Prioritizing occupational injury prevention in the construction industry: injury severity or absence?

PROBLEM: National occupational injury prevention goals often prioritize the reduction of serious injuries. This study analyzed whether this prioritization is credible in respect to lost-time injuries and short and long term work absence, and the implications this has for injury severity-based versus injury absence-based prevention approaches. METHOD: The data consisted of national and work-site specific injury and absence data from construction workers in Denmark, including workers from the Copenhagen Metro construction sites, during the period 2000-2001. RESULTS AND IMPACT ON INDUSTRY AND GOVERNMENT: Absence length was significantly dependent on the type of injury. Sprains and strains were most prevalent and accounted for approximately one third of injuries and absence. Fractures accounted for one sixth of injuries and the greatest proportion of long-term absence. The results give credibility to the need for targeting sprains and strains in injury and absence prevention initiatives.     

Occupational injuries and health problems in the Egyptian Mediterranean fisheries

Marine fishing is one of the most dangerous occupations. So far, no studies addressing occupational safety and health in the Egyptian fisheries have been conducted. The objective of this study is to explore and identify the types and causes of, as well as some factors associated with, occupational accidents and illnesses in the Egyptian marine fisheries. A sample of 686 fishermen in El-Maaddiya fishing port were interviewed for collecting relevant data. This paper presents the types of injuries mentioned by the interviewed fishermen and their potential causes in terms of accident type and involved agency/agency part. Also, major health problems and potential causes are presented. Furthermore, a logistic regression analysis was performed to study the significance of the association of some factors, such as age, experience, education and fishing gear with the occurrence of injuries and illnesses. The results of this study show that the Egyptian fishing industry involve many hazardous work conditions and practices that result in high morbidity and mortality rates, and high injury rates. The study recommends further research on suitable measures for the management of this problem.     

Occupational injury rates among Norwegian farmers: A sociotechnical perspective

Introduction: This study addressed relative injury risk among Norwegian farmers, who are mostly self-employed and run small farm enterprises. The aim was to explore the relative importance of individual, enterprise, and work environment risks for occupational injury and to discuss the latent conditions for injuries using sociotechnical system theory. Method: Injury report and risk factors were collected through a survey among Norwegian farm owners in November 2012. The response rate was 40% (n = 2,967). Annual work hours were used to calculate injury rates within groups. Poisson regression using the log of hours worked as the offset variable allowed for the modeling of adjusted rate ratios for variables predictive of injury risk. Finally, safety climate measures were introduced to assess potential moderating effects on risk. Results: Results showed that the most important risk factors for injuries were the design of the workplace, type of production, and off-farm work hours. The main results remained unchanged when adding safety climate measures, but the measures moderated the injury risk for categories of predominant production and increased the risk for farmers working with family members and/or employees. An overall finding is how the risk factors were interrelated. Conclusions: The study identified large structural diversities within and between groups of farmers. The study drew attention to operating conditions rather than individual characteristics. The farmer’s role (managerial responsibility) versus regulation and safety climate is important for discussions of injury risk. Practical Applications: We need to study sub-groups to understand how regulation and structural changes affect work conditions and management within different work systems, conditioned by production. It is important to encourage actors in the political-economic system to become involved in issues that were found to affect the safety of farmers.     

Analysis of injury events with fuzzy cognitive maps

Issues related to health and safety at work, such as accidents at work, are one of the most important areas of action for global social policy. This paper presents a fuzzy cognitive map (FCM) approach to explore the importance of the relevant factors in industrial plants. For this purpose, industrial plants are described in terms of factors that affect injury risk and the causal relationships involved.In this work, the injuries in an Italian refinery have been studied. The company in this account has a system for monitoring and controlling the machinery but has a large number of minor injuries at work. The causes of these injuries have been found in human behaviours. To analyse the injuries, it is necessary to investigate what individual-level concerns are involved in the perception of risk. For this investigation, an FCM permits us to build a schema of the perception of risk. The resulting analysis of all of these schemas has allowed us to define a method that generically permits a determination of the causes for each type of injury. In fact, it has been possible to determine that factors such as poor attention and concentration or fatigue are the main causes of injuries at work.In light of the results obtained, managers can define appropriate control procedures to diminish the occurrences of the injuries.     

A survey of forest workers in New Zealand. Do hours of work, rest, and recovery play a role in accidents and injury?

