Feasibility of energy recovery from municipal solid waste in an integrated municipal energy supply and waste management system.

A decision-support model for determining the feasibility of a planned energy-from-waste (EfW) investment for an integrated waste management and energy supply system is presented. The aim is to present an easy-to-understand, inexpensive and fast-to-use tool to decision-makers for modelling and evaluating different kinds of processes. Special emphasis is put on forming the model and interpretation of the results of the example case. The simple integrated system management (SISMan) model is presented through a practical example of the use of the model. In the example the viability of the described system is studied by comparing five different cases including different waste-derived fuels (WDF), non-segregated municipal solid waste (MSW) being one of the fuel options. The nominal power output of the EfW plant varied in each case according to the WDF classification. The numeric values for two main variables for each WDF type were determined, the WDF price at the gate of the EfW plant and the waste management fee (WMF) according to the 'polluter pays' -principle. Comparison between the five cases was carried out according to two determinants, the WMF related to each case and the recovery rate related to each case. The numeric values for the constants and variables used in the calculations were chosen as realistically as possible using available data related to the issue. In the example of this paper, the mass-incineration solution ('pure' MSW as a fuel) was found to be the most viable solution for the described system according to the calculations. However, the final decision of the decision-makers might differ from this in the real world due to extra 'fuzzy' information that cannot be reliably included in the calculations. This paper shows that certain key values of modelled systems can be calculated using an easy-to-use tool at the very early stages of a larger design process involving municipal and business partners. The use of this kind of tools could significantly decrease the overall design costs of large systems in the long run by cutting out irrational system options at the very beginning of the planning.     

Material and energy recovery in integrated waste management systems: project overview and main results

This paper describes the context, the basic assumptions and the main findings of a joint research project aimed at identifying the optimal breakdown between material recovery and energy recovery from municipal solid waste (MSW) in the framework of integrated waste management systems (IWMS). The project was carried out from 2007 to 2009 by five research groups at Politecnico di Milano, the Universities of Bologna and Trento, and the Bocconi University (Milan), with funding from the Italian Ministry of Education, University and Research (MIUR). Since the optimization of IWMSs by analytical methods is practically impossible, the search for the most attractive strategy was carried out by comparing a number of relevant recovery paths from the point of view of mass and energy flows, technological features, environmental impact and economics. The main focus has been on mature processes applicable to MSW in Italy and Europe. Results show that, contrary to a rather widespread opinion, increasing the source separation level (SSL) has a very marginal effects on energy efficiency. What does generate very significant variations in energy efficiency is scale, i.e. the size of the waste-to-energy (WTE) plant. The mere value of SSL is inadequate to qualify the recovery system. The energy and environmental outcome of recovery depends not only on "how much" source separation is carried out, but rather on "how" a given SSL is reached.     

A comparative assessment of waste incinerators in the UK

The uptake in Europe of Energy from Waste (EfW) incinerator plants has increased rapidly in recent years. In the UK, 25 municipal waste incinerators with energy recovery are now in operation; however, their waste supply chains and business practices vary significantly. With over a hundred more plant developments being considered it is important to establish best business practices for ensuring efficient environmental and operational performance. By reviewing the 25 plants we identify four suitable case study plants to compare technologies (moving grate, fluidised bed and rotary kiln), plant economics and operations. Using data collected from annual reports and through interviews and site visits we provide recommendations for improving the supply chain for waste incinerators and highlight the current issues and challenges faced by the industry. We find that plants using moving grate have a high availability of 87–92%. However, compared to the fluidised bed and rotary kiln, quantities of bottom ash and emissions of hydrogen chloride and carbon monoxide are high. The uptake of integrated recycling practices, combined heat and power, and post incineration non-ferrous metal collections needs to be increased among EfW incinerators in the UK. We conclude that one of the major difficulties encountered by waste facilities is the appropriate selection of technology, capacity, site, waste suppliers and heat consumers. This study will be of particular value to EfW plant developers, government authorities and researchers working within the sector of waste management.     

The use of commercial and industrial waste in energy recovery systems - A UK preliminary study

With 2020 energy targets set out by the EU fast approaching, the UK is trying to source a higher proportion of its energy from renewable resources. Coupled with this, a growing population and increasing trends in consumer demand have resulted in national waste loads increasing. A possible solution to both issues is energy-from-waste (EfW) technologies. Many studies have focused on municipal solid waste (MSW) as a potential feedstock, but appear to overlook the potential benefits of commercial and industrial waste (C&IW). In this study, samples of C&IW were collected from three North West waste management companies and Lancaster University campus. The samples were tested for their gross and net calorific value, moisture content, ash content, volatile matter, and also elemental composition to determine their suitability in EfW systems. Intra-sample analysis showed there to be little variation between samples with the exception two samples, from waste management site 3, which showed extensive variation with regards to net calorific value, ash content, and elemental analysis. Comparisons with known fuel types revealed similarities between the sampled C&IW, MSW, and refuse derived fuel (RDF) thereby justifying its potential for use in EfW systems. Mean net calorific value (NCV) was calculated as 9.47 MJ/kg and concentrations of sulphur, nitrogen, and chlorine were found to be below 2%. Potential electrical output was calculated using the NCV of the sampled C&IW coupled with four differing energy generation technologies. Using a conventional incinerator with steam cycle, total electrical output was calculated as 24.9 GWh, based on a plant operating at 100,000 tpa. This value rose to 27.0 GWh when using an integrated gasification combined cycle. A final aspect of this study was to deduce the potential total national electrical output if all suitable C&IW were to be used in EfW systems. Using incineration coupled with a steam turbine, this was determined to be 6 TWh, 1.9% of the national demand thereby contributing 6.5% towards the UK’s 2020 renewable electricity target.     

