Is bark pH more important than tree species in determining the composition of nitrophytic or acidophytic lichen floras?

To study the pH preference of epiphytic lichens, the bark pH of Fraxinus, Tilia, Quercus and Ulmus trees in an urban environment was measured using a flat surface electrode. The total number of trees was 253. A survey was made of the lichens in a 40 × 40 cm quadrat surrounding the pH measurement point. Our data analysis using multivariate and univariate statistical techniques indicates that the tree species is the most important factor influencing lichen colonisation, and that bark pH alone is of less importance. We hypothesize that the changed pollution climate, with strong decreases in both sulphur dioxide and ammonia concentrations over the past two decades and a concomitant general increase in bark pH, has made epiphytes less sensitive to pH.     

Does the Harvard/U.S. Environmental Protection Agency Ambient Particle Concentrator Change the Toxic Potential of Particles?

Abstract

Inhalation exposure to urban air particles is known to increase morbidity in humans and animals. Our group utilizes the Harvard/U.S. Environmental Protection Agency Ambient Particle Concentrator (HAPC) to generate concentrated aerosols of outdoor air particles for experimental exposures. We have reported increased pathologic responses to inhalation of concentrated urban air particles and identified silicon (as silicate) as an element associated with many of these responses. Using silicate-rich Mt. St. Helen’s volcanic ash (MSHA), we exposed three groups of Sprague-Dawley rats by inhalation for 6 hr to filtered air, MSHA, or MSHA passed though the HAPC. Twenty-four hours following exposure, bronchoalveolar lavage was performed to assess total cell count, differential cell count, protein, lactate dehydrogenase, and n-β[notdef]glucosaminidase levels. Peripheral blood was examined for packed cell volume, total protein, total white cells, and differential cell count. Morphologic studies localized particles in the lung and assessed pulmonary vasculature. No significant differences were observed among any of the groups in any parameter measured including morpho-metric analysis of pulmonary vasoconstriction. Scanning electron microscopy and X-ray analysis identified particles as silicates typical of MSHA throughout the lung. These findings suggest that particles passing through the HAPC have no change in their toxic potential in an exposure setting where particle deposition in the lung has occurred.     

Can Pickering emulsion formation aid the removal of creosote DNAPL from porous media?

The purpose of this investigation was to examine the proposition that creosote, emplaced in an initially water saturated porous system, can be removed from the system through Pickering emulsion formation. Pickering emulsions are dispersions of two immiscible fluids in which coalescence of the dispersed phase droplets is hindered by the presence of colloidal particles adsorbed at the interface between the two immiscible fluid phases. Particle trapping is strongly favoured when the wetting properties of the particles are intermediate between strong water wetting and strong oil wetting. In this investigation the necessary chemical conditions for the formation of physically stable creosote-in-water emulsions protected against coalescence by bentonite particles were examined. It was established that physically stable emulsions could be formed through the judicious addition of small amounts of sodium chloride and the surfactant cetyl-trimethylammonium bromide. The stability of the emulsions was initially established by visual inspection. However, experimental determinations of emulsion stability were also undertaken by use of oscillatory rheology. Measurements of the elastic and viscous responses to shear indicated that physically stable emulsions were obtained when the viscoelastic systems showed a predominantly elastic response to shearing. Once the conditions were established for the formation of physically stable emulsions a "proof-of-concept" chromatographic experiment was carried out which showed that creosote could be successfully removed from a saturated model porous system.     

Does lipophilicity of toxic compounds determine effects on drought tolerance of the soil collembolan Folsomia candida?

The ability of Collembola to survive drought stress is crucial for their distribution in the terrestrial environment. Previous studies have suggested that several toxic compounds affect the drought tolerance of Folsomia candida in a synergistic manner and that these compounds have the feature in common that they elicit their toxicity by causing membrane damage. We hypothesised that the detrimental effect of toxic chemicals on drought tolerance in F. candida depends on the lipophilicity (log K(ow)) of the compound because a higher log K(ow) would mean a closer interaction with membranes. In this study the three chemicals 4-nonylphenol, pyrene and p,p'-DDE were tested. Surprisingly, 4-nonylphenol, with the lowest log K(ow), was the most potent with respect to reducing drought tolerance followed by pyrene, suggesting that interactions between drought tolerance and chemical stress do not depend on lipophilicity alone.     

