Molecular and physiological approaches to understand the ecology of methanol degradation during the biofiltration of air streams

A 13.4 L biofilter treating an off-gas stream supplemented with methanol under two different situations was studied in terms of MeOH removal efficiency, microbial ecology and odor removal. During Period 1 (P1) the reactor was packed with wood bark chips with no pH control, treating an off-gas resulting from the aerobic chamber of a membrane biological reactor treating sewage and located outdoor, whereas during Period 2 (P2) a compressed air stream fed with MeOH was treated using PVC rings and maintaining pH at neutral values. Both systems operated at 96 g MeOH m⁻³ h⁻¹ achieving removal efficiencies of around 90% during P1 and 99.9% during P2. The relative activity of biomass developed in both systems was assessed using respirometric analysis with samples obtained from both biofilms. Higher biomass activity was obtained during P2 (0.25-0.35 kg MeOH kg⁻¹ VSS d⁻¹) whereas 1.1 kg MeOH kg⁻¹ VSS d⁻¹ was obtained in the case of P1. The application of molecular and microscopic techniques showed that the eukaryotes were predominant during P1, being the yeast Candida boidinii the most abundant microorganism. A specific Fluorescence in situ hybridization probe was designed for C. boidinii and tested successfully. As a result of the neutral pH, a clear predominance of prokaryotes was detected during P2. Interestingly, some anaerobic bacteria were detected such as Desulfovibrio, Desulfobacteraceae species and also some archaea such as Methanosarcina.     

Evaluation of recycling the effluent of hydrogen fermentation for biobutanol production: Kinetic study with butyrate and sucrose concentrations

Butyrate in the effluent of hydrogen-producing bioreactor is a potential feed for biobutanol production. For recycling butyrate, this study investigated the kinetics of biobutanol production by Clostridium beijerinckii NRRL B592 from different paired concentrations of butyrate and sucrose in a series of batch reactors. Results show that the lag time of butanol production increased with higher concentration of either sucrose or butyrate. In regression analyses, the maximum specific butanol production potential of 6.49 g g⁻¹ of dry cell was projected for 31.9 g L⁻¹ sucrose and 1.3 g L⁻¹ butyrate, and the maximum specific butanol production rate of 0.87 g d⁻¹ g⁻¹ of dry cell was predicted for 25.0 g L⁻¹ sucrose and 2.6 g L⁻¹ butyrate. The specific butanol production potential will decrease if more butyrate is added to the reactor. However, both sucrose and butyrate concentrations are weighted equally on the specific butanol production rate. This observation also is true on butanol yield. The maximum butanol yield of 0.49 mol mol⁻¹ was projected for 25.0 g L⁻¹ sucrose and 2.3 g L⁻¹ butyrate. In addition, a confirmation study found butanol yield increased from 0.2 to 0.3 mol mol⁻¹ when butyrate addition increased from 0 to 1 g L⁻¹ under low sugar concentration (3.8 g L⁻¹ sucrose). The existence of butyrate increases the activity of biobutanol production and reduces the fermentable sugar concentration needed for acetone–butanol–ethanol fermentation.     

Deposition fluxes of PCDD/Fs in a reservoir system in northern Taiwan

In this study, polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) concentrations and depositions in ambient air, water column and sediment were measured at a coupled reservoir-watershed system in northern Taiwan. The atmospheric PCDD/F concentration measured in the vicinity of the reservoir ranged from 4.9 to 39 fg I-TEQ m⁻³ and the Asian dust storm in February accounted for the peak value, which corresponded to a total suspended particle concentration of 128 μg m⁻³. The atmospheric PCDD/F deposition ranged from 1.4 to 19 pg I-TEQ m⁻² d⁻¹, with higher deposition occurring during winter and spring (long-range transport events). During summer, when atmospheric deposition is lower, consecutive tropical cyclones (typhoons) bring heavy rainfall that enhances soil erosion and creates turbidity-driven intermediate flow. This results in significantly higher PCDD/F deposition in water column of the reservoir at 70 m water depth (179 pg I-TEQ m⁻² d⁻¹) than at 20 m (21 pg I-TEQ m⁻² d⁻¹) during typhoon event. The accumulation rate of PCDD/Fs (9.1 ng I-TEQ m⁻² y⁻¹) in the reservoir sediments (depth: 0-2 cm) was consistent with PCDD/F deposition obtained from water column (6.1 and 8.3 ng I-TEQ m⁻² y⁻¹); however, it is significantly higher when compared to the atmospheric deposition (2.0 ng I-TEQ m⁻² y⁻¹). Based on the mass balance between the measurements of atmospheric deposition and sinking particles in water column, around 54-74% of PCDD/F inputs into the reservoir were contributed by the catchment erosion during normal period. However, the PCDD/F input contributed by the enhanced catchment erosion significantly increased to 90% during intensive typhoon events.     

