Characterization of phosphorus species and modeling for its organic forms in eutrophic shallow lake sediments,North China

Variations of phosphorus （P） and its species in surface sediment of Baiyangdian Lake, a eutrophic shallow lake located in North China, were investigated through combination of field survey and numerical calculation based on cluster analysis. P fractionation was performed by a sequential extraction scheme, categorized as loosely bound P （NH4Cl-P）, reductant soluble P （BD-P）, metallic oxide bound P （NaOH-P）, calcium bound P （HCl-P） and organic P （Org-P）. P concentrations exhibited regional similarities and a total of four sub-areas were identified in which the same rank was HCl-P 〉 Org-P 〉 BD-P ,=NaOH-P 〉NH4Cl-E NH4Cl-P, BD-P and Org-P were found to contribute to P enrichment in overlying water column. Specifically, labile Org-P acted as a potential pool with a greater contribution in aerobic layer compared to anaerobic layer. A hysteresis （lag = 4 months） existed when labile Org-P concentration was negatively correlated with aerobic layer thickness. In view of magnitude of identified P contributors in sub-areas, higher potential of P release was present in Fuhe River and Tang River estuary areas. On the basis of calibration and verification, the mathematical model with parameter settings applied in this study was improved to serve as a tool for limnology management and eutrophic control.     

Remediation of soil heavily polluted with polychlorinated biphenyls using a low-temperature plasma technique

Polychlorinated biphenyls （PCBs） were removed by low-temperature plasma technique （dielectric barrier discharge） from heavily polluted soil and their intermediate products were analyzed. The removal rate ranged from 40.1 to 84.6% by different treatments, and they were also influenced significantly （P 〈 0.01） by soil particle-size, electric power, gas flow rate and reaction time. The optimal reaction conditions of PCB removal from the soil were obtained experimentally when soil particle-size, electrical power, flow rate and reaction time were 5-10mm, 21w, 120mL. rain and 90rain, respectively. However, decreasing electrical power, flow rate and reaction time to 18 w, 60 mL. min- and 60 min respectively were also acceptable in view of the cost of remediation. This technique was characterized by the additional advantage of thorough oxidation of PCBs in the soil, with no formation of intermediate products after reaction. The technique therefore shows some promise for application in the remediation of soils contaminated with persistent organic pollutants in brown field sites in urban areas.     

Total phosphorus concentrations in surface water of typical agro- and forest ecosystems in China, 2004–2010

The concentrations of total phosphorus （TP） from 83 surface water sampling sites in 29 of the Chinese Ecosystem Research Network （CERN） monitored ecosystems, representing typical agro- and forest ecosystems, were assessed using monitoring data collected between 2004 and 2010 from still and flowing surface water. Results showed that, TP concentrations were significantly higher in agro-ecosystems than those in forest ecosystems both for still and flowing surface water. For agro- ecosystems, TP concentrations in the southern area were significantly higher than those in the northern and north- western areas for both still and flowing surface water, however no distinct spatial pattern was observed for forest ecosystems. In general, the median values of TP within agro- and forest ecosystems did not exceed the Class V guideline for still （0.2mg.L-1） or flowing （0.4mg.L-1） surface water, however, surface water at some agro- ecosystem sampling sites was frequently polluted by TE Elevated concentrations were mainly found in still surface water at the Changshu, Fukang, Linze and Naiman monitored ecosystems, where exceedance （〉 0.2 mg.L-1） frequencies varied from 43% to 78%. For flowing water, elevated TP concentrations were found at the Hailun, Changshu and Shapotou monitored ecosystems, where exceedance （〉 0.4 mg. L-1） frequencies varied from 29% to 100%. Irrational fertilization, frequent irrigation and livestock manure input might be the main contributors of high TP concentrations in these areas, and reduced fertilizer applications, improvements in irrigation practices and centralized treatment of animal waste are necessary to control P loss in these TP vulnerable zones.     

