Review of monitoring and assessing ground vegetation biodiversity in national forest inventories

Ground vegetation (GV) is an important component from which many forest biodiversity indicators can be estimated. To formulate policies at European level, taking into account biodiversity, European National Forest Inventories (NFIs) are one of the most important sources of forest information. However, for monitoring GV, there are several definitions, data collection methods, and different possible indicators. Even though it must be considered that natural conditions in different countries form very different understory types, each one has its own cost-efficient monitoring design, and they can hardly be compared. Therefore, the development of general guidelines is a particularly complex issue. This paper is a review of data collection methods and consequently a selection of the best available methods for the set of indicators with an emphasis on GV sampling methodologies in NFIs. As a final result, recommendations on GV definitions and classifications, sampling methodologies, and indicators are formulated for NFIs. Different sampling areas are recommended for each life form (shrubs, herbs, etc.). Inventory cycles and sampling seasons (depending on the phonological stages) should be specially considered and evaluated in the results. The proposed indicators are based on composition at different levels of sampling intensity for each life form and on coverage measurements.     

Reliability of differing densities of sample grids used for the monitoring of forest condition in Europe

Concern about the possible deterioration of forest health led to the establishment in the 1980s of inventories of forest condition throughout Europe. International standardisation of the programmes was sought and a number of recommendations were made concerning sampling and assessment procedures. One of the most important rulings was that the assessment should be made on a systematic grid, the minimum density of which was 16×16 km. However, many countries adopted denser sampling grids, with 4×4 km being used in several countries and 1×1 km being used in the Netherlands. With five or more years of monitoring completed, there is a growing belief that a rapid and irreversible decline in forest health is not occurring. Consequently, some countries/regions are seeking to reduce their annual investment in forest health monitoring.The precision of national/regional estimates of forest health can be directly related to the sample size. As the sample size decreases, so also does the precision of the estimates. This is illustrated using data collected in Switzerland in 1992 and using grid densities of 4×4 km, 8×8 km, 12×12 km and 16×16 km. The value of the data is dependent on the sample size and the degree to which it is broken down (by region or species). The loss of precision associated with most subdivisions at the 8×8 km grid level remains acceptable, but a sharp deterioration in the precision occurs at the 12×12 km and 16×16 km grid levels. This has considerable implications for the interpretation of the inventories from those countries using a 16×16 km grid. In Switzerland, a reduction from the current 4×4 km grid to an 8×8 km grid (i.e. 75% reduction in sample size) would have relatively little impact on the overall results from the annual inventories of forest health.     

Sampling The Soil In Long-Term Forest Plots: The Implications Of Spatial Variation

Long-term monitoring of forest soils as part of a pan-European network to detect environmental change depends on an accurate determination of the mean of the soil properties at each monitoring event. Forest soil is known to be very variable spatially, however. A study was undertaken to explore and quantify this variability at three forest monitoring plots in Britain. Detailed soil sampling was carried out, and the data from the chemical analyses were analysed by classical statistics and geostatistics. An analysis of variance showed that there were no consistent effects from the sample sites in relation to the position of the trees. The variogram analysis showed that there was spatial dependence at each site for several variables and some varied in an apparently periodic way. An optimal sampling analysis based on the multivariate variogram for each site suggested that a bulked sample from 36 cores would reduce error to an acceptable level. Future sampling should be designed so that it neither targets nor avoids trees and disturbed ground. This can be achieved best by using a stratified random sampling design.     