Bioaccumulation and depuration of anthracene in Penaeus monodon (Fibricius) through food ingestion

Understanding on the bioaccumulation and depuration of PAHs (polycyclic aromatic hydrocarbons) in Penaeus monodon is important in seafood safety because it is one of the most popular seafood consumed worldwide. In this study, we used anthracene as the precursor compound for PAHs accumulation and depuration in the shrimp. Commercial feed pellets spiked with anthracene were fed to P. monodon. At 20 mg kg⁻¹ anthracene, P. monodon accumulated 0.1% of the anthracene from the feed. P. monodon deputed the PAH two times faster than its accumulation. The shrimp reduced its feed consumption when anthracene content in the feed exceeded 20 mg kg⁻¹. At 100 mg kg⁻¹ anthracene, P. monodon started to have necrosis tissues on the posterior end of their thorax. The bioaccumulation factor (BAF), uptake rate constant (k₁) and depuration rate constant (k₂) of anthracene in P. monodon were 1.15 × 10⁻³, 6.80 × 10⁻⁴ d⁻¹ and 6.28 × 10⁻¹ d⁻¹, respectively. The depuration rate constant is about thousand times higher than the uptake rate constant and this indicated that this crustacean is efficient in depurating hydrocarbons from their tissue.     

Effect of vegetation in pilot-scale horizontal subsurface flow constructed wetlands treating sulphate rich groundwater contaminated with a low and high chlorinated hydrocarbon

In order to characterize the effect of vegetation on performance of constructed wetlands (CWs) treating low and high chlorinated hydrocarbon, two pilot-scale horizontal subsurface flow (HSSF) CWs (planted with Phragmites australis and unplanted) treating sulphate rich groundwater contaminated with MCB (monochlorobenzene, as a low chlorinated hydrocarbon), (about 10 mg L⁻¹), and PCE (perchloroethylene, as a high chlorinated hydrocarbon), (about 2 mg L⁻¹), were examined. With mean MCB inflow load of 299 mg m⁻² d⁻¹, the removal rate was 58 and 208 mg m⁻² d⁻¹ in the unplanted and planted wetland, respectively, after 4 m from the inlet. PCE was almost completely removed in both wetlands with mean inflow load of 49 mg m⁻² d⁻¹. However, toxic metabolites cis-1,2-DCE (dichloroethene) and VC (vinyl chloride) accumulated in the unplanted wetland; up to 70% and 25% of PCE was dechlorinated to cis-1,2-DCE and VC after 4 m from the inlet, respectively. Because of high sulphate concentration (around 850 mg L⁻¹) in the groundwater, the plant derived organic carbon caused sulphide formation (up to 15 mg L⁻¹) in the planted wetland, which impaired the MCB removal but not statistically significant. The results showed significant enhancement of vegetation on the removal of the low chlorinated hydrocarbon MCB, which is probably due to the fact that aerobic MCB degraders are benefited from the oxygen released by plant roots. Vegetation also stimulated completely dechlorination of PCE due to plant derived organic carbon, which is potentially to provide electron donor for dechlorination process. The plant derived organic carbon also stimulated dissimilatory sulphate reduction, which subsequently have negative effect on MCB removal.     