Application of probabilistic risk assessment at a coking plant site contaminated by polycyclic aromatic hydrocarbons

Application of Probabilistic Risk Assessment （PRA） and Deterministic Risk Assessment （DRA） at a coking plant site was compared. By DRA, Hazard Quotient （HQ） following exposure to Naphthalene （Nap） and Incremental Life Cancer Risk （ILCR） following exposure to Benzo（a）pyrene （Bap） were 1.87 and 2.12 × 104. PRA revealed valuable information regarding the possible distribution of risk, and risk estimates of DRA located at the 99.59th and 99.76th percentiles in the risk outputs of PRA, which indicated that DRA overestimated the risk. Cleanup levels corresponding acceptable HQ level of 1 and ILCR level of 104 were also calculated for both DRA and PRA. Nap and Bap cleanup levels were 192.85 and 0.14mg.kg-1 by DRA, which would result in only 0.25% and 0.06% of the exposed population to have a risk higher than the acceptable risk, according to the outputs of PRA. The application of PRA on cleanup levels derivation would lift the cleanup levels 1.9 times for Nap and 2.4 times for Bap than which derived by DRA. For this coking plant site, the remediation scale and cost will be reduced in a large portion once the method of PRA is used. Sensitivity analysis was done by calculating the contribution to variance for each exposure parameter and it was found that contaminant concentration in the soil （Cs）, exposure duration （ED）, total hours spent outdoor per day （ETout）, soil ingestion rate （IRs）, the air breathing rate （IRa） and bodyweight （BW） were the most important parameters for risk and cleanup levels calculations.     

Spent rechargeable lithium batteries in e-waste: composition and its implications

The amount of spent rechargeable lithium batteries （RLBs） is growing rapidly owing to wide application of these batteries in portable electronic devices and electric vehicles, which obliges that spent RLBs should be handled properly. Identification of spent RLBs can supply fundamental information for spent RLBs recycling. This study aimed to determine the differences of physical components and chemical compositions among various spent RLBs. All the samplings of RLBs were rigorously dismantled and measured by an inductive coupled plasma atomic emission spectrometer. The results indicate that the average of total weight of the separator, the anode and the cathode accounted for over 60% of all the RLBs. The weight ratio of valuable metals ranged from 26% to 76%, and approximately 20% of total weight was Cu and Al. Moreover, no significant differences were found among different manufacturers, applications, and electrolyte types. And regarding portable electronic devices, there is also no significant difference in the Co-Li concentration ratios in the leaching liquid of RLBs.     

Decontamination efficiency and root structure change in the plant-intercropping model in vertical-flow constructed wetlands

Subtropical climatic conditions can contribute to the death of the aerial parts of constructed wetland plants in winter. This presents a barrier to the widespread application of constructed wetland and is an issue that urgently needs to be solved. Three contrasting experi- ments, the plant-intercropping model （A）, the warm- seasonal plant model （B）, and the non-plant model （C）, were studied in terms of their efficiency in removing pollutants, and the change in root structure of plants in the plant-intercropping model within the vertical-flow con- structed wetlands. The results indicate that model A was able to solve the aforementioned problem. Overall, average removal rates of three pollutants （CODcr, total nitrogen （TN） and total phosphorous （TP）） using model A were significantly higher than those obtained using models B and C （P 〈 0.01）. Moreover, no significant differences in removal rates of the three pollutants were detected between A and B during the higher temperature part of the year （P〉 0.05）. Conversely, removal rates of the three pollutants were found to be significantly higher using model A than those observed using model B during the lower temperature part of the year （P 〈 0.01）. Furthermore, the morphologies and internal structures of plant roots further demonstrate that numerous white roots, whose distribution in soil was generally shallow, extend further under model A. The roots of these aquatic plants have an aerenchyma structure composed of parenchyma cells, therefore, roots of the cold-seasonal plants with major growth advantages used in A were capable of creating a more favorable vertical-flow constructed wetlands media- microenvironment. In conclusion, the plant-intercropping model （A） is more suitable for use in the cold environment experienced by constructed wetland during winter.     

