Improvement in the feeding method to an inclined conveyor designed for the recycling of foundry sand

 The goal of the inclined conveyor method for particle shape separation is to process a large amount of feed material for recycling technology. The high feed rate has been achieved because the movement of particles is faster than for other previously introduced equipment. The separation performance of the apparatus was tested with foundry sand. A large amount of sand was treated, and various processing capacities were studied experimentally. The feed method was improved from point to line with wide troughs to process the higher feed rate. We succeeded in attaining a feed rate of 1.49 × 10⁻³ kg/s with a 0.3-m trough. The space filling, which was an important factor in deciding the capacity of the feed rate, was defined. This method is useful for any kind of line-feed method. Received: March 25, 2002 / Accepted: August 5, 2002     

On the Methods for the Delimitation of Seasons

It is well known that air pollution is one of the major factors affecting human health and the activities in a town. Among the various air pollutants an interesting one, especially for sunny climates, is the reactive O₃. O₃ varies significantly through the year; it is therefore very important to know the onset and the duration of the warm period of the year since at that time O₃ concentrations increase significantly. In this work, an attempt was made to determine the onset of warm season of the year as well as its duration in various sites located in Northeastern Mediterranean. For this purpose, a fuzzy clustering method is used. The method was applied on the isobaric thickness between 1000 and 500 hPa for the period from 1974 to 1997. The results were compared to conventional methods based on synoptic classification and were found to be in good agreement.     

Quantifying construction and demolition waste: An analytical review

Quantifying construction and demolition (C&D) waste generation is regarded as a prerequisite for the implementation of successful waste management. In literature, various methods have been employed to quantify the C&D waste generation at both regional and project levels. However, an integrated review that systemically describes and analyses all the existing methods has yet to be conducted. To bridge this research gap, an analytical review is conducted. Fifty-seven papers are retrieved based on a set of rigorous procedures. The characteristics of the selected papers are classified according to the following criteria - waste generation activity, estimation level and quantification methodology. Six categories of existing C&D waste quantification methodologies are identified, including site visit method, waste generation rate method, lifetime analysis method, classification system accumulation method, variables modelling method and other particular methods. A critical comparison of the identified methods is given according to their characteristics and implementation constraints. Moreover, a decision tree is proposed for aiding the selection of the most appropriate quantification method in different scenarios. Based on the analytical review, limitations of previous studies and recommendations of potential future research directions are further suggested.     

Sample preparation and biomass determination of SRF model mixture using cryogenic milling and the adapted balance method

The biogenic fraction of a simple solid recovered fuel (SRF) mixture (80 wt% printer paper/20 wt% high density polyethylene) is analyzed with the in-house developed adapted balance method (aBM). This fairly new approach is a combination of combustion elemental analysis (CHNS) and a data reconciliation algorithm based on successive linearisation for evaluation of the analysis results. This method shows a great potential as an alternative way to determine the biomass content in SRF. However, the employed analytical technique (CHNS elemental analysis) restricts the probed sample mass to low amounts in the range of a few hundred milligrams. This requires sample comminution to small grain sizes (<200 μm) to generate representative SRF specimen. This is not easily accomplished for certain material mixtures (e.g. SRF with rubber content) by conventional means of sample size reduction.This paper presents a proof of principle investigation of the sample preparation and analysis of an SRF model mixture with the use of cryogenic impact milling (final sample comminution) and the adapted balance method (determination of biomass content). The so derived sample preparation methodology (cutting mills and cryogenic impact milling) shows a better performance in accuracy and precision for the determination of the biomass content than one solely based on cutting mills. The results for the determination of the biogenic fraction are within 1–5% of the data obtained by the reference methods, selective dissolution method (SDM) and ¹⁴C-method (¹⁴C-M).     