Production and sedimentation of peptide toxins nodularin-R and microcystin-LR in the northern Baltic Sea

This seven-year survey was primarily targeted to quantification of production of nodularin-R (NOD-R), a cyclic pentapeptide hepatotoxin, in Baltic Sea cyanobacteria waterblooms. Additionally, NOD-R and microcystin-LR (MC-LR; a cyclic heptapeptide toxin) sedimentation rates and NOD-R sediment storage were estimated. NOD-R production (70-2450 μg m⁻³; ∼1 kg km⁻² per season) and sedimentation rates (particles; 0.03-5.7 μg m⁻² d⁻¹; ∼0.3 kg km⁻² per season) were highly variable over space and time. Cell numbers of Nodularia spumigena did not correlate with NOD-R quantities. Dissolved NOD-R comprised 57-100% of total NOD-R in the predominantly senescent, low-intensity phytoplankton blooms and seston. Unprecedentedly intensive MC-LR sedimentation (0.56 μg m⁻² d⁻¹) occurred in 2004. Hepatotoxin sedimentation rates highly exceeded those of anthropogenic xenobiotics. NOD-R storage in surficial sediments was 0.4-20 μg kg⁻¹ (∼0.1 kg km⁻²). Loss of NOD-R within the chain consisting of phytoplankton, seston and soft sediments seemed very effective.     

Vertical fluxes of aromatic and aliphatic hydrocarbons in the Northwestern Mediterranean Sea

Aliphatic and aromatic hydrocarbon fluxes were measured in time series sediment trap samples at 200 m and at 1000 m depths in the open Northwestern Mediterranean Sea, from December 2000 to July 2002. Averaged fluxes of n-alkanes, UCM and T-PAH₃₅ were 2.96 ± 2.60 μg m⁻² d⁻¹, 64 ± 60 μg m⁻² d⁻¹ and 0.68 ± 0.59 μg m⁻² d⁻¹, respectively. Molecular compositions of both hydrocarbon classes showed a contamination in petrogenic hydrocarbons well above the background levels of such an open site, whereas pyrolytic hydrocarbons stand in the range of other open Mediterranean locations. Fluxes displayed ample interannual and seasonal variabilities, mainly related to mass flux variation while concentration evolutions trigger secondary changes in pollutant fluxes. High lithogenic flux events exported particles with a larger pollutant load than biogenic particles formed during the spring bloom and during the summer. Sinking hydrocarbons were efficiently transported from 200 m to 1000 m.     

Atmospheric partitioning and the air–water exchange of polycyclic aromatic hydrocarbons in a large shallow Chinese lake (Lake Chaohu)

The residual levels of polycyclic aromatic hydrocarbons (PAHs) in the atmosphere and in dissolved phase from Lake Chaohu were measured by (GC–MS). The composition and seasonal variation were investigated. The diffusive air–water exchange flux was estimated by a two-film model, and the uncertainty in the flux calculations and the sensitivity of the parameters were evaluated. The following results were obtained: (1) the average residual levels of all PAHs (PAH16) in the atmosphere from Lake Chaohu were 60.85 ± 46.17 ng m⁻³ in the gaseous phase and 14.32 ± 23.82 ng m⁻³ in the particulate phase. The dissolved PAH16 level was 173.46 ± 132.89 ng L⁻¹. (2) The seasonal variation of average PAH16 contents ranged from 43.09 ± 33.20 ng m⁻³ (summer) to 137.47 ± 41.69 ng m⁻³ (winter) in gaseous phase, from 6.62 ± 2.72 ng m⁻³ (summer) to 56.13 ± 22.99 ng m⁻³ (winter) in particulate phase, and 142.68 ± 74.68 ng L⁻¹ (winter) to 360.00 ± 176.60 ng L⁻¹ (summer) in water samples. Obvious seasonal trends of PAH16 concentrations were found in the atmosphere and water. The values of PAH16 for both the atmosphere and the water were significantly correlated with temperature. (3) The monthly diffusive air–water exchange flux of total PAH16 ranged from −1.77 × 10⁴ ng m⁻² d⁻¹ to 1.11 × 10⁵ ng m⁻² d⁻¹, with an average value of 3.45 × 10⁴ ng m⁻² d⁻¹. (4) The results of a Monte Carlo simulation showed that the monthly average PAH fluxes ranged from −3.4 × 10³ ng m⁻² d⁻¹ to 1.6 × 10⁴ ng m⁻² d⁻¹ throughout the year, and the uncertainties for individual PAHs were compared. (5) According to the sensitivity analysis, the concentrations of dissolved and gaseous phase PAHs were the two most important factors affecting the results of the flux calculations.     

