Leaching and degradation of corn and soybean pesticides in an Oxisol of the Brazilian Cerrados

Pesticide pollution of ground and surface water is of growing concern in tropical countries. The objective of this pilot study was to evaluate the leaching potential of eight pesticides in a Brazilian Oxisol. In a field experiment near Cuiabá, Mato Grosso, atrazine, chlorpyrifos, lambda-cyhalothrin, endosulfane alpha, metolachlor, monocrotofos, simazine, and trifluraline were applied onto a Typic Haplustox. Dissipation in the topsoil, mobility within the soil profile and leaching of pesticides were studied for a period of 28 days after application. The dissipation half-life of pesticides in the topsoil ranged from 0.9 to 14 d for trifluraline and metolachlor, respectively. Dissipation curves were described by exponential functions for polar pesticides (atrazine, metolachlor, monocrotofos, simazine) and bi-exponential ones for apolar substances (chlorpyrifos, lambda-cyhalothrin, endosulfane alpha, trifluraline). Atrazine, simazine and metolachlor were moderately leached beyond 15 cm soil depth, whereas all other compounds remained within the top 15 cm of the soil. In lysimeter percolates (at 35 cm soil depth), 0.8-2.0% of the applied amounts of atrazine, simazine, and metolachlor were measured within 28 days after application. Of the other compounds less than 0.03% of the applied amounts was detected in the soil water percolates. The relative contamination potentials of pesticides, according to the lysimeter study, were ranked as follows: metolachlor > atrazine = simazine > monocrotofos > endsulfane alpha > chlorpyrifos > trifluraline > lambda-cyhalothrin. This order of the pesticides was also achieved by ranking them according to their effective sorption coefficient Ke, which is the ratio of Koc to field-dissipation half-life.     

The status of pesticide pollution in surface waters (rivers and lakes) of Greece. Part I. Review on occurrence and levels

This review evaluates and summarizes the results of long-term research projects, monitoring programs and published papers concerning the pollution of surface waters (rivers and lakes) of Greece by pesticides. Pesticide classes mostly detected involve herbicides used extensively in corn, cotton and rice production, organophosphorus insecticides as well as the banned organochlorines insecticides due to their persistence in the aquatic environment. The compounds most frequently detected were atrazine, simazine, alachlor, metolachlor and trifluralin of the herbicides, diazinon, parathion methyl of the insecticides and lindane, endosulfan and aldrin of the organochlorine pesticides. Rivers were found to be more polluted than lakes. The detected concentrations of most pesticides follow a seasonal variation, with maximum values occurring during the late spring and summer period followed by a decrease during winter. Nationwide, in many cases the reported concentrations ranged in low ppb levels. However, elevated concentrations were recorded in areas of high pesticide use and intense agricultural practices. Generally, similar trends and levels of pesticides were found in Greek rivers compared to pesticide contamination in other European rivers. Monitoring of the Greek water resources for pesticide residues must continue, especially in agricultural regions, because the nationwide patterns of pesticide use are constantly changing. Moreover, emphasis should be placed on degradation products not sufficiently studied so far.     

Absorption of current use pesticides by snapping turtle (Chelydra serpentina) eggs in treated soil

