The influences of pH and ionic strength on the sorption of tylosin on goethite

As one of the widely used antibiotics in the world, the environmental risks of tylosin (TYL) received more and more attention. In order to assess its environmental fate and ecological effects accurately, it is necessary to understand the sorption properties of TYL on the soils/sediments. The sorption of TYL on goethite at different pH and ionic strength conditions were measured through a series of batch experiments and the sorption data of TYL were fitted by Freundlich and dual-mode sorption models. It was obvious that sorption was strongly dependent on pH and ionic strength. Sorption capacity of TYL increased as the pH increased and ionic strength decreased. The pH and ionic strength-dependent trends might be related with complexation between cationic/neutral TYL species and goethite. The sorption affinity of TYL on goethite decreased as ionic strength increased, which only occurred at higher TYL concentrations, suggested that inner complex might have dominated process at low concentrations and outer complex might occur at higher concentrations of TYL. Spectroscopic evidence indicated that tricarbonylamide and hydroxyl functional groups of TYL might be accounted for the sorption on mineral surfaces. The experimental data of TYL sorption could be fitted by surface complexation model (FITEQL), indicating that ≡FeOH with TYL interaction could be reasonably represented as a complex formation of a monoacid with discrete sites on goethite. The sorption mechanism of TYL might be related with surface complexation, electrostatic repulsion, and H-bounding on goethite. It should be noticed that the heterogeneous of sorption affinity of TYL on goethite at various environment to assess its environment risk.     

Behavior of Chlorpyrifos-methyl in soil and sediment

This research was carried out with the aim of obtaining information regarding the possible environmental impact of Chlorpyrifos-methyl, an organophosphoric insecticide used in agriculture for its phytoiatric action against Hemiptera, Lepidoptera, Coleoptera, and Diptera. Studies relating to the degradation kinetics of the insecticide in two soils and one sediment have shown a rapid degradation process in all three. The prevalent form of degradation would appear to be the chemical type, because the degradation kinetics in a sterile soil have not demonstrated that micro-organisms play a significant part. The adsorption isotherms showed that the insecticide has a greater affinity for the sediment (Kf=143) as opposed to the soils (Kf=65) and that the adsorption process is practically irreversible. Moreover, hydrolysis tests in buffered solutions at pH 4, 7, and 9 revealed that the molecule is particularly unstable with a basic pH.     

针铁矿对Pb~(2+)的吸附特征及影响因素研究

通过恒温振荡平衡法研究了Pb~(2+)在针铁矿上的等温吸附和吸附动力学特征,探讨了吸附的影响因素.结果表明:(1)随Pb~(2+)平衡浓度和pH的增大,针铁矿对Pb~(2+)的吸附量逐渐增大.(2)针铁矿对Pb~(2+)的等温吸附可用Freundlich和Langmuir方程较好地拟合.(3)在相同温度和pH下,随离子强度的提高,针铁矿对Pb~(2+)的吸附量增大.(4)在相同离子强度和pH下,针铁矿对Pb~(2+)的吸附量总体随温度升高而增大.针铁矿对Pb~(2+)的吸附是自发进行的吸热反应.(5)针铁矿吸附Pb~(2+)的过程可分为初始的快吸附和随后的慢吸附2个阶段.pH影响吸附反应快慢,随pH增大吸附速率增大;随着pH的增大,达到平衡吸附的时间缩短.吸附动力学方程用Elovich方程拟合最佳.     

Principles of microbial PAH-degradation in soil

Interest in the biodegradation mechanisms and environmental fate of polycyclic aromatic hydrocarbons (PAHs) is motivated by their ubiquitous distribution, their low bioavailability and high persistence in soil, and their potentially deleterious effect on human health. Due to high hydrophobicity and solid-water distribution ratios, PAHs tend to interact with non-aqueous phases and soil organic matter and, as a consequence, become potentially unavailable for microbial degradation since bacteria are known to degrade chemicals only when they are dissolved in water. As the aqueous solubility of PAHs decreases almost logarithmically with increasing molecular mass, high-molecular weight PAHs ranging in size from five to seven rings are of special environmental concern. Whereas several reviews have focussed on metabolic and ecological aspects of PAH degradation, this review discusses the microbial PAH-degradation with special emphasis on both biological and physico-chemical factors influencing the biodegradation of poorly available PAHs.     