Historical trends in human dietary intakes of endosulfan and toxaphene in China, Korea and Japan

Recently, the Stockholm Convention prohibited the use of toxaphene and has been reviewing endosulfan. The historical use of these pesticides may contaminate food and tend to accumulate in the food chain. In this study, to evaluate the spatial and temporal trends of food contamination, the endosulfan and toxaphene levels were measured in pooled 24-h food composite samples from Chinese (n = 10), Korean (n = 10) and Japanese (n = 40) adults in the 1990s and 2007-2009. Endosulfan was detected in 32 of 40 samples from Japan, but its levels (sum of α- and β-isomers) were low in both the 1990s and 2009 (range as geometric mean (geometric standard deviation) [GM (GSD)]: 0.96 (1.6)-1.42 (1.4) ng kg⁻¹ d⁻¹). The dietary intakes of endosulfan in Seoul as GM (GSD) were 38.68 (1.3) ng kg bw⁻¹ d⁻¹ in 1994 and 92.17 (4.4) ng kg bw⁻¹ d⁻¹ in 2007, and significantly higher than those in Japan (p < 0.05). The samples from Beijing showed a 50-fold increase in the endosulfan levels from 1993 (GM: 0.58 ng kg⁻¹ d⁻¹) to 2009 (GM: 24.91 ng kg bw⁻¹ d⁻¹) (p < 0.05). Toxaphene was detected in 33 of 40 samples from Japan. The dietary intake of toxaphene in Japan (sum of Parlars #26, #50 and #62) was 0.32-1.21 ng kg bw⁻¹ d⁻¹ (range as geometric mean) and no temporal trend was observed. The dietary intake of toxaphene in Seoul increased significantly from 0.2 ng kg bw⁻¹ d⁻¹ (GM) in 1994 to 3.6 ng kg bw⁻¹ d⁻¹ (GM) in 2007 (p < 0.05). Only one of 10 pooled samples from Beijing contained a detectable level of toxaphene (0.3 ng kg bw⁻¹ d⁻¹). For the entire population, the risk of adverse health effects from dietary intakes of endosulfan and toxaphene is unlikely. However, the concentrations of endosulfan in several samples exceeded 10% of the acceptable daily intake limit value of 6 μg kg bw⁻¹ d⁻¹ set by the World Health Organization (WHO). It appears important to refine dietary intake estimates targeting food types and source identification to ensure safe food for consumers.     

Co-composting of spent coffee ground with olive mill wastewater sludge and poultry manure and effect of Trametes versicolor inoculation on the compost maturity

The co-composting of spent coffee grounds, olive mill wastewater sludge and poultry manure was investigated on a semi-industrial scale. In order to reduce the toxicity of the phenolic fraction and to improve the degree of composting humification, composts were inoculated with the white-rot fungus Trametes versicolor in the early stages of the maturation phase.During composting, a range of physico-chemical parameters (temperature and both organic matter and C/N reduction), total organic carbon, total nitrogen, elemental composition, lignin degradation and spectroscopic characteristics of the humic acids (HAs) were determined; impacts of the composting process on germination index of Hordeum vulgare and Lactuca sativa were assessed. The coffee waste proved to be a highly compostable feedstock, resulting in mature final compost with a germination index of 120% in less than 5 months composting. In addition, inoculation with T. versicolor led to a greater degree of aromatization of HA than in the control pile. Moreover, in the inoculated mixture, lignin degradation was three times greater and HA increased by 30% (P < 0.05), compared to the control pile. In the T. versicolor inoculated mixture, the averages of C and N were significantly enhanced in the HA molecules (P < 0.05), by 26% and 22%, respectively. This improvement in the degree of humification was confirmed by the ratio of optical densities of HA solutions at 465 and 665 nm which was lower for HA from the treated mixture (4.5) than that from the control pile (5.4).     