Reptiles often breed within agricultural and urban environments that receive frequent pesticide use. Consequently, their eggs and thus developing embryos may be exposed to pesticides. Our objectives were to determine (i) if turtle eggs are capable of absorbing pesticides from treated soil, and (ii) if pesticide absorption rates can be predicted by their chemical and physical properties. Snapping turtle (Chelydra serpentina) eggs were incubated in soil that was treated with 10 pesticides (atrazine, simazine, metolachlor, azinphos-methyl, dimethoate, chlorpyrifos, carbaryl, endosulfan (I and II), captan, and chlorothalonil). There were two treatments, consisting of pesticides applied at application rate equivalents of 1.92 or 19.2 kg a.i/ha. Eggs were removed after one and eight days of exposure and analyzed for pesticides using gas chromatography coupled with a mass selective detector (GC-MSD) or high performance liquid chromatography (HPLC). Absorption of pesticides in eggs from soil increased with both magnitude and duration of exposure. Of the 10 pesticides, atrazine and metolachlor generally had the greatest absorption, while azinphos-methyl had the lowest. Chlorothalonil was below detection limits at both exposure rates. Our preliminary model suggests that pesticides having the highest absorption into eggs tended to have both low sorption to organic carbon or lipids, and high water solubility. For pesticides with high water solubility, high vapor pressure may also increase absorption. As our model is preliminary, confirmatory studies are needed to elucidate pesticide absorption in turtle eggs and the potential risk they may pose to embryonic development.     

Gross fluxes and estuarine behaviour of pesticides in the Scheldt estuary (1995-1997)

As part of the Fluxes of Agrochemicals into the Marine Environment (FAME) project, the gross fluxes of selected pesticides (i.e. the herbicides atrazine, simazine, alachlor and metolachlor, the atrazine degradation product desethylatrazine, the insecticide dichlorvos and the antifouling agent Irgarol 1051) transported by the river Scheldt and the Canal Ghent-Terneuzen were determined from March 1995 through February 1997. In general, the observed temporal trends were related to the application period of the pesticides, except for metolachlor for which elevated concentrations were observed in the winter of 1995-1996. Relatively large gross fluxes were found for desethylatrazine compared with its parent compound. A study on the estuarine behaviour of pesticides showed distinct differences between the compound classes. The mixing plots of the organophosphorus insecticides dichlorvos and diazinon revealed clear evidence of estuarine loss processes which agrees with their low DT50 values reported for water/sediment systems, their relatively high Henry's law constants and, for diazinon, its relatively high Koc value. The mixing plots of the acetanilides alachlor and metolachlor were strongly influenced by an additional direct emission into the estuary, which was evident from a maximum in dissolved concentration near a salinity of 10@1000. An apparent conservative behaviour was observed for the triazine compounds atrazine and Irgarol 1051. This was in contrast to simazine, which showed an apparent non-conservative behaviour. However, the time profiles of the riverine concentrations of simazine did not exclude that the observed curvature was solely caused by estuarine losses; therefore, additional modelling is required. In a follow-up study a suitable hydrological model of the Scheldt estuary was constructed; the results will be presented in a forthcoming paper (Steen, R.J.C.A., Evers, E.H.G., Van Hattum, B., Cofino, W.P. and Brinkman, U.A.Th. Net fluxes of pesticides from the Scheldt estuary into the North Sea: a model approach. Environmental Pollution, submitted.     

Accelerated remediation of pesticide-contaminated soil with zerovalent iron

High pesticide concentrations in soil from spills or discharges can result in point-source contamination of ground and surface waters. Cost-effective technologies are needed for on-site treatment that meet clean-up goals and restore soil function. Remediation is particularly challenging when a mixture of pesticides is present. Zerovalent iron (Fe0) has been shown to promote reductive dechlorination and nitro group reduction of a wide range of contaminants in soil and water. We employed Fe0 for on-site treatment of soil containing > 1000 mg metolachlor, > 55 mg alachlor, > 64 mg atrazine, > 35 mg pendimethalin, and > 10 mg chlorpyrifos kg(-1). While concentrations were highly variable within the windrowed soil, treatment with 5% (w/w) Fe0 resulted in > 60% destruction of the five pesticides within 90 d and increased to > 90% when 2% (w/w) Al2(SO4)3 was added to the Fe0. GC/MS analysis confirmed dechlorination of metolachlor and alachlor during treatment. Our observations support the use of Fe0 for ex situ treatment of pesticide-contaminated soil.     