Multiscale satellite and spatial information and analysis framework in support of a large-area forest monitoring and inventory update

Many countries undertake a national forest inventory to enable statistically valid monitoring in support of national and international reporting of forest conditions and change. Canada’s National Forest Inventory (NFI) program is designed to operate on a 10-year remeasurement cycle, with an interim report produced at the 5-year mid-point. The NFI is a sample-based inventory, with approximately 18,850 2 ×2-km photo plots across the country, distributed on a 20×20-km grid of sample points; these photo plots are the primary data source for the NFI. Capacity to provide annual monitoring information is required to keep policy and decision makers apprised of current forest conditions. In this study, we implemented a multistage monitoring framework and used a Moderate Resolution Imaging Spectroradiometer (MODIS) change product to successfully identify 78% of the changes in forest cover area that were captured with a Landsat change detection approach. Of the NFI photo plots that were identified by both the Landsat and MODIS approaches as having changes in forest cover, the proportion of change area within the plots was similar (R ²?=?0.78). Approximately 70% of the Landsat-derived change events occupied less than 40% of a single MODIS pixel, and more than 90% of the change events of this size were successfully detected with the MODIS product. Finally, MODIS estimates of the proportion of forest cover change at the NFI photo plot level were comparable to change estimates for the ecoregions as a whole (R ²?=?0.95). High-temporal, low-spatial resolution imagery such as MODIS, in combination with other remotely sensed data sources, can provide information on disturbance events within a national forest inventory remeasurement cycle, thereby satisfying the interim information needs of policy and decision makers as well as the requirements of national and international reporting commitments.     

Extending large-scale forest inventories to assess urban forests

Urban areas are continuously expanding today, extending their influence on an increasingly large proportion of woods and trees located in or nearby urban and urbanizing areas, the so-called urban forests. Although these forests have the potential for significantly improving the quality the urban environment and the well-being of the urban population, data to quantify the extent and characteristics of urban forests are still lacking or fragmentary on a large scale. In this regard, an expansion of the domain of multipurpose forest inventories like National Forest Inventories (NFIs) towards urban forests would be required. To this end, it would be convenient to exploit the same sampling scheme applied in NFIs to assess the basic features of urban forests. This paper considers approximately unbiased estimators of abundance and coverage of urban forests, together with estimators of the corresponding variances, which can be achieved from the first phase of most large-scale forest inventories. A simulation study is carried out in order to check the performance of the considered estimators under various situations involving the spatial distribution of the urban forests over the study area. An application is worked out on the data from the Italian NFI.     

Consistency of observations of forest tree defoliation in three European countries

The crown densities of 186 trees of five common European tree species (Norway spruce (Picea abies), silver fir (Abies alba), Scots pine (Pinus sylvestris), oak (Quercus robur) and beech (Fagus sylvatica) were assessed simultaneously by observation teams from France, Germany and the United Kingdom. Major differences in the scores existed, with the maximum difference on any one tree being 45%. Differences tended to be consistent, with the French team scoring more lightly than the German team and the German team more lightly than the UK team. The differences throw into question the value of international comparisons of forest condition, particularly the use of comparative tables of the extent of forest decline in individual European countries.     

Improving the precision of sample-based forest damage inventories through two-phase sampling and post-stratification using remotely sensed auxiliary information

Many countries have a national forest inventory (NFI) designed to produce statistically sound estimates of forest parameters. However, this type of inventory may not provide reliable results for forest damage which usually affects only small parts of the forest in a country. For this reason, specially designed forest damage inventories are performed in many countries, sometimes in coordination with the NFIs. In this study, we evaluated a new approach for damage inventory where existing NFI data form the basis for two-phase sampling for stratification and remotely sensed auxiliary data are applied for further improvement of precision through post-stratification. We applied Monte Carlo sampling simulation to evaluate different sampling strategies linked to different damage scenarios. The use of existing NFI data in a two-phase sampling for stratification design resulted in a relative efficiency of 50 % or lower, i.e., the variance was at least halved compared to a simple random sample of the same size. With post-stratification based on simulated remotely sensed auxiliary data, there was additional improvement, which depended on the accuracy of the auxiliary data and the properties of the forest damage. In many cases, the relative efficiency was further reduced by as much as one-half. In conclusion, the results show that substantial gains in precision can be obtained by utilizing auxiliary information in forest damage surveys, through two-phase sampling, through post-stratification, and through the combination of these two approaches, i.e., post-stratified two-phase sampling for stratification.     

