The historical record of PCB and PCDD/F deposition at Greifensee, a lake of the Swiss plateau, between 1848 and 1999

Dated sediment cores provide an excellent way to investigate the historical input of persistent organic pollutants into the environment and to identify possible sources of pollution. The vertical distribution of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/F) and polychlorinated biphenyls (PCB) was investigated in a sediment core from Greifensee to elucidate the historical trends of PCDD/F and PCB inputs between 1848 and 1999. Concentrations of PCB and PCDD/F increased by more than one order of magnitude between 1930 and 1960. PCB and PCDD/F concentrations were 5700 ng/kg dry weight (dw) and 160 ng/kg dw, respectively, in sediments originating from the late 1930s and reached a maximum of 130,000 ng/kg dw and 2400 ng/kg dw, respectively, in the early 1960s. From 1960 on, concentrations decreased to the 1930s level by the mid 1980s. A remarkable shift in the PCDD/F pattern was observed after the early 1940s. Before 1940, the PCDD/F pattern was PCDF dominated (ratio of PCDD to PCDF=0.41+/-0.11), while the PCDD started to be the major species after the early 1940s (ratio of PCDD to PCDF=1.46+/-0.38). The temporal trends of PCB and PCDD/F correlate surprisingly well with each other. This might be due to the coincidence of two factors. The introduction of PCB on the market in the 1930s resulted in emissions due to the widespread use of these industrial chemicals. In the same time period, waste incineration became an increasingly popular way to get rid of garbage, boosting the PCDD/F emissions significantly. The rapid decline of PCDD/F and PCB concentrations in the sediment starting in the early 1960s reflects the result of better emission control techniques in thermal processes and the improvement of waste water treatment in the catchment of Greifensee.     

A historical record of trace metal deposition in northeastern Qinghai-Tibetan Plateau for the last two centuries

Environmental Science and Pollution Research - Owing to rapid socio-economic development in China, trace metal emissions have increased and lakes even in remote areas have experienced marked...     

A high-resolution historical sediment record of nutrients,trace elements and organochlorines (DDT and PCB) deposition in a drinking water reservoir (Lake Brêt,Switzerland) points at local and regional pollutant sources

The ¹³⁷Cs and ²¹⁰Pb dating of a 61-cm long sediment core retrieved from a drinking water reservoir (Lake Brêt) located in Switzerland revealed a linear and relatively high sedimentation rate (～1 cm year^?1) over the last decades. The continuous centimeter scale measurement of physical (porewater and granulometry), organic (C_org, P, N, HI and OI indexes) and mineral (C_min and lithogenic trace elements) parameters therefore enables reconstructing the environmental history of the lake and anthropogenic pollutant input (trace metals, DDT and PCBs) at high resolution. A major change in the physical properties of the lowermost sediments occurred following the artificial rise of the dam in 1922. After ca. 1940, there was a long-term up-core increase in organic matter deposition attributed to enhance primary production and anoxic bottom water conditions due to excessive nutrient input from a watershed predominantly used for agriculture that also received domestic effluents of two wastewater-treatment plants. This pattern contrasts with the terrigenous element input (Eu, Sc, Mg, Ti, Al, and Fe) which doubled after the rising of the dam but continuously decreased during the last 60 years. By comparison, the trace metals (Cu, Pb and Hg) presented a slight enrichment factor (EF) only during the second part of the 20th century. Although maximum EF Pb (>2) occurred synchronously with the use of leaded gasoline in Switzerland (between ca. 1947 and 1985) the Hg and Cu profiles exhibited a relatively similar trend than Pb during the 20th century, therefore excluding the alkyl-lead added to petrol as the dominant (atmospheric) source of lead input to Lake Brêt. Conversely, the Cu profile that did not follow the decrease registered in Pb and Hg during the last 10 years, suggests an additional source of Cu probably linked to the impact of agricultural activities in the area. In absence of heavy industries in the catchment, the atmospheric deposition of DDT and PCBs via surface runoff followed the historical emissions of POPs in Switzerland. Such result highlights the regional contamination of freshwater resources by the large-scale emission of toxic industrial chemicals in the 1960s and 1970s as well as the efficiency of the regulatory measures subsequently taken.     

