固相萃取技术在水源地特定项目监测中的应用

采用C18固相萃取(SPE)技术测定水中36种半挥发性有机物(SVOCs),包括硝基苯类、氯苯类、有机氯农药类、有机磷农药类、多环芳烃类共五类有机化合物,用GC-MS分析.研究了有机改性剂对回收率的影响,1L水样加入7ml甲醇对回收率有较好改善.结果表明,平均回收率为51%～118%,相对标准偏差在1.90%～9.79%之间,方法检出限为0.02μg/L～0.32μg/L.该方法适用于监测水源水中多种痕量SVOCs.     

Determination of volatile organic compounds pollution sources in malaysian drinking water using multivariate analysis

A field investigation was conducted at all water treatment plants throughout 11 states and Federal Territory in Peninsular Malaysia. The sampling points in this study include treatment plant operation, service reservoir outlet and auxiliary outlet point at the water pipelines. Analysis was performed by solid phase micro-extraction technique with a 100 μm polydimethylsiloxane fibre using gas chromatography with mass spectrometry detection to analyse 54 volatile organic compounds (VOCs) of different chemical families in drinking water. The concentration of VOCs ranged from undetectable to 230.2 μg/l. Among all of the VOCs species, chloroform has the highest concentration and was detected in all drinking water samples. Average concentrations of total trihalomethanes (THMs) were almost similar among all states which were in the range of 28.4--33.0 μg/l. Apart from THMs, other abundant compounds detected were cis and trans-1,2-dichloroethylene, trichloroethylene, 1,2-dibromoethane, benzene, toluene, ethylbenzene, chlorobenzene, 1,4-dichlorobenzene and 1,2-dichloro - benzene. Principal component analysis (PCA) with the aid of varimax rotation, and parallel factor analysis (PARAFAC) method were used to statistically verify the correlation between VOCs and the source of pollution. The multivariate analysis pointed out that the maintenance of auxiliary pipelines in the distribution systems is vital as it can become significant point source pollution to Malaysian drinking water.     

Soil sampling and analysis for volatile organic compounds

Concerns over data quality have raised many questions related to sampling soils for volatile organic compounds (VOCs). This paper was prepared in response to some of these questions and concerns expressed by Remedial Project Managers (RPMs) and On-Scene Coordinators (OSCs). The following questions are frequently asked:

1. Is there a specific device suggested for sampling soils for VOCs?
2. Are there significant losses of VOCs when transferring a soil sample from a sampling device (e.g., split spoon) into the sample container?
3. What is the best method for getting the sample from the split spoon (or other device) into the sample container?
4. Are there smaller devices such as subcore samplers available for collecting aliquots from the larger core and efficiently transferring the sample into the sample container?
5. Are certain containers better than others for shipping and storing soil samples for VOC analysis?
6. Are there any reliable preservation procedures for reducing VOC losses from soil samples and for extending holding times?

Guidance is provided for selecting the most effective sampling device for collecting samples from soil matrices. The techniques for sample collection, sample handling, containerizing, shipment, and storage described in this paper reduce VOC losses and generally provide more representative samples for volatile organic analyses (VOA) than techniques in current use. For a discussion on the proper use of sampling equipment the reader should refer to other sources (Acker, 1974; U.S. EPA, 1983; U.S. EPA, 1986a). Soil, as referred to in this report, encompasses the mass (surface and subsurface) of unconsolidated mantle of weathered rock and loose material lying above solid rock. Further, a distinction must be made as to what fraction of the unconsolidated material is soil and what fraction is not. The soil component here is defined as all mineral and naturally occurring organic material that is 2 mm or less in size. This is the size normally used to differentiate between soils (consisting of sands, silts, and clays) and gravels. Although numerous sampling situations may be encountered, this paper focuses on three broad categories of sites that might be sampled for VOCs:

1. Open test pit or trench.
2. Surface soils (<5 ft in depth).
3. Subsurface soils (>5 ft in depth).

     

Fluorescent screening of phytoplankton and organic compounds in sea water

The flow-through spectrofluorometers, FLUO-IMAGER, were developed to measure the abundance of phytoplankton, including the analysis of pigment composition and concentration of organic pollution and dissolved organic matter (DOM), in continuous mode. The measurements can be carried out without the time-consuming pretreatment of water samples. The analytical concept uses the technique of spectral fluorescent signatures (SFS), based on the systematized spectral library comprising the SFS of major phytoplankton species and chemical pollution. The SFS technique has been applied for several years in qualitative and quantitative screening of organic compounds and phytoplankton in the Baltic, North and Norwegian Seas. The results of the analysis of phytoplankton pigments, the dynamic processes of bloom development, DOM and oil pollution are presented.     