Removal of 17β-estradiol in laccase catalyzed treatment processes

The removal of 17β-estradiol （E2） in laccase catalyzed oxidative coupling processes was systematically studied in this work. We focused on the influence of pH and natural organic matter （NOM） on the performance of the enzymatic treatment processes. It was found that the optimal pH for E2 removal was between 4 and 6. The removal of E2 was slightly inhibited in the presence of NOM. Enzymatic transformation of E2 was second-order in kinetics with first-order to both the concentrations of the enzyme and contaminant. Mass spectrum （MS） analysis suggested that coupling products were formed through radical-radical coupling mechanism. The results of this study demonstrated that laccase catalyzed oxidative coupling process could potentially serve as a treatment strategy to control steroid estrogens.     

Charge and separation characteristics of nanofiltration membrane embracing dissociated functional groups

The current work focused on the investigation of charge and separation characteristics of nanofiltration （NF） membrane embracing dissociated functional groups under different electrolyte solutions. The electro-kinetic method was carried out to assess the membrane volume charge density （X） with different salt concentrations ranging from 0.1 to 10 mol. m-3 and different electrolyte species, such as type 1-1, type 2-1 and type 3-1. The Donnan steric pore model-dielectric exclusion （DSPM- DE） model was employed to evaluate the separation characteristics of the NF membrane for wide range of electrolyte concentration （from 25.7 to 598.9mol·m^-3）. The results indicated that the dissociation of the hydro- philic functional groups and the specific adsorption contributed to charge formation on membrane surface. The former played a dominant role in type 1-1 and type 2-1 electrolytes at dilute aqueous solutions （0.1-0.5 mol · m^3）. However, for type 3-1 electrolyte, specific adsorp- tion should contribute to the charge effect to a large extent. Moreover, the correlation between the volume charge density and feed concentration was in accordance with Freundlich isotherm. Furthermore, it was found that the separation characteristic of NF membrane could be evaluated well by DSPM-DE model coupling with electro-kinetic method in a whole concentration range.     

Assessment of metals in dry-toilet collected matters from suburban areas of Ulaanbaatar,Mongolia, using biosolids quality guidelines and potential ecological risk index

Dry-toilet collected matter （DCM） from traditional dry-toilet pits are a potential health and ecological risk in suburban areas. In this study, the characteristics of metals in DCMs from suburban areas of Ulaanbaatar were surveyed. The results indicate that DCMs contain a high percentage of organic matter and nutrients, while heavy metals are at low levels, which shows good agricultural potential. The concentration ranges of Cr, Cu, Hg, Ni, Pb, and Zn were 11±5, 46±9, 0.08±0.05, 9±3, 17±9, and 338±86mg·kg^-1, respectively. The concentration of Cd was below 0.5 mg.kgl, and a high positive relation was shown between chromium and nickel concentrations. The heavy metals in DCMs were safe for land application but Zn in DCMs was close to the effects range median （ERM）, which is toxic in some cases, such as amphipod bioassays. Because it is mandatory to treat DCMs to reduce pathogens, in the case of heavy metal enrichment and agricultural reuse, composting or pyrolysis are better choices than incinera- tion. Compared with global soil background values, the heavy metals in DCMs showed a low level of ecological risk, but a medium level when compared with Mongolian soil background values. The ecological risk of six heavy metals was in the descending order Hg 〉 Cu 〉 Zn 〉 Pb 〉 Ni 〉 Cr and the contribution rate of Hg exceeded 60%.     