Pesticide contamination of ground and surface water in Bulgarian Danube plain

Ground and river water from Bulgarian Danube plain, an intensive agricultural area, was monitored for pesticide contamination. Seventeen pesticides belonging to 5 chemical groups were selected for analysis according to a farm use survey. The study has been carried out for two years. Analysis were carried out by capillary gas chromatography (GC) using a dual detection system (ECD and NPD), as well as by high performance liquid chromatography (HPLC) with UV detection. Atrazine was the compound found most often in ground water. The other active ingredients detected in ground and river water were mainly herbicides (alachlor, 2,4-D, metolachlor). The organochlorine insecticides, lindane and endosulfan, were detected at extremely low concentrations. The contamination of atrazine was associated mostly with continuous corn production.     

Determination of trace triazine and chloroacetamide herbicides in tile-fed drainage ditch water using solid-phase microextraction coupled with GC-MS

Solid-phase microextraction coupled with gas chromatography-mass spectrometry (SPME-GC-MS) was used to analyze two triazine (atrazine and simazine) and three chloroacetamide herbicides (acetochlor, alachlor, and metolachlor) in water samples from a midwest US agricultural drainage ditch for two growing seasons. The effects of salt concentration, sample volume, extraction time, and injection time on extraction efficiency using a 100-mum polydimethylsiloxane-coated fiber were investigated. By optimizing these parameters, ditch water detection limits of 0.5 microgL(-1) simazine and 0.25 microgL(-1) atrazine, acetochlor, alachlor, and metolachlor were achieved. The optimum salt concentration was found to be 83% NaCl, while sample volume (10 or 20 mL) negligibly affected analyte peak areas. The optimum extraction time was 40 min, and the optimum injection time was 15 min. Results indicated that atrazine levels in the ditch water exceeded the US maximum contaminant level for drinking water 12% of the time, and atrazine was the most frequently detected among studied analytes.     

Leaching of seven pesticides currently used in cotton crop in Mato Grosso State-Brazil

This study aimed to evaluate the leaching of pesticides and the applicability of the Attenuation Factor (AF) Model to predict their leaching. The leaching of carbofuran, carbendazim, diuron, metolachlor, alpha and beta endosulfan and chlorpyrifos was studied in an Oxisol using a field experiment lysimeter located in Dom Aquino-Mato Grosso. The samples of percolated water were collected by rain event and analyzed. Chemical and physical soil attributes were determined before pesticide application to the plots. The results showed that carbofuran was the pesticide that presented a higher leaching rate in the studied soil, so was the one representing the highest contamination potential. From the total carbofuran applied in the soil surface, around 6% leached below 50 cm. The other pesticides showed lower mobility in the studied soil. The calculated values to AF were 7.06E-12 (carbendazim), 5.08E-03 (carbofuran), 3.12E-17 (diuron), 6.66E-345 (alpha-endosulfan), 1.47E-162 (beta-endosulfan), 1.50E-06 (metolachlor), 3.51E-155 (chlorpyrifos). AF Model was useful to classify the pesticides' potential for contamination; however, that model underestimated pesticide leaching.     

Leaching of seven pesticides currently used in cotton crop in Mato Grosso State—Brazil

This study aimed to evaluate the leaching of pesticides and the applicability of the Attenuation Factor (AF) Model to predict their leaching. The leaching of carbofuran, carbendazim, diuron, metolachlor, α and β endosulfan and chlorpyrifos was studied in an Oxisol using a field experiment lysimeter located in Dom Aquino – Mato Grosso. The samples of percolated water were collected by rain event and analyzed. Chemical and physical soil attributes were determined before pesticide application to the plots. The results showed that carbofuran was the pesticide that presented a higher leaching rate in the studied soil, so was the one representing the highest contamination potential. From the total carbofuran applied in the soil surface, around 6 % leached below 50 cm. The other pesticides showed lower mobility in the studied soil. The calculated values to AF were 7.06E-12 (carbendazim), 5.08E-03 (carbofuran), 3.12E-17 (diuron), 6.66E-345 (α-endosulfan), 1.47E-162 (β-endosulfan), 1.50E-06 (metolachlor), 3.51E-155 (chlorpyrifos). AF Model was useful to classify the pesticides' potential for contamination; however, that model underestimated pesticide leaching.     