Response of lake sediments to changes in trace metal emission from the smelters at Sudbury, Ontario

Historical records preserved in sediments show that the lakes are extremely sensitive to metal emissions from the smelters in the Sudbury basin. From the observed quick response, a strong capacity for rapid recovery (deacidification) of acid-stressed lakes in the area is deduced. The study thus emphasises the need for curtailing the emissions of acidic and acidifying substances as a critical step in reducing lake acidification as well as in rehabilitating many of the afflicted lakes.     

Observations of particle growth at a remote,Arctic site

Observations of particle size distributions suggest that particles grow significantly just above the snow surface at a remote, Arctic site. Measurements were made at Summit, Greenland (71.38°N and 31.98°W) at approximately 3200 m above sea level. No new particle formation was observed locally, but growth of ultrafine particles was identified by continuous evolution of the geometric mean diameter (GMD) during four events. The duration of the growth during events was between 24 and 115 h, and calculated event-average growth rates (GR) were 0.09, 0.30, 0.27, and 0.18 nm h^?1 during each event, respectively. Four-hour GR up to 0.96 nm h^?1 were observed. Events occurred during below- and above-average temperatures and were independent of wind direction. Correlation analysis of hourly-calculated GR suggested that particle growth was limited by the availability of photochemically produced precursor gases. Sulfuric acid played a very minor role in particle growth, which was likely dominated by condensation of organic compounds, the source of which was presumably the snow surface. The role of boundary layer dynamics is not definite, although some mixing at the surface is necessary for the observation of particle growth. Due to the potentially large geographic extent of events, observations described here may provide a link between long-range transport of mid-latitude pollutants and climate regulation in the remote Arctic.     

Polycyclic aromatic hydrocarbon (PAH) deposition to and exchange at the air-water interface of Luhu, an urban lake in Guangzhou, China

Urban lakes are vulnerable to the accumulation of semivolatile organic compounds, such as PAHs from wet and dry atmospheric deposition. Little was reported on the seasonal patterns of atmospheric deposition of PAHs under Asian monsoon climate. Bulk (dry + wet) particle deposition, air-water diffusion exchange, and vapour wet deposition of PAHs in a small urban lake in Guangzhou were estimated based on a year-round monitoring. The total PAH particle deposition fluxes observed were 0.44-3.46 μg m⁻² day⁻¹. The mean air-water diffusive exchange flux was 20.7 μg m⁻² day⁻¹. The vapour deposition fluxes of PAHs ranged 0.15-8.26 μg m⁻² day⁻¹. Remarkable seasonal variations of particulate PAH deposition, air-water exchange fluxes and vapour wet deposition were influenced by seasonal changes in meteorological parameters. The deposition fluxes were predominantly controlled by the precipitation intensity in wet season whereas by atmospheric concentration in dry season.     

Organochlorine, PCB, PAH, and metal concentrations in eggs of loggerhead sea turtles (Caretta caretta) from northwest Florida, USA

Composite samples of unhatched and physically unaltered loggerhead sea turtle, Caretta caretta, eggs collected from 20 nests along northwest Florida were analyzed for organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and metals. Chemical analyses revealed that turtle eggs contained detectable amounts of metals, PAHs, and PCBs. Only one OCP, p,p'-DDD, was detected, and its presence was restricted to eggs from two nesting sites. None of the PCB concentrations exceeded the Food and Drug Administration's (FDA) action limit. Concentrations of dioxin-like PCB congeners, 105, 118, and 126, and total PCBs were also detected and are contributors to the toxic burden of loggerhead sea turtle eggs. Concentrations of PAHs, 1,2,5,6-dibenzanthracene, 1-methyl naphthalene, C1-naphthalene and naphthalene were variable at nesting sites. Comparison of mean metal burdens in eggs from different beaches suggested that no uniform geographic gradients exist. Presence of OCPs, PCBs, PAHs and metals and their additive or synergistic toxicity is a concern to loggerhead sea turtle eggs; however, additive or synergistic impacts for loggerhead sea turtles are largely undocumented.     

