Greenhouse gas mitigation in developing countries through technology transfer?: a survey of empirical evidence

While greenhouse gas (GHG) emissions are projected to rise primarily in the developing countries, the potential for developing new GHG mitigation technologies exists primarily in the industrialized countries. It is thus important, not only for predictions about future emission paths but also for climate change mitigation policies, to understand how the international diffusion of such technologies takes place and how it affects the energy infrastructure and GHG emissions in developing countries. This paper provides an overview of the channels through which these technologies diffuse and focuses on the empirical evidence pertaining to the effects these technologies have on GHG emissions in developing countries.

Biodegradable plastics: a solution or a challenge?

Though developed as a solution for the waste problem, biodegradable plastics create new challenges on waste management with respect to policies and laws, waste management technologies and application of market-based instruments. A holistic view and integrated approach are necessary to address the implication of each component of this picture on others and on the whole. In an effort to tackle the challenges, the paper makes an in-depth analysis of the waste management system with biodegradable plastics as an element, emphasizing on regulatory and economic aspects.     

Can long-path FTIR spectroscopy yield gas flux measurements through a variance technique?

Long-path Fourier transform infrared (FTIR) spectroscopy is capable of measuring concentrations of many environmentally important trace gases in the atmospheric surface layer over horizontal averaging paths of up to 1 km. If the FTIR could also measure the variance in gas concentration, we could conceivably use it to estimate the path-averaged, vertical flux of any gas that the FTIR can detect. The problem in measuring variances, however, is that the large sampling volume—which allows the FTIR to measure concentrations with the best resolution—degrades its response to the high-wavenumber turbulent fluctuations that contribute to the variance. In this paper, we use a model for the three-dimensional scalar spectrum to look at the effects of this volume averaging on the FTIR's ability to measure gas concentration variance. Our modeling suggests that there is no realistic configuration or sampling rate that will let the FTIR measure gas concentration variance in the surface layer. Its sampling volume must simply be so large that all turbulent fluctuations with wavenumbers from the dissipation region down to the vicinity of the spectral peak are irrevocably degraded. Our analysis identifies experiments that can test these predictions. Despite the FTIR's predicted inability to measure gas fluxes through the variance technique, we lastly show that it can still yield these fluxes through other micrometeorological techniques.     

A perfect storm? Indigenous rights within a national REDD+ readiness process in Peru

Recurring disagreements during national preparations to reduce emissions from deforestation and forest degradation (REDD+) are contributing to policy reform at multiple scales. The objectives of this study are to (i) develop a general framework to characterise diverse stakeholder perspectives on REDD+ programme objectives and governance arrangements, and (ii) apply this framework to analyse key stakeholders involved in REDD+ readiness process of Peru: the Inter-ethnic Association for the Development of the Peruvian Rainforest (Asociación Interétnica de Desarrollo de la Selva Peruana, AIDESEP), the Peruvian government and the World Bank. As indigenous peoples strive to maintain their own traditions and priorities, a turbulent readiness process is helping to resolve long-ignored issues of indigenous rights and to make REDD+ programme governance structures more inclusive. The Peruvian government/World Bank approach to REDD+ is incompatible with that of AIDESEP, therefore parallel implementation will be required for them to co-exist. Although a diversity of participants has helped to check and balance the centralization of decision-making power over REDD+ programme development, a history of failed assurances and agreements point to a need to maintain vigilance as new laws, regulations and safeguards are implemented.     

Clean artisanal gold mining: a utopian approach?

