Mycelial culture of wild Inonotus hispidus parasitizing the jujube tree and the cultivation conditions of its fruit body on rice medium北大核心CSCD

Inonotus hispidus is a kind of rare medicinal fungus, and its natural resources are very scarce. Currently, the artificial cultivation technology of I. hispidus is not completely developed, and this reflects on its extremely low biological conversion rate and long cultivation period. In order to improve the bioconversion rate and shorten the production cycle of I. hispidus, we first analyzed the mycelia culture conditions of the collected I. hispidus, and then we further explore the method of domesticated cultivation of its fruiting body in rice medium. During the process of mycelial culture, the suitable temperature, pH, carbon source, and nitrogen source for mycelial growth were selected using the mycelial growth rate as index. During the domesticated cultivation of the fruiting body, the suitable culture medium for its growth was selected using the bioconversion rate as index. Screening results of mycelial culture conditions showed that the optimal culture conditions for the growth of mycelium of the wild I. hispidus were: temperature of 25 °C, initial pH of 6.0, glucose as the carbon source, and yeast extract powder as the source of nitrogen. The results of the domesticated cultivation showed that the biotransformation rate of I. hispidus was higher when using rice as the main medium substrate. The optimal cultivation conditions were: a 0.2% yeast extract content in the nutrient solution, a 1:1.6 ratio of rice to nutrient solution, and a 4 mL inoculum of the liquid strain. Under these conditions, it took about 4 days for the mycelium to grow over the cultivation medium. The time required for the differentiation of the primordium to form fruit bodies was about 20 days, and the bioconversion rate reached 28.70% ± 5.05%. The results of this study indicate the feasibility of using rice as the main substrate for the cultivation of I. hispidus, and it also provide new insights for the finding of new cultivation substrates for other rare medicinal fungi. © 2018 Science Press. All rights reserved.     

Screening and degradation characteristics of a tetracycline-degrading bacterial strain北大核心CSCD

Tetracycline is widely used in livestock and poultry breeding industry, which can cause serious problems to the environment. Antibiotic pollution has become an important environmental issue. This study aimed to isolate and identify a well-functioning tetracycline-degrading bacteria strain from activated sludge and to investigate its optimum degradation conditions. The strain was identified through morphological features, Gram staining, and the sequence analysis of 16S rRNA. Furthermore, the temperature, initial pH of the medium, inoculation amount, and type of metallic salt were analyzed to investigate the tetracycline degradation performance of the isolated strain. Based on the single factor test, the method of response surface analysis was adopted to optimize the degradation condition. The strain was named TTC-1 and identified as Klebsiella pneumoniae. The optimum condition for tetracycline degradation was determined as follows: temperature of 34.4 °C, pH of 7.22, and MnSO4 concentration of 0.32 g/L. Under this optimum condition, the predicted tetracycline degradation rate was 93.77%, whereas the observed value was 94.26%. The experimental results showed that the proposed model had high accuracy. TTC-1 showed a good performance in degrading tetracycline, which can provide reference for the bacteria during the biological treatment of tetracycline containing wastewater. © 2018 Science Press. All rights reserved.     

Enhancement of MK-7 synthesis by engineered strains of Bacillus subtilis natto that overexpress men genes and by increasing available dissolved oxygen北大核心CSCD

In recent years, researchers have discovered novel physiological functions of vitamin K2. In addition to promoting blood clotting, it can prevent osteoporosis and cardiovascular disease and is expected to treat some tumors and Parkinson’s disease. Bacillus subtilis natto is a probiotic that has been approved by the U.S. Food and Drug Administration for use as a bioproducer of vitamin K2. Its product’s main form is MK-7, which has a long half-life in the human body and high bioavailability. Bacillus subtilis natto displays great potential for large-scale biological preparation of vitamin K2. In this study, the Sipizizen method of Bacillus subtilis transformation was optimized to make it suitable for molecular transformation of Bacillus subtilis natto. Vectors for overexpression of all 8 genes involved in the menadione synthetic pathway were constructed, and changes in MK-7 fermentation yield after transformation of Bacillus subtilis natto were investigated. Three enzymes were found to exert significant effects on MK-7 synthesis, namely isopentenyltransferase (MenA), 1,4-dihydroxy-2-naphthoyl-CoA synthase (MenB), and nornaphthoquinone methyltransferase (MenG). A modified strain (BN-pABG) with higher MK-7 productivity was obtained by concerted overexpression of menA, menB, and menG. In a 5 L bioreactor, MK-7 synthesis was further enhanced by optimizing oxygen supply. The final yield of MK-7 from the modified strain was 62.21 mg/L, 1.26 times higher than that of the original strain. These results show that combined overexpression of menA, menB, and menG strongly promotes MK-7 synthesis by Bacillus subtilis natto, and optimizing the oxygen supply conditions also promotes more robust MK-7 synthesis. © 2022 Authors. All rights reserved.     