PROBLEM: A number of structural and organizational changes have occurred recently within the New Zealand Forestry Industry, with concerns being raised about the impact of these changes on the forestry worker in terms of fatigue, sleepiness, and compromised safety. This study explored the relationship of fatigue, and some of its key determinants, with accidents and injuries in a group of forestry industry workers in New Zealand. METHOD: A total of 367 forestry workers responded to a self-administered questionnaire. RESULTS: Fatigue was found to be commonly experienced at work in the forest, with 78% of workers reporting that they experienced fatigue at least "sometimes." This study found that certain groups of workers reported long working hours, reduced sleep, compromised recovery time, and intensely paced work. The results of logistic regression analysis showed that recent sleep, number of breaks taken during the workday, and specific job/tasks were independently associated with reporting of high fatigue levels at work. Near-miss injury events were significantly more common among those reporting a high level of fatigue at work. Accidents and lost-time injury were associated with length of time at work, ethnicity, and having had near-miss injury events. DISCUSSION: Together, these results suggest that fatigue and aspects of work organization, which are likely to be fatiguing, may be associated with compromised safety for forest workers. IMPACT ON INDUSTRY: With an already slim margin of error present in forest operations, an impairment due to increased fatigue may constitute a significant risk factor for accidents and injuries in this workforce. The results indicate the need for further examination of shift and workload management among forestry workers, as well as a role for improving industry awareness about the causes and consequences of fatigue.     

Hand tool injuries at work: A surveillance perspective

This paper reports results of a surveillance study of work injuries caused by power and nonpower hand tools. Analyzing 129,399 case reports of hand tool injury compensation claims from the 1983 Supplementary Data System of the Bureau of Labor Statistics, the authors determined that nonpower hand tool injury rates were highest in agriculture, followed by construction, mining, and retail trades. For power hand tool injury rates, the order was: construction, agriculture, manufacturing, and mining. Among nonpower hand tools, hand knives were prominent, causing large proportions of injuries to workers in the food preparation occupations and farm laborers. Power hand tool injuries were most often associated with saws, which accounted for large proportions of injuries to lumbermen, carpenters, and miscellaneous laborers. Most injuries could be described as acute trauma involving upper extremities, but musculoskeletal injuries were also documented in substantial numbers. The authors provide suggestions for focused investigations to follow the surveillance effort reported here.     

Fewer workers' compensation claims and lower claim costs if employers with high injury rates achieved the rates of their safer peers

Introduction: Employers engaged in similar business activities demonstrate a range of workers' compensation claim rates. Workplace injuries and illnesses could be prevented if employers with high claim rates achieved the claim rates of their safer peers. Methods: We used Washington workers' compensation claims data for years 2013–2015 to calculate rates of compensable claims (eligible for disability or time loss benefits, if unable to work four days after injury) and total accepted claims (compensable plus medical-aid only claims) for each employer. We estimated the number and cost of claims to occur if employers with high claim rates reduced them to the rates of employers at the 25th percentile, adjusted for insurance risk class, employer size, and injury type. To evaluate the impact of setting more or less ambitious goals, we also estimated reductions based on claim rates at the 10th and 50th percentiles. Results: Over 43% of claims and claim costs would be prevented if employers with higher claim rates lowered them to the 25th percentile using either total accepted or compensable claim rates as the benchmark outcome. The estimated claim cost savings from benchmarking to compensable claims was nearly as great as the estimate based on benchmarking to total accepted claims ($308.5 mil annually based on compensable claims vs. $332.4 mil based on total accepted claims). Restaurants and Taverns had the greatest number of potentially prevented compensable claims. Colleges and Universities and Wood Frame and Building Construction had the greatest potential reduction in compensable claim costs among larger and smaller employers, respectively. Conclusion: Substantial reductions in workers' compensation claims and costs are possible if employers achieve the injury rates experienced by their safer peers. Practical application: Evaluating the range of workplace injury rates among employers within industry groups identifies opportunities for injury prevention and offers another approach to resource allocation.     

Understanding non-industrialized workers' approaches to safety: How do commercial fishermen “stay safe”?