The impact of production type and region on polychlorinated biphenyl (PCB), polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/F) concentrations in Canadian chicken egg yolks

Chicken eggs from five different production types (conventional, omega-3 enriched, free range, organic and free run) were collected, when available, from three regions (west, central and east) of Canada to determine persistent organic pollutant (POP) concentrations. Total polychlorinated biphenyl (PCB) concentrations (∑37 congeners) in yolks from the eggs ranged from 0.162 ng g⁻¹ lipid to 24.8 ng g⁻¹ lipid (median 1.25 ng g⁻¹ lipid) while the concentration of the sum of the 6 indicator PCBs ranged from 0.100 ng g⁻¹ lipid to 9.33 ng g⁻¹ lipid (median 0.495 ng g⁻¹ lipid). Total polychlorinated dibenzo-p-dioxin/dibenzofuran (PCDD/F) concentrations ranged from 2.37 pg g⁻¹ lipid to 382 pg g⁻¹ lipid (median 9.53 pg g⁻¹ lipid). The 2005 WHO toxic equivalency (TEQ) ranged from 0.089 pg TEQ_{PCDD/F+dioxin-like[DL]-PCB} g⁻¹ lipid to 12.8 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid (median 0.342 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid). PCB and PCDD/F concentrations were significantly different (p < 0.001) in egg yolks from different regions of collection. In contrast to observations in Europe, PCB and PCDD/F concentrations in Canadian egg yolks were not impacted solely by the production type (e.g., conventional, free range, organic, etc.) used to maintain the laying chickens. Additionally, only one Canadian free range yolk from western Canada (12.8 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid) exceeded the European toxic equivalent concentration limits for eggs (5 pg TEQ_{PCDD/F+DL-PCB} g⁻¹ lipid). This differs from observations in Europe where free range/home produced eggs frequently have higher POP concentrations than eggs from other production types. Median PCB dietary intake estimates based on consumption of eggs were less than 10 ng d⁻¹ while median PCDD/F intakes were less than 45 pg d⁻¹.     

Ozonation as an advanced oxidant in treatment of bamboo industry wastewater

The present study employed ozonation process to treat the bamboo industry wastewater (BIWW). The impact of ozone dosage and initial organic concentration on color, COD and TOC removal rates were studied along with characterization of the major organics in raw and treated wastewater. The results suggested the ozone dosage of 3.15 g h⁻¹ (concentration 52.5 mg L⁻¹) was suitable for the treatment. After 25 min ozonation of 1 L raw wastewater, the color, COD and TOC removal efficiencies were 95%, 56% and 40%, respectively, with an influent COD concentration of 835 mg L⁻¹. The ratio of kg O₃ kg⁻¹ COD at 3.15 g h⁻¹ was 2.8 (<3), revealing that ozonation was a cost effective process for tertiary treatment of BIWW. Longer oxidization time was required to achieve similar results for raw wastewater with higher COD concentration. The chromatogram from gel permeation chromatography revealed that ozonation resulted in the breakdown of high molecular weight compounds into lower molecular weight components but could not completely mineralize the organic matter. The majority of these compounds were identified in both raw and ozonated samples via GC-MS analysis. In addition to ester derivatives as the main intermediates of ozonation, 1-chloroctadecane, methyl stearate, benzophenone and α-cyperone were identified as the by-products of ozonation.     