Mutual effects of cadmium and phosphate on their adsorption and desorption by goethite

Adsorption of cadmium (Cd) and phosphate by oxides or soils has been extensively studied, but the adsorption/desorption kinetics and mutual effects of these two species in co-existing systems has received little attention. In this study, a batch equilibration method was used to investigate the effect of phosphate and its application time on Cd adsorption and desorption on goethite. The influence of Cd and its application time on phosphate sorption and desorption kinetics was also determined. For Cd adsorption, phosphate was introduced into the system by two sequences: pre-treating goethite at 40 (degrees)C for 1 week, and applying with Cd simultaneously. Similarly, for phosphate sorption, Cd was applied by pre-treating goethite at 40 (degrees)C for 1 week or simultaneous addition with phosphate. Results demonstrated that phosphate added to goethite enhanced Cd adsorption, and facilitated Cd release as compared to untreated goethite. Cadmium had slightly higher adsorption, but a significantly faster desorption rate from the goethite simultaneously treated with phosphate and Cd, as compared to phosphate-pretreated goethite. Cadmium and its application time had little impact on phosphate sorption by goethite. However, phosphate desorption kinetics was affected by Cd application time. When the sorption time was short (15 min), phosphate desorption was faster from the goethite that was simultaneously treated with phosphate and Cd, as compared to Cd pretreated or untreated goethite. In contrast, a longer sorption time (4 weeks) resulted in a higher desorption rate of phosphate from Cd pretreated goethite than simultaneously phosphate-Cd treated goethite. This study provided useful information on adsorption/desorption kinetics in complicated Cd-phosphate-goethite systems.     

Effect of charcoal amendment on adsorption, leaching and degradation of isoproturon in soils

The effects of charcoal amendment on adsorption, leaching and degradation of the herbicide isoproturon in soils were studied under laboratory conditions. The adsorption data all fitted well with the Freundlich empirical equation. It was found that the adsorption of isoproturon in soils increased with the rate of charcoal amended (correlation coefficient r=0.957**, P<0.01). The amount of isoproturon in leachate decreased with the increase of the amount of charcoal addition to soil column, while the retention of isoproturon in soils increased with an increase in the charcoal content of soil samples. Biodegradation was still the most significant mechanism for isoproturon dissipation from soil. Charcoal amendment greatly reduced the biodegradation of isoproturon in soils. The half-lives of isoproturon degradation (DT(50)) in soils greatly extended when the rate of added charcoal increased from 0 to 50 g kg(-1) (for Paddy soil, DT(50) values increased from 54.6 to 71.4 days; for Alfisol, DT(50) from 16.0 to 136 days; and for Vertisol, DT(50) from 15.2 to 107 days). The degradation rate of isoproturon in soils was significantly negatively correlated with the amount of added charcoal. This research suggests that charcoal amendment may be an effective management practice for reducing pesticide leaching and enhancing its persistence in soils.     

The fate of endosulfan in aquatic ecosystems

Endosulfan, one of the major pesticides used in cotton-growing, is of environmental concern because of its toxicity to fish and its apparent persistence in the environment. This study examines the distribution and degradation pathways for endosulfan in an aquatic system and the processes by which it is removed. In the alkaline waters of the cotton region, hydrolysis is the dominant degradation process. By this mechanism alone, the expected half-lives for the alpha- and beta-endosulfan isomers were found to be 3.6 days and 1.7 days, respectively. Partitioning studies showed, however, that the major proportion of endosulfan would associate with the sediments (log Koc(alpha) 3.6 and log Koc(beta) 4.3). Field studies confirmed the presence of high concentrations in sediments. Microcosm experiments showed that loss of endosulfan was slower than predicted from hydrolysis rates. Models are presented to explain how desorption from sediment limits the loss of endosulfan from a system.     