Organochlorine,PCB, PAH,and metal concentrations in eggs of loggerhead sea turtles (Caretta caretta) from northwest Florida,USA

Abstract

Composite samples of unhatched and physically unaltered loggerhead sea turtle, Caretta caretta, eggs collected from 20 nests along northwest Florida were analyzed for organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and metals. Chemical analyses revealed that turtle eggs contained detectable amounts of metals, PAHs, and PCBs. Only one OCP, p, p'‐DDD, was detected, and its presence was restricted to eggs from two nesting sites. None of the PCB concentrations exceeded the Food and Drug Administration's (FDA) action limit. Concentrations of dioxin‐like PCB congeners, 105, 118, and 126, and total PCBs were also detected and are contributors to the toxic burden of loggerhead sea turtle eggs. Concentrations of PAHs, 1,2,5,6‐dibenzanthracene, 1‐methyl naphthalene, Cl‐naphthalene and naphthalene were variable at nesting sites. Comparison of mean metal burdens in eggs from different beaches suggested that no uniform geographic gradients exist. Presence of OCPs, PCBs, PAHs and metals and their additive or synergistic toxicity is a concern to loggerhead sea turtle eggs; however, additive or synergistic impacts for loggerhead sea turtles are largely undocumented.     

Characteristics and impacts of trace elements in atmospheric deposition at a high-elevation site,southern China

To investigate the regional background trace element (TE) level in atmospheric deposition (dry and wet), TEs (Fe, Al, V, Cr, Mn, Ni, Cu, Zn, As, Se, Mo, Cd, Ba, and Pb) in 52 rainwater samples and 73 total suspended particles (TSP) samples collected in Mt. Lushan, Southern China, were analyzed using inductively coupled plasma-mass spectrometry (ICP-MS). The results showed that TEs in wet and dry deposition of the target area were significantly elevated compared within and outside China and the volume weight mean pH of rainwater was 4.43. The relative contributions of wet and dry depositions of TEs vary significantly among elements. The wet deposition fluxes of V, As, Cr, Se, Zn, and Cd exceeded considerably their dry deposition fluxes while dry deposition dominated the removal of pollution elements such as Mo, Cu, Ni, Mn, and Al. The summed dry deposition flux was four times higher than the summed wet deposition flux. Prediction results based on a simple accumulation model found that the content of seven toxic elements (Cr, Ni, Cu, Zn, As, Cd, and Pb) in soils could increase rapidly due to the impact of annual atmospheric deposition, and the increasing amounts of them reached 0.063, 0.012, 0.026, 0.459, 0.076, 0.004, and 0.145 mg kg^?1, respectively. In addition, the annual increasing rates ranged from 0.05% (Cr and Ni) to 2.08% (Cd). It was also predicted that atmospheric deposition induced the accumulation of Cr and Cd in surface soils. Cd was the critical element with the greatest potential ecological risk among all the elements in atmospheric deposition.     

The effect of oils on PAH, PCDD, PCDF, and PCB emissions from a spark engine fueled with leaded gasoline

The effect of synthetic and mineral oils on the formation of polyaromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs) in emissions from a spark ignition engine was studied on a Skoda Favorit engine fueled with leaded gasoline. The test cycle simulated urban traffic conditions on a chassis dynamometer, in accordance with the ECC 83.00 test. The data for selected PAHs as well as PCDDs, PCDFs, and PCBs congener profiles are presented. PCDD/Fs emissions for an unused oil and the oil after 10000-km operation varied from 300 to 2000 fmol/m3, PCBs emissions from 75 to 178 pmol/m3, and PAHs emissions from 150 to 420 microg/m3. The content of PCBs in oils varied from 2 to 920 mg/kg.     

Mechanisms of trace element deposition from the free atmosphere to surfaces in a remote High Sierra Canyon

Field experiments to determine size distributions and deposition rates of airborne K, Rb, Cs, Ca, Sr, Ba, and Pb were conducted in Thompson Canyon, California (elevation 3000 m) during 1976 and 1977 in order to study deposition mechanisms at this remote site. The data suggest that sedimentation accounts for most of the deposition of the first six elements on smooth, flat surfaces in winds of 2 m s⁻¹, but that turbulent inertial deposition becomes more important at greater windspeeds. Pb is found in smaller particle sizes and is less influenced by sedimentation. The data and associated calculations also suggest that inertial impaction plays a dominant role in transporting these elements to pine needle surfaces in the canyon.     