Novel integrative passive samplers for the long-term monitoring of semivolatile organic air pollutants

Two types of passive sampler were developed for the long-term monitoring of semivolatile organic compounds (SOCs) in air. They consist of poly(dimethylsiloxane) (PDMS)-coated stir bars (type A) or silicone tubing (type B), acting as a solid receiving medium, enclosed in a heat-sealed low-density polyethylene (LDPE) membrane. These samplers combine the advantages of integrative passive sampling with those of analysing accumulated analytes by thermodesorption-GC-MS, whilst avoiding the use of solvents and expensive sample preparation and cleanup steps. The performance of these samplers was investigated for the integrative sampling of SOCs, including alpha- and gamma-hexachlorocyclohexanes, hexachlorobenzene, 2,4,4'-trichlorobiphenyl, 2,2',5,5'-tetrachlorobiphenyl and fluoranthene, in laboratory exposure experiments under controlled conditions. For both types of sampler, the uptake of all the analytes investigated was linear over an exposure period of 15 days. The sampling rates calculated ranged from 70 to 320 ml h(-1) (sampler A) and 630 to 4300 ml h(-1) (sampler B). The passive samplers are able to detect low time-weighted average air concentrations in the pg m(-3) range. The small, robust and inexpensive sampling devices were tested successfully for the long-term air monitoring of semivolatile organic pollutants in a polluted area over an exposure period of up to 28 days.     

水体有机污染物分析的研究进展

评述了水体有机污染物分析中GC、GC-MS、LC、GC-FTIR等方法的特性和适用范围,介绍了应用各种分析方法分析水体有机污染物的研究现状,提出了水体有机污染物分析的发展方向。     

Investigation and assessment of volatile organic compounds in water sources in China

456 water samples collected from 152 water sources in 2006 were analyzed for 21 volatile organic compounds (VOCs). Concentrations of 21 VOCs ranged from below method detection limits of the laboratory to 7.65 ??g/L (toluene), but seldom exceeded the concentration limits set in the National Drinking Water Quality Standards (GB5749-2006) or the National Environmental Quality Standards for Surface Water (GB3838-2002) of China. Of the 21 individual VOCs analyzed, 11 VOCs were detected in at least one sample at or above 1.0 ??g/L; 6.6% of the water samples had a detection of at least one VOC at or above 1.0 ??g/L, and 2.6% had a detection of at least two VOCs at or above 1.0 ??g/L. Based on the statistical data of detection frequencies above the method detection limits, 75% of the samples detected at least one VOC, and 65% of the samples detected at least two VOCs. Chloroform, toluene, and 1,2-dichloroethene were the three most frequently detected VOCs, with detection frequencies of 76.97%, 68.42%, and 44.08%, respectively. Volatile halogenated hydrocarbons and gasoline components were the two most frequently detected VOC groups.     

水样中痕量有机物分析的前处理方法

对几种常用或新近发展起来的水中有机物分析的前处理方法作了简要论述 ,着重讨论了它们的应用特点、优缺点以及发展前景     

Performance optimization of a membrane assisted passive sampler for monitoring of ionizable organic compounds in water

A thin-walled silicone rubber hollow fibre membrane has been developed as a passive sampler. The inside of the tube is filled with an aqueous solution at an appropriate pH. The tube is sealed at both ends and then immersed in a water sample. In order for the ionizable permeating compounds to be trapped in the aqueous receiving phase, the pH is adjusted such that the compounds are ionized and trapped. The major advantages are its simplicity, low cost and high selectivity, since only ionizable organic compounds are trapped. Additionally, the sampler uses no organic solvent. By adjusting the pH of the acceptor phase, it is possible to control the extraction process and whether the sampler is used in the kinetic or equilibrium regime. Since it is very selective, no further clean-up of the extract is required. The membrane assisted passive sampler has been tested for extraction of chlorophenols under laboratory conditions. The extraction process was found to be linear over a 72 h sampling period. Selectivity of the passive sampler in river water was demonstrated and the extraction process was independent of sample concentration, even at lower concentration levels of analytes. However, the sample matrix in some river water samples led to incomplete trapping, thereby reducing the amount trapped in the acceptor phase. Detection limits (three times signal to noise ratio) were dependant on sample matrix and type of detection system and ranged from 0.05 microg L(-1) to about 1 microg L(-1) with a UV photodiode detector in water samples from one river and 1.0 microg L(-1) to 20 microg L(-1) in another but with an ordinary UV detector. The enrichment factors in river water were 28 for 2-chlorophenol and 44 for 2,4-dichlorophenol over a 72 h sampling period. 4-chlorophenol was poorly extracted and its enrichment factor was 3.     