Artisanal and small-scale mining (ASM) provides an important source of livelihood for rural communities throughout the world. These activities are frequently accompanied by extensive environmental degradation and deplorable socio-economic conditions, both during operations and well after mining activities have ceased. As gold is easily sold and not influenced by the instability of local governments, it is the main mineral extracted by artisanal miners. Mercury (Hg) amalgamation is the preferred gold recovery method employed by artisanal gold miners and its misuse can result in serious health hazards for miners involved in gold extraction, as well as for surrounding community inhabitants, who may be exposed to mercury via the food chain. The rudimentary techniques characteristic of ASM result in a number of occupational hazards, other although most risks are primarily attributed to machinery accidents and ground failure, such as landslides and shaft collapses.Several technologies and methods commonly utilized by large-scale mining operations can be downsized to smaller scale operations. However, the likelihood that miners will adopt these large-scale methods, or those developed specifically for ASM, depends upon some key factors. For an artisanal miner, these factors include: (1) increased or comparable simplicity, (2) quick recovery of the economic mineral, and (3) demonstrated financial gain. Other practical aspects, such as the availability of materials (chemicals, steel rods, piping, generators, etc), capital and operating cost requirements and access to technical support, also influence acceptance of new techniques.This article will review four inter-related areas: first, the limitations and benefits, for ASM, of a number of specific technologies; second, the role of Processing Centers in education, information dissemination and provision of “clean” services; third, benefits and challenges associated with formalization of ASM activities; and fourth, the contribution of ASM to the development of sustainability of communities, primarily through diversification of livelihoods. The appropriate application of technologies, particularly given the diversity of ASM communities around the world, will also be explored.     

Mechanical micromachining: a sustainable micro-device manufacturing approach?

The use of mechanical micromachining to produce micro-devices is a flexible approach that can use any material that can be machined. The energy consumption for micromachining was compared between a conventional CNC and a micro-milling facility and showed that the energy usage for conventional CNC is highly inefficient. An energy footprint that is two to three magnitudes smaller is possible with a custom built micro-milling facility. The rapid increase in the manufacture of micro-devices, which will more than double in the next five years, will require careful planning if a sustainable future is to be envisaged for the use of mechanical micromachining for mass manufacture.     

A secondary copulatory structure in a female insect: a clasp for a nuptial meal?

Secondary copulatory structures are well-known in male dragonflies and spiders. Here I report a secondary copulatory organ in female ground weta, Hemiandrus pallitarsis (Ensifera, Orthoptera - crickets and allies). The organ, located on the underside of the abdomen, appears to secure the male's genitalia during the transfer of a spermatophylax nuptial meal to this location, an area quite separate from the female's primary copulatory structures, where the sperm ampulla is attached.     

Wasps robbing food from ants: a frequent behavior?

Food robbing, or cleptobiosis, has been well documented throughout the animal kingdom. For insects, intrafamilial food robbing is known among ants, but social wasps (Vespidae; Polistinae) taking food from ants has, to the best of our knowledge, never been reported. In this paper, we present two cases involving social wasps robbing food from ants associated with myrmecophytes. (1) Polybioides tabida F. (Ropalidiini) rob pieces of prey from Tetraponera aethiops Smith (Formicidae; Pseudomyrmecinae) specifically associated with Barteria fistulosa Mast. (Passifloraceae). (2) Charterginus spp. (Epiponini) rob food bodies from myrmecophytic Cecropia (Cecropiaceae) exploited by their Azteca mutualists (Formicidae; Dolichoderinae) or by opportunistic ants (that also attack cleptobiotic wasps). We note here that wasps gather food bodies (1) when ants are not yet active; (2) when ants are active, but avoiding any contact with them by flying off when attacked; and (3) through the coordinated efforts of two to five wasps, wherein one of them prevents the ants from leaving their nest, while the other wasps freely gather the food bodies. We suggest that these interactions are more common than previously thought.     

Angiogenesis factors in gliomas: a new key to tumour therapy?

Angiogenesis, the formation of new blood vessels, is required for the growth and expansion of tumours. Gliomas, the most common brain tumours, are particularly highly vascularized and, therefore, serve as a model to elucidate the process of tumour angiogenesis and to investigate new anti-angiogenic therapies. This review describes the role of angiogenic factors in glioma angiogenesis and new strategies to inhibit glioma growth by application of anti-angiogenic substances. We focus on vascular endothelial growth factor (VEGF), but also examine the role of angiopoietin and pleiotropic factors such as platelet-derived growth factor (PDGF), pleiotrophin and transforming growth factor- (TFG-). Strategies to inhibit glioma growth by reducing the action of angiogenic factors, by the application of anti-angiogenic substances such as angiostatin or endostatin, or inactivation of endothelial cells, are discussed. These new anti-angiogenic therapies appear to have a high potential not only for the treatment of gliomas, but also of other tumours.     