Reconstructing historical trends of polycyclic aromatic hydrocarbon deposition in a remote area of Spain using herbarium moss material

Herbarium mosses from 1879–1881, 1973–1975 and 2006–2007 were used to investigate the historical changes of atmospheric deposition of polycyclic aromatic hydrocarbons (PAHs) at a remote site in Northern Spain. Natural abundance of nitrogen and carbon isotopes was also measured in order to assess the evolution of emissions from anthropogenic sources. Nitrogen and PAH concentrations as well as δ¹³C and δ¹⁵N ratios were significantly higher in 19th century samples compared to present century samples. Moreover, PAH distribution varied over the centuries, with the trend towards enrichment in light PAHs. The carbon, nitrogen and PAH concentrations measured in the mosses tally with the historical evolution of anthropogenic emissions in the area, mainly influenced by changes in economic activities, domestic heating and road traffic density. Mosses provided by herbaria seem to offer the possibility of studying long-term temporal evolution of atmospheric PAH deposition.     

Changes in trace metal concentrations in lake water and biota during experimental acidification of Little Rock Lake, Wisconsin, USA

Little Rock Lake, a small (18 ha), low-alkalinity (25 microeq litre(-1), pH 6.1) seepage lake in northern Wisconsin, was divided into two basins by a flexible, inert barrier and, beginning in spring 1985, the north basin was acidified in three 2-year steps to pH 5.6, 5.1 and 4.7. The annual average pH of the reference basin remained near 6.1. As part of a comprehensive programme to determine the chemical and biological responses to acidification, minor metals (Al, Fe, Mn) and trace metals (Cd, Cu, Pb, Zn) in lake water (0.4 microm pore filtered samples), periphyton, zooplankton, and yellow perch (Perca flavescens) were measured. At pH 5.6, dissolved Mn and Fe increased in the acidified basin. At pH 5.1 and 4.7, dissolved Al, Fe, Mn, Cd and Zn were elevated in the acidified basin. At pH 4.7, dissolved Pb in the acidified basin became elevated over reference basin levels. Dissolved Cu remained similar in both basins down to pH 4.7. Cd burdens in periphyton collected on artificial substrates were lower in the treatment basin at pH 5.1 (1.8 microg g(-1) dry wt.) than in the reference basin at pH 6.1 (7.5 microg g(-1) dry wt.), but Al and Fe burdens in periphyton were similar in both basins. Likewise, Cd levels in muscle tissue of perch from the treatment basin at pH 4.7 were lower (26 ng g(-1) dry wt.) than in the reference basin at pH 6.1 (36 ng g(-1) dry wt.); Al and Fe burdens were similar in perch muscle tissue from both basins. Levels of Cd and Fe in zooplankton from the acidified basin at pH 4.7 were approximately equal to 2x higher than in animals from the reference basin. In both basins of the lake, Al and Cd levels in lake biota decreased with increasing trophic level, demonstrating that food chain biomagnification does not occur for these metals.     

Dynamics of PAH deposition, cycling and storage in a mixed-deciduous (Quercus-Fraxinus) woodland ecosystem

Estimates of standing biomass and fluxes of biomass in a mixed-deciduous woodland were derived, and used with results for concentrations of seven polycyclic aromatic hydrocarbons (PAHs) in different compartments of the woodland system to quantitatively assess some of the key fluxes and burdens of PAHs in this complex system. We quantified PAH burdens in air, in leaves of three deciduous tree species, in leaf litter and in soil, and uptake of PAHs by the tree leaves; PAH fluxes in litterfall, and deposition to the litter layer on the woodland floor during winter were calculated from these data. Air burdens exhibited marked seasonal variations for all compounds, with lowest values in summer when combustion-related emissions were low. Leaves did not accumulate large burdens of PAHs while on the trees and consequently, litterfall-associated fluxes of PAHs were small, representing only a fraction of the burdens in the litter layer to which they were deposited. Higher PAH burdens in air in winter, combined with the organic-matter-rich nature of the litter layer, are thought to be responsible for fluxes of PAHs to the litter layer in winter being 20-170 times the peak litterfall fluxes. The soil compartment was calculated to contain 25 years' worth of deposition of benzo[ghi]perylene, the most recalcitrant PAH in this study. Storage quotients for fluoranthene, pyrene, benzo[k]fluoranthene and benzo[a]pyrene burdens in soil represented 7-10 years' worth of deposition, while fluorene and phenanthrene storage in soil approached unity with inputs (1 and 3 years' worth of deposition, respectively). The relative importance of storage and loss processes was therefore closely related to the physico-chemical properties of the PAH, and is discussed in relation to the cycling of carbon in the woodland.     