野外无人值守森林实时监控与报警系统研究

随着中国森林的过度砍伐,森林面积急剧减少,对植被的保护刻不容缓。但由于人力物力有限,无法对大量的野生植被进行实时巡视,造成大量野生植被的滥砍滥伐。采用数字摄像头作为采集终端,利用太阳能电池作为可移动电源,结合 GPS 和 GSM的智能控制板,实现植被状况的前端智能判断与实时监控。     

Status and future of the forest health indicators program of the USA

For two decades, the US Department of Agriculture, Forest Service, has been charged with implementing a nationwide field-based forest health monitoring effort. Given its extensive nature, the monitoring program has been gradually implemented across forest health indicators and inventoried states. Currently, the Forest Service??s Forest Inventory and Analysis program has initiated forest health inventories in all states, and most forest health indicators are being documented in terms of sampling protocols, data management structures, and estimation procedures. Field data from most sample years and indicators are available on-line with numerous analytical examples published both internally and externally. This investment in national forest health monitoring has begun to yield dividends by allowing evaluation of state/regional forest health issues (e.g., pollution and invasive pests) and contributing substantially to national/international reporting efforts (e.g., National Report on Sustainability and US EPA Annual Greenhouse Gas Estimates). With the emerging threat of climate change, full national implementation and remeasurement of a forest health inventory should allow for more robust assessment of forest communities that are undergoing unprecedented changes, aiding future land management and policy decisions.     

Canada's National Forest Inventory (Responding to Current Information Needs)

Canada's current National Forest Inventory is a periodic compilation of existing inventory material from across the country. While the current approach has many advantages, it lacks information on the nature and rate of changes to the resource, and does not permit projections or forecasts. Beinga compilation of inventories of different dates, the current national forest inventory cannot reflect the current state ofthe forests and therefore cannot be used as a satisfactory baseline for monitoring change. The current format of Canada's National Forest Inventory has served its purpose by providingnational statistical compilations and reporting. However, itsuseful life is coming to a conclusion. To meet new demands, Canada is considering a new National Forest Inventory design consisting of a plot-based system of permanent observational units located on a national grid. The objective of the new inventory design is to assess and monitor the extent, state andsustainability of Canada's forests in a timely and accurate manner. Details of the new inventory design are described. A strategy to respond to Canada's national and international forest reporting commitments through a National Forest Information System is also discussed.     

Multi-stand Forest Management under a Climatic Risk: Do Time and Risk Preferences Matter?

We propose a stochastic dynamic programming framework to model the management of a multi-stand forest under climate risk (strong wind occurrence). The preferences of the forest-owner are specified by a non-expected utility in order to separately analyze intertemporal substitution and risk aversion effects. A numerical method is developed to characterize the optimal forest management policies and the optimal consumption-saving strategy. The stochastic dynamic programming framework is applied to a non-industrial private forest-owner located in North-East of France. We show that the optimal decisions both depend upon risk and time preferences. The authors would like to thank participants at the international conference on Economics of Sustainable Forest Management in Toronto, at the PARIS 1 seminar on Environmental and Natural Resource Economics, at the 2004 Applied Microeconomics Conference in Lille and at the 13th annual conference of the European Association of Environmental and Resource Economists at Budapest.     