The relationship between surface adsorption and the hydrolysis of amitraz in anionic surfactant solutions

The adsorption of amitraz to various adsorbents was studied in terms of the amount and rate of adsorption and the effect that adsorption had on the stability of amitraz in an aqueous environment. Adsorption results showed that in terms of their ability to adsorb amitraz from solution the adsorbents tested in this study can be ordered as follows: coarse carbon > cation exchange resin > or = anion exchange resin > fine carbon. Amitraz was not adsorbed on sand and potassium oxihumate. Adding sodium lauryl sulfate and potassium oxihumate to aqueous suspensions of suspended adsorbents containing adsorbed amitraz showed that both these anionic surfactants significantly increased the hydrolysis rate because the half-lives for amitraz was reduced from 27 days for a suspension to only 8 hours for amitraz adsorbed to a cation exchange resin and suspended in an aqueous buffer pH 5.8 containing 0.5% of the anionic surfactant sodium lauryl sulfate and 12 hours when 1% potassium oxihumate was added.     

Bioavailability and mass balance studies of a commercial pentabromodiphenyl ether mixture in male Sprague-Dawley rats

Cyanogenic glycosides are common plant toxins. Toxic hydrogen cyanide originating from cyanogenic glycosides may affect soil processes and water quality. In this study, hydrolysis, degradation and sorption of dhurrin (4-hydroxymandelonitrile-beta-d-glucoside) produced by sorghum has been studied in order to assess its fate in soil. The log K(ow) of dhurrin was -1.18+/-0.08 (22 degrees C). Hydrolysis was a first-order reaction with respect to dhurrin and hydroxyl ion concentrations. Half lives ranged from 1.2h (pH 8.6; 25 degrees C) to 530d (pH 4; 25 degrees C). The activation energy of hydrolysis was 112+9kJ. At pH 5.8 and room temperature, addition of humic acids (50gl(-1)) increased the rate of hydrolysis tenfold, while addition of kaolinite or goethite (100-250gl(-1)) both decreased the rate considerably. No significant sorption to soil components could be observed. The degradation rates of dhurrin in top and subsoils of Oxisols, Ultisols, Alfisols and Mollisols were studied at 22 degrees C (25mgl(-1), soil:liquid 1:1 (w:V), pH 3.8-8.1). Half-lives were 0.25-2h for topsoils, and 5-288h in subsoils. Hydrolysis in solution explained up to 45% of the degradation in subsoils whereas the contribution in topsoils was less than 14%, indicating the importance of enzymatic degradation processes. The highest risk of dhurrin leaching will take place when the soil is a low activity acid shallow soil with low content of clay minerals, iron oxides and humic acids.     

Kinetics of the biodegradation pathway of endosulfan in the aerobic and anaerobic environments

The enriched mixed culture aerobic and anaerobic bacteria from agricultural soils were used to study the degradation of endosulfan (ES) in aqueous and soil slurry environments. The extent of biodegradation was ∼95% in aqueous and ∼65% in soil slurry during 15 d in aerobic studies and, ∼80% in aqueous and ∼60% in soil slurry during 60 d in anaerobic studies. The pathways of aerobic and anaerobic degradation of ES were modeled using combination of Monod no growth model and first order kinetics. The rate of biodegradation of β-isomer was faster compared to α-isomer. Conversion of ES to endosulfan sulfate (ESS) and endosulfan diol (ESD) were the rate limiting steps in aerobic medium and, the hydrolysis of ES to ESD was the rate limiting step in anaerobic medium. The mass balance indicated further degradation of endosulfan ether (ESE) and endosulfan lactone (ESL), but no end-products were identified. In the soil slurries, the rates of degradation of sorbed contaminants were slower. As a result, net rate of degradation reduced, increasing the persistence of the compounds. The soil phase degradation rate of β-isomer was slowed down more compared with α-isomer, which was attributed to its higher partition coefficient on the soil.     

