The critical runaway condition and stability criterion in the phenol–formaldehyde reaction

The procedure of phenol–formaldehyde polymerization is a rather important and complicated reaction in the chemical industry. This exothermic polymeric reaction releases a huge amount of heat. The high amount of energy accumulated and increasing temperature in this reaction process always lead to runaway reaction and a hazard situation owing to the high released heat and improper operation. In this investigation, we used sodium hydroxide as alkali–catalyst in the phenol–formaldehyde polymerization and estimated the reaction kinetics parameters to evaluate the thermal hazard conditions. The critical temperatures and stable criteria of the runaway reaction in this exothermic polymerization were evaluated. This technique is important and useful for safe operation in the phenol–formaldehyde polymerization process.     

基于VSP2的引发剂质量分数对醋酸乙烯聚合反应失控特性及安全泄放设计影响研究

为了解决醋酸乙烯聚合反应失控所引起的超压问题,通过VSP2绝热量热仪研究了醋酸乙烯聚合反应的失控特性,并通过Leung's法对某醋酸乙烯聚合反应器的安全泄放面积进行了计算;然后,在其他条件不变的情况下,研究引发剂质量分数对失控特性和泄放面积的影响,结果表明,引发剂质量分数对反应总放热量的影响不大,体系绝热温升为105~115℃;但引发剂质量分数越大,失控反应的最大温升速率和最大压升速率越大。这是因为引发剂质量分数越大,在相同泄放压力和最大累积压力下,单位质量反应物的放热速率就越大,也就需要更大的泄放面积;最后,引入无量纲数W~*、G~*和A~*,拟合出它们与引发剂质量分数X*的关系式,结果表明,在研究范围内所需安全泄放面积随引发剂质量分数线性增大。     

A general criterion to define runaway limits in chemical reactors

A general runaway criterion valid for single as well as for multiple reaction types, i.e. consecutive, parallel, equilibrium, and mixed kinetics reactions, and for several types of reactors, i.e. batch reactor (BR), semibatch reactor (SBR) and continuous stirred tank reactor (CSTR) has been developed. Furthermore, different types of operating conditions, i.e. isoperibolic and isothermal (control system), have been analysed. The criterion says that we are in a runaway situation when the divergence of the system becomes positive (div>0) on a segment of the reaction path. The results show that this is a general runaway criterion than can be used to calculate the runaway limits for chemical reactors. The runaway limits have been compared with previous criteria. A considerable advantage, over existing criteria, is that it can be calculated on-line using only temperature measurements and, hence, it constitutes the core of an early warning runaway detection system we are developing.     

Probe into effect of the initiator on the thermal runaway hazards of methyl methacrylate bulk polymerization

The bulk polymerization of methyl methacrylate (MMA) is of great importance in chemical industry, but the polymerization process is highly hazardous, and few reports have focused on the effect of initiators on its thermal hazards. In this work, to thoroughly explore the thermal hazard characteristics, the runaway behavior of MMA bulk polymerization is investigated by a combination of thermodynamics experimental and kinetics theoretical methods. The results indicate that the presence of initiator exhibits an undesirable thermal hazard to the MMA bulk polymerization, and its exothermic behavior is also greatly influenced by the type and concentration of initiator. For azobisisoheptanenitrile (ABVN), azodiisobutyronitrile (AIBN) and dibenzoyl peroxide (BPO) initiators as examples, the AIBN-initiated reaction has the shortest adiabatic induction period (39.51 min), whereas the BPO-initiated polymerization exhibits the strongest maximum temperature-rising rate and maximum pressure-rising rate. Under adiabatic runaway, the temperature and pressure change significantly with increasing AIBN concentration, revealing a great potential risk of thermal runaway. Kinetic parameters are calculated to further understand the thermal runaway mechanisms, showing a strong agreement with the adiabatic experimental data. Finally, based on the cooling failure scenario, severity grading is determined by the evaluation criteria. The current work provides extensive data as a reference and guidance for the process design and optimization of MMA bulk polymerization from the perspective of safety.     

Thermal hazards analysis of styrene in contact with impurities

Styrene is a reactive monomer commonly used to produce polystyrene and other copolymers. Unintended thermal runaway polymerization reactions of styrene keep reoccurring and have led to catastrophic consequences. One of the possible causes of these runaway incidents involves the contamination of the styrene monomer by incompatible species, which was not adequately investigated and documented. This study focuses on the quantification of thermal runaway hazards of styrene in contact with a series of contamination substances by adopting calorimetric analysis. Both Differential Scanning Calorimeter (DSC) and Advanced Reactive System Screening Tool (ARSST) were employed to examine the exothermic characteristics of styrene mixed with contaminating substances at different concentration levels and mixing conditions. Key safety parameters of the exothermic reaction, such as the onset temperature, the overall heat release, the maximum self-heating rate, as well as the activation energy, were obtained. The results indicated that the thermal runaway polymerization of purified styrene was significantly altered by the presence of contaminant species. Water effectively retarded and quenched the runaway polymerization at a higher temperature range. Alkaline had no substantial effect on the thermal runaway characteristics. The presence of acid solution under both static contact and vigorous mixing condition significantly promoted the thermal polymerization of styrene. A trace amount of concentrated acid initiated violent exothermic activity even at room temperature; and the severity of the reaction was profoundly impacted by the mass-transfer. Our study demonstrates significant implications in the prevention of runaway incidents during transportation and storage of styrene.     