BACKGROUND: Commercial fishing is carried out worldwide, often in non-industrialized forms, and is associated with high rates of fatal and non-fatal occupational injury. PROBLEM: Fishermen who work independently in non-industrialized settings do not have access to union or industry sponsored safety services and must make their own decisions about safety practices. Learning the meaning of safety for them and the safety measures they employ is important before developing interventions. METHODS: Two fieldworkers conducted in-depth ethnographic interviews with 31 commercial fishermen in North Carolina. Interviews and fieldnotes were analyzed using QSR N5. RESULTS: Fishermen primarily related staying safe to work practices and attitudes. They identified specific safety measures, appropriate gear and boat maintenance, weather decisions, and working cooperatively when ocean fishing. DISCUSSION: The ethnographic research process can produce information about a group's norms of preventive behavior and safety concerns. Knowledge of workers' concepts and practices will inform researchers' inquiries.     

The epidemiology of lawn trimmer injuries in the United States: 2000-2009

IntroductionYard maintenance equipment is potentially dangerous, and some of the more frequency used equipment (e.g., lawn mowers) has been extensively studied. However, the extent of lawn trimmers as a source of injury has not previously been explored.MethodsData from the Consumer Product Safety Commission's National Electronic Injury Surveillance System were used to estimate the number of patients treated in U.S. emergency departments for lawn trimmer-related injuries. Injury rates were calculated according to age, sex, and race, and characteristics of the injury event were determined.ResultsAn estimated 81,907 injuries involving a lawn trimmer occurred from 2000–2009. The incidence generally increased over time. Men, people aged 40–49, and Caucasians were the groups most likely to be injured. The most commonly injured body part was the head, specifically the eye, accounting for 42.5% of the injuries. Contusions and abrasions were the most common type of injury to the head, but lacerations were the most common injury to the extremities, and strains/sprains were the most common injury to the trunk.DiscussionAlthough previous research on lawn trimmers has focused exclusively on injuries to the eyes, the results of the current study show that such injuries are one component of the problem. Because most of the injuries were due to foreign objects, it is important that the use of adequate safety gear be emphasized when operating lawn trimmers.Impact on IndustryResults suggest that lawn trimmer design changes and better safety education for trimmer use can reduce the rate of injury and reverse the current trend.     

Self-reported incidents,accidents, and use of protective gear among small-scale forestry workers in Sweden

Self-reported data were collected from 156 self-employed small-scale forestry workers regarding their work, including use of safety gear and number and type of incidents and accidents. About 40% of the respondents reported that during the previous 24 months they had some kind of work-related accident where an injury occurred, and/or experienced in incident, a close call that could have resulted in an injury. Of those injured or involved in an accident, 50% reported that at the time of the accident or incident they were not fully using their safety gear. Sixty-seven percent of the accident victims reported seeking medical attention for their injuries. No significant relationships were found between production level, age, use of safety gear or sensation seeking tendencies and the reports of accidents and incidents. Accidents and incidents were most likely to occur during felling, thinning and transportation activities and were usually caused by unforeseen interactions with falling trees/branches or equipment. Compared to earlier surveys of Swedish small-scale forestry workers, consistent use of all required safety gear was down by 10% to 50%. Protective pants and gloves were the items least likely to be used while ear, eye and foot protection were most likely to be used. The results indicate that better planning during felling processes may be the key to reducing the number of accidents for this population.     

The impact of a peer-led participatory health and safety training program for Latino day laborers in construction

Background

Immigrant Latino day laborers working in residential construction are at particularly high risk of fatal and non-fatal traumatic injury and benefit from targeted training.

Objective

To understand the impact of a participatory, peer-facilitated health and safety awareness training customized to the needs of Latino day laborers.

Methods

Baseline surveys exploring exposures, PPE use, attitudes, work practices and work-related injuries were collected from more than 300 New Jersey Latino day laborers in construction prior to their participation in a one day (minimum of six hour) Spanish language health and safety training class. The classes, led by trained worker trainers, engaged participants in a series of tasks requiring teamwork and active problem solving focused on applying safe practices to situations they encounter at their worksites. Follow-up surveys were difficult to obtain among mobile day laborers, and were collected from 70 men (22% response rate) 2-6 months following training. Chi-square analysis was used to compare pre- and post-intervention PPE use, self protective actions, and self-reported injury rates. Focus groups and in-depth interviews addressing similar issues provided a context for discussing the survey findings.

Results

At baseline, the majority of day laborers who participated in this study reported great concern about the hazards of their work and were receptive to learning about health and safety despite limited influence over employers. Changes from baseline to follow-up revealed statistically significant differences in the use of certain types of PPE (hard hats, work boots with steel toes, safety harnesses, and visible safety vests), and in the frequency of self-protective work practices (e.g., trying to find out more about job hazards on your own). There was also a suggestive decrease in self-reported injuries (receiving an injury at work serious enough that you had to stop working for the rest of the day) post-training based on small numbers. Sixty-six percent of workers surveyed post-training reported sharing information from their safety workbook with friends and co-workers. Focus groups and interview results generally confirmed the quantitative findings.