Distribution of Se and its species in Myriophyllum spicatum and Ceratophyllum demersum growing in water containing Se (VI)

The uptake of Se (VI) by two aquatic plants, Myriophyllum spicatum L. and Ceratophyllum demersum L., and its effects on their physiological characteristics have been studied. Plants were cultivated outdoors under semi-controlled conditions and in two concentrations of Na selenate solution (20 μg Se L⁻¹ and 10 mg Se L⁻¹). The higher dose of Se reduced the photochemical efficiency of PSII in both species, while the lower dose had no effect on PSII. Addition of Se had no effect on the amounts of chlorophyll a and b. The concentration of Se in plants grown in 10 mg Se L⁻¹, averaged 212 ± 12 μg Se g⁻¹ DM in M. spicatum (grown from 8-13 d), and 492 ± 85 μg Se g⁻¹ DM in C. demersum (grown for 31 d). Both species could take up a large amount of Se. The amount of soluble Se compounds in enzyme extracts ranged from 16% to 26% in control, and in high Se solution from 48% to 36% in M. spicatum and C. demersum, respectively. Se-species were determined using HPLC-ICP-MS. The main soluble species in both plants was selenate (∼37%), while SeMet and SeMeSeCys were detected at trace levels.     

Sorption of chlorinated solvents and degradation products on natural clayey tills

The sorption of chlorinated solvents and degradation products on seven natural clayey till samples from three contaminated sites was investigated by laboratory batch experiments in order to obtain reliable sorption coefficients (K_d values). The sorption isotherms for all compounds were nearly linear, but fitted by Freundlich isotherms slightly better over the entire concentration range. For chloroethylenes, tetrachloroethylene (PCE) was most strongly sorbed to the clayey till samples (K_d = 0.84-2.45 L kg⁻¹), followed by trichloroethylene (TCE, K_d = 0.62-0.96 L kg⁻¹), cis-dichloroethylene (cis-DCE, K_d = 0.17-0.82 L kg⁻¹) and vinyl chloride (VC, K_d = 0.12-0.36 L kg⁻¹). For chloroethanes, 1,1,1-trichloroethane (1,1,1-TCA) was most strongly sorbed (K_d = 0.2-0.45 L kg⁻¹), followed by 1,1-dichloroethane (1,1-DCA, K_d = 0.16-0.24 L kg⁻¹) and chloroethane (CA, K_d = 0.12-0.18 L kg⁻¹). This is consistent with the order of hydrophobicity of the compounds. The octanol-water coefficient (log K_ow) correlated slightly better with log K_d values than log K_oc values indicating that the K_d values may be independent of the actual organic carbon content (f_oc). The estimated log K_oc or log K_d for chlorinated solvents and degradation products determined by regression of data in this study were significantly higher than values determined by previously published empirical relationships. The site specific K_d values as well as the new empirical relationship compared well with calculations on water and soil core concentration for cis-DCE and VC from the Rugårdsvej site. In conclusion, this study with a wide range of chlorinated ethenes and ethanes - in line with previous studies on PCE and TCE - suggest that sorption in clayey tills could be higher than typically expected.     

Reducing phosphorus flux from organic soils in surface flow treatment wetlands

Treatment wetlands have a finite period of effective nutrient removal after which treatment efficiency declines. This is due to the accumulation of organic matter which decreases the capacity and hydraulic retention time of the wetland. We investigated four potential solutions to improve the soluble reactive P (SRP) removal of a municipal wastewater treatment wetland soil including; dry down, surface additions of alum or calcium carbonate and physical removal of the accreted organic soil under both aerobic and anaerobic water column conditions. The flux of SRP from the soil to the water column under aerobic conditions was higher for the continuously flooded controls (1.1 ± 0.4 mg P m⁻² d⁻¹), dry down (1.5 ± 0.9 mg P m⁻² d⁻¹) and CaCO₃ (0.8 ± 0.7 mg P m⁻² d⁻¹) treatments while the soil removal and alum treatments were significantly lower at 0.02 ± 0.10 and −0.07 ± 0.02 mg P m⁻² d⁻¹, respectively. These results demonstrate that the two most effective management strategies at sequestering SRP were organic soil removal and alum additions. There are difficulties and costs associated with removal and disposal of soils from a treatment wetland. Therefore our findings suggest that alum addition may be the most cost effective and efficient means of increasing the sequestering of P in aging treatment wetlands experiencing reduced P removal rates. However, more research is needed to determine the longer term effects of alum buildup in the organic soil on the wetland biota, in particular, on the macrophytes and invertebrates. Since alum effectiveness is time limited, a longer term solution to P flux may favor the organic soil removal.     