Speciation and persistence of doxycycline in the aquatic environment: Characterization in terms of steady state kinetics

The aim of the present work was to establish the kinetics for the degradation of doxycycline in the aquatic environment with a view to arriving at a kinetic model that can be used to predict the persistence of antibiotic with confidence. The degradation of doxycycline in both water and sediment phases of aquatic microcosm experiments, as well as in distilled water control experiments, was studied over a period of 90 days. An initial 21% loss due to adsorption by the sediment was observed in the microcosm experiment soon after charging. Biphasic zero-order linear rates of degradation, attributed to microbial degradation of the free and sediment or colloidal particle-adsorbed antibiotic, were observed for both water phase (2.3 × 10^?2 and 4.5 × 10^?3 μgg^?1 day^?1) and sediment phase (7.9 × 10^?3 and 1.5 × 10^?3 μgg^?1 day^?1) of the microcosm experiment. The covered distilled water control experiment exhibited a monophasic zero-order linear rate (1.9 × 10^?3 μgg^?1 day^?1) attributed to hydrolysis, while the distilled water experiment exposed to natural light exhibited biphasic liner rates attributed to a combination of hydrolysis and photolysis (2.9 × 10^?3 μgg^?1 day^?1) and to microbial degradation (9.8 × 10^?3 μgg^?1 day^?1). A kinetic model that takes into account hydrolysis, photolysis, microbial degradation as well as sorption/desorption by colloidal and sediment particles is presented to account for the observed zero-order kinetics. The implications of the observed kinetics on the persistence of doxycycline in the aquatic environment are discussed.     

Effect of ethylenediamine-N,N′-disuccinic acid on Fenton and photo-Fenton processes using goethite as an iron source: optimization of parameters for bisphenol A degradation

The main disadvantage of using iron mineral in Fenton-like reactions is that the decomposition rate of organic contaminants is slower than in classic Fenton reaction using ferrous ions at acidic pH. In order to overcome these drawbacks of the Fenton process, chelating agents have been used in the investigation of Fenton heterogeneous reaction with some Fe-bearing minerals. In this work, the effect of new iron complexing agent, ethylenediamine-N,N'-disuccinic acid (EDDS), on heterogeneous Fenton and photo-Fenton system using goethite as an iron source was tested at circumneutral pH. Batch experiments including adsorption of EDDS and bisphenol A (BPA) on goethite, H₂O₂ decomposition, dissolved iron measurement, and BPA degradation were conducted. The effects of pH, H₂O₂ concentration, EDDS concentration, and goethite dose were studied, and the production of hydroxyl radical (^?OH) was detected. The addition of EDDS inhibited the heterogeneous Fenton degradation of BPA but also the formation of ^?OH. The presence of EDDS decreases the reactivity of goethite toward H₂O₂ because EDDS adsorbs strongly onto the goethite surface and alters catalytic sites. However, the addition of EDDS can improve the heterogeneous photo-Fenton degradation of BPA through the propagation into homogeneous reaction and formation of photochemically efficient Fe-EDDS complex. The overall effect of EDDS is dependent on the H₂O₂ and EDDS concentrations and pH value. The high performance observed at pH 6.2 could be explained by the ability of O ₂ ^?? to generate Fe(II) species from Fe(III) reduction. Low concentrations of H₂O₂ (0.1 mM) and EDDS (0.1 mM) were required as optimal conditions for complete BPA removal. These findings regarding the capability of EDDS/goethite system to promote heterogeneous photo-Fenton oxidation have important practical implications for water treatment technologies.     

The fate of dichlorvos in soil

Experiments were conducted to determine the factors responsible for the loss (adsorption, chemical hydrolysis, microbial degradation, etc.) of dichlorvos (2,2-dichlorovingl $\text{0}$,$\text{0}$-dimethyl phosphate) in soil perfusion systems of Houston Black clay. The rate of disappearance from the perfusate (hence the rate of dichlorvos degradation in soil) was related directly to the presence of $\text{Bacillus}$$\text{cereus}$ in the perfusion system, the pH of the system, and the extent of dichlorvos adsorption. Gas liquid chromatographic analyses of the perfusates showed that dichlorvos disappearance was rapid when $\text{B}$. $\text{cereus}$ was added to a previously sterilized soil perfusion system (50% in 3.9 days). Under sterile conditions, 50% of the added dichlorvos was recovered after 10 days. When $\text{B}$. $\text{cereus}$ was added to a mineral salts medium containing dichlorvos as sole ccrbon source, 49% of the initial dichlorvos concentration was degraded in 4 days. The organism was not capable of utilizing dichlorvos as a sole phosphorus source. Chemical hydrolysis of dichlorvos in aqueous, buffered, soil-free systems showed that hydrolysis did not occur in very acid systems (<pH 3.3), but increased with increasing pH values (26% in 4 days at pH 6.9), and was rapid at pH 9.3 (> 99% in 2 days). The extent of dichlorvos adsorption was determined by comparing the initial loss of dichlorvos in a sterile, soil-free extract solution with the initial loss in a sterile soil perfusion system. The rapid initial disappearance of dichlorvos in the presence of sterilized soil was attributed to soil adsorption of the pesticide. After 10 days both systems contained equal concentrations (50%) of dichlorvos. Non-biological mechanisms accounted for 70% of the total degradation of dichlorvos, while bacterial degradation accounted for 30% in the soil perfusion systems.     

