasets. Three representative concentration pathways (RCPs), RCP2.6, RCP4.5, and RCP8.5, are used in the study. The scenario simulation results demonstrated that climate change appears to have a greater impact on water availability in the study area than water demand. The framework developed in this study can also be used to explore the impacts of uncertainties of water demand and climate on water supply and can be extended to other regions and watersheds.     

Performance analysis of on-farm irrigation tanks on agricultural drainage water reuse and treatment

Water reuse and pollutant removal efficiency analysis of the on-farm irrigation tanks (OFTs) was carried out in rice paddy field region of Zhanghe Irrigation District, Southern China through field experiments during the rice growing season of 2009–2011. Water flow measurements indicate that 20.6–68.9% of drainage water captured by OFTs was reused for supplemental irrigation. Rainfall was the most important factor that determines the water reuse efficiency (WRR) of OFTs, since higher rainfall resulted in higher surplus irrigation water draining out of OFTs without reuse, and thus decreased WRR. Fully using the storage capacity for storing return flow, and releasing totally for supplemental irrigation also enhanced WRR of OFTs. Water quality analysis shows that OFTs removed 47.2% of total phosphorous (TP) and 60.8% of total nitrogen (TN) of inflow and have a great effect on increasing sedimentation for return flow as the mean of removal efficiency of pollutant load (REL) for suspended solids (SS) amounted to 68.4%. For water treatment effectiveness of OFTs, high hydraulic retention time (HRT) is most beneficial to increase REL of TN whereas REL of TP is not sensitive to HRT. These results confirm that OFTs can effectively increase agricultural return flow reuse and remove pollutants. As the cascade OFTs irrigation system recycle return flow for several times, the irrigation water demand from outside of region was reduced significantly for rice production. Coupling with the effect of cyclic irrigation on the nutrients recycling by paddy fields, OFTs irrigation system also considerably mitigate the N and P off-site emission. Therefore, it is advisable to integrate the role of OFTs on water reuse and treatment for water saving irrigation and ecological management of paddy fields landscape.     

Quantification of potable water savings by residential water conservation and reuse - A case study

To demonstrate the benefits of water conservation at the household level in regional Victoria in Australia, a family house “Sharland Oasis” was designed and built according to an ecologically sustainable design for improved water and energy efficiency. This study has demonstrated that the combined use of alternative water supplies together with water efficient appliances can save up to 77% of total potable water use compared to the average 1990s household water use in the same region considering the location and differing in water use approach. The use of rainwater inside the home alone saved up to 40% of potable water use. In addition to the water savings, there is a significant wastewater discharge saving achieved through the use of water conservation strategies and greywater reuse. A community survey undertaken in regional Victoria revealed that community receptivity for reusing greywater is highest for uses, such as watering gardens and flushing toilets; but it progressively decreased with increasing personal contact with greywater. Positive perception of greywater reuse needs to be encouraged through programs targeted at developing resources, skills and motivation for new water reuse practices and technologies, across a diverse range of social groups.