Diffusion coefficients of organics in high density polyethylene (HDPE)

Only limited data are available on the diffusion of volatile organic solvents through flexible membrane liners (FMLs) used for lining impoundments and landfills. To expand this database, a rapid, inexpensive method is needed to measure the diffusion coefficients of volatile organic solvents through FML materials. An absorption method has been developed to determine the diffusion coefficients of volatile organic solvents through FML materials. The method is based on the depletion of an organic compound from an aqueous solution due to absorption by a submerged sample of FML. A numerical solution of Fick's second law of diffusion was used to develop a graph which can be used to determine the diffusion coefficient from the time dependent concentration data. The diffusion coefficients obtained from the absorption tests were validated by comparing them with coefficients determined using a two chamber diffusion cell. The diffusion coefficients determined for toluene and xylene in high density polyethylene (HDPE) were 5.1 × 10⁻⁹ cm²s⁻¹ and 1.0 × 10⁻⁹ cm²s⁻¹ by the two methods, respectively. The data indicate that the coefficient of distribution (K_d) between the FML and the organic solution, a value which is needed to calculate the diffusion coefficient from the data, can be estimated from the log of the octanol-water partition coefficient (K_ow), a commonly measured and reported value for many chemicals.     

密切值法在土壤环境质量综合评价中的应用

建立了土壤环境质量综合评价密切值法的数学模型，并将其用于某地区农业土壤环境质量的评价，结果表明：该评价方法简单易行，评价结果准确，并可提供许多潜在的信息，是开展土壤环境质量综合评价的一种十分有效的方法。     

Determination of plate waste in primary school lunches by weighing and visual estimation methods: A validation study

The aim of this study was to validate the visual estimation method for aggregated plate waste of main dish at Portuguese primary school canteens. For this purpose plate waste at school lunch was measured for 505 individual servings, using weighing individual servings and plate waste and visual estimation method by a 6-point scale, as developed by Comstock et al. (1981). A high variability of initial serving weights was found with serving sizes ranging from 88.9 to 283.3 g and with a coefficient of variation ranging from 5.5% to 24.7%. Mean plate waste was 27.5% according to the weighing method. There was a significant bias in the conversion of the visual waste estimations to actual waste, being overestimated by an average of 8.0 g (ranging from ?12.9 g to 41.4 g). According to Bland and Altman plot, the mean difference between methods was of 8.0 g and the amplitude interval was 102.6 g. The study showed that the visual estimation method is not as accurate as the weighing method in assessing nonselective aggregated plate waste at primary school canteens. Our findings are thus very important on considering plate waste assessment, since the wide variation on initial servings introduces a relevant bias when considering standard portions or a random sample of initial servings. Although, greater convenience, time-saving and the possibility to monitor plate waste of large groups, make the visual estimation method an important method to assess plate waste at school canteens, these results highlighted the need of portions standardization and control of initial servings to allow for its use.     

Recommended methodology for measurements of PCDD and PCDF in the nordic countries

In April 1986 the Nordic Council of Ministers recommended that the Nordic countries use a specific method for measurements of polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) in flue gas emissions from waste combustion. The recommended protocol, which will be re-evaluated in a years time, includes the following.A one week registration period during which the plant is studied by continuous registration of a number of operating and emission parameters. The sampling period is included in this time.A sampling procedure based on a heated filter followed by a condenser, a bottle for the condensate and an adsorbent column. Before the sampling, at least two labelled PCDD are added to the filter.No specified analytical procedure. A labelled PCDF is added before the clean-up procedure and an injection standard before the final analysis. The laboratory is free to use any method that gives at least 25% recovery of the sampling standards and 50% recovery of the clean-up standard.Reporting requirements include homologue specific results for PCDD and PCDF containing four to eight chlorine atoms as well as isomer-specific results for the “dirty dozen”. The results should be compensated for incomplete recoveries and the factors used should be reported.     