The Pb pollution fingerprint at Lochnagar: the historical record and current status of Pb isotopes

Ratios of 206Pb/207Pb in a Lochnagar sediment core slowly decline from c. 1.32 at 140 cm to c. 1.23 at 9 cm, and then rapidly decline to c. 1.15 at the surface. Ninety percent of the Pb in the surface sediments can be attributed to anthropogenic sources. The 206Pb/207Pb ratio data imply that catchment peat surface contains a higher fraction of anthropogenic Pb than the sediment surface. The 206Pb/207Pb ratios in the surface of the sediment core are consistent with ratios in trapped sediments collected annually between 1998 and 2003. However, there is no significant decline in these recent samples suggesting that the reduction in atmospheric Pb emissions has not yet been recorded by the sediments due to Pb inputs from the catchment. As catchment peats store about 840 kg previously deposited anthropogenic Pb since 1860, it is likely that catchment inputs will continue to affect future 206Pb/207Pb ratios.     

PCDD/F and PCB history in dated sediments of a rural lake

Concentrations of polychlorinated dibenzo-p-dioxins (PCDD), dibenzofurans (PCDF) and biphenyls (PCB) were analysed from a sediment core, which had been sampled from a remote lake in Finland. The deepest subsamples were analysed from a depth of 4.0 m, and were more than 8000 years old. At the surface of the sediment core, low levels of industrial background contamination were detected. The sum of 2,3,7,8-substituted PCDD/Fs was 35 ng/kg d.w. (dry weight), or 1.2 ng/kg d.w. in WHO's toxicity equivalent, WHO-TEQ. The annual accumulation rate of 2,3,7,8-substituted PCDD/Fs was 1.26 ng m(-2) a(-1). Deeper in the core, PCDD/F concentrations ranged between 2.11 and 11.1 ng/kg d.w. (0.24 and 1.70 ng/kg d.w. WHO-TEQ) and the accumulation rate was 0.11 ng m(-2) a(-1). A characteristic PCDD/F congener profile was found in all pre-industrial sediment layers. The order of concentrations was OCDD > 1,2,3,4,6,7,8-HpCDD > 1,2,3,7,8,9-HxCDD > 1,2,3,4,7,8-HxCDD > 2,3,7,8-TCDD, and concentrations of 2,3,7,8-chlorinated dibenzofurans were below the detection limit. Similar congener profiles have previously been described in samples for which natural PCDD/F formation has been proposed. PCBs were present at low levels in all of the sediment samples. The sum of the PCB concentrations of the sediment subsamples ranged between 50 and 2540 ng/kg d.w., and the three predominant congeners in the core were PCBs 18, 52, and 110.     

Routine analysis of hydrocarbons, PCB and PAH in marine sediments using supercritical CO2 extraction

Automated Supercritical Fluid Extraction (SFE), using CO2, was tested and optimised for routine analysis of hydrocarbons (THC), polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH) in marine sediments. The aim of the exercise was to reduce the amount of solvents used and to reduce the manual handling time for each sample. The sediments contained elemental sulphur, which was removed during the extraction step using activated Cu. Similar recoveries and reproducibility where found for THC when conventional solvent extractions and SFE where compared. Modifying the CO2 with methanol was necessary to obtain extraction recoveries similar to conventional extraction methods for PCB and PAH.     

Storage and distribution of trace metals and spheroidal carbonaceous particles (SCPs) from atmospheric deposition in the catchment peats of Lochnagar, Scotland.