Using Spatial Pattern to Quantify Relationship Between Samples, Surroundings, and Populations

The need for accurate carbon budgeting, climate change modelling, and sustainable resource management has lead to an increase in the number of large area forest monitoring programs. Large area forest monitoring programs often utilize field and remotely sensed data sources. Sampling, via field or photo plots, enables the collection of data with the desired level of categorical detail in a timely and efficient manner. When sampling, the aim is to collect representative detailed data enabling the statistical reporting upon the characteristics of larger areas. As a consequence, approaches for investigating how well sample data represent larger areas (i.e., the sample neighbourhood and the population) are desired. Presented in this communication is a quantitative approach for assessing the nature of sampled areas in relation to surrounding areas and the overall population of interest. Classified Landsat data is converted to forest/non-forest categories to provide a consistent and uniform data set over a 130,000 km² study region in central British Columbia, Canada. From this larger study area 322 2 × 2 km photo plots on a 20 × 20 km systematic grid are populated with composition and configuration information for comparison to non-sampled areas. Results indicate that typically, within the study area, the spatial pattern of forest within a photo plot is representative of the forest patterns found within primary and secondary neighbourhoods and over the entire population of the study. These methods have implications for understanding the nature of data used in monitoring programs worldwide. The ability to audit photo and field plot information promotes an increased understanding of the results developed from sampling and provides tools identifying locations of possible bias.     

连云港港区海洋环境质量状况

为分析连云港海洋环境质量,对连云港港区水质、沉积物及生物因子进行监测。结果表明,港区内某些点位水质中无机氮含量较高,达到污染程度,其余点位监测指标均正常,沉积物中的重金属尚未对该海域造成污染。浮游植物31种,其中甲藻门8种,硅藻门23种,浮游植物数量变动为1.84×104m-3~1.16×105m-3;底栖生物17种,多样性指数平均值为1.89。港区内水域环境时空变化表明,海水中锌含量连续大幅增加,其余指标均下降50%,沉积物重金属含量变化不大。     

Deposition fluxes of PCDD/Fs in the area surrounding a steel plant in northwest Italy

The paper aims at investigating the contribution of a steel plant located in a rural area in northwestern Italy (700,000 tons of steel/year) to the deposition fluxes of Polychorinated Dibenzo-p-dioxins and Polychorinated dibenzofurans (PCDD/PCDFs) at local level through the analysis of sampling data, literature data, and air dispersion model (AERMOD)output data. Total measured deposition fluxes of PCDD/PCDFs in three monitoring stations were consistent with other studies carried out in Italy in urban and suburban areas and in rural European areas; while these were lower than those measured in other European urban/suburban areas or in sites influenced by industrial sources. Furthermore, the measured fluxes were also compared with the pattern of PCDD/Fs in ambient air sampled at the same sites in a previous study. This comparison showed a similarity between air concentration and deposition patterns of the samples collected at the three monitoring stations and a clear distinction of these from the source. The study was completed with AERMOD simulations, conducted with a mass mean particle diameter of 0.5 μm, according to the particle size distribution of the samples collected at the source. AERMOD calculated deposition fluxes of two to three orders of magnitude lower than those measured in two monitoring points; while in the most distant monitoring station, the deposition fluxes were too low to be calculated by the model. The simulations confirmed that the most distant monitoring station was not subject to emissions from the steel plant. The analysis highlighted the limited influence of the source in the local PCDD/F deposition fluxes.     

Detecting Differences in Crown Transparency Assessments Between Countries using the Image Analysis System Croco

Estimates of crown transparency calculated using the semi-automatic image analysis system CROCO were compared withthe visual estimates of survey teams from 12 European countries.For each of five European species (Norway spruce (Picea abies (L.) Karst.), silver fir (Abies alba Mill.), Scotspine (Pinus sylvestris L.), beech (Fagus sylvatica L.), oak (Quercus robur L.)) 15 trees were assessed. In 64\% of the comparisons, CROCO estimates and the survey teams' scores differed significantly, while differences between countries were significant in 58 % of all comparisons. We calculated Spearman's rank correlation and the standard deviation of the differences between CROCO and each country and between pairs of countries. We then computed the medians for CROCO and each country. CROCO and only a few countries hadfor all species a higher median correlation and lower median standard deviation than the median for the comparison between countries. In addition no country had a consistently higher correlation or lower standard deviation than CROCO. We concludethat CROCO can provide more consistent and less variable estimates of crown transparency than visual assessments and that it can serve as a reference to detect differences in visualtransparency assessments between countries over time.     