Removal of non-point pollutants from bridge runoff by a hydrocyclone using natural water head

A hydrocyclone using natural water head provided by bridge was operated for the treatment of stormwater runoff. The hydrocyclone was automatically controlled using electronic valve which is connected to a pressure meter. Normally the hydrocyclone was open during dry days, but it was closed after the capture of the first flush. The results indicated that the average pressure and the flow rate were directly affected by the rainfall intensity. The pressure head was more than 2 m when the rainfall intensity was above 5mm·h^-1. The percentage volume of underflow with high solids concentration decreased as the pressure and flow rate increased, but the percentage volume of overflow with almost no solids showed the opposite behavior. The total suspended solids （TSS） concentration ratio between the overflow and inflow （TSSover/TSSin） decreased as a function of the operational pressure, while the corresponding ratio of underflow to inflow （TSSunaer/TSSi,） increased. The TSS separation efficiency was evaluated based on a mass balance. It ranged from 25% to 99% with the pressure head ranging from 1.4 to 9.7 m, and it was proportional to pressure and flow rate. Normally, the efficiency was more than 50% when the pressure was higher than 2 m. The analysis of the water budget indicated that around 13% of the total runoff was captured by the hydrocyclone as a first flush, and this runoff was separated as underflow and overflow with the respective percentage volumes of 29% and 71%. The pollutants budget was also examined based on a mass balance. The results showed that the percentage of TSS, chemical oxygen demand （COD）, total nitrogen （TN）, and total phosphorus （TP） in underflow were 73%, 59%, 7.6%, and 49%, respectively. Thus, it can be concluded that the hydrocyclone worked well. It separated the first flush as solids-concentrated underflow and solids-absent overflow, and effectively reduced the runoff volume needing further treatment. Finally, four types of optional post treatment design are presented and compared.     

Occurrence and fate of antibiotics in advanced wastewater treatment facilities and receiving rivers in Beijing,China

The occurrence and removal of 13 antibiotics were investigated in five wastewater treatment plants （WWTPs） with advanced wastewater treatment processes in Beijing, China. Most of the target antibiotics were detected in the secondary and tertiary effluents, with the concentrations of 4.8-1106.0 and 0.3-505.0ng·L^-1. Fluoroquinolone antibiotics showed relatively high concentrations in all samples （782-1814ng·L^-1）. Different tertiary treatment processes showed discrepant antibiotics removal performances. Ozonation process was found more effective in removing target antibiotics compared to the coagulation-flocculation-sedimentation process and sand filtration process. Investigation of the target antibiotics in three typical urban rivers in Beijing was carried out to understand antibiotics occurrence in surface water environment. Eight antibiotics were detected in the studied rivers, with highest concentration of antibiotics in the fiver which was mainly replenished by reclaimed water. This study showed the necessity of employing more effective advanced treatment facilities to further reduce the discharge amount of antibiotics.     

Occurrence of estrogenic endocrine disrupting chemicals concern in sewage plant effluent

The purpose of this study was to give a worldwide overview of the concentrations of typical estrogenic endocrine disrupting chemicals （EDCs） in the effluent of sewage plants and then compare the concentra- tion distribution of the estrogenic EDCs in ten countries based on the survey data of the estrogenic EDCs research. The concentrations of three main categories （totally eight kinds） of estrogenic EDCs including steroidal estrogens （estrone （El）, estradiol （E2）, estriol （E3） and 17a- ethynylestradiol （EE2））, phenolic compounds （nonylphe- nol （NP） and bisphenol A （BPA）） and phthalate esters （dibutyl phthalate （DBP） and dibutyl phthalate （2- ethylhexyl） phthalate （DEHP）） in the effluents of sewage plants reported in major international journals over the past decade were collected. The statistics showed that the concentration distributions of eight kinds of EDCs were in the range of ng·L^-1 to μg·L^-1. The concentrations of steroidal estrogens mainly ranged within 50.00 ng. L-1, and the median concentrations of El, E2, E3 and EE2 were 11.00, 3.68, 4.90 and 1.00 ng·L^-1, respectively. Phenolic compounds and phthalate esters were found at pg. L-1 level （some individual values were at the high level of 40.00 μg·L^-1）. The median concentrations of BPA, NP, DBP and DEHP were 0.06, 0.55, 0.07 and 0.88 μg·L^-1, respectively. The concentrations of phenolic compounds and phthalate esters in the effluents were higher than that of steroids estrogens. The analysis of the concentration in various ten countries showed that steroids estrogens, phenolic compounds and phthalate esters in sewage plant effluents were detected with high concentration in Canada, Spain and China, respectively.     