Lochnagar is a remote mountain lake to the south-east of the Cairngorm region in Scotland. Its catchment receives anthropogenic trace metals solely from atmospheric deposition. Ten peat cores were taken from the catchment and analysis confirmed that they have been contaminated by trace metals. The peats have an high affinity for trace metals and this results in metal accumulation in the surface peat layers. The formation of trace metal sulphides may also reduce remobilisation. In this way, trace metals derived from atmospheric deposition have been scavenged and accumulated. In contaminated peat layers, 77.4% Hg, 89.6% Pb, 93.4% Cu, 72.4% Zn and 86.5% Cd of the total stored are from anthropogenic sources. The accumulated trace metals in the peats can potentially influence the lake system through erosion. Spheroidal carbonaceous particle (SCP) profiles were used to date the peat cores. By referring to the SCP profiles in the peats and comparing these with the trace metal profiles in the lake sediments, the mobility of trace metals in the catchment peats is confirmed.     

Spatial distribution and source identification of wet deposition at remote EANET sites in Japan

Wet deposition of major ions was discussed from the viewpoint of its potential sources for six remote EANET sites in Japan (Rishiri, Happo, Oki, Ogasawara, Yusuhara, and Hedo) having sufficiently high data completeness during 2000–2004. The annual deposition for each site ranged from 12.1 to 46.6 meq m⁻² yr⁻¹ for nss-SO₄²⁻, from 5.0 to 21.9 meq m⁻² yr⁻¹ for NO₃⁻. The ranges of annual deposition of the two ions for the sites were lower than those for urban and rural sites in Japanese Acid Deposition Survey by Ministry of the Environment, Japan, and higher than those for global remote marine sites. Factor analysis was performed on log-transformed daily wet deposition of major ions for each site. The obtained two factors were interpreted as (1) acid and soil source (or acid source for some sites), and (2) sea-salt source for all the sites. This indicates that wet deposition of ions over the remote areas in Japan has a similar structure in terms of types of sources. Factor scores of acid and soil source were relatively high during Kosa (Asian dust) events in spring in western Japan. Back-trajectories for high-deposition episodes of acid and soil source (or acid source) for the remote sites showed that episodic air masses frequently came from the northeastern area of Asian Continent in spring and winter, and from central China in summer and autumn. This indicates a large contribution of continental emissions to wet deposition of ions over the remote areas in Japan.     

Persistent organic pollutants in atmospheric deposition and biomonitoring with Tillandsia usneoides (L.) in an industrialized area in Rio de Janeiro state, southeast Brazil--Part II: PCB and PAH

Monitoring of immission of persistent organic pollutants in the industrialized area of Volta Redonda (V.R.) and in the National Park of Itatiaia (PNI) in southeast Brazil was performed using an endemic bromeliad species as biomonitor and measuring bulk deposition rates of polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH). For the sum of PCB, overall deposition rates were between 17 and 314 ng/(m2 day) in winter and between 43 and 81 ng/(m2 day) in summer, respectively. Deposition rates of dioxin-like PCBs ranged from 0.14 to 2.8 pg WHO-TEQ/(m2 day) in winter and from 0.90 to 4.3 pg WHO-TEQ/(m2 day) in summer. PCB deposition rates (total PCB and WHO-TEQ) were in the same range in winter in V.R. and PNI. In summer, contamination levels in V.R. were 6-10-folds higher than in PNI. PCB concentrations in biomonitor samples from V.R. and PNI were in the same range in summer and in winter. Concentrations of total PCB ranged from 14 to 95 microg/kg dry matter (d.m.) in winter and from 18 to 27 microg/kg d.m. in summer, respectively. The TEQ values were between 1.7 and 4.1 ng WHO-TEQ/kg d.m. in winter and between 1.9 and 2.9 ng WHO-TEQ/kg d.m. in summer. PCB concentrations of di-ortho PCB but not of non-ortho PCB were a factor of 2-4 lower in summer in both areas. PCB congener profiles resembled those from technical formulations. The profiles shifted to the higher chlorinated congeners in summer, probable due to revolatilisation of the lighter components at higher temperatures. PCB profiles in biomonitor resembled those from deposition samples and the shift to the heavier congeners in summer was even more pronounced. PAH deposition rates were in a similar range in both areas (131-2415 ng/(m2 day)). PAH levels in biomonitor samples from V.R. were about one order of magnitude higher than in samples from PNI indicating the impact of local sources. PAH profiles revealed stationary thermal processes as main source of contamination in V.R. whereas in PNI, biomass burning seems to be the main contamination source.