Isolation,identification, culture conditions,and laccase production of white rot fungus北大核心CSCD

The white rot fungi are members of Basidiomycota, which can degrade lignin and form white rot. They are high producers of extracellular laccases. In the present study, pure culture strain of high-temperature and high-laccase production types (numbered as BUA-01) was isolated from the fruiting bodies of a white rot fungus collected in the campus of Beijing University of Agriculture. The taxonomic characteristic was determined based on morphological and ITS sequence analysis. Furthermore, the optimal culture conditions for the mycelia were determined, including carbon source, nitrogen source, C/N ratio, growth factors, temperature, and pH. Extracellular laccase production was investigated in liquid fermentation with different concentrations of Cu (CuSO4) as inducer. Decolorizing activity of the fermentation broth was assayed using three azo dyes: Evans blue, methyl orange, and eriochrome black T. The results showed that the strain possessed the highest homology toward Trametes hirsuta, with the homology ratio of 100% and the genetic distance of 0, suggesting that the strain BUA-01 belonged to the genus Trametes. The culture condition investigated revealed that the optimal condition for mycelia growth included the following: carbon source, starch; nitrogen source, soybean powder and yeast extract; C/N ratio, 40/1 and 10/1; temperature, 37 °C; and pH, 6.0-7.0. The assayed growth factors had no significant effect on mycelial growth. It demonstrated high laccase activity in liquid fermentation. The highest extracellular laccase activity of 1 081.33 ± 6.3 U/mL was observed in the broth with a Cu adjunction concentration of 0.25 mmol/L after a 96-h culture period. It was about 26-fold higher than that of the control group. The isolated strain exhibited significant decolorizing activity toward the azo dyes Evans blue, methyl orange, and eriochrome black T, with the decolorization rate at 12 h of 93.31% ± 0.16%, 92.37% ± 0.42%, 79.25% ± 0.64%, respectively. This suggests that the strain possesses potential applications in laccase production and dye degradation. © 2018 Science Press. All rights reserved.     

Biosorption of Cr（VI） by carbonized Eupatorium adenophorum and Buckwheat straw： thermodynamics and mechanism

High quality and low cost carbon can be prepared from Eupatorium adenophorum （E. adenophorum） and Buckwheat straw. The biosorbent was used for Cr（VI） removal. The effect of experimental parameters, such as pH, sorbent dosage and temperature were examined and the optimal experimental condition was determned. Solution pH is found influencing the adsorp- tion. Cr（VI） removal efficiency is found to be maximum （98%） at pH= 1. Langmuir and Freundlich adsorption isotherms were applicable to the adsorption process and their constants were evaluated. The adsorption data obtained agreed well with the Langmuir sorption isotherm model. The maximum adsorption capacities for Cr（VI） ranged from 46.23 to 55.19mg.g^-1 for temperature between 298 K and 308 K under the condition of pH = 1.0. Thermodynamic parameters such as free energy change （AG）, enthalpy （AH） and entropy （AS） indicate a spontaneous, endothermic and increased randomness nature of Cr（VI） adsorption. Studies found that the raw E. adenophorum and buckwheat straw mixed materials with simple treatment had a high efficiency for the removal of Cr（VI） and would be a promising adsorbent.     