Material and energy recovery in integrated waste management systems: the potential for energy recovery

This article is part of a set of six coordinated papers reporting the main findings of a research project carried out by five Italian universities on "Material and energy recovery in Integrated Waste Management Systems (IWMS)". An overview of the project and a summary of the most relevant results can be found in the introductory article of the series. This paper describes the work related to the evaluation of mass and energy balances, which has consisted of three major efforts (i) development of a model for quantifying the energy content and the elemental compositions of the waste streams appearing in a IWMS; (ii) upgrade of an earlier model to predict the performances of Waste-to-Energy (WtE) plants; (iii) evaluation of mass and energy balances of all the scenarios and the recovery paths considered in the project. Results show that not only the amount of material available for energy recovery is significantly higher than the Unsorted Residual Waste (URW) left after Separate Collection (SC), because selection and recycling generate significant amounts of residues, but its heating value is higher than that of the original, gross waste. Therefore, the energy potential of what is left after recycling is always higher than the complement to 100% of the Source Separation Level (SSL). Also, increasing SSL has marginal effects on the potential for energy recovery: nearly doubling SSL (from 35% to 65%) reduces the energy potential only by one fourth. Consequently, even at high SSL energy recovery is a fundamental step of a sustainable waste management system. Variations of SSL do bring about variations of the composition, heating value and moisture content of the material fed to WtE plants, but these variations (i) are smaller than one can expect; (ii) have marginal effects on the performances of the WtE plant. These considerations suggest that the mere value of SSL is not a good indicator of the quality of the waste management system, nor of its energy and environmental outcome. Given the well-known dependence of the efficiency of steam power plants with their power output, the efficiency of energy recovery crucially depends on the size of the IWMS served by the WtE plant. A fivefold increase of the amount of gross waste handled in the IWMS (from 150,000 to 750,000 tons per year of gross waste) allows increasing the electric efficiencies of the WtE plant by about 6-7 percentage points (from 21-23% to 28.5% circa).     

Alternative strategies for energy recovery from municipal solid waste Part A: Mass and energy balances

This two-part paper assesses four strategies for energy recovery from municipal solid waste (MSW) by dedicated waste-to-energy (WTE) plants generating electricity through a steam cycle. The feedstock is the residue after materials recovery (MR), assumed to be 35% by weight of the collected MSW. In strategy 1, the MR residue is fed directly to a grate combustor. In strategy 2, the MR residue is first subjected to light mechanical treatment. In strategies 3 and 4, the MR residue is converted into RDF, which is combusted in a fluidized bed combustor. To examine the relevance of scale, we considered a small waste management system (WMS) serving 200,000 people and a large WMS serving 1,200,000 people. A variation of strategy 1 shows the potential of cogeneration with district heating. The assessment is carried out by a Life Cycle Analysis where the electricity generated by the WTE plant displaces electricity generated by fossil fuel-fired steam plants. Part A focuses on mass and energy balances, while Part B focuses on emissions and costs. Results show that treating the MR residue ahead of the WTE plant reduces energy recovery. The largest energy savings are achieved by combusting the MR residue "as is" in large scale plants; with cogeneration, primary energy savings can reach 2.5% of total societal energy use.     

Characterization of municipal solid waste combustion in a grate furnace

The objective of this paper is to evaluate the combustion process of municipal solid waste combustion in a grate furnace both experimentally and numerically by using data of a reference experiment with over-stoichiometric primary air supply. Measurements were carried out inside the combustion chamber of a pilot plant by monitoring temperatures and sampling gaseous combustion products along the bed surface. The data were assessed using elemental and energy balances. Experimental data of the axial temperature profiles of the flue gas, the fuel bed and the grate bars, as well as local gas flows and the flue gas composition measured above the fuel bed along the grate were used to describe the conversion process, including drying and carbon burnout. These data served as input to model the thermo- and fluid dynamic processes of the gas phase above the bed inside the combustion chamber. For this purpose the commercial code FLUENT was employed to carry out the simulations. Thus, the turbulent temperature, flow and species distributions in the combustion chamber of the pilot waste incinerator TAMARA were predicted. The results of the FLUENT modeling showed that under the prevailing conditions the flue gas burnout is almost completed before entering the first flue due to high temperatures, effective mixing and sufficient residence times of the flue gas inside the combustion chamber. This agrees well with the experimental results inside the first flue. On the basis of the above mentioned results, design and parametric studies can be carried out in a more efficient way by saving cost and time.     