顶空固相微萃取-毛细管气相色谱表面发射火焰光度法测定淡水中有机锡化合物

采用固相微萃取(SPME)技术对河水样品中的丁基锡化合物进行富集后直接用气相色谱分离测定.实验中应用了涂层性质和厚度各不相同的商品纤维,也应用了自制的吸附纤维,将所得结果进行比较,发现100μm聚二甲基硅氧烷涂层萃取各丁基锡化合物的灵敏度及重现性均是最好的.将依此为基础建立的SPME-GC-FPD方法用于河水中有机锡化合物的测定,方法非常灵敏和快速.     

A dual channel gas chromatograph for atmospheric analysis of volatile organic compounds including oxygenated and monoterpene compounds

A dual channel gas chromatograph with flame ionisation detectors has been used extensively for analysis of volatile organic compounds in the atmosphere and forms the basis of two monitoring instruments contributing VOC data to the World Meteorological Organisation - Global Atmosphere Watch network. Recent modifications to the methodology have broadened the scope of the instrument; to incorporate measurements of selected monoterpenes, and achieve improved accuracy in the measurement of oxygenated volatile organic compounds. Analysis of selected monoterpenes has been achieved without any significant loss of resolution of the non-methane hydrocarbons or oxygenated compounds. Quantification of 64 different VOCs of varying functionalities are reported with detection limits in the range 1-5 parts per trillion. Here we present a summary of the instrumental and calibration details for the methodology, which continues to be used on many field projects, along with a discussion of the associated measurement uncertainties.     

利用保留时间锁定软件对水中挥发性有机物进行气相色谱测定

使用保留时间锁定软件 (RTL) ,在气相色谱体系中建立了水质中 5 3种挥发性有机物的保留时间数据库 ,使原始的保留时间成为化合物定性的可靠参数 ,实现了未知样品在色谱仪上的定性 ,提高了分析效率。     

A comparison of sampling and analysis methods for low-ppbC levels of volatile organic compounds in ambient air

A carefully designed study was conducted during the summer of 1998 to collect samples of ambient air by canisters and compare the analysis results to direct sorbent preconcentration results taken at the time of sample collection. Thirty-two 1 h sample sets were taken, each composed of a "near-real-time" sample analyzed by an autoGC-MS XonTech 930/Varian Saturn 2000 system, and Summa and Silco canisters. Hourly total non-methane organic carbon (TNMOC), ozone, and meteorological measurements were also made. Each canister was analyzed on the autoGC-MS system for a target list of 108 volatile organic compounds (VOCs) and on a manual cryosampling GC-FID system. Comparisons were made between the collection and analysis methods. Because of the low sample loading (150-250 ppbC TNMOC), these comparisons were a stringent test of sample collection and analysis capabilities. The following specific conclusions may be drawn from this study. Reasonable precision (within 15% mean difference of duplicate analyses from the same canister) can be obtained for analyses of target VOCs at low-ppbC concentrations. Relative accuracy between the GC-MS and GC-FID analysis methods is excellent, as demonstrated by comparisons of analyses of the same canisters, if measurements are sufficiently above the detection limits. This is especially significant as the GC-MS and GC-FID were independently calibrated. While statistically significant differences may be observed between the results from canister and near-real-time samples, the differences were generally small and there were clear correlations between the canister results and the near-real-time results. Canister cleanliness limits detection below the EPA Method TO-14 acceptance standard of 0.2 ppbv (0.2-2 ppbC for target analytes).     

降水中有机物的分析与研究

用气相色谱 -质谱联用的方法分析雨水中的有机物 ,在 4月份采集的 5个样品中 ,共分离鉴定出 15 8种有机化合物并对检出的有机化合物进行研究     

非平衡固相微萃取-气相色谱-质谱测定水中甲拌磷的研究

利用100μmPDMS(聚二甲基硅氧烷)涂层,建立了非平衡固相微萃取＿气相色谱＿质谱联用测定水中甲拌磷的新方法。在萃取效果确证的基础上,对溶液体积、萃取时间、搅拌速度和溶液离子强度等实验条件进行了优化。方法的线性范围为0 005～50μg/L,相关系数为0 997,检测限(信噪比3∶1)为0 002μg/L,对于0 1μg/L的甲拌磷相对标准偏差(n=6)为7 16%。所建立的方法直接用于田间表面水和河水样品中甲拌磷的测定,结果满意。     

An evaluation of a fast sampling procedure for the trace analysis of volatile organic compounds in ambient air