Effect of seawater salinity on the synthesis of zeolite from coal fly ash

A novel method for the synthesis of zeolite was developed in this paper. The synthesis was carried out by hydrothermal activation after alkali fusion and coal fly ash （CFA） was used as raw material with seawater of different salinities. Seawater salinity was varied from 32 to 88 for zeolite crystallization during the hydrothermal process. The results show that seawater salinity plays an important role in zeolite synthesis with CFA during hydrothermal treatment. The products were a mixture of NaX zeolite and hydroxysodalite; seawater salinity more strongly affected the crystallization than the type and chemical composition of the zeolites. The yield of CFA transformed into zeolite gradually rose with the increase in salinity, reaching a transformation rate of 48%--62% as the salinity increased from 32 to 88, respectively. The proposed method allows for the efficient disposal of by-products; therefore, the application of seawater in zeolite synthesis presents promising economic and ecological benefits.     

Removal of non-point pollutants from bridge runoff by a hydrocyclone using natural water head

A hydrocyclone using natural water head provided by bridge was operated for the treatment of stormwater runoff. The hydrocyclone was automatically controlled using electronic valve which is connected to a pressure meter. Normally the hydrocyclone was open during dry days, but it was closed after the capture of the first flush. The results indicated that the average pressure and the flow rate were directly affected by the rainfall intensity. The pressure head was more than 2 m when the rainfall intensity was above 5mm·h^-1. The percentage volume of underflow with high solids concentration decreased as the pressure and flow rate increased, but the percentage volume of overflow with almost no solids showed the opposite behavior. The total suspended solids （TSS） concentration ratio between the overflow and inflow （TSSover/TSSin） decreased as a function of the operational pressure, while the corresponding ratio of underflow to inflow （TSSunaer/TSSi,） increased. The TSS separation efficiency was evaluated based on a mass balance. It ranged from 25% to 99% with the pressure head ranging from 1.4 to 9.7 m, and it was proportional to pressure and flow rate. Normally, the efficiency was more than 50% when the pressure was higher than 2 m. The analysis of the water budget indicated that around 13% of the total runoff was captured by the hydrocyclone as a first flush, and this runoff was separated as underflow and overflow with the respective percentage volumes of 29% and 71%. The pollutants budget was also examined based on a mass balance. The results showed that the percentage of TSS, chemical oxygen demand （COD）, total nitrogen （TN）, and total phosphorus （TP） in underflow were 73%, 59%, 7.6%, and 49%, respectively. Thus, it can be concluded that the hydrocyclone worked well. It separated the first flush as solids-concentrated underflow and solids-absent overflow, and effectively reduced the runoff volume needing further treatment. Finally, four types of optional post treatment design are presented and compared.     

Removal of 17β-estradiol in laccase catalyzed treatment processes

The removal of 17β-estradiol （E2） in laccase catalyzed oxidative coupling processes was systematically studied in this work. We focused on the influence of pH and natural organic matter （NOM） on the performance of the enzymatic treatment processes. It was found that the optimal pH for E2 removal was between 4 and 6. The removal of E2 was slightly inhibited in the presence of NOM. Enzymatic transformation of E2 was second-order in kinetics with first-order to both the concentrations of the enzyme and contaminant. Mass spectrum （MS） analysis suggested that coupling products were formed through radical-radical coupling mechanism. The results of this study demonstrated that laccase catalyzed oxidative coupling process could potentially serve as a treatment strategy to control steroid estrogens.     

Isolation,identification, and biological characteristics of a wild Chaga mushroom北大核心CSCD

In this study, a pure culture strain (numbered as F1501) was obtained using tissue separation and purification methods from the sclerotia of Chaga mushroom from Russia. Further researches included studies on classification, optimum growth conditions of mycelia, extracellular polysaccharides from fermentation broth and their antioxidant activity, and artificial acclimation. According to the identification of the internal transcribed spacer (ITS) region, it was confirmed that F1501 was a species of the genus Inonotus and family Hymenochaetaceae, which had 99% similarity with Inonotus obliquus. F1501 was further classified as I. obliquus based on the morphological characteristics of its mycelia and sclerotia. The optimal carbon source, nitrogen source, C/N ratio, growth factor, temperature, and pH value for the growth of the F1501 strain mycelia were maltose, beef extracts, 10/1, B2, 28 °C, and 8.0, respectively. Liquid fermentation of F1501 was performed using PD media and a 10% inoculation amount at 28 °C and 150 r/min for 7 d. The content of polysaccharides in the fermentation broth was 476.32 mg/L, with a total antioxidant activity of 0.19 mmol/L (Trolox) and hydroxyl free radical-scavenging activity of 72.7%. Artificial acclimation study revealed that the fruiting body-like structure was obtained using cottonseed hulls as the main substrate. In the present study, a new strain of I. obliquus and its biological characteristics were explored, which could provide a theoretical basis for the artificial acclimation and development of wild mushrooms. © 2018 Science Press. All rights reserved.     