New particle formation of ternary droplets in the atmosphere — a steady-state nucleation kinetics approach

A self-consistent expression for the kinetics of ternary nucleation is developed based on the nucleation flux theory derived by Langer, 1969, Annals of Physics 54, 258–275. The method for obtaining the ternary nucleation flux is based on the solution of a Fokker–Planck equation for the concentration of clusters where both number and cluster energy fluctuations are included. The theory is applied to a nonideal solution of water–sulphuric acid that is nonideally mixed with ammonia. The nucleation rates predicted for this ternary system studied show a considerable increase on the nucleation rate compared to the binary water–sulphuric acid system for gaseous concentrations of ammonia which are likely to occur in the atmosphere. The results of the present study are in qualitative agreement with current laboratory and theoretical studies where a considerable enhancement in the nucleation rate is observed with the addition of tens of parts per trillion by volume of NH₃ in the binary H₂SO₄–H₂O system.     

Semi-natural habitats in the European boreal region: Caught in the socio-ecological extinction vortex?

We propose to consider semi-natural habitats—hotspots for biodiversity—being caught in a socio-ecological extinction vortex, similar to the phenomenon described for species threatened with extinction. These habitats are essentially socioecological systems, in which socioeconomic drivers are interlinked with ecological processes. We identify four highly interlinked and mutually reinforcing socio-economic processes, pertaining to the importance of semi-natural habitats for (i) agricultural production, (ii) policy, research and development; (iii) vocational education in the fields of agricultural sciences and (iv) public’s experiences with semi-natural habitats. Evidence from six countries in the boreal region demonstrates that recent slowing down or even reversal of two processes are insufficient to stop the extinction vortex phenomenon. We suggest research directions to ascertain the phenomenon, monitor its development and develop proactive actions to weaken the vortex. It is highly plausible that interventions directed at most, if not all, of the key vortex processes are needed to reverse the overall deteriorating trends of a socio-ecological system.     

What Do the Occurrences of Migratory Fishes in the Upper Mekong Mean?

This paper examines the recent appearance of four migratory species in the Upper Mekong: Dasyatis laosensis, Anguilla bicolor, Anguilla marmorata, and Chitala ornata. Since 2006 these species have been continually sampled in an area below Jinghong Dam in Xishuangbanna, China. This region is far beyond their historical upstream distribution, and the reasons for these appearances and their subsequent impact on river ecosystem are considered.     

Pre-industrial atmospheric pollution: was it important for the pH of acid-sensitive Swedish lakes?

Acid rain has caused extensive surface water acidification in Sweden since the mid-20th century. Sulfur emissions from fossil-fuel burning and metal production were the main sources of acid deposition. In the public consciousness, acid deposition is strongly associated with the industrial period, in particular the last 50 years. However, studies of lake-water pH development and atmospheric pollution, based on analyses of lake sediment deposits, have shown the importance of a long-term perspective. Here, we present a conceptual argument, using the sediment record, that large-scale atmospheric acid deposition has impacted the environment since at least Medieval times. Sulfur sources were the pre-industrial mining and metal industries that produced silver, lead and other metals from sulfide ores. This early excess sulfur deposition in southern Sweden did not cause surface water acidification; on the contrary, it contributed to alkalization, i.e. increased pH and productivity of the lakes. Suggested mechanisms are that the excess sulfur caused enhanced cation exchange in catchment soils, and that it altered iron-phosphorus cycling in the lakes, which released phosphorus and increased lake productivity.     

Does green finance improve the industrial eco-efficiency in China?

Environmental Science and Pollution Research - Improving industrial eco-efficiency is of great significance for building a beautiful China and achieving its carbon peak and neutrality targets....     

PCDD/PCDF formation in the chlor-alkali process—laboratory study and comparison with patterns from contaminated sites

Studies on the formation of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) during the electrolysis of sodium chloride solution (brine) using graphite or titanium electrodes were carried out at a laboratory scale. High concentrations of PCDFs but no PCDDs were formed in tests using graphite electrodes. With titanium electrodes, PCDFs were only formed when tar pitch was added and mainly originated from the dibenzofuran present in the tar. For the first time, a detailed assessment of the formation of mono- to octachlorinated PCDD/PCDF from tar pitch was investigated. The assessment included of the chlorination steps proved that PCDFs were formed by successive lateral chlorinated from dibenzofuran to MonoCDFs, DiCDFs, and TriCDFs to form the typical known “chlorine pattern” of TetraCDF to OctaCDF with a dominance of 1,2,7,8- and 2,3,7,8-TetraCDFs, 1,2,3,7,8-PentaCDF, and 1,2,3,4,7,8-HexaCDF as marker congeners. The final homologue distributions depended on reaction time and reaction temperature. In addition, electrolysis with non-chlorinated dibenzo-p-dioxins, dibenzofuran, and biphenyl was carried out. As a result, PCDDs, PCDFs, and PCB were formed at comparable yields. Congener patterns in soil samples from a PCDD/F-contaminated site where chlor-alkali electrolysis had been operated for decades in Japan had identical isomer distribution demonstrating the source and contamination potential and risk of these processes. Therefore, sites where in the past 120 years chlor-alkali electrolysis has been operated or where residues from chlor-alkali production or other chlorine using industries have been disposed should be assessed for their pollution level and exposure relevance. The assessment of total organohalogen content revealed that PCDF is only a small fraction of organohalogens in the contaminated soils. For an appropriate risk assessment, also other chlorinated aromatic compounds such as PCBs or PCNs need to be considered.     