Mathematical modelling as a tool for environmental evaluation of industrial sectors in Colombia

A general mathematical model has been developed as a tool for environmental evaluation of industrial chemical processes. This model is based on the life cycle assessment (LCA) methodology and includes a modular and cumulative conceptual approximation. Accordingly, the model considers the potential effects on the environment caused by mass, energy and exergy flows. For environmental loads related with mass flows, two main categories are defined: pollution and perturbation environmental effects. Whereas for the environmental effect associated with energy flows, a factor defined as “energy dissipation” is employed, and similarly for exergy flows, a “exergy destruction” parameter is used. The measurement unit employed throughout the model is expressed in terms of “potential environmental impact units/hour”. As an example study case, the integrated production chain (IPC) for nitric acid production in the Colombian context is evaluated. This particular IPC includes the ammonia production plant, energy plants and main process plant. The results demonstrate that for environmental perturbation effects based on mass flows, the main contribution in the IPC corresponds to the energy plants. In the case of pollution environmental loads, the principal contribution relates to ammonia production. Regarding environmental effects associated with energy flows, the highest “energy dissipation” factor corresponds to the main process, followed in order by the ammonia process. Finally, for the effect denominated as “exergy destruction”, it could be established that Colombian energy plants show the highest contribution in the IPC.     

Balancing the energy demand by a resource circulation project in Daejeon,Korea

Demand for sustainable renewable energy is on an increase worldwide, whereas the supply is limited. This paper analyses the feasibility of generating electricity and supplying the surplus steam to Daeduk Industrial Complex, by incinerating the combustible municipal waste generated in Daejeon Metropolitan City. The economic feasibility of surplus biogas generated from the anaerobic digestion of food waste and food waste leachate has been analysed. This study estimated resource circulation facility to supply 23,200 m³/day of biogas generated to Daejeon Combined Heat and Power plant. By 2023, it is expected to supply 25.7 tons of steam per hour all year round. The additional steam demand in Daeduk Industrial Complex is estimated as 101,537 tons/year. Surplus biogas will be supplied through an additional 960-m new installation. The cost of biogas is estimated at 30% of the unit biogas production cost. Daejeon Combined Heat and Power plant expects to make 60% additional profit, and Daeduk Industrial Complex and the communities nearby expect to achieve 10% cost savings. It also reduces the dependence of energy on fossil fuels, contributes to national environmental energy policy in reduction in greenhouse gases, creates competitiveness in local business and reduces corporate tax and generates revenue.     

The waste reduction (WAR) algorithm: environmental impacts, energy consumption, and engineering economics

A general theory known as the waste reduction (WAR) algorithm has been developed to describe the flow and the generation of potential environmental impact through a chemical process. The theory defines indexes that characterize the generation and the output of potential environmental impact from a process. The existing theory has been extended to include the potential environmental impact of the energy consumed in a chemical process. Energy will have both an environmental impact as well as an economic impact on process design and analysis. Including energy into the analysis of environmental impact is done by re-writing the system boundaries to include the power plant which supplies the energy being consumed by the process and incorporating the environmental effects of the power plant into the analysis. The effect of this addition on the original potential impact indexes will be discussed. An extensive engineering economic evaluation has been included in the process analysis which inherently contains the cost of the consumed energy as an operating cost. A case study is presented which includes a base process design and two modifications to the base design. Each design is analyzed from an economic perspective and an environmental impact perspective. The environmental impact analysis is partitioned into the impacts of the non-product streams and the impacts of the energy generation/consumption process. The comparisons of these analysis procedures illustrate the consequences for decision making in the design of environmentally friendly processes.     

利用生活垃圾填埋场上建设飞灰固化物填埋场适宜性探讨

针对利用原有生活垃圾填埋场改扩建飞灰固化物填埋场,从勘查设计和建设角度,通过与常规生活垃圾填埋的安全和环保各相关因素对比,分析扩建前后填埋场稳定性、防渗及导排系统等勘察设计要点,研讨扩建工程新老填埋堆体基础层、防渗及导排系统等安全环保关键技术及扩建的适宜性,为扩建的可行性研究提出较为系统的技术论证思路.     

油脂工业废水的回用

以某油脂化工厂排放的达标废水为研究对象,提出了微絮凝-直接过滤、二级活性炭吸附、二氧化氯氧化消毒串连的深度处理工艺,并在小试基础上进行了油脂废水再生回用的工业化试验研究,处理规模为400m^3／d。处理后出水中COD、浊度、色度、阴离子表面活性剂（LAS）含量、细菌总数等均满足市政供水水质标准。回用水可作为碱化车间和油脂预处理车间的生产补充用水。     

Sewage sludge drying by energy recovery from OFMSW composting: Preliminary feasibility evaluation

In this paper an original energy recovery method from composting is analyzed. The integrated system exploits the heat available from the aerobic biochemical process in order to support the drying of sewage sludge, using a specific solar greenhouse. The aim is to tackle the problem of organic waste treatment, with specific regard to food waste. This is done by optimizing the energy consumption of the aerobic process of composting, using the heat produced to solve a second important waste management problem such as the sewage waste treatment. Energy and mass balances