Effect of sediment properties on the sorption of C12-2-LAS in marine and estuarine sediments

Linear alkylbenzene sulfonates (LAS) are anionic high production volume surfactants used in the manufacture of cleaning products. Here, we have studied the effect of the characteristics of marine and estuarine sediments on the sorption of LAS. Sorption experiments were performed with single sediment materials (pure clays and sea sand), with sediments treated to reduce their organic carbon content, and with field marine and estuarine sediments. C₁₂-2-LAS was used as a model compound. Sorption to the clays montmorillonite and kaolinite resulted in non-linear isotherms very similar for both clays. When reducing the organic content, sorption coefficients decreased proportionally to the fraction removed in fine grain sediments but this was not the case for the sandy sediment. The correlation of the sediment characteristics with the sorption coefficients at different surfactant concentrations showed that at concentrations below 10 μg C₁₂-2-LAS/L, the clay content correlated better with sorption, while the organic fraction became more significant at higher concentrations.     

Effects of lipids on the sorption of hydrophobic organic compounds on geosorbents: a case study using phenanthrene

The impact of the lipid fraction of natural geosorbents on the sorption of a polycyclic aromatic hydrocarbon was assessed using several experiments. In the first set of experiments phenanthrene was sorbed on a coastal sediment as well as on its humin and humic acid fractions before and after lipid extraction. Before lipid extraction, sorption shows dominantly partitioning characteristics. However, the extraction of lipids from sediment and humin drastically increases, by up to one order of magnitude, their sorption affinity for phenanthrene at low sorbate concentrations, resulting in increased isotherm nonlinearity. This effect is less pronounced for humic acids. One mechanism proposed for the increasing sorption is that lipids, despite their very low relative abundance in the sediments, can compete with phenanthrene for specific high affinity sorption sites (e.g., matrix pores and adsorption sites). This competition is not surprising considering the similar hydrophobic nature of lipids and phenanthrene. Lipids, or any non-polar molecules, could also act like plasticizers by swelling rigid domains and disrupting high affinity sites. In both cases, the removal of lipids (and extraction solvents) makes those sites available for phenanthrene. These provide alternative explanations to the previously proposed “solvent conditioning effect” believed to occur when geosorbents are treated with non-polar solvents modifying the matrix structure, an effect yet to be proven at molecular scale. To further investigate the impact of lipids on sorption, other independent experiments were performed. In a second experiment, re-addition of lipids to the extracted sediment restored the sorption isotherm linearity observed in the native material supporting the absence of irreversible extraction artifacts. However, high addition of lipids (i.e., after saturation of high affinity sites) seems to also enlarge the low affinity partitioning domain. These results are consistent with dual-mode, hole-filling, sorption models involving diffusion. In the final set of experiments, solid-state ¹⁹F-NMR using F-labeled lipids sorbed onto the sediments confirmed that lipids may be in different domains (mobile or rigid) that interact or not with phenanthrene. The possible effects of lipid removal on sorption have been overlooked and should be considered when geosorbents are pretreated.     

Linear and non-linear relationships between soil sorption and hydrophobicity: model, validation and influencing factors

The hydrophobic parameter represented by the octanol/water partition coefficient (log P) is commonly used to predict the soil sorption coefficient (K_oc). However, a simple non-linear relationship between log K_oc and log P has not been reported in the literature. In the present paper, soil sorption data for 701 compounds was investigated. The results show that log K_oc is linearly related to log P for compounds with log P in the range of 0.5-7.5 and non-linearly related to log P for the compounds in a wide range of log P. A non-linear model has been developed between log K_oc and log P for a wide range of compounds in the training set. This model was validated in terms of average error (AE), average absolute error (AAE) and root-mean squared error (RMSE) by using an external test set with 107 compounds. Nearly the same predictive capacity was observed in comparison with existing models. However, this non-linear model is simple, and uses only one parameter. The best model developed in this paper is a non-linear model with six correction factors for six specific classes of compounds. This model can well predict log K_oc for 701 diverse compounds with AAE = 0.37. The reasons for systemic deviations in these groups may be attributed to the difference of sorption mechanism for hydrophilic/polar compounds, low solubility for highly hydrophobic compounds, hydrolysis of esters in solution, volatilization for volatile compounds and highly experimental errors for compounds with extremely high or low sorption coefficients.     

Metal concentrations and mobility in marine sediment and groundwater in coastal reclamation areas: a case study in Shenzhen, China

The concentrations of metals in the buried marine sediment and groundwater were differently affected by land reclamation. Nine metals (V, Cr, Mn, Co, Ni, Cu, Zn, Cd and Pb) in sediment and coastal groundwater from reclamation areas in Shenzhen were examined. The gradually decreased concentrations (V, Cr, Mn, Ni, Cu, Zn) in sediment and relatively higher concentrations (V, Cr, Mn, Co, Ni, Cu and Cd) in groundwater within reclamation areas were observed. The increase of V, Cr, Mn, Ni, Cu and Cd concentrations in groundwater within reclamation areas subsequently after land reclamation should be resulted from the mobilization of these metals accumulated in the sediment. These metals appear to be easily mobilized from solid phase to solution phase after reclamation. The physico-chemical changes such as reduction in pH and salinity in water environment induced by land reclamation appear to be responsible for metal mobility in the sediment-groundwater system.     

Analytical model for site-specific isotope fractionation in 13C during sorption: determination by isotopic 13C NMR spectrometry with vanillin as model compound

The aim of this study was to conceive a reactive transport model capable of providing quantitative site-specific enrichment factors for fractionation in ¹³C isotopic content during sorption. As test compound the model treats vanillin, for which the ¹³C isotopic content at natural abundance at each of the 8 carbon positions can be measured by quantitative ¹³C nuclear magnetic resonance spectrometry. This technique determines the isotope ratios with a resolution better than ±1‰ (0.1%) at each carbon position. Site-specific isotope fractionations were recorded in chromatography column experiments with silica RP-18 as stationary phase. The one dimensional reactive transport model accounted for the sorption/desorption behavior of 8 individual ¹³C-isotopomers and one ¹²C-isotopomer of vanillin and reproduced satisfactorily the bulk (average over the whole compound) fractionation observed during elution. After model calibration, the enrichment factors were fitted for each carbon site where a significant fractionation was recorded. To show the interest of such a transport model for environmental studies, the model, extended to three dimensions, was exploited to simulate reactive transport in an aquifer. These results show that significant ¹³C isotope fractionation is expected for 4 out of 8 ¹³C-isotopomers in vanillin, and illustrate that bulk isotope ratios measured by conventional compound specific isotope analysis and mass spectrometry would hardly document significant isotope fractionations in vanillin. It is concluded that modeling of site-specific isotope ratios in molecules is a priori feasible and may help to quantify unknown processes in the environment.