Do morphometric parameters and geological conditions determine chemistry of glacier surface ice? Spatial distribution of contaminants present in the surface ice of Spitsbergen glaciers (European Arctic)

The chemism of the glaciers is strongly determined by long-distance transport of chemical substances and their wet and dry deposition on the glacier surface. This paper concerns spatial distribution of metals, ions, and dissolved organic carbon, as well as the differentiation of physicochemical parameters (pH, electrical conductivity) determined in ice surface samples collected from four Arctic glaciers during the summer season in 2012. The studied glaciers represent three different morphological types: ground based (Blomlibreen and Scottbreen), tidewater which evolved to ground based (Renardbreen), and typical tidewater glacier (Recherchebreen). All of the glaciers are functioning as a glacial system and hence are subject to the same physical processes (melting, freezing) and the process of ice flowing resulting from the cross-impact force of gravity and topographic conditions. According to this hypothesis, the article discusses the correlation between morphometric parameters, changes in mass balance, geological characteristics of the glaciers and the spatial distribution of analytes on the surface of ice. A strong correlation (r = 0.63) is recorded between the aspect of glaciers and values of pH and ions, whereas dissolved organic carbon (DOC) depends on the minimum elevation of glaciers (r = 0.55) and most probably also on the development of the accumulation area. The obtained results suggest that although certain morphometric parameters largely determine the spatial distribution of analytes, also the geology of the bed of glaciers strongly affects the chemism of the surface ice of glaciers in the phase of strong recession.     

Metabolism of acetaminophen (paracetamol) in plants—two independent pathways result in the formation of a glutathione and a glucose conjugate

Background, aim, and scope  Pharmaceuticals and their metabolites are detected in the aquatic environment and our drinking water supplies. The need for high quality drinking water is one of the most challenging problems of our times, but still only little knowledge exists on the impact of these compounds on ecosystems, animals, and man. Biological waste water treatment in constructed wetlands is an effective and low-cost alternative, especially for the treatment of non-industrial, municipal waste water. In this situation, plants get in contact with pharmaceutical compounds and have to tackle their detoxification. The mechanisms for the detoxification of xenobiotics in plants are closely related to the mammalian system. An activation reaction (phase I) is followed by a conjugation (phase II) with hydrophilic molecules like glutathione or glucose. Phase III reactions can be summarized as storage, degradation, and transport of the xenobiotic conjugate. Until now, there is no information available on the fate of pharmaceuticals in plants. In this study, we want to investigate the fate and metabolism of N-acetyl-4-aminophenol (paracetamol) in plant tissues using the cell culture of Armoracia rusticana L. as a model system. Materials and methods  A hairy root culture of A. rusticana was treated with acetaminophen in a liquid culture. The formation and identification of metabolites over time were analyzed using HPLC-DAD and LC–MSⁿ techniques. Results  With LC–MS technique, we were able to detect paracetamol and identify three of its metabolites in root cells of A. rusticana. Six hours after incubation with 1 mM of acetaminophen, the distribution of acetaminophen and related metabolites in the cells resulted in 18% paracetamol, 64% paracetamol–glucoside, 17% paracetamol glutathione, and 1% of the corresponding cysteine conjugate. Discussion  The formation of two independently formed metabolites in plant root cells again revealed strong similarities between plant and mammalian detoxification systems. The detoxification mechanism of glucuronization in mammals is mirrored by glucosidation of xenobiotics in plants. Furthermore, in both systems, a glutathione conjugate is formed. Due to the existence of P450 enzymes in plants, the formation of the highly reactive NAPQI intermediate is possible. Conclusions  In this study, we introduce the hairy root cell culture of A. rusticana L. as a suitable model system to study the fate of acetaminophen in plant tissues. Our first results point to the direction of plants being able to take up and detoxify the model substrate paracetamol. These first findings underline the great potential of using plants for waste water treatments in constructed wetlands. Recommendations and perspectives  This very first study on the detoxification of a widely used antipyretic agent in plant tissues again shows the flexibility of plant detoxification systems and their potential in waste water treatment facilities. This study covers only the very first steps of acetaminophen detoxification in plants; still, there is no data on long-term exposure as well as the possible impact of pharmaceuticals on the plant health and stress defense. Long-term experiments need to be performed to follow the fate of acetaminophen in root and leaf cells in a whole plant system, and to evaluate possible usage of plants for the remediation of acetaminophen from waste water.     