Organic compounds adsorption onto activated carbon: the effect of association between dissolved humic substances and pesticides

The quantitative determination of pesticide binding to dissolved humic substances is relevant to both water treatment operation using activated carbon adsorption process and the application of transport models that predict the environmental distribution patterns of a given hydrophobic contaminant. In this study and in a first set of experiments, the extent of binding between (i) three pesticides of environmental concern, aldicarb, lindane and pentachlorophenol, and (ii) dissolved commercial humic acid and soil extracted fulvic acid, was determined using dialysis experiments and water solubility enhancement tests. In a second set of experiments, the influence of dissolved humic substances or pesticide on the retention of the other co-adsorbate onto activated carbon was investigated in binary systems. It was found that association was negligible for aldicarb and that the pesticide sorption onto activated carbon was not affected by humic acid (8.5 mg liter(-1) DOC). The association constants K for lindane and pentachlorophenol were identical in the presence of fulvic acid (logK=4.1) but lower than that observed with humic acid. In the presence of humic acid, binding affinity for pentachlorophenol (logK=4.6) was higher than the one observed for lindane (logK=4.4), despite its much higher water solubility. This observation suggests that the aromatic character of the pentachlorophenol molecule contributes to association interactions with humic acid. From co-adsorption experiments onto activated carbon it was found that fulvic acid (7.7 mg litre(-1) DOC) slightly enhances sorption kinetics of pentachlorophenol. Lindane (1 mg litre(-1)) does not affect sorption kinetics for fulvic acid but markedly enhances both the sorption kinetics and adsorptive capacity for humic acid. Activated carbon retention of dissolved humic substances or pesticide appears to be enhanced by the association potential that exists between these co-adsorbates in some binary systems.     

Role of goethite dissolution in the oxidation of 2-chlorophenol with hydrogen peroxide.

It is well known that the dissolution of goethite plays an important role in catalyzing the oxidation of organic chemicals. Therefore, this study investigates how surface dissolution of goethite affects 2-chlorophenol oxidation in the goethite/H2O2 process. Experimental results indicate that ligand and reductant can enhance the dissolution rate of goethite, which is surface-controlled. Our results further indicate 2-chlorophenol degradation depends on goethite concentration. In addition, the oxidation rate of 2-CP is correlated with reductive dissolution rate at various dosages of goethite. Moreover, the oxidation mechanism of 2-CP is also a surface-controlled reaction. A mechanism proposed herein indicates that, in addition to the contaminant, its intermediate species affect the oxidation rate as well.     

Adsorption of phenol by bentonite

The potential of bentonite for phenol adsorption from aqueous solutions was studied. Batch kinetics and isotherm studies were carried out to evaluate the effect of contact time, initial concentration, pH, presence of solvent, and the desorption characteristics of bentonite. The adsorption of phenol increases with increasing initial phenol concentration and decreases with increasing the solution pH value. The adsorption process was significantly influenced by the solvent type in which phenol was dissolved. The affinity of phenol to bentonite in the presence of cyclohexane was greater than that in water and was lowest in the presence of methanol. Methanol was used to extract phenol from bentonite. The degree of extraction was dependent on the amount of phenol adsorbed by bentonite. X-ray diffraction analysis showed that the crystalline structure of bentonite was destroyed when cyclohexane was used. The ability of bentonite to adsorb phenol from cyclohexane decreased as the water to cyclohexane ratio was increased. Furthermore, hysteresis was observed in phenol desorption from bentonite in aqueous solutions. The equilibrium data in aqueous solutions was well represented by the Langmuir and Freundlich isotherm models. The removal of phenol from aqueous solutions was observed without surface modification.     