Environmental management in Brazil: is it a completely competitive priority?

Current studies indicate a need to integrate environmental management with manufacturing strategy, including topics like cross-functional integration, environmental impact, and waste reduction. Nevertheless, such studies are relatively rare, existing still a need for research in specific regional contexts. At the same time, the results found are not unanimous. Due to these gaps, the objective of this article is to analyze if environmental management can be considered a new competitive priority for manufacturing enterprises located in Brazil. A cross-sectional survey was conducted with Brazilian companies certified by ISO 14001. Sixty-five valid questionnaires were analyzed through Structural Equation Modelling (SEM). The first conclusion is that environmental management presents a preventive approach in the sample analyzed, focused on eco-efficiency, what potentially do not to create a competitive advantage. This preventive approach inhibits environmental management from being regarded as a new competitive manufacturing priority, in the full sense as defined by the literature. Another important result is that environmental management, although following a preventive focus, may influence positively the four manufacturing priorities: cost, quality, flexibility and delivery.     

Foresty offsets in emissions trading systems: a link between systems?

An important aspect in the linking of different emissions trading schemes is the degree to which these systems allow (or ban) external offset project categories. The EU Emission Trading Scheme (EU ETS) currently allows the use of credits from energy and industry projects developed under the Kyoto Protocol’s Joint Implementation (JI) and Clean Development Mechanism (CDM) but excludes the use of carbon credits from forestry projects for compliance in the EU ETS. Forestry credits generated by the CDM have a limited lifetime and expire at the end of a project’s crediting period, or earlier if the carbon stock for which the credits have been issued ceases to exist. According to the recently adopted amendment of the EU ETS Directive forestry credits will remain to be excluded until 2020. The present article reviews how the New South Wales Greenhouse Gas Abatement Scheme (Australia), the Regional Greenhouse Gas Initiative (US) and the voluntary scheme of the Chicago Climate Exchange integrate forestry offsets into the respective system and how they deal with the risk of losing stored and credited biomass. By comparing the results of different scenarios this article shows how differences in the treatment of forestry offsets could impact the efforts to link various emission trading systems in future.

Showering in Flint, MI: Is there a DBP problem?

Lead contamination in the City of Flint, MI has been well documented over the past two years, with lead levels above the EPA Action Level until summer 2016. This resulted from an ill-fated decision to switch from Detroit water (Lake Huron) with corrosion control, to Flint River water without corrosion control. Although lead levels are now closer to normal, reports of skin rashes have sparked questions surrounding tap water in some Flint homes. This study investigated the presence of contaminants, including disinfection by-products (DBPs), in the hot tap water used for showering in the homes of residents in Flint. Extensive quantitative analysis of 61 regulated and priority unregulated DBPs was conducted in Flint hot and cold tap water, along with the analysis of 50 volatile organic compounds and a nontarget comprehensive, broadscreen analysis, to identify a possible source for the reported skin rashes. For comparison, chlorinated hot and cold waters from three other cities were also sampled, including Detroit, which also uses Lake Huron as its source water. Results showed that hot water samples generally contained elevated levels of regulated and priority unregulated DBPs compared to cold water samples, but trihalomethanes were still within regulatory limits. Overall, hot shower water from Flint was similar to waters sampled from the three other cities and did not have unusually high levels of DBPs or other organic chemicals that could be responsible for the skin rashes observed by residents. It is possible that an inorganic chemical or microbial contaminant may be responsible.     

Digital PCR: a powerful new tool for noninvasive prenatal diagnosis?

Recent reports have indicated that digital PCR may be useful for the noninvasive detection of fetal aneuploidies by the analysis of cell-free DNA and RNA in maternal plasma or serum. In this review we provide an insight into the underlying technology and its previous application in the determination of the allelic frequencies of oncogenic alterations in cancer specimens. We also provide an indication of how this new technology may prove useful for the detection of fetal aneuploidies and single gene Mendelian disorders. Copyright © 2008 John Wiley & Sons, Ltd.     