The oligopeptides production by the feather-degrading bacterium Bacillus methylotrophicus H0北大核心CSCD

Due to the high nutritive value of oligopeptides and the waste of feather resources, this study aimed at screening efficient strains of bacteria able to rapidly degrade feathers and produce large quantities of value-added oligopeptides. In order to assess the potential yield of oligopeptides, the promising strain H0 was selected from 16 feather-degrading microorganisms. To identify the strain, we analyzed the morphological and physiological characteristics of different strains, and carried out a gene sequence analysis of their 16S rRNAs. A single factor experiment was used to promote feather degradation and oligopeptide production, and the characteristics of the oligopeptides produced were also analyzed by Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS). The strain was identified as Bacillus methylotrophicus. The optimal initial pH and temperature for oligopeptide production were 11 and 40 °C, respectively. After 72 h of fermentation under these optimal conditions, the feathers were almost completely degraded, with a 38.19% of oligopeptides (accounting for 67.53% of the total soluble peptides) and a 11.11% of free amino acids produced. LC-MS/MS analysis indicated that the oligopeptides were mainly short peptides containing 5-10 amino acids, with a molecular mass (Mr) of less than 1 300. Moreover, the peptides were abundant in branched-chain amino acids, that might be responsible for the antioxidant property of the feather hydrolysate. Our results demonstrate the great capability of B. methylotrophicus H0 in feather degradation and oligopeptide production. This research provides a high-quality microorganism resource, and the scientific basis for the development of feather-derived oligopeptide products. © 2018 Science Press. All rights reserved.     

Characterization and catabolic genes detection of three oil-degrading Rhodococcus spp.北大核心CSCD

Oil pollution is one of the major factors causing environmental deterioration. Bioremediation of oil contaminated environments by microorganisms attracts much research attention. This study aimed to screen efficient oil-degrading bacteria from oil contaminated soil and analyze their characteristics and catabolic genes. Oil-degrading bacteria were screened from oil contaminated soil in minimal medium containing crude oil and identified by morphological, physiological and biochemical characteristics and 16S rDNA sequence analysis. Their growth and degradation characteristics were studied with ultraviolet spectroscopy and GC-MS analysis. The surfactant production was studied by adopting culture method. The major oil-degrading related genes were detected by t he PCR a mplification. As a result, t hree oil-degrading bacteria strains named KB1, 2182 and JC3-47 were isolated from the oil contaminated soil samples. The strains could use crude oil as the sole carbon source to degrade oil with a degrading rate of 41.02%, 32.26% and 55.90%, respectively, when cultured in minimal medium containing crude oil for 3 days. The bacteria were identified to belong to genus Rhodococcus. With 100% similarity of 16S rDNA sequences of the three strains with known ones of Rhodococcus, KB1 was preliminarily identified as Rhodococcus erythropolis, 2182 as Rhodococcus equi, and JC3-47 as Rhodococcus qingshengii. They grew well at 10-50 °C, with the initial pH of 3-9 and the NaCl concentration of 0-5%. The optimal temperature for bacterial growth was 35 °C, 35 °C and 30 °C respectively. KB1 and 2182 could grow at pH 2 and 9.0% of NaCl. The bacteria grew well in broth containing different organic substrates as sole carbon source, such as n-dodecane, n-octadecane, benzene, methylbenzene, xylene and naphthaline. KB1 and JC3-47 could grow well in broth containing pyrene. GC-MS analysis revealed that the bacteria could effectively degrade medium- and long-chain alkane components in crude oil. The bacteria produced biosurfactants and decreased the surface tension of the culture broth. They also showed adhesion activities to n-hexadecane. The oil-degrading related genes such as alkane monooxygenase, aromatic-ring-hydroxylating dioxygenase and catechol dioxygenase genes were detected in all the three strains. Besides, biphenyl dioxygenase genes were detected in KB1 and 2182. The isolated Rhodococcus spp. strains could effectively degrade petroleum hydrocarbons with high adaptabilities to extreme environments such as high salt and low temperature. They are supposed to be applied broadly in the bioremediation of oil contaminated soil in such environments.     