This study deals with the evaluation of a fast method for sampling of volatile organic compounds in ambient air. Special bags made of an inert material are used together with a large handpump which allows a sampling of one liter per second. After the sampling, the pollutants are concentrated by adsorption on Tenax and transfered by heat desorption, to a small capillary precolumn cooled with liquid nitrogen, or directly trapped on the precolumn. The suitability of this technique was evaluated by sampling complex synthetic mixtures of known concentration and composition, after which the samples were submitted to a series of operations such as transport, aging, changing of the humidity, heating and cooling, irradiation, etc. Changes in the original mixtures, caused by adsorption, diffusion, chemical or photochemical reactions were investigated by GC-MS analysis. The results of the study show that under certain conditions the samples can be preserved for a rather long period of time without noticeable changes in composition. However for certain compounds, severe quantitative losses occur after one day storage. Finally a practical application of this method is described in a recent case of strong odour annoyance by a chemical plant in the north of Belgium.     

Ultrasound-assisted ionic liquid-based microextraction combined with least squares support vector machines regression for the simultaneous determination of aluminum,gallium, and indium in water and coal samples

A new simple and rapid ultrasound-assisted ionic liquid-based microextraction method was applied to preconcentrate aluminum(III), gallium(III), and indium(III) ions from water samples as a prior step to their simultaneous spectrophotometric determination using least squares support vector machines regression. In the novel procedure, 1-hexyl-3-methylimidazolium hexafluorophosphate [C₆MIM][PF₆] was dispersed into the aqueous sample solution as fine droplets by ultrasonication, and the analytes were extracted into the ionic liquid phase after complexation with 1,2,5,8-tetrahydroxy anthraquinone (quinalizarine). After centrifuging, the fine droplets of extractant phase were settled to the bottom of the conical-bottom glass centrifuge tube. The detection limits for Al(III), Ga(III), and In(III) were 1.70, 2.02, and 2.06 ng mL⁻¹, respectively. The precision of the method, evaluated as the relative standard deviation obtained by analyzing a series of ten replicates, was below 3.2% for all elements. The method was successfully applied for the determination of Al(III), Ga(III), and In(III) in real samples.     

Comparing removal of trace organic compounds and assimilable organic carbon (AOC) at advanced and traditional water treatment plants

Stability of drinking water can be indicated by the assimilable organic carbon (AOC). This AOC value represents the regrowth capacity of microorganisms and has large impacts on the quality of drinking water in a distribution system. With respect to the effectiveness of traditional and advanced processing methods in removing trace organic compounds (including TOC, DOC, UV₂₅₄, and AOC) from water, experimental results indicate that the removal rate of AOC at the Cheng Ching Lake water treatment plant (which utilizes advanced water treatment processes, and is hereinafter referred to as CCLWTP) is 54%, while the removal rate of AOC at the Gong Yuan water treatment plant (which uses traditional water treatment processes, and is hereinafter referred to as GYWTP) is 36%. In advanced water treatment units, new coagulation–sedimentation processes, rapid filters, and biological activated carbon filters can effectively remove AOC, total organic carbon (TOC), and dissolved organic carbon (DOC). In traditional water treatment units, coagulation–sedimentation processes are most effective in removing AOC. Simulation results and calculations made using the AutoNet method indicate that TOC, TDS, NH₃-N, and NO₃-N should be regularly monitored in the CCLWTP, and that TOC, temperature, and NH₃-N should be regularly monitored in the GYWTP.     

Models for the adsorption of organic compounds at gas-water interfaces

The solvation parameter model is used to characterize interactions responsible for adsorption at the gas-water interface for bulk water at 15 and 25 degrees C, snow at -6.8 degrees C, mineral-supported water films (alumina, calcium carbonate and quartz) at 15 degrees C, and dry soil at 15 degrees C. The mineral-supported water films and dry soil adsorption data are modeled at different relative humidities in the range 40-99%. The models produce satisfactory results with standard errors of the estimate of 0.12 to 0.17 for regression of the model predicted adsorption equilibrium constants against the experimental values (range for equilibrium constants -2 to -7 log units). The water surface is polar with a significant capacity for dipole-type and hydrogen-bonding interactions. In addition, it is strongly electron lone pair repulsive. Dispersion interactions favor adsorption at the water surface. Mineral-supported water films at relative humidities greater than 40% demonstrate adsorption properties similar to bulk water. The adsorption characteristics, however, depend on the relative humidity and the nature of the support. In the case of dry soil the adsorption properties at different relative humidities cannot simply be explained by adsorption of a water film covering the soil surface and the changes in adsorption characteristics with relative humidity are more complex than the mineral-supported water films.