Towards a long-term integrated monitoring programme in Europe: network design in theory and practice

Long-term integrated monitoring is an important approach forinvestigating, detecting and predicing the effects ofenvironmental changes. Currently, European freshwaters,glaciers, forests and other narural and semi-natural ecosystemsand habitats are monitored by a number of networks establishedby different organisations. However, many monitoring programmeshave a narrow focus (e.g. targeting individual ecosystems) andmost have different measurement protocols and sampling design.This has resulted in poor integration of ecosystem monitoring ata European level, leading to some overlapping of efforts and alack of harmonised data to inform policy decisions. The need fora consistent pan-European long-term integrated monitoring ofterrestrial systems programme is recognised in the scientificcommunity. However, the design of such a system can be problematic, not least because of the constraints imposed bythe need to make maximum use of existing sites and networks.Based on the outcomes of the NoLIMITS project (Networking ofLong-term Integrated Monitoring in Terrestrial Systems), thisarticle reviews issues that should be addressed in designing aprogramme based on existing monitoring sites and networks. Fourmajor design issues are considered: (i) users' requirements,(ii) the need to address multiple objectives, (iii) role ofexisting sites and (iv) operational aspects.     

放射性核素污染及监测

由于发达国家的核试验和核电站的建设，放射性核素对环境的污染已引起世界各国的关注。我国目前实施对放射性强度的监测，而对核素监测相对比较薄弱。文章介绍了核设施泄露事故对大气、水和水生生物造成的污染及污染的削减过程，综述了目前发达国家的放射性核素污染水平、监测的核素种类和监测方法。     

The European eel quality database: towards a pan-European monitoring of eel quality

The stocks of the European eel Anguilla anguilla are in decline and there is an increasing awareness that poor health status due to contaminants and/or diseases might be a key element in this decline and might be a hindrance to recovery. Many countries have started compiling data on the health status of eels in their water bodies. Objectives for these monitoring actions are diverse and there is a large amount of information collected by EU member countries. However, this information is widely scattered over Europe in agencies, institutes or universities. As there is a growing need to collect and report on data on the health status of the eel on international level, the Joint EIFAC/ICES Working Group on Eels initiated in September 2007 the set up of an European Eel Quality Database to collect recent data of contaminants and diseases over the distribution area of the eel. This paper describes the aim, the set up and future development of the database in order to give it greater publicity and to call on scientists or managers to submit data on eel health status. The database represents now the first comprehensive pan-European compilation of eel health data, including data from over 10,000 eels from approximately 1,200 sites over 14 countries. Preliminary work has indicated a number of shortcomings and future developments will be needed. Guaranteeing further development of the database, harmonisation of methods, quality assurance, and setting up harmonised eel monitoring strategies over Europe will be a great challenge and will need pan-European cooperative work.     

The LUCAS topsoil database and derived information on the regional variability of cropland topsoil properties in the European Union

Approximately 20,000 topsoil samples were collected in 25 European Union (EU) Member States (EU-27 except Bulgaria and Romania) with the aim to produce the first coherent pan-European physical and chemical topsoil database, which can serve as baseline information for an EU wide harmonized soil monitoring. The soil sampling was undertaken within the frame of the Land Use/Land Cover Area Frame Survey (LUCAS), a project to monitor changes in the management and character of the land surface of the EU. Soil samples have been analysed for basic soil properties, including particle size distribution, pH, organic carbon, carbonates, NPK, cation exchange capacity (CEC) and multispectral signatures. Preliminary studies show the outstanding potential of the dataset for enhancing the knowledge base on soils in the EU. The current paper provides an introduction to the LUCAS Topsoil 2009 project and provides an example of data applicability for cropland assessment by highlighting initial results for regional and national comparisons.