Evaluation of photolysis and hydrolysis of atrazine and its first degradation products in the presence of humic acids

Relative importance of hydrolysis and photolysis of atrazine and its degradation products in aqueous solutions with dissolved humic acids (HA) has been assessed under exposure to sunlight and under UV irradiation. Quantum yield for direct photolysis of atrazine at 254 nm was 0.037 mol photon(-1), the reaction order was 0.8. Atrazine, desethylatrazine and desisopropylatrazine converted to their 2-hydroxy analogs with rate constants 0.02-0.08 min(-1) in clear solutions, while addition of HA (300 mg L(-1)) caused a 10-fold increase in rate constants. Hydroxyatrazine was not degraded. No evidence of photo-Fenton reaction was found. Under exposure to solar light, atrazine, desethylatrazine and desisopropylatrazine were converted to 2-hydroxy analogs only at pH 2 because of acid hydrolysis and possible contribution of photolysis. At lower HA concentration, only their light-shielding effect was noticed, while at higher concentrations, HA-catalysed hydrolysis prevailed. Hydroxyatrazine concentration diminished at all pH values in solutions without HA exposed to sunlight.     

Oxidative transformation of polybrominated diphenyl ether congeners (PBDEs) and of hydroxylated PBDEs (OH-PBDEs)

BACKGROUND, AIM, AND SCOPE: The historical and widespread use of polybrominated diphenyl ethers (PBDEs) as flame retardants in consumer products worldwide has caused PBDEs to now be regarded as pervasive environmental contaminants. Most recently, hydroxylated PBDEs (OH-PBDEs) and methoxylated PBDEs (MeO-PBDEs) have emerged as environmentally relevant due to reports of their natural production and metabolism. An important parameter for assessing the environmental impact of a chemical substance is persistence. By formulating the concept that persistence is the result of the substance's physicochemical properties and chemical reactivity, Green and Bergman have proposed a new methodology to determine the inherent persistence of a chemical. If persistence could be predicted by straightforward methods, substances with this quality could be screened out before large-scale production/manufacturing begins. To provide data to implement this concept, we have developed new methodologies to study chemical transformations through photolysis; hydrolysis, substitution, and elimination; and via oxidation. This study has focused on adapting an oxidative reaction method to be applicable to non-water soluble organic pollutants. MATERIALS AND METHODS: PBDEs and one MeO-PBDE were dissolved in tetrahydrofuran/methanol and then diluted in alkaline water. The OH-PBDEs were dissolved in alkaline water prior to reaction. The oxidation degradation reaction was performed at 50 degrees C using potassium permanganate as described elsewhere. The pH was maintained at 7.6 with disodium hydrogen phosphate and barium hydrogen phosphate, the latter also serving as a trapping agent for manganate ions. The oxidation reactions were monitored by high-performance liquid chromatography and reaction rates were calculated. RESULTS: The OH-PBDEs have very fast oxidative transformation rates compared to the PBDEs. The reaction rates seem to be primarily dependent on substitution pattern of the pi-electron-donating bromine substituents and of bromine content. There are indications that further reactions of OH-PBDEs, e.g., methylation to the MeO-PBDEs, decrease the oxidation rates, and thereby generate more persistent substances. DISCUSSION: The resistance of PBDEs to oxidation, a major degradation pathway in air, should be further investigated, since these compounds do undergo long range transport. With slight modifications, the original method has been adapted to include a larger variety of chemical substances, and preliminary data are now available on the oxidative transformation rates for PBDEs and of OH-PBDEs. CONCLUSIONS: The original oxidation degradation method can now include non-water soluble compounds. This modification, using low concentrations of test chemicals, allows us to measure oxidative transformation rates, for some of the lower brominated DEs, data that can be used to assess their persistence in future model calculations. Oxidative transformation rates for PBDEs are slow compared to those for the OH-PBDEs. This suggests that OH-PBDEs, when released into the environment, undergo faster oxidative metabolism and excretion than the PBDEs. RECOMMENDATIONS AND PERSPECTIVES: To evaluate the modified method, more degradation reactions with non-water soluble compounds should be investigated. Recent studies show that OH-PBDEs are present in rats and in humans and, because of their activity as endocrine disruptors, determining their subsequent environmental fate is of importance. The resistance of PBDEs to oxidative degradation should be acknowledged as of possible future concern. Several other compound classes (such as polychlorinated biphenyls (PCBs), hydroxylated polychlorinated biphenyls (OH-PCBs), and pharmaceuticals) need to be subjected to this screening method to increase the database of transformation rates that can be used with this model.     