Combined biologic aerated filter and sulfur/ceramisite autotrophic denitrification for advanced wastewater nitrogen removal at low temperatures

An innovative advanced wastewater treatment process combining biologic aerated filter （BAF） and sulfur/ ceramisite-based autotrophic denitrification （SCAD） for reliable removal of nitrogen was proposed in this paper. In SCAD reactor, ceramisite was used as filter and Ca （HCO3）2 was used for supplying alkalinity and carbon source. The BAF-SCAD was used to treat the secondary treatment effluent. The performance of this process was investigated, and the impact of temperature on nitrogen removal was studied. Results showed that the combined system was effective in nitrogen removal even at low temperatures （8℃）. Removal of total nitrogen （TN）, NH4＋ -N, NO3-N reached above 90% at room temperature. Nitrification was affected by the temperature and nitrification at low temperature （8℃） was a limiting factor for TN removal. However, denitrification was not impacted by the temperature and the removal of NO3 -N maintained 98% during the experimental period. The reason of effective denitrification at low temperature might be the use of easily dissolved Ca（HCO3）2 and high-flux ceramisite, which solved the problem of low mass transfer efficiency at low temperatures. Besides, vast surface area of sulfur with diameter of 2-6 mm enhanced the rate of microbial utilization. The removal of nitrate companied with the production of SO42-, and the average concentration of SO27 was about 240mg.L^-1. These findings would be beneficial for the application of this process to nitrogen removal especially in the winter and cold regions.     

Cadmium and lead toxicity and bioaccumulation in Microcystis aeruginosa

The growth of human population leads to intensification of agriculture and promotes, through eutrophication, development of cyanobacteria. One of the most widespread and bloom-forming species in freshwater is toxic Microcystis aeruginosa （M. aeruginosa）. Combustion of fossil fuels and metallurgical processes are the main sources of heavy metals contamination in surface water including cadmium （Cd） and lead （Pb）. The following study was conducted in order to determine the effect of 1- 20 mg. L-1 of Cd and Pb on photochemistry （using flow cytometry） and growth （based on chlorophyll concentra- tion） ofM. aeruginosa as well as to estimate levels of metal bioaccumulation. We have found that 1-10mg.L-1 of Cd and 1-5 rag. L1 of Pb induced continuous enhancement of chlorophyll fluorescence during 24 h of incubation. No significant degradation of chlorophyll was observed in these samples. At higher concentrations of 20 mg. L-1 of Cd and 10-20 mg.L-1 of Pb chlorophyll level significantly decreased and its fluorescence was quenched. M. aeruginosa demonstrated high capability of Cd and Pb bioaccumulation, proportionally to initial metal concentration. In samples with initial concentration of 20 mg. L-1 of Cd and Pb bioaccumulation of 87.3% and 90.1% was observed, respectively. Our study demonstrates that M. aeruginosa can potentially survive in highly metals polluted environments, be a primary source of toxic metals in the food chain and consequently contribute to enhanced toxicity of heavy metals to living organisms including human.     