Herbicide movement and dissipation at four Midwestern sites

This study was conducted to evaluate atrazine (2-chloro-4-ethylamino-6-isopropyl-1,3,5-triazine) and alachlor (2-chloro-N-(methoxymethyl)acetamide) dissipation and movement to shallow aquifers across the Northern Sand Plains region of the United States. Sites were located at Minnesota on a Zimmerman fine sand, North Dakota on Hecla sandy loam, South Dakota on a Brandt silty clay loam, and Wisconsin on a Sparta sand. Herbicide concentrations were determined in soil samples taken to 90 cm four times during the growing season and water samples taken from the top one m of aquifer at least once every three months. Herbicides were detected to a depth of 30 cm in Sparta sand and 90 cm in all other soils. Some aquifer samples from each site contained atrazine with the highest concentration in the aquifer beneath the Sparta sand (1.28 microg L(-1)). Alachlor was detected only once in the aquifer at the SD site. The time to 50% atrazine dissipation (DT50) in the top 15 cm of soil averaged about 21 d in Sparta and Zimmerman sands and more than 45 d for Brandt and Hecla soils. Atrazine DT50 was correlated positively with % clay and organic carbon (OC), and negatively with % fine sand. Alachlor DT50 ranged from 12 to 32 d for Zimmerman and Brandt soils, respectively, and was correlated negatively with % clay and OC and positively with % sand.     

Validation and application of an analytical method for determining pesticides in the gas phase of ambient air

A method for determining atmospheric concentrations of eight pesticides applied to corn and soybean crops in Mato Grosso state, Brazil is presented. The method involved a XAD-2 resin cartridge coupled to a low volume air pump at 2 L min?1 over 8 hours. Pesticides were recovered from the resin using sonication with n-hexane:ethyl acetate and determined by GC-MS. Good accuracy (76-128%) and precision (CV < 20%) were obtained for atrazine, chlorpyrifos, alpha- and beta-endosulfan, endosulfan sulfate, flutriafol, malathion, metolachlor and permethrin. Method detection ranged from 9.0 to 17.9 ng m?3. This method was applied to 61 gas phase samples collected between December 2008 and June 2009. Atrazine and endosulfan were detected both in urban and rural areas indicating the importance of atmospheric dispersion of pesticides in tropical areas. The simple and efficient extraction method and sampling system employed was considered suitable for identifying pesticides in areas of intense agricultural production.     

Contamination levels of selected organochlorine and organophosphate pesticides in the Selangor River, Malaysia between 2002 and 2003

In Malaysia, rivers are the main source of public water supplies. This study was conducted from 2002 to 2003 to determine the levels of selected organochlorine and organophosphate pesticides in the Selangor River in Malaysia. Surface water samples have been collected seasonally from nine sites along the river. A liquid-liquid extraction followed by gas chromatography-mass spectrometry technique was used to determine the trace levels of these pesticide residues. The organochlorine pesticides detected were lindane, heptachlor, endosulfan, dieldrin, endosulfan sulfate, o,p'-DDT, p,p'-DDT, o,p'-DDE and p,p'-DDE whereas for organophosphate pesticides, they were chlorpyrifos and diazinon. At the river upstream where a dam is located for public water supply, incidents of pesticide levels exceeding the European Economic Community Directive of water quality standards have occurred. Furthermore, the wetland ecosystems located at the downstream of the river which houses the fireflies community is being threatened by occasional pesticide levels above EPA limits for freshwater aquatic organisms. The occurrence of these residual pesticides in the Selangor River can be attributed to the intense agriculture and urban activity.     