Tipping Points in the Arctic: Eyeballing or Statistical Significance?

Arctic ecosystems have experienced and are projected to experience continued large increases in temperature and declines in sea ice cover. It has been hypothesized that small changes in ecosystem drivers can fundamentally alter ecosystem functioning, and that this might be particularly pronounced for Arctic ecosystems. We present a suite of simple statistical analyses to identify changes in the statistical properties of data, emphasizing that changes in the standard error should be considered in addition to changes in mean properties. The methods are exemplified using sea ice extent, and suggest that the loss rate of sea ice accelerated by factor of ~5 in 1996, as reported in other studies, but increases in random fluctuations, as an early warning signal, were observed already in 1990. We recommend to employ the proposed methods more systematically for analyzing tipping points to document effects of climate change in the Arctic.     

What Is the Potential Measurement Error in Occupational Exposure Studies?

ABSTRACT

This paper demonstrates statistical methods that estimate measurement error from available industrial hygiene data. Errors in measuring a continuous exposure variable may arise when all individuals in a work area are assigned the same exposure. An example is when the mean of exposure measurements obtained on a sample of individuals is assigned to all workers with similar jobs. This may lead to inaccurate point and interval estimates in exposure-response modeling. A method of simulating the distribution of true (i.e., unobserved) individual exposures is described in order to estimate the mean and variance of measurement error. The minimum variance unbiased estimator approximates the mean of lognormally distributed exposure measurements. The distribution of true individual exposures is approximated by the distribution of simulated estimates of mean exposure. The methodology is illustrated by exposure data from work areas manufacturing refractory ceramic fiber (RCF) and RCF products. Results show that exposure is slightly underestimated in work areas with between 25 and 113 exposure measurements; measurement error variance averages about 1.3% of the total variance.     

What is the potential measurement error in occupational exposure studies?

This paper demonstrates statistical methods that estimate measurement error from available industrial hygiene data. Errors in measuring a continuous exposure variable may arise when all individuals in a work area are assigned the same exposure. An example is when the mean of exposure measurements obtained on a sample of individuals is assigned to all workers with similar jobs. This may lead to inaccurate point and interval estimates in exposure-response modeling. A method of simulating the distribution of true (i.e., unobserved) individual exposures is described in order to estimate the mean and variance of measurement error. The minimum variance unbiased estimator approximates the mean of lognormally distributed exposure measurements. The distribution of true individual exposures is approximated by the distribution of simulated estimates of mean exposure. The methodology is illustrated by exposure data from work areas manufacturing refractory ceramic fiber (RCF) and RCF products. Results show that exposure is slightly underestimated in work areas with between 25 and 113 exposure measurements; measurement error variance averages about 1.3% of the total variance.     

Fe(III)–EDDS complex in Fenton and photo-Fenton processes: from the radical formation to the degradation of a target compound

The present work compares the efficiency of homogenous Fenton and photo-Fenton processes in the presence of Fe(III)–EDDS complex under different experimental conditions. 4-tert-Butylphenol (4-t-BP), which is one of the endocrine disrupting chemicals, was used as a model pollutant to investigate the Fenton and photo-Fenton application. The efficiency of homogenous photo-Fenton process was significantly much higher than homogenous Fenton process, which is due to the rapid formation of Fe²⁺ under UV irradiation of the iron complex and the photochemical formation of HO^? from the photolysis of the complex Fe(III)–EDDS. Through the degradation of 4-t-BP, the effect of Fe(III)–EDDS concentration, H₂O₂ concentration, pH, and oxygen was investigated in both processes. Such trend was also correlated with pH calculating the polychromatic Fe²⁺ quantum yield formation at pH 4.0, 6.0, and 8.6. The results showed that at high Fe(III)–EDDS and H₂O₂ concentrations, a negative effect was found. By the way, the Fenton process was found to be enhanced at basic pH. These results can be very useful for the use and optimization of such iron complex in water treatment process as function of different physico-chemical conditions.