Characteristics of azaarenes and dioxins in gases emitted from waste incinerators

In this study, we propose an analytical method to determine the fourteen of azaarenes present in flue gas samples collected according to Japanese Industrial Standard K 0311, which designates the method for the determination of dioxins in flue gas. Azaarenes can be analyzed using the acidic water phase after shaking extraction with dichloromethane, which is unnecessary for dioxin analysis. Flue gas samples were obtained from 24 waste incinerators in Japan, and azaarenes were detected in all the flue gas samples (0.21–3800 μg/m³ _N). The most abundant of the detected compounds were quinoline and isoquinoline. The concentration of azaarenes had a tendency to increase with that of polychlorinated dibenzo-p-dioxins and dibenzofurans. The isomer distribution of heptachloro-dibenzofurans (HpCDFs) was calculated using the computed Gibbs energy of formation (ΔG _f ) obtained by the semiempirical molecular orbital method at various temperatures. The calculated isomer distribution was fitted to the measured value of HpCDFs. It seems that the temperature obtained from the fitting calculations is an indicator of the cooling capacity of the combustion gas in an incinerator. The computed ΔG _f also explained the measured isomer distributions of azaarenes. It is suggested that the isomer distribution of azaarenes in the combustion process is thermodynamically controlled. This work was presented in part at the International Conference on Combustion, Incineration/Pyrolysis, and Emission Control, 2006, Kyoto     

Precision determination for the dynamic respirometric index (DRI) method used for biological stability evaluation on municipal solid waste and derived products

Dynamic respiration index (DRI) is an effective respirometric method to measure the biological stability of municipal solid waste (MSW). It allows testing MSW biological stability under standardized conditions and is now used as a routine analytical method. However, the method needs to be studied for precision parameters to ensure the quality of results generated.This work reports on a DRI validation study, detecting repeatability (r) and reproducibility limits (R). To perform the study, 4-6 Italian laboratories took part in an interlaboratory test for the validation of the DRI method on four different municipal solid wastes from different mechanical-biological treatment full-scale plants. Precision values (r and R) of DRI, expressed as relative standard deviation, were in the range of 3.6% and 15.5%, and were acceptable when compared with previous data obtained in another respirometric test. On the other hand, no regressions were found between r and R, and DRI, and as a consequence prediction of precision values was not possible a priori for different DRI levels, unless the same typology of waste was considered.     

Determination of total chlorine and bromine in solid wastes by sintering and inductively coupled plasma-sector field mass spectrometry

A sample preparation method based on sintering, followed by analysis by inductively coupled plasma-sector field mass spectrometry (ICP-SFMS) for the simultaneous determination of chloride and bromide in diverse and mixed solid wastes, has been evaluated. Samples and reference materials of known composition were mixed with a sintering agent containing Na₂CO₃ and ZnO and placed in an oven at 560 °C for 1 h. After cooling, the residues were leached with water prior to a cation-exchange assisted clean-up. Alternatively, a simple microwave-assisted digestion using only nitric acid was applied for comparison. Thereafter the samples were prepared for quantitative analysis by ICP-SFMS. The sintering method was evaluated by analysis of certified reference materials (CRMs) and by comparison with US EPA Method 5050 and ion chromatography with good agreement. Median RSDs for the sintering method were determined to 10% for both chlorine and bromine, and median recovery to 96% and 97%, respectively. Limits of detection (LODs) were 200 mg/kg for chlorine and 20 mg/kg for bromine. It was concluded that the sintering method is suitable for chlorine and bromine determination in several matrices like sewage sludge, plastics, and edible waste, as well as for waste mixtures. The sintering method was also applied for determination of other elements present in anionic forms, such as sulfur, arsenic, selenium and iodine.     

Removal of ammonium and phosphates from aqueous solutions by biochar produced from agricultural waste

The concern about protecting water quantity and quality is one of the most severe challenges of the twenty-first century since the demand for water resources grows as the population and its needs grow. Additionally, and as expected, most human activities produce wastewater containing undesirable contaminants. On the other hand, the generation of agricultural waste and its inappropriate disposal causes further problems. Current wastewater treatment methods involve a combination of physical and chemical processes, technologies, and operations to remove pollutants from effluents; adsorption is an excellent example of an effective method for wastewater treatment, and biochar is currently one of the most valuable adsorbents. This review focuses on new research about applying biochar produced from agricultural waste as a low-cost and environmentally friendly method for removing ammonium and phosphates from aqueous solutions.