Factors affecting the growth rates of ammonium and nitrite oxidizing bacteria

The maximum specific growth rates of both ammonium oxidizing bacteria (AOB) and nitrite oxidizing bacteria (NOB) were investigated under varying aerobic solids retention time (SRT_a) and in the presence/absence of anoxic (alternating) conditions. Two bench SBRs, reactor R1 and R2, were run in parallel for 150 d. Reactor R1 was operated in aerobic conditions while R2 operated in alternating anoxic/aerobic conditions. The feed (synthetic wastewater), temperature, hydraulic retention time and mixing were identical in both reactors. The SRT_a in both reactors was, sequentially, set at four values: 5, 4, 3 and 2 d.Kinetic tests with the biomasses from both reactors were carried out to estimate the maximum specific growth rates (μ_max) at each tested SRT_a and decay rates, in both aerobic and anoxic conditions. The kinetic parameters of nitrifier were estimated through the calibration of a two step nitrification-denitrification activated sludge model.The results point to a slightly higher μ_max,AOB and μ_max,NOB in alternating conditions, while both μ_max,AOB and μ_max,NOB were shown not to vary in the tested range of SRT_a (from 2 to 5 d) at 20 °C. They were relatively high when compared to literature data: 1.05 d⁻¹ < μ_max,AOB < 1.4 d⁻¹ and 0.91 d⁻¹ < μ_max,NOB < 1.31 d⁻¹. The decay coefficients of both AOB and NOB were much higher in aerobic (from 0.22 d⁻¹ to 0.28 d⁻¹) than in anoxic (0.04 d⁻¹ to 0.16 d⁻¹) conditions both in R1 and R2, which explained the higher nitrification rates observed in the alternating reactor.     

Polychlorinated dibenzo-p-dioxin and dibenzofuran in urban air of an Andean city

Particle-bound polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in ambient air were monitored together with particulate matter less than 10 μm (PM₁₀) at three sampling sites of the Andean city of Manizales, Colombia; during September 2009 and July 2010. PCDD/Fs ambient air emissions ranged from 1 fg WHO-TEQ m⁻³ to 52 fg WHO-TEQ m⁻³ in particulate fraction. The PM₁₀ concentrations ranged from 23 μg m⁻³ to 54 μg m⁻³. Concentrations of PM₁₀ and PCDD/Fs in ambient air observed for Manizales - a medium sized city with a population of 380 000 - were comparable to concentrations in larger cities. The highest concentrations of PCDD/Fs and PM₁₀ found in this study were determined at the central zone of the city, characterized by public transportation density, where diesel as principal fuel is used. In addition, hypothetical gas fractions of PCDD/Fs were calculated from theoretical K_p data. Congener profiles of PCDD/Fs exhibited ratios associated with different combustion sources at the different sampling locations, ranging from steel recycling to gasoline and diesel engines. Taking into account particle and gas hypothetical fraction of PCDD/Fs, Manizales exhibited values of PCDD/Fs equivalent to rural and urban-industrial sites in the southeast and center of the city respectively. Poor correlation of PCDDs with PM₁₀ (r = −0.55 and r = 0.52) suggests ambient air PCDDs were derived from various combustion sources. Stronger correlation was observed of PCDFs with PM₁₀. Poor correlation between precipitation and reduced PM₁₀ concentration in ambient air (r = −0.45) suggested low PM₁₀ removal by rainfall.     