Isolation,identification, culture conditions,and laccase production of a wild mushroom 'Huaier'北大核心CSCD

In the present study, fruiting bodies of a wild medicinal mushroom, 'Huaier, ' were collected from Populus canadensis in the Beijing Xiangshan Park. The pure culture strain was obtained from fruiting bodies using the tissue isolation method. It was stored and numbered as XS-01. It was systematically classified using morphological and ITS identification. Further studies were focused on mycelia optimum culture conditions and laccase production by liquid fermentation. A 598-bp partial ITS region sequence (GenBank accession number KY93348) was obtained using PCR method. Phylogenetic tree and genetic distance analysis were performed using the MEGA 6.0 software. The present strain possessed the highest homology (100%) with Perenniporia robiniophila, and the genetic distances were 0.000. Based on the ITS sequencing and morphological characteristics of fruiting bodies and mycelia, XS-01 was identified as P. robiniophila. Based on mycelial growth rate and quality, mycelia optimum culture conditions were revealed to be as follows: the optimum carbon sources were starch and maltose, the optimum nitrogen source was yeast extracts, the optimum C/N ratio range was 30/1 - 60/1, the best growth temperature was 32 °C, the optimum pH was 7, and the optimum growth factor was VB1. Further study of Cu2+ on extracellular laccase production revealed that 1.0 mmol/L Cu2+ could significantly enhance the enzyme production, with the highest activity of 417.5 U/mL when cultured for 96 h and an increase ratio of 93.4% to the control. On the other hand, 2.0 mmol/L Cu2+ can markedly decrease the enzyme production laccase activity at 96 h to 79.0 U/mL, which was 36.6% of that of the control. In conclusion, a pure strain of T. robiniophila with high extracellular laccase activity was obtained, suggesting its potential application for artificial cultivation and laccase production. © 2018 Science Press. All rights reserved.     

Identification and ranking of the risky organic contaminants in the source water of the Danjiangkou reservoir

The Danjiangkou reservoir was selected to provide the source water for the middle routes of the South to North Water Transfer Project, which has provoked many environmental concerns. To date, investigations of water contamination of the source water of the Danjiangkou reservoir with organic micro-pollutants have been limited. This study was conducted to identify and rank organic contaminants that pose risks in the Danjiangkou reservoir. To this end, the Chemical Hazard Evaluation and Manage- ment Strategies （CHEMS-1） approach was adapted to integrate the deconvolution technology of qualitative identifying contaminants for site-specific environmental matrices. The samples were screened for the presence of 1093 contaminants using deconvolution technologies and the hazard values of the identified contaminants were calculated using the adapted CHEMS-1 approach accord- ing to their hazardous properties and occurrence in source water. The results showed that 46 contaminants from 1093 targets were present in Danjiangkou water, 23 of which appeared at frequencies higher than 50%, and 15 of which were identified as priorities. Over half （53%） of the high- ranked contaminants were polycyclic aromatic hydrocar- bons （PAHs）, with chrysene ranked highest on the list. Health risk assessment of the top-ranked PAHs was conducted and revealed that cancer risks of PAHs detected in the source water of Danjiangkou to different populations ranged from 10-7 to 104, indicating a low cancer risk to consumers. The results of this study indicated that the adapted CHEMS-1 approach was feasible for site-specific screening of organic contaminants to identify and rank potential priority pollutants.     