     

Correction to: An automated assessment method for integrated circuit chip detachment from printed circuit board by multistep binarization and template matching of X-ray transmission images

Given the increase in digital product waste, demand for recycling of printed circuit boards (PCBs) is increasing. Precious and minor metals are often well concentrated in integrated circuit (IC) chips, especially in PCBs; hence, IC chips are primary targets for recycling. The technology for the non-destructive detachment of IC chips from PCBs is increasing in sophistication; however, the effectiveness of IC chip detachment is currently assessed manually and visually. In the present study, an automated IC chip detachment assessment method was developed, which combines multistep binarization and template matching of X-ray transmission images of crushed PCBs. To validate the method, five types of mechanically crushed PCBs from mobile phones were examined, and the developed method successfully assessed the IC chip detachment rate, with an average error rate of only 2.2% compared to visual assessment.

     

Improvement of Waste Recycling in PET Fiber Production

Production of polyethylene teraphtalate (PET) fiber in the world is increasing every year and reached to an amount of about 20 million tons a year in 2001. The wastes occur in the production of PET fiber in the amount of about 3–5% of total production. The PET does not degrade for a long time in nature. Since PET is a derivative of petroleum, the wastes of PET are valuable and must be recycled. One of the recycling method of PET wastes is re-melting. Thus, various properties of the PET wastes were improved using the re-melting method by employing an extruder manufactured for the work. Degradation during re-melting decreases the properties of the final product. The results indicate that the properties of recycled PET wastes can be monitored by designing the parameters of the extruder. Also, the further degradation of the material can be prevented and the recycling costs are minimized.     

A new approach to estimation of methane emission rates from landfills

Methane emission monitoring has become increasingly essential for diffusive area sources, especially for landfills, which contribute to a significant fraction of the total anthropogenic methane emission globally. Statutorily, methane emission rate from landfills in Germany shall be examined on a semiannual basis; however, an appropriate approach has yet to be developed and adopted for general use. In this study, a new method is proposed based on experimental results, which utilizes a TDLAS (Tunable Diode Laser Absorption Spectroscopy) instrument – GasFinder2.0® system and a dispersion model LASAT (Lagrangian Simulation of Aerosol Transport) as the measurement device and calculation model, respectively. Between April 2010 and December 2011, a research project was conducted at a pilot scale landfill in the south of Germany. Drawing on the extensive research into this pilot project, an effective strategy of measurement setup was determined. Methane concentration was measured with GasFinder2.0® system in the upstream and downstream sections of the project site, while wind and turbulence data were measured simultaneously by an ultrasonic anemometer. The average methane emission rate from the source can be calculated by using the results as input data in the dispersion model. With this method, site-specific measurement approaches can be designed for not only landfills, but also different diffusive area sources with less workload and lower cost compared to conventional FID (Flame Ionization Detector) method.     

Evaluation of thermally treated asbestos based on fiber number concentration determined by transmission electron microscopy

Appropriate treatment of asbestos waste is a significant problem. In Japan, inertization of asbestos-containing waste by novel techniques approved by the Ministry of the Environment is now promoted. A quantitative method of testing with high sensitivity to the asbestos levels present in the inertization products is required for the approval process, but many testing methods are only qualitative. Thus, we have developed an evaluation method for asbestos in inertized products, consisting of the extraction of fibers from inertized products and determination of fiber number concentration by transmission electron microscopy. We adopted this testing method to evaluate thermally treated asbestos. It was found that fiber number concentrations of thermally treated asbestos decreased with increased treatment temperature, and were below the environmental level (10² Mf/g) at more than 1000 °C for chrysotile and crocidolite and more than 1400 °C for amosite and other amphibole forms of asbestos.     