Using thermal analysis with kinetic calculation method to assess the thermal stability of azo compound on construction materials

The application of construction polymers in engineering and alternative materials has always occupied a place in the market. In the production process of polymer resins, initiators can be used to lower the polymerization reaction energy threshold, which can improve reaction efficiency and reduce energy loss. However, as a commonly used energetic substance in the polymerization process, azos have caused related process hazards due to their exothermic characteristics. Because of this, it is essential to examine and analyze the thermal hazard characteristics of emerging azo substances, such as 2-cyanopropan-2-imemicarbazide (CABN). Although previous literature performs the calculation on related thermal hazard parameters of CABN, there is still exists a void for discussion in estimating the reaction model to avoid analogous hazards and enhance the existing thermal analysis. Based on the past literature, the reaction model is improved with thermogravimetric analysis as evidence. The revised thermal hazard parameters are calculated as the basis of control and mitigation measures, the kinetic model is used to estimate the modified safety parameters, and in the judgment of the runaway reaction, the critical temperature of the runaway is found by analyzing the influence of slight changes in ambient temperature on the reaction temperature. The results show that the critical temperature that causes CABN to enter the runaway reaction is delayed, and the hazard is lower than in the storage situation. Therefore, the thermal hazard to CABN mainly focuses on the safety environment and measures during storage.     

Diphenylmethane diisocyanate self-polymerization: Thermal hazard evaluation and proof of runaway reaction in gram scale

Thermal analysis by differential scanning calorimetry and thermogravimetric/differential thermal analysis mass spectrometry, adiabatic calorimetry, a gram-scale heating test, and infrared spectroscopy were performed to evaluate the thermal hazards of diphenylmethane diisocyanate (MDI) and prove the occurrence of a runaway reaction. The self-polymerization of MDI was found to occur at about 340 °C under rapid heating conditions. Carbon dioxide was eliminated and heat was generated to allow polymerization. Under adiabatic and closed conditions, the runaway reaction of MDI can begin at least from 220 °C. Besides it is highly probable that the runaway reaction of MDI can begin from a lower temperature in an actual process scale. More heat was generated than in the previous case and the pressure rose rapidly. A closed 2-mm-thick glass vessel exploded because of the runaway reaction of MDI even if the temperature was lower than 300 °C. Therefore, MDI could cause fatal runaway reactions below 300 °C, where MDI had been assumed to self-polymerize by eliminating carbon dioxide previously.     

氯乙烯聚合反应器爆炸危险性分析

通过故障树方法辨识出可能导致氯乙烯聚合反应器发生爆炸的基本事件,及其与聚合釜爆炸之间的逻辑关系.利用危险与可操作性研究方法分析了工艺中可能导致聚合釜爆炸的工艺偏离及其产生的原因和后果,明晰了工艺危险性的主要控制因素.针对聚氯乙烯生产工艺提出安全控制措施.     

Model-based zero emission safety concept for reactors with exothermal reactions for chemical plants

To avoid major accidents caused by runaway reactions, a new safety concept called SmartHIP¹ is introduced, with the objective to prevent runaway reactions and avoid emissions. The basic principle is based on an online model-based approach by using safety instrumented systems. Different criteria exist for calculating the hazard potential of a runaway reaction and its early detection. The approaches of the literature from the last years are analysed and divided into three different groups: Divergence, Accumulation and Adiabatic Criterion. Each approach is compared to the other by applying it to an esterification reaction of acetic anhydride with methanol. The approaches are evaluated according to different requirements, like accuracy, wide range of application or reliability.     

Comparison of criteria for prediction of runaway reactions in the sulphuric acid catalyzed esterification of acetic anhydride and methanol

Loss of temperature control is one of the major reasons that can lead to runaway reaction. This occurrence is commonly named thermal runway. The aim of this paper is the application of thermal runaway criteria in order to predict the onset of runaway phenomena and define the range of stability related to operating conditions in the reactor, with specific reference to the esterification of acetic anhydride and methanol catalysed by sulphuric acid tested in isoperibolic conditions. The isoperibolic calorimeter has also been used to obtain thermodynamic, kinetic and physical chemistry data necessary to develop a model for the reaction. Some runaway criteria applied in this work require a model for the process, so a model for the analyzed system been developed.Because of the modest reaction enthalpy and low activation energy this reacting system provide a severe test to the runaway criteria.In this work, various runaway criteria have been applied to the experimental and simulated data and the results obtained have been compared.     

Thermal risk in batch reactors: Theoretical framework for runaway and accident

Thermal safety and risk of accidents are still challenging topics in the case of batch reactors carrying exothermic reactions. In the present paper, the authors develop an integrated framework focusing on defining the governing parameters for the thermal runaway and evaluating the subsequent risk of accident. A relevant set of criteria are identified in order to find the prior conditions for a thermal runaway: failure of the cooling system, critical temperature threshold, successive derivatives of the temperature (first and second namely) vs. time and no detection in due time (reaction time) of the runaway initiation. For illustrative purposes, the synthesis of peracetic acid (PAA) with hydrogen peroxide (HP) and acetic acid (AA) is considered as case study. The critical and threshold values for the runaway accident are identified for selected sets of input data. Under the conditional probability of prior cooling system failure, Monte Carlo simulations are performed in order to estimate the risk of thermal runaway accident in batch reactors. It becomes then possible to predict the ratio of reactors, within an industrial plant, potentially subject to thermal runaway accident.     

基于火探管式的锂离子电池灭火技术研究

为研究锂离子电池灭火方案,基于火探管灭火技术同时利用新型清洁灭火剂Novec 1230,组装成火探管灭火系统。在灭火测试平台上以功率为200 W的电热管作为外热源引发单电池或电池模组热失控,通过改变火探管的布置位置,记录相应的灭火行为以及灭火效率,并对实验结果进行了分析。研究结果表明,当火探管灭火系统直接布置在电池正上方时,在起火后的5.6s内控制火情;随着灭火剂用量增加可以显著降低体系温度,防止电池复燃以及连锁热失控现象发生;火探管有效覆盖区域外的失控电池作为热源将继续加热临近电池,引发连锁热失控,造成灭火系统失效;根据电池热失控后的燃烧行为以及传热行为,提出相应的火探管灭火系统复合方案。     

A comparative analysis between temperature and pressure measurements for early detection of runaway initiation

In this work, we have analysed the use of pressure instead of temperature measurements for the early warning detection of runaway initiation. This is possible due to the fact that our runaway criterion, i.e. div>0, does not depend specifically on which state space variable we are using for divergence calculation. A series of runaway experiments, carried out in a 250 l pilot-scale reactor, has been used to compare the results. In accordance with previous analysis, we show that by using temperature, early detection of runaway initiation is achieved. Analogously to temperature, pressure may be also used for runaway detection. By comparing the different types of reactive systems analysed (vapour and gassy), it can be observed that temperature works better, in terms of earlier detection, than pressure but the differences are more pronounced for vapour than for gassy systems.     

Evaluation of thermal hazard characteristics of four low temperature reactive azo compounds under isothermal conditions

The polymerization reaction can lower the threshold of the required energy by the initiator to improve the efficiency of the overall process reaction. Emerging polymerization initiators are also a major focus of process improvement and technological progress. Azo compounds (azos), which used in dyeing applications, are subsequently used in polymerization reactions due to their highly exothermic reaction characteristics. Although higher heat release can promote polymerization and modify the product, heat generation may also cause process hazards.These thermal hazard parameters were studied by selecting dimethyl 2,2′-azobis(2,4-dimethylvaleronitrile) (ABVN), 2,2′-azobis(2-methyl propionate) (AIBME), 2,2′-azobis(2-methylpropionamide) dihydrochloride (AIBA), and 2,2′-azobis(isobutyronitrile) (AIBN), which are common azo initiators at present. Thermal hazards are closely related to the reaction kinetics of the substance itself. The form of the reaction, the apparent activation energy and the thermodynamic parameters of the exothermic mode were also obtained.Kinetic analysis of the actual process using the experimental data of the isothermal calorimetry model is rarely used in the evaluation of related thermal hazard characteristics. The simulation results revealed the kinetic azo models and were further applied to calculate the runaway situations of azo under specific boundary conditions.     