A new efficient azo dye-decolorizing bacterium Paenibacillus dendritiformis GGJ7 and its decolorization process北大核心CSCD

This paper aimed to find an efficient bacterium for decolorizing azo dyes. A strain which could decolorize Congo Red efficiently was isolated from Congo Red. The strain was identified as Paenibacillus dendritiformis GGJ7 (GGJ7, in short) by 16S rRNA gene sequence (NCBI accession No. KY655213). Strain GGJ7 was applied to the decolorization of azo dyes in this research, and influencing factors of decolorization were investigated, including diverse nutritional conditions, culture conditions (pH, temperature, oxygen conditions), and various dyes. The results demonstrated that the decolorization rate of Congo Red by strain GGJ7 was much higher than that of the other eight strains (e.g., YRJ1, YRJ2 etc.) in our previous work. The optimal conditions for Congo Red decolorization were 25 g/L LB broth as nutrient source, 30 °C, pH 7, and an anaerobic environment. The mechanism of decolorization was mainly biodegradation, and the decolorization process of strain GGJ7 was conformed to the first-class kinetics model: -ln (At /A0) = 0.6058t - 0.1082. For different azo dyes, the decolorization rate was up to 95%. Strain GGJ7 only needed 1 h to decolorize 50 mg/L Methyl Orange, 25 mg/L Croceine Scarlet, and 25 mg/L Methyl Red, needed 3 h to decolorize 50 mg/L Orange G and 50 mg/L Orange G6, and needed 4 h to decolorize 50 mg/L Congo Red. In summary, strain GGJ7 is an efficient azo dye-decolorizing bacterium, and it has a potential application in treating printing and dyeing wastewater. © 2018 Science Press. All rights reserved.     

Effects of shear force on formation and properties of anoxic granular sludge in SBR

This paper reports the effects of shear force on anoxic granular sludge in sequencing batch reactors （SBR）. The study was carried out in two SBRs （SBR1 and SBR2） in which sodium acetate （200mg COD·L^-1） was used as the sole substrate and sodium nitrate （40 mgNO3-N·L^-1） was employed as the electron acceptor. The preliminary objective of this study was to cultivate anoxic granules in the SBR in order to investigate the effects of shear force on the formation of anoxic granular sludge and to compare the properties of anoxic sludge in the SBR. This study reports new results for the values of average velocity gradient, a measure of the applied shear force, which was varied in the two SBRs （3.79 s^-1 and 9.76 s^-1 for SBR1 and SBR2 respectively）. The important findings of this research highlight the dual effects of shear force on anoxic granules. A low shear force can produce large anoxic granules with high activity and poor settling ability, whereas higher shear forces produce smaller granules with better settling ability and lower activity. The results of this study show that the anoxic granulation is closely related to the strength of the shear force. For high shear force, this research demonstrated that： 1） granules with smaller diameters, high density and good settling ability were formed in the reactor, and 2） granular sludge formed faster than it did in the low shear force reactor （41days versus 76 days）. Once a steady-state has been achieved, the nitrate and COD removal rates were found to be 98% and 80%, respectively. For low shear force, such as was applied in SBR1, this research demonstrated that： 1） the activity of anoxic granular sludge in low shear force was higher than that in high shear force, 2） higher amount of soluble microbial products （SMPs） were produced, and 3） large pores were observed inside the larger granules,which are beneficial for nitrogen gas diffusion. Electron microscopic examination of the anoxic granules in both reactors showed that the morphology of the granules was ellipsoidal with a clear outline. Coccus and rod-shaped bacteria were wrapped by filamentous bacteria on the surface of granule.     

Optimization of methyl orange removal from aqueous solution by response surface methodology using spent tea leaves as adsorbent

The effective disposal of redundant tea waste is crucial to environmental protection and comprehensive utilization of trash resources. In this work, the removal of methyl orange （MO） from aqueous solution using spent tea leaves as the sorbent was investigated in a batch experiment. First, the effects of various parameters such as temperature, adsorption time, dose of spent tea leaves, and initial concentration of MO were investigated. Then, the response surface methodology （RSM）, based on Box- Behnken design, was employed to obtain the optimum adsorption conditions. The optimal conditions could be obtained at an initial concentration of MO of 9.75 mg·L-1, temperature of 35.3℃, contact time of 63.8 min, and an adsorbent dosage 3.90 g· L-1. Under the optimized condi- tions, the maximal removal of MO was 58.2%. The results indicate that spent tea leaves could be used as an effective and economical adsorbent in the removal of MO from aqueous solution.     