Persistence of seven pesticides as influenced by soil moisture1

Abstract

Pesticides are often applied in combination, but less‐often is soil persistence measured this way. The present field and laboratory study determined relative persistence of five herbicides and two insecticides, co‐applied, as a function of three soil water contents. Losses were modeled adequately by first‐order dissipation, with no significant improvement by using a two‐compartment model. The order of persistence in a silt loam, at 25% moisture, was carbofuran < cyanazine < metribuzin = alachlor < atrazine < ethoprop < metolachlor (t_½ ranged from 7–91 days). Carbofuran degradation increased greatly from 12–25% soil moisture; atrazine was unaffected by 12–35%, whereas the remaining compounds showed limited increasing loss in wetter soil. Field‐based persistence was more variable, but generally similar to lab rankings.     

Analytical methods for the determination of alachlor, metolachlor, simazine and atrazine mobility in soils

A method for the determination of the mobility of the herbicides, alachlor, metolachlor, simazine and atrazine in soil is described. The method is based on the use of soil thin-layer chromatography (TLC) and does not require the use of radiolabelled compounds. Soil on the TLC plate after development was separated into various bands, the material in each band was extracted with solvents and analyzed by gas chromatography.     

UV-ozonation of eleven major pesticides as a waste disposal pretreatment

The time required to destroy 3 concentrations (10, 100, and 1000 ppm) of 9 formulated herbicides (alachlor, atrazine, bentazon, butylate, cyanazine, 2, 4-D, metolachlor, metribuzin, and trifluralin) and two formulated insecticides (carbofuran and malathion) by ultraviolet (UV)-ozonation (O₃) was measured in a 66 UV lamp unit. The time required for 90% destruction was dependent on the concentration and increased as the concentration of pesticide increased. UV irradiation in the presence of ozone rapidly photooxidized all pesticides at 10 and 100 ppm and averaged 22 and 61 min, respectively. Longer times were required for pesticides at 1000 ppm.     

Validation and application of an analytical method for determining pesticides in the gas phase of ambient air

A method for determining atmospheric concentrations of eight pesticides applied to corn and soybean crops in Mato Grosso state, Brazil is presented. The method involved a XAD-2 resin cartridge coupled to a low volume air pump at 2 L min^?1 over 8 hours. Pesticides were recovered from the resin using sonication with n-hexane:ethyl acetate and determined by GC-MS. Good accuracy (76–128%) and precision (CV < 20%) were obtained for atrazine, chlorpyrifos, alpha- and beta-endosulfan, endosulfan sulfate, flutriafol, malathion, metolachlor and permethrin. Method detection ranged from 9.0 to 17.9 ng m^?3. This method was applied to 61 gas phase samples collected between December 2008 and June 2009. Atrazine and endosulfan were detected both in urban and rural areas indicating the importance of atmospheric dispersion of pesticides in tropical areas. The simple and efficient extraction method and sampling system employed was considered suitable for identifying pesticides in areas of intense agricultural production.     

Metolachlor and chlorothalonil dissipation in gypsum-amended soil

This work focused on the interactive effects of the fungicide chlorothalonil (2,3,4,6-tetrachloro-1,3-benzendicarbonitrile) and gypsum on the persistence of the soil-residual herbicide metolachlor (2-chloro-N-(6-ethyl-o-tolyl)-N-[(1RS)-2-methoxy-1-methylethyl]acetamide). Gypsum application was included due to its widespread use on peanut (Arachis hypogaea). Both agricultural grade gypsum and reagent CaSO₄-2H₂O were tested. A laboratory soil incubation was conducted to evaluate interactive effects. Results indicated 1.5X greater metolachlor half-life (DT₅₀) in soil amended with chlorothalonil (37 d) as compared to control soil (25 d). The two gypsum sources alone increased metolachlor DT₅₀ to about 32 d and with the combination of chlorothalonil and gypsum, DT50 was 50 d, 2-fold greater than the control. Chlorothalonil dissipation was rapid (DT₅₀ < 4d). A possible explanation for metolachlor dissipation kinetics is a build-up of the chlorothalonil intermediate (4-hydroxychlorothalonil) which limited soil microbial activity and depleted glutathione S-transferase (GST) from chlorothalonil detoxification. Further information related to gypsum impacts is needed. Results confirm previous reports of chlorothalonil impeding metolachlor dissipation and showed the gypsum application extended persistence even longer. Farming practices, such as reducing metolachlor application rates, may need to be adjusted for peanut cropping systems where chlorothalonil and gypsum are used.     