Conclusions

Participatory, peer led training tailored to the needs of construction day laborers may have a positive effect on Latino immigrant workers’ attitudes, work practices, and self reported injury rates, but major changes would require employer engagement.

Impact on Industry

Health and safety researchers have identified reducing the number of traumatic injuries among the immigrant construction workforce as an increasingly important priority. This project provides one model for collaboration between university-based researchers, a union, and a community-based organization. The specific elements of this project—participatory curriculum customized to the needs of day laborers in residential construction, training day laborers to facilitate training classes, and involving peer leaders in outreach and research—could be adapted by other organizations. The findings of this study suggest that the Latino day laborers have a strong interest in and some ability to act on health and safety information. Widespread implementation of this type of training, especially if supported with cooperation from residential contractors, could lead to reduced rates of traumatic injury in the residential construction industry.     

Work-related deaths in Washington State, 1998-2002

INTRODUCTION: In Washington State, 87 workers are killed each year, on average, while in work status. To understand these incidents and to assist in focusing on and development of potential prevention measures, they must be well characterized. METHODS: Work-related fatalities between the years 1998 and 2002 are described by the demographics of the victims, types of incidents, the victims' occupations, and industries and location in which they worked. RESULTS: Motor vehicle- and machinery-related incidents accounted for nearly 33% and 14% of the incidents, respectively. Agriculture, forestry, fishing, hunting, and mining (n=87), and construction (n=83) had the most fatalities. Fatality rates per 100,000 workers for these industries were 25.7 and 8.7, respectively, compared to the state-wide average of 3.1 fatalities/100,000 workers. DISCUSSION: These data indicate numerous areas for prevention of work-related traumatic injuries and fatalities.     

Epidemiology of occupational acute traumatic hand injuries: a literature review

The purpose of this review was to summarize the literature on occupational, acute, traumatic hand injury and suggest directions for future research. In 1996, the leading occupational injury treated in United States' hospital emergency departments was an acute hand injury (e.g. laceration, crush or fracture). These injuries affected 30% of an estimated 3.3 million injured workers (990,000). Cuts and lacerations of the fingers ranked third after back and leg strains in the number of lost workday cases in the USA in 1994. The incidence rate of hand injuries studied in seven manufacturing environments around the world ranged from 4 to 11 per 100 workers per year. Workers aged 24 years or less had the highest risk of hand injury. Men had higher rates of severe hand injury than women.Despite the high frequency and significant amount of lost work time associated with these injuries, they are poorly understood from an etiological perspective. There is only one case-control study of occupational hand injury in the literature. That study suggested an important role for both fixed (age) and transient risk factors (doing an unusual task) at the time of the injury. More analytic epidemiological research is needed to identify potentially modifiable risk or protective factors (e.g. glove use) for acute hand injuries. In this regard, the case-crossover design, a relatively new epidemiological approach using cases as their own controls, could prove an efficient method for determining transient, modifiable risk factors for acute, occupational hand injury.     

Assessing disabling and non-disabling injuries and illnesses using accepted workers compensation claims data to prioritize industries of high risk for Oregon young workers

Introduction: Young workers are especially vulnerable to occupational injuries and illnesses. There is a continued need to investigate injury burden among young workers across demographics and industry to inform targeted interventions. Workers compensation (WC) claims are important for quantifying work-related injuries and illnesses, however published studies have focused on disabling claims. This study extended previous research on Oregon young workers by including the most recent WC claims data to identify patterns of injury and high risk industries. Methods: We obtained all accepted disabling claims (N = 13,360) and a significant portion of non-disabling claims (N = 24,660) on workers aged 24 years and under from 2013 to 2018. Claim count, rate and cost were calculated by year, age, gender, industry, and injury type. A prevention index (PI) method was used to rank industries in order to inform prevention efforts. Results: Average annual disabling and non-disabling claim rates were 111.6 and 401.3 per 10,000 young workers. Workers aged 19–21 (disabling: 119.0 per 10,000 and non-disabling: 429.3) and 22–24 years (115.7 and 396.4) and male workers (145.3 and 509.0) had higher claim rates than workers aged 14–18 (80.6 and 297.0) and female workers (79.8 and 282.9). The most frequent injury types were “struck by/against” (35.6%) and “work-related musculoskeletal disorders (WMSDs)” (19.5%). High risk industries included agriculture, construction, and manufacturing for both genders combined. For female young workers, the highest risk industry was healthcare. Conclusions: This study demonstrated the added value of non-disabling WC claims data. Using both disabling and non-disabling data and PI method, agriculture, construction, manufacturing and healthcare industries were identified as priority workplaces to prevent common and costly injuries among Oregon young workers. Practical Applications: While the industries identified are considered hazardous for all workers, findings in this study can guide targeted research and prevention efforts specific to young workers.     