一种分离培养硫酸盐还原菌的改进方法

On the base of the characteristics of sulfate-reducing bacteria (SRB) growth and dish cultivated method, a new method for isolation and cultivation of SRB is established. It is dilution spread and repeat dish sandwish cultivated method with the exellence of dilution spread and embeded growth, and it can help separation and identification of SRB. The method has simple operation and less equipment. And using this method, the natural SRB drop was successfully gained, and small agar pieces containing SRB drop were acquired in easiness. The brief SRB transfering operation in strict anaerobic condition was in-deed realized. Fig 1, Ref 7.     

Membrane Fouling in Microfiltration of Sanitary Landfill Leachate for Removals of Colourand Solids

In this research,the treatability of solids from sanitary landfill leachate by microfiltration membrane was investigated and the fouling of the membrane was carefully studied.Continuous microfiltration process was carried out for 21 h in experimental system involved coagulation with Moringa oleifera followed by filtration using submerged hollow fibre microfiltration membrane (MFM).Coagulation with M.Oleifera,air diffusers and back flush technique were used for preventing or alleviating fouling of the membrane.The hollow fibre MFM showed high removals of 98%,91% and 99% for turbidity,colour and total suspended solids respectively.It was obtained at the beginning of the filtration.However,quality of the filtrate rapidly declined during the filtration process.Fouling was found to proceed according to the classical cake filtration model.Coagulation with M.Oleifera as well as the back-flush technique could not fully restore the deterioration occurred to the membrane.     

Removal of clofibric acid from aqueous solution by polyethylenimine-modified chitosan beads

Polyethylenimine （PEI）-modified chitosan was prepared and used to remove clofibric acid （CA） from aqueous solution. PEI was chemically grafted on the porous chitosan through a crosslinking reaction, and the effects of PEI concentration and reaction time in the preparation on the adsorption of clofibric acid were optimized. Scanning electron microscopy （SEM） showed that PEI macromolecules were uniformly grafted on the porous chitosan, and the analysis of pore size distribution indicated that more mesopores were formed due to the crosslinking of PEI molecules in the macropores of chitosan. The PEI-modified chitosan had fast adsorption for CA within the initial 5 h, while this adsorbent exhibited an adsorption capacity of 349 mg· g^-1 for CA at pH 5.0 according to the Langmuir fitting, higher than 213 mg· g^-1 on the porous chitosan. The CA adsorption on the PEI- modified chitosan was pH-dependent, and the maximum adsorption was achieved at pH 4.0. Based on the surface charge analysis and comparison of different pharmaceu- ticals adsorption, electrostatic interaction dominated the sorption of CA on the PEI-modified chitosan. The PEI- modified chitosan has a potential application for the removal of some anionic rnicropollutants from water or wastewater.     

Adsorption of benzene and toluene from waste gas using activated carbon activated by ZnCl2

A series of activated carbons with high surface area were prepared from walnut shell using chemical activation with ZnCl2. In this research the carbonization stage was carried out at 500℃. The performance of the synthesized carbons evaluated in adsorption of benzene and toluene from waste gas. The influence of impregnation ratio on the characteristics of synthesized activated carbons as well as their adsorption capacity was investigated. The ratio of activation agent to walnut shell was selected in the range of 0.5-2.0 wt/wt. The synthesized activated carbons were characterized using XRD, SEM, BET and FTIR techniques. The highest activated carbon production yield was obtained at impregnation ratio of 1.5 wt/wt. The XRD analysis illustrated that peaks intensity decreased with increasing impregnation ratio showing that amorphous property of samples was increased. The SEM analysis revealed successful pore development in synthesized activated carbons obtained at high impregnation ratios. The surface area of the activated carbons increased with increasing impregnation ratio and its maximum value reached 2643 m2.g 1 at impregnation ratio of 2/1. FTIR analysis indicated that the relative amount of different acidic surface groups on synthesized carbons was a function of impregnation ratio. Experimental results for benzene and toluene adsorption showed a high potential of employing synthesized impregnated activated carbon for treatment of waste gas. Generally, the amount of VOC adsorbed on the surface was affected by physicochemical properties of synthesized activated carbons.