Laboratory study on high-temperature adsorption of HCI by dry-injection of Ca（OH）2 in a dual-layer granular bed filter

Combustion-generated hydrogen chloride （HCl） is considered to be a very hazardous acid gaseous pollutant. This paper presents a laboratory study on the dry adsorption of HCl. The experiments were conducted in a dual-layer granular bed filter, at gas temperatures of 500℃-700℃ and n（Ca）/n（Cl）molar ratios of 1.0-5.0 using the silver nitrate titration method by dry adsorbent powders Ca（OH）2. Mainly, the adsorption efficiency of HCI and utilization efficiency of Calcium were studied, by varying relevant factors including n（Ca）/n（Cl）, tempera- ture, feeding method, water vapor and CO2. With a relatively higher HCl concentration of 1000ppm, the experimental results revealed that 600℃ may be the optimum temperature for HCl adsorption when optimum n （Ca）/n（Cl） was 2.5 in our tests. The results also demonstrated that the feeding at a constant pressure was more effective, and the HCl adsorption efficiency could rapidly reach over 90% with n（Ca）/n（Cl） = 2.5 at 600℃. Furthermore, the HCl adsorption efficiency was found to be slightly promoted by water vapor, while could be impeded by CO2, and the utilization efficiency of calcium could be up to 74.4% without CO2, while was only 36.8% with CO2 when n（Ca）/n（Cl） was 2.5 at 600℃.     

Abundance and distribution of ammonia-oxidizing archaea in Tibetan and Yunnan plateau agricultural soils of China

As low oxygen and high ultraviolet （UV） exposure might significantly affect the microbial existence in plateau, it could lead to a specialized microbial community. To determine the abundance and distribution of ammonia-oxidizing archaea （AOA） in agricultural soil of plateau, seven soil samples were collected respectively from farmlands in Tibet and Yunnan cultivating the wheat, highland-barley, and colza, which are located at altitudes of 3200-3800 m above sea level. Quantitative PCR （q-PCR） and clone library targeting on amoA gene were used to quantify the abundances of AOA and ammonia-oxidizing bacteria （AOB）, and characterize the community structures of AOA in the samples. The number of AOA cells （9.34 × 10^7-2.32× 10^8 g^-1 soil） was 3.86-21.84 times greater than that of AOB cells （6.91 × 10^6-1.24 × 10^8 g^-1 soil） in most of the samples, except a soil sample cultivating highland- barley with an AOA/AOB ratio of 0.90. Based Kendall＇s correlation coefficient, no remarkable correlation between AOA abundance and the environmental factor was observed. Additionally, the diversities of AOA community were affected by total nitrogen and organic matter concentration in soils, suggesting that AOA was probably sensitive to several environmental factors, and could adjust its community structure to adapt to the environmental variation while maintaining its abundance.     

Performance of a hybrid anaerobic-contact oxidation biofilm baffled reactor for the treatment of decentralized molasses wastewater

A novel hybrid anaerobic-contact oxidation biofilm baffled reactor （HAOBR） was developed to simultaneously remove nitrogenous and carbonaceous organic pollutants from decentralized molasses wastewater in the study. The study was based on the inoculation of anaerobic granule sludge in anaerobic compartments and the installation of combination filler in aerobic compartments. The performance of reactor system was studied regarding the hydraulic retention time （HRT）, microbial characteristics and the gas water ratio （GWR）. When the HRT was 24h and the GWR was 20：1, total ammonia and chemical oxygen demand （COD） of the effluent were reduced by 99% and 91.8%, respectively. The reactor performed stably for treating decentralized molasses wastewater. The good performance of the reactor can be attributed to the high resistance of COD and hydraulic shock loads. In addition, the high solid retention time of contact oxidation biofilm contributed to stable performance of the reactor.     

Improvement of nitrification efficiency by bioaugmentation in sequencing batch reactors at low temperature