Comparative bioremediation potential of four rhizospheric microbial species against lindane

Four microbial species (Kocuria rhizophila, Microbacterium resistens, Staphylococcus equorum and Staphylococcus cohnii subspecies urealyticus) were isolated from the rhizospheric zone of selected plants growing in a lindane contaminated environment and acclimatized in lindane spiked media (5-100 μg mL⁻¹). The isolated species were inoculated with soil containing 5, 50 and 100 mg kg⁻¹ of lindane and incubated at room temperature. Soil samples were collected periodically to evaluate the microbial dissipation kinetics, dissipation rate, residual lindane concentration and microbial biomass carbon (MBC). There was a marked difference (p < 0.05) in the MBC content and lindane dissipation rate of microbial isolates cultured in three different lindane concentrations. Further, the dissipation rate tended to decrease with increasing lindane concentrations. After 45 d, the residual lindane concentrations in three different spiked soils were reduced to 0%, 41% and 33%, respectively. Among the four species, S. cohnii subspecies urealyticus exhibited maximum dissipation (41.65 mg kg⁻¹) and can be exploited for the in situ remediation of low to medium level lindane contaminated soils.     

Dissolution of beryllium in artificial lung alveolar macrophage phagolysosomal fluid

Dissolution of a lung burden of poorly soluble beryllium particles is hypothesized to be necessary for development of chronic beryllium lung disease (CBD) in humans. As such, particle dissolution rate must be sufficient to activate the lung immune response and dissolution lifetime sufficient to maintain chronic inflammation for months to years to support development of disease. The purpose of this research was to investigate the hypothesis that poorly soluble beryllium compounds release ions via dissolution in lung fluid. Dissolution kinetics of 17 poorly soluble particulate beryllium materials that span extraction through ceramics machining (ores, hydroxide, metal, copper-beryllium [CuBe] fume, oxides) and three CuBe alloy reference materials (chips, solid block) were measured over 31 d using artificial lung alveolar macrophage phagolysosomal fluid (pH 4.5). Differences in beryllium-containing particle physicochemical properties translated into differences in dissolution rates and lifetimes in artificial phagolysosomal fluid. Among all materials, dissolution rate constant values ranged from 10⁻⁵ to 10⁻¹⁰ g cm⁻² d⁻¹ and half-times ranged from tens to thousands of days. The presence of magnesium trisilicate in some beryllium oxide materials may have slowed dissolution rates. Materials associated with elevated prevalence of CBD had faster beryllium dissolution rates [10⁻⁷-10⁻⁸ g cm⁻² d⁻¹] than materials not associated with elevated prevalence (p < 0.05).     

Estimation of daily intake of potentially toxic elements from urban street dust and the role of oral bioaccessibility testing

The pseudo-total and oral bioaccessible concentration of six potentially toxic elements (PTEs) in urban street dust was investigated. Typical pseudo-total concentrations across the sampling sites ranged from 4.4 to 8.6 mg kg⁻¹ for As, 0.2-3.6 mg kg⁻¹ for Cd, 25-217 mg kg⁻¹ for Cu, 14-46 mg kg⁻¹ for Ni, 70-4261 mg kg⁻¹ for Pb, and, 111-652 mg kg⁻¹ for Zn. This data compared favourably with other urban street dust samples collected and analysed in a variety of cities globally; the exception was the high level of Pb determined in a specific sample in this study. The oral bioaccessibility of PTEs in street dust is also assessed using in vitro gastrointestinal extraction (Unified Bioaccessibility Method, UBM). Based on a worst case scenario the oral bioaccessibility data estimated that Cd and Zn had the highest % bioaccessible fractions (median >45%) while the other PTEs i.e. As, Cu, Ni and Pb had lower % bioaccessible fractions (median <35%). The pseudo-total and bioaccessible concentrations of PTEs in the samples has been compared to estimated tolerable daily intake values based on unintentional soil/dust consumption. Cadmium, Cu and Ni are well within the oral tolerable daily intake rates. With respect to As and Pb, only the latter exceeds the TDI_oral if we model ingestion rate based on atmospheric ‘dustiness’ rather than the US EPA (2008) unintentional soil/dust consumption rate of 100 mg d⁻¹. We consider it unlikely that even a child with pica tendencies would ingest as much as 100 mg soil/dust during a daily visit to the city centre, and in particular to the sites with elevated Pb concentrations observed in this study.