A field study to compare performance of stainless steel research monitoring wells with existing on-farm drinking water wells in measuring pesticide and nitrate concentrations

Existing drinking water wells are widely used for the collection of ground water samples to evaluate chemical contamination. A well comparison study was conducted to compare pesticide and nitrate-N data from specially designed stainless steel research monitoring wells with data from nearby existing on-farm drinking water wells. Results could help to determine whether adequate information concerning ground water contamination can be obtained from existing drinking water wells for use in making pollutant control decisions. The study was conducted during 1993-1994 in the Little Coharie Watershed, a 158 square mile area located in the coastal plain of eastern North Carolina. Statistical analysis indicated that research monitoring wells provided a greater probability of detecting pesticides in ground water than existing on-farm wells. Atrazine was the most frequently detected pesticide found in all wells, followed in order by fluometuron, carbofuran, metolachlor, alachlor, carbaryl, butylate, chlorothalonil, linuron and simazine. Ninety-seven percent of all wells had observed concentrations of nitrate-N, ranging from 0.1 to 30.1 mg/L. There was not a significant difference between research wells and existing wells for monitoring nitrate-N. Based on results of this study, existing drinking water wells can be used for monitoring nitrate; however, specialized stainless steel monitoring wells should be used for monitoring pesticides in ground water.     

Dissipation of chlorothalonil, chlorpyrifos, and profenofos in a Malaysian agricultural soil: a comparison between the field experiment and simulation by the PERSIST model

A comparison of dissipation of chlorothalonil, chlorpyrifos, and profenofos in a Malaysian agricultural soil between the field experiment and simulation by the PERSIST model was studied. A plot of sweet pea (Pisum sativum) from a farm in the Cameron Highlands was selected for the field experiment. The plot was treated with chlorothalonil, chlorpyrifos, and profenofos. Core soil collection was conducted according to the sampling schedule. Residues of the three pesticides were analyzed in the laboratory. Simulations of the three pesticides' persistency were also conducted using a computer-run software PERSIST. Generally, predicted data obtained using PERSIST were found to be high for the three pesticides except for one field measurement of chlorpyrifos. The predicted data for profenofos, which is the most mobile of the three pesticides tested, was not well matched with the observed data compared to chlorothalonil and chlorpyrifos.     

Remediation of alachlor and atrazine contaminated water with zero-valent iron nanoparticles

Zero-valent iron nanoparticles (nZVI, diameter < 90 nm, specific surface area = 25 m² g^?1) have been used under anoxic conditions for the remediation of pesticides alachlor and atrazine in water. While alachlor (10, 20, 40 mg L^?1) was reduced by 92–96% within 72 h, no degradation of atrazine was observed. The alachlor degradation reaction was found to obey first-order kinetics very closely. The reaction rate (35.5 × 10^?3–43.0 × 10^?3 h^?1) increased with increasing alachlor concentration. The results are in conformity with other researchers who worked on these pesticides but mostly with micro ZVI and iron filings. This is for the first time that alachlor has been degraded under reductive environment using nZVI. The authors contend that nZVI may prove to be a simple method for on-site treatment of high concentration pesticide rinse water (100 mg L^?1) and for use in flooring materials in pesticide filling and storage stations.