Sustainable sanitary landfills for neglected small cities in developing countries: The semi-mechanized trench method from Villanueva,Honduras

Open dumping is the most common practice for the disposal of urban solid wastes in the least developed regions of Africa, Asia and Latin America. Sanitary landfill design and operation has traditionally focused on large cities, but cities with fewer than 50,000 in population can comprise from 6% to 45% of a given country’s total population. These thousands of small cities cannot afford to operate a sanitary landfill in the way it is proposed for large cities, where heavy equipment is used to spread and compact the waste in daily cells, and then to excavate, transport and apply daily cover, and leachate is managed with collection and treatment systems. This paper presents an alternative approach for small cities, known as the semi-mechanized trench method, which was developed in Villanueva, Honduras. In the semi-mechanized trench method a hydraulic excavator is used for 1–3 days to dig a trench that will last at least a month before it is filled with waste. Trucks can easily unload their wastes into the trench, and the wastes compact naturally due to semi-aerobic biodegradation, after which the trenches are refilled and covered. The exposed surface area is minimal since only the top surface of the wastes is exposed, the remainder being covered by the sides and bottom of the trench. The surplus material from trench excavation can be valorized for use as engineering fill onsite or off. The landfill in Villanueva has operated for 15 years, using a total land area of approximately 11 ha for a population that grew from 23,000 to 48,000, with a land requirement of 0.2 m²/person year, a cover to waste ratio of 0.2, and an estimated soil surplus of 298,000 m³ that is valorized and used onsite. The landfill has been operated solely by the municipality with an operational cost in 2010 estimated at US$4.60 per ton. A modified water balance analysis at Villanueva shows negligible leachate generation from covered trenches and 700 m³/yr (60 m³/ha yr) from the two open trenches required for daily operation. If the site were an open dump, however, leachate generation is estimated to be 3900 m³/ha yr and contaminated runoff 5000 m³/ha yr. A simple model used to estimate dilution of generated leachate based on groundwater flow data and aquifer stratigraphy suggests that the leachate will be diluted by a factor of 0.01 in the aquifer. Leachate contaminants will not accumulate because the aquifer discharges to the Ulua River 2 km south of the landfill. While not suitable for all sites, the Villanueva method nevertheless serves as an excellent example of how a small city landfill with natural compaction of waste and attenuation of leachate can be sustainably operated.     

Climate balance of biogas upgrading systems

One of the numerous applications of renewable energy is represented by the use of upgraded biogas where needed by feeding into the gas grid. The aim of the present study was to identify an upgrading scenario featuring minimum overall GHG emissions. The study was based on a life-cycle approach taking into account also GHG emissions resulting from plant cultivation to the process of energy conversion. For anaerobic digestion two substrates have been taken into account: (1) agricultural resources and (2) municipal organic waste. The study provides results for four different upgrading technologies including the BABIU (Bottom Ash for Biogas Upgrading) method. As the transport of bottom ash is a critical factor implicated in the BABIU-method, different transport distances and means of conveyance (lorry, train) have been considered. Furthermore, aspects including biogas compression and energy conversion in a combined heat and power plant were assessed. GHG emissions from a conventional energy supply system (natural gas) have been estimated as reference scenario. The main findings obtained underlined how the overall reduction of GHG emissions may be rather limited, for example for an agricultural context in which PSA-scenarios emit only 10% less greenhouse gases than the reference scenario. The BABIU-method constitutes an efficient upgrading method capable of attaining a high reduction of GHG emission by sequestration of CO₂.     

Stochastic analysis of radioactive waste package performance using first-order reliability method

In order to license an underground radioactive waste repository, it is important to demonstrate regulatory compliance with authoritative regulations. Also it is evidence from NRC's criteria for waste package performance that a stochastic analysis is necessary to provide that these criteria can be met with confidence. The first-order reliability method is an attractive tool to the stochastic analysis and particularly useful when statistical information is incomplete, as is common for problems occurring in the subsurface environment. The method is based on using the first-order Taylor series expansion at a specific linearization point to calculate a measure of reliability. Results from a first-order reliability analysis include an estimate of the probability of exceeding a specified performance criteria and measures of the sensitivity of the stochastic solution to the changes in input random variables and their statistical moments. The method of stochastic analysis is illustrated by analyzing the canister corrosion in a radioactive waste package.