CrⅥ adsorption on four typical soil colloids: equilibrium and kinetics

ＩｎｔｒｏｄｕｃｔｉｏｎＣｈｒｏｍｉｕｍ ,ｗｈｉｃｈｉｓｔｏｘｉｃｔｏｍａｎａｎｄｏｔｈｅｒｌｉｖｉｎｇｏｒｇａｎｉｓｍｓ,ｐｒｅｓｅｎｔｓｐｏｔｅｎｔｉａｌｌｙｓｅｒｉｏｕｓｅｎｖｉｒｏｎｍｅｎｔａｌｐｒｏｂｌｅｍｓｔｈｒｏｕｇｈｏｕｔｔｈｅｗｏｒｌｄ .ＣｈｒｏｍｉｕｍｍａｉｎｌｙｅｘｉｓｔｓｉｎｔｗｏｆｏｒｍｓａｓＣｒⅢ ａｎｄＣｒⅥ .ＣｒⅢｉｓｏｆｌｅｓｓｐｏｉｓｏｎｏｕｓｎｅｓｓ,ｂｕｔＣｒⅥ ｅｘｈｉｂｉｔｓａｓｔｒｏｎｇｔｏｘｉｃｉｔｙ .ＷｈｅｎＣｒⅥｉｓｄｉｓｃｈａｒｇｅｄｉｎｔｏｗａ…     

Signaling hunger through aggression—the regulation of foraging in a primitively eusocial wasp

Primitively eusocial wasps are generally headed by behaviorally dominant queens who use their aggression to suppress worker reproduction. In contrast, queens in the primitively eusocial wasp Ropalidia marginata are strikingly docile and non-aggressive. However, workers exhibit dominance-subordinate interactions among themselves. These interactions do not appear to reflect reproductive competition because there is no correlation between the relative position of an individual in the dominance hierarchy of the colony and the likelihood that she will succeed a lost/removed queen. Based on the observation that foraging continues unaltered in the absence of the queen and the correlation between dominance behavior and foraging, we have previously suggested that dominance-subordinate interactions among workers in R. marginata have been co-opted to serve the function of decentralized, self-organized regulation of foraging. This idea has been supported by an earlier experimental study where it was found that a reduced demand for food led to a significant decrease in dominance behavior. In this study, we perform the converse experiment, demonstrate that dominance behavior increases under conditions of starvation, and thus provide further evidence in support of the hypothesis that intranidal workers signal hunger through aggression.     

Engineered nanoparticles: safer substitutes for toxic materials, or a new hazard?

Nanotechnology has the potential for the development of new materials and processes that can substitute for toxic materials now used in industry. Excitement over this possibility is tempered, however, by the potential adverse environmental health and safety aspects of the new nanomaterials. Although a few examples from the literature are encouraging, e.g., wire and cable insulation, great care must be taken to perform complete alternatives assessment evaluations of any new nanotechnology-enabled product before its adoption.     

Quantification and control of microbial pollution from agriculture: a new policy challenge?

Faecal indicator organisms (FIOs) are commonly used to quantify pollution of public health significance. Health protection, as indexed by FIO control, is a central aim of new ‘catchment-scale’ water quality management required in the USA by the Clean Water Act and in the European Union (EU) by the Water Framework Directive (WFD). Experience of the former, after a decade of implementation, suggests that the most significant reason for water quality ‘impairment’ is elevated FIO concentrations, mainly in recreational and shellfish harvesting waters. This provides an early warning of possible problems which the EU regulatory authorities are likely to face. To date, however, a surprising lack of EU attention has been given to prediction and control of catchment fluxes of this key parameter. This is likely to prove embarrassing if the experience of the US regulatory community is not acted upon with some urgency. There is a growing, though still partial, body of empirical science to form the ‘evidence-base’ for good regulatory practice. However, adoption of ‘best management practices’ (BMPs) to effect remediation of impacted waters will require close integration of water policy with policies on financial support for the farming community. This is likely to require enhanced communication and integration within the discrete policy communities addressing the agricultural sector through the Common Agricultural Policy and water regulation through the Water Framework Directive.