Bioaugmentation is an effective method of treating municipal wastewater with high ammonia concentration in sequencing batch reactors （SBRs） at low temperature （10℃）. The cold-adapted ammonia- and nitrite- oxidizing bacteria were enriched and inoculated, respectively, in the bioaugmentation systems. In synthetic wastewater treatment systems, the average NH4＋-N removal efficiency in the bioaugmented system （85%） was much higher than that in the unbioaugmented system. The effluent NH4＋ -N concentration of the bioaugmented system was stably below 8 mg. L1 after 20 d operation. In municipal wastewater systems with bioaugmentation, the effluent NH4＋- -N concentration was below 8 mg·L^-1 after 15 d operation. The average NH4＋ -N removal efficiency in unbioaugmentation system （about 82%） was lower compared with that in the bioaugmentation system. By inoculating the cold-adapted nitrite-oxidizing bacteria （NOB） into the SBRs after 10 d operation, the nitrite concentration decreased rapidly, reducing the NO2 -N accumulation effectively at low temperature. The func- tional microorganisms were identified by PCR-DGGE, including uncultured Dechloromonas sp., uncultured Nitrospira sp., Clostridium sp. and uncultured Thauera sp. The results suggested that the cold-adapted microbial agent of ammonia-oxidizing bacteria （AOB） and NOB could accelerate the start-up and promote achieving the stable operation of the low-temperature SBRs for nitrification.     

Evaluation of endocrine disruption and dioxin-like effects of organic extracts from sewage sludge in autumn in Beijing,China

Study on effective disposal and utilization of sewage sludge has recently been the target of growing interest in China. However, potential risks are associated with the use of sludge due to its contamination with toxic organics, heavy metals and pathogenic microorganisms. In this study, a screening assessment was conducted on sewage sludge samples collected from 17 different sewage treatment plants in Beijing, based on a batch of in vitro bioassays, including a set of recombinant gene yeast assays for endocrine disruption, and an ethoxy resorufin-O- deethylase （EROD） assay using H4IIE cells for aryl hydrocarbon receptor （Ah-R） agonistic activities. Our results suggested that moderate levels of estrogen receptor agonistic activities （0.9 ng E2. g-1 to 6.8 ng E2. gl, dw）, but relative higher androgen receptor antagonistic activ- ities （nd to 45%）, progestin receptor antagonistic activities （nd to 80%） and Ah-R agonistic activities （1390 to 6740 pg 2,3,7,8-tetrachlorodibenzo-p-dioxin （TCDD）·g-1, dw） were found in sewage sludge samples. However, there were no significant correlations between the toxic effects of sewage sludge and the sewage treatment processes. In addition, the 17β-estradiol （E2） equivalent quantity （EEQ） level of the sewage sludge was increased after the composting treatment, whereas the 2,3,7,8-tetrachlorodi- benzo-p-dioxin toxic equivalent quantity （TEQ） level of sewagesludge composted was much lower than that of sewage sludge.     

Speciation evolutions of target metals （Cd,Pb） influenced by chlorine and sulfur during sewage sludge incineration

In sludge incineration, the thermal behavior of heavy metal is a growing concern. In this work, the combined analysis of metal partitioning behavior between vapor phase and condensed phase, speciation redistribu- tion in condensed phase and the difference of metal species in binding energy was carried out to investigate the possible volatilization-condensation mechanism of heavy metals in high-temperature sludge incineration. It was found that there were two steps in metal volatilization. The initial volatilization of heavy metal originated from their exchangeable （EXC）, carbonate bound （CAR） and iron- manganese bound （FM） fractions, which is primarily composed of simple substance, chlorides, oxides and sulfides. With the increase of chlorine and sulfur in sludge, the inner speciation redistribution of heavy metals occurred in condensed phase, which was an important factor affecting the potential volatility of heavy metals. A partial of metal species with complexed （COM） and residual （RES） fractions gradually decomposed into simple substance or ions, oxides and carbonates, which signifi- cantly strengthened the second volatility. In presence of chlorine, about 46% of Cd with the RES fraction disappeared when the volatility rate of Cd increased by 44.89%. Moreover, about 9% of Pb with COM fraction disappeared when there was an increase of nearly 10% in the volatilization rate. Thus, the second volatilization was mainly controlled by the decomposition of metal species with COM and RES fractions. By virtue of XRD analysis and the binding energy calculation, it was found that metal complex and silicates were inclined to decompose under high temperature due to poor thermo stability as compared with sulfates.