Competitive removal of pharmaceuticals from environmental waters by adsorption and photocatalytic degradation

This work explores the competitive removal of pharmaceuticals from synthetic and environmental waters by combined adsorption-photolysis treatment. Five drugs usually present in waterways have been used as target compounds, some are pseudo-persistent pollutants (carbamazepine, clofibric acid, and sulfamethoxazole) and others are largely consumed (diclofenac and ibuprofen). The effect of the light source on adsorption of drugs onto activated carbons followed by photolysis with TiO₂ was assessed, being UV-C light the most effective for drug removal in both deionized water and river water. Different composites prepared from titania nanoparticles and powdered activated carbons were tested in several combined adsorption-photocatalysis assays. The composites prepared by calcination at 400 °C exhibited much better performance than those synthesized at 500 °C, being the C400 composite the most effective one. Furthermore, some synthetic waters containing dissolved species and environmental waters were used to investigate the effect of the aqueous matrix on each drug removal. In general, photocatalyst deactivation was found in synthetic and environmental waters. This was particularly evident in the experiments performed with bicarbonate ions as well as with wastewater effluent. In contrast, tests conducted in seawater showed adsorption and photocatalytic degradation yields comparable to those obtained in deionized water. Considering the peculiarities of substrate competition in each aqueous matrix, the combined adsorption-photolysis treatment generally increased the overall elimination of drugs in water.     

Cadmium adsorption and desorption behaviour on goethite at low equilibrium concentrations: effects of pH and index cations

The transport and bioavailability of cadmium is governed mainly by its adsorption-desorption reactions with minerals such as goethite--a common iron oxide mineral in variable charged and highly weathered tropical soils. Soil factors such as pH, temperature, solution Cd concentration, ionic strength and ageing affect Cd adsorption on goethite. The desorption behaviour of Cd from goethite at low concentrations is not fully understood. This study investigates the adsorption-desorption of Cd at low Cd concentrations (Cd adsorbed on goethite from 20 to 300 microM Cd solutions) in Na and Ca nitrate solutions of 0.03 M nominal ionic strengths. Synthetic goethite prepared by ageing a ferric hydroxide gel at high pH and room temperature was used for Cd adsorption and desorption studies. For desorption experiment 10 successive desorptions were made for the whole range of initial Cd concentrations (20-300 microM) in the presence of 0.01 M Ca(NO3)2 or 0.03 M NaNO3 solutions. Cadmium adsorption was found to be higher in Na+ than Ca2+ probably due to the competition of Ca2+ ions with Cd2+ ions for adsorption sites on the surfaces of goethite. The effect of index cation on Cd adsorption diminished with increase in pH from 5.0 to 6.0. Cadmium desorption decreased with increase in pH from 5.0 to 6.0 in both Na and Ca systems. After 10 successive desorptions with 0.03 M NaNO3 at the lowest initially adsorbed Cd approximately 45%, 20% and 7% of the adsorbed Cd was desorbed at pH 5.0, 5.5 and 6.0, respectively. The corresponding desorptions in the presence of 0.01 M Ca(NO3)2 were 49%, 22% and 8%, respectively. The Freundlich parameter, k, based on each progressive step of desorption at different adsorbed concentration increased with increasing desorption step, which may indicates that a fraction of Cd was resistant to desorption. Low Cd desorbability from goethite may be due to its specific adsorption and/or possibly as a result of Cd entrapment in the cracks or defects in goethite structure.