化学放热系统热爆炸潜在危险性评价

讨论化学放热系统的热稳定性和临界条件,用化学反应物无消耗的假设推导化学放热系统热失控(热爆炸)时的动力学参数临界值,得到热失控的判据、临界点火温度和熄火温度。提出用系统安全指数概念来评价放热反应系统发生热爆炸的潜在危险性,分析化学放热系统的平衡域。用硝酸甲酯分解爆炸实例,说明如何利用安全指数对具有热爆炸可能性的系统的潜在危险性进行定量评价,其预测结果与实验结果一致。     

Evaluating time to maximum rate (TMR) and self-accelerating decomposition temperature (SADT) of self-polymerizing vinyl acetate monomer

Vinyl acetate monomer (VAM) is widely used as a chemical intermediate producing a variety of copolymer products. Besides, VAM has the tendency to readily decompose into free radicals and ions that initiates the self-sustaining polymerization reaction. The non-isothermal experiments of VAM were performed using differential scanning calorimetry (DSC), and the calculations of the kinetic parameters from temperature-programmed DSC curves have been evaluated by the isoconversional method. The thermal analysis of VAM was proceeded using the advanced thermal analysis software (AKTS) to figure out the time to maximum rate (TMR) and self-accelerating decomposition temperature (SADT) for a proactive safety design of VAM. Subsequently, the kinetic model is used to predict the potential thermal runaway in the VAM-PVAc polymerizing process.     

Thermal research on the uncontrolled behavior of styrene bulk polymerization

Thermal runaway can occur during the styrene bulk polymerization process because of easily formed local hotspots resulting from the high viscosity of reactants and the difficulty of heat dissipation. To obtain the thermal hazard characteristics, the polymerization behavior of styrene was investigated using differential scanning calorimetry (DSC) at a scanning rate of β = 2 °C/min. Experimental results showed that the exothermic peaks obtained for heat initiation were different from those obtained when initiator was added. The exothermic peak changed from one to two after the initiator was added. The exothermic onset temperature (T₀) was also reduced. Phi-tech II was utilized to study the bulk polymerization of styrene in an adiabatic environment. The adiabatic temperature rise (ΔT_ad), starting temperature of uncontrolled polymerization (T_star), maximum temperature (T_end), and heat of polymerization (ΔH) under different conditions were acquired. When the dose of the additive was increased, the starting temperature of uncontrolled polymerization (T_star) decreased and the adiabatic temperature rise (ΔT_ad) increased gradually. Severity grading was performed based on the severity evaluation criteria of runaway reaction. The results can help designers decide whether it is necessary to take certain measures to reduce risk.     

Inherent thermal runaway hazard evaluation method of chemical process based on fire and explosion index

Thermal runaway hazard assessment provides the basis for comparing the hazard levels of different chemical processes. To make an overall evaluation, hazard of materials and reactions should be considered. However, most existing methods didn't take the both into account simultaneously, which may lead the assessment to a deviation from the actual hazard. Therefore, an integrated approach called Inherent Thermal-runaway Hazard Index (ITHI) was developed in this paper. Similar to Dow Fire and Explosion Index(F&EI) function, thermal runaway hazard of chemical process in ITHI was the product of material factor (MF) and risk index (RI) of reaction. MF was an indicator of material thermal hazards, which can be determined by initial reaction temperature and maximum power density. RI, which was the product of probability and severity, indicated the risk of thermal runaway during the reaction stage. Time to maximum rate under adiabatic conditions and criticality classes of scenario were used to indicate the runaway probability of the chemical process. Adiabatic temperature rise and heat of the desired reaction and secondary reaction were used to determine the severity of runaway reaction. Finally, predefined hazard classification criteria was used to classify and interpret the results obtained by this method. Moreover, the method was validated by case studies.     

氧化还原体系低温引发丙烯酸酯乳液聚合安全风险研究

以甲基丙烯酸甲酯、丙烯酸酯乙酯、丙烯酸酯丁酯为反应单体,十二烷基苯磺酸钠为乳化剂,过硫酸铵为氧化剂,亚硫酸氢钠为还原剂,在低温下进行乳液聚合。主要研究了反应单体的热稳定性及反应过程中的相关热力学参数,最后按照规定对该聚合体系进行了安全风险研究。研究结果表明,丙烯酸酯混合单体无热分解放热风险,丙烯酸酯乳液体系的绝热温升(△Tad)为49.6℃,失控体系能达到的最高温度(MTSR)为91.9℃,该体系的最终反应工艺危险度评估为1级,聚合工艺热风险低。     

Thermal risk in batch reactors: Case of peracetic acid synthesis

The present paper deals with accidents risk in batch reactors. It identifies the conditions for the occurrence of a thermal runaway and develops a probabilistic approach to assess the relevant risk. It investigates also the conditions for optimal synthesis of peracetic acid (PAA) with hydrogen peroxide (HP) and acetic acid (AA). The kinetic model of reversible reaction and side reaction of PAA synthesis is used to predict reactor temperature and molar ratio of PAA by ASPEN PLUS software. A sensitivity analysis is performed under different conditions such as constant temperature or adiabatic process with different concentrations of sulfuric acid. Assuming a prior cooling system failure, the conditions for reaction runaway triggering a thermal accident are identified in the case of PAA synthesis. Monte Carlo simulations are used in order to calculate the conditional probability of accident and optimize the synthesis of PAA.