An evaluation of the effectiveness of a baby walker safety standard to prevent stair-fall injuries

PROBLEM: During the early 1990s the number of baby walker injuries treated in U.S. hospital emergency departments averaged almost 25,000 annually; about 80% resulted from falls down stairs. After initiating a regulatory proceeding in 1994, the U.S. Consumer Product Safety Commission staff worked with industry to develop requirements to address the stair-fall hazard. This study evaluates the effectiveness of the stair-fall requirements, which became effective in 1997 as part of a revised voluntary standard. METHOD: Annual baby walker emergency department injury rates were constructed for the 1981-2002 study period. A multivariate negative binomial regression model was used to estimate the effectiveness of the stair-fall requirements in reducing the injury rate. RESULTS: The stair-fall requirements reduced the emergency department injury rate by an estimated 63% (95% CI, 52% to 71%). IMPACT ON INDUSTRY: Given the substantial reduction in walker injuries, and the high level of industry conformance with the stair-fall requirements, the Commission terminated its regulatory proceeding in May, 2002. The success of the baby walker project highlights the ability of government and industry to work together cooperatively to develop effective safety improvements for consumer products.     

Prioritizing prevention opportunities in the Washington State construction industry, 2003-2007

Objective

This study compares construction industry groups in Washington State by injury severity and cost, and ranks industry groups according to potential for prevention.

Methods

All Washington State workers' compensation compensable claims with date of injury between 2003 and 2007 were classified into North American Industrial Classification System (NAICS) industry groups. Claims were then aggregated by injury type and industry groups were ranked according to a prevention index (PI). The PI is the average of the rank orders of the claim count and the claim incidence rate. A lower PI indicates a higher need for prevention activities. The severity rate was calculated as the number of days of time loss per 10,000 full-time equivalents (FTEs).

Results

For all injury types, construction industry groups occupy 7 of the top 15 PI ranks in Washington State. The severity rate among construction industry groups was twice that for non-construction groups for all injury types. Foundation, structure, and building exterior contractors (NAICS 2381) ranked highest in prevention potential and severity among construction industry groups for most common injury types including falls from elevation, fall on same level, struck by/against, and musculo-skeletal disorders of the neck, back, and upper extremity (WMSDs). Median claim costs by injury type were generally higher among construction industry groups.

Conclusions

The construction industry in Washington State has a high severity rate and potential for prevention. The methods used for characterizing these industry groups can be adapted for comparison within and between other industries and states.

Impact on Industry

These data can be used by industry groups and employers to identify higher cost and higher severity injury types. Knowledge about the relative frequencies and costs associated with different injury types will help employers and construction industry associations make better informed decisions about where prevention efforts are most needed and may have the greatest impact. The results of this study can also be used by industry stakeholders to cooperatively focus on high cost and high severity injuries and explore best practices, interventions, and solutions as demonstrated by efforts to prevent musculoskeletal disorders in masonry (Entzel, Albers, & Welch, 2007). Initiating construction industry groups to focus on high cost and high severity injuries may also help prevent other types of injuries.     

Consumer product-related eye injury in the United States, 1998-2002

PROBLEM: Eye injury is currently a leading cause of visual impairment and monocular blindness in the United States. Information regarding consumer products associated with eye injuries can have important implications for the prevention of these injuries. METHODS: The National Electronic Injury Surveillance System (NEISS) was used to describe the types of consumer products associated with emergency department treated eye injuries in the United States from 1998 through 2002. RESULTS: The leading product type associated with eye injuries was welding equipment followed by household cleaners, basketball equipment, workshop equipment, and adhesives. Eye injuries attributed to hardware, tools, construction, sports, toys, and lawn equipment were more common among males. In females, eye injuries attributable to chemicals, housewares, storage and organization, and bed and bath items were more common. Differences were also apparent across the age spectrum. CONCLUSION: This study identified specific products and categories of products frequently associated with eye injury and prevention initiatives should focus on these items. IMPACT ON INDUSTRY: This study has identified consumer products associated with eye injuries requiring medical treatment in the United States. Manufacturers of these products could be encouraged to add or strengthen safety messages regarding the potential for eye injury.     

Sport participation and injury rates in high school students: A Canadian survey of 2029 adolescents

Introduction: The objective of this study is to examine sport and recreational (S&R) activity participation and injury rates (IR) in high school students (ages 14–19). Methods: High school students (N = 24 schools, n = 2,029; 958 male, 1,048 female, 23 identified ‘other’ or missing; ages 14–19) in Alberta completed a web-based survey during class (October 2018–March 2019). Students identified their top three sports for participation in the past year. Primary outcome measures included IR for (a) any S&R-related injury, (b) most serious S&R-related injury resulting in medical attention, and (c) most serious injury resulting in restriction from S&R for at least one day. Results: In total, 1763/2029 (86.89%) respondents [861/958 (89.87%) male, 886/1048 (84.54%) female, 16/23 (69.57%) identifying as ‘other’ or missing] participated in an S&R activity in the past year. Top sports for male participation were basketball (33.08%; 95% CI 27.67–39.00), ice hockey (20.46%; 95% CI 14.87–27.47), and soccer (19.42%; 95% CI 15.67–23.80). Top sports for female participation were dance (22.52%; 95% CI 17.98–27.82), basketball (18.32%; 95% CI 14.32–23.14), and badminton (17.84%; 95% CI 13.35–23.43). Of the 1,971 students completing the S&R injury question, 889 reported at least one injury during the past year [(IR = 45.10 injuries/100 students/year (95% CI 39.72–50.61)]. The medical attention IR was 29.09 injuries/100 students/year (95% CI 24.49–34.17) and time loss IR was 36.00 injuries/100 students/year (95% CI 30.47–41.93). Conclusions: High school student S&R IRs are high with 29% of adolescents reporting at least one medical attention injury within the past year. Injury prevention strategies targeting youth are necessary. Practical Application: Participation in S&R activities has multiple physical, psychological, and health benefits for adolescents, but some S&R activities also have greater risks of injury. This study informs the next sports to target for implementation of optimal prospective surveillance and injury prevention strategies among high school aged students.     

Probability of death,disability, and restricted work activity in United States underground bituminous coal mines, 1975–1981

This study examined relationships between mine and miner characteristics and severity of 82,945 underground bituminous coal mine injuries using logistic regression techniques. Injuries were classified as severe if they resulted in death, disability, or restricted work activity. Supervisory and maintenance personnel were found to have fewer chances of severe injuries than “all other” job classifications. A shaft or slope had a lower association with severe injuries than the face. The probability of a severe injury increased each succeeding year from 1975 through 1981. Mining method was not related to degree of injury. Older miners had the same probability of severe injuries as younger miners. Weeks of experience in mining, on a particular job, and in a specific mine were not related to severity of injuries. Mobile equipment operators had the same chance of severe injuries as miners in “all other” job classifications. Accidents at intersections and “other” locations were as likely to produce severe injuries as those at the face. Elapsed shift time prior to an injury was not related to injury severity. The implications of these findings are discussed and recommendations made for future research.     

Fall from equipment injuries in U.S. mining: Identification of specific research areas for future investigation

Introduction

The objective of this study was to evaluate the circumstances leading to fall from equipment injuries in the mining industry.

Method

The 2006 and 2007 Mine Safety and Health Administration annual injury databases were utilized for this study whereby the injury narrative, nature of injury, body part injured, mine type, age at injury, and days lost were evaluated for each injury.

Results

The majority of injuries occurred at surface mining facilities (∼ 60%) with fractures and sprains/strains being the most common injuries occurring to the major joints of the body. Nearly 50% of injuries occurred during ingress/egress, predominately during egress, and approximately 25% of injuries occurred during maintenance tasks. The majority of injuries occurred in relation to large trucks, wheel loaders, dozers, and conveyors/belts. The severity of injury was independent of age and the median days lost was seven days; however, there was a large range in severity.

Impact on industry

From the data obtained in this study, several different research areas have been identified for future work, which include balance and stability control when descending ladders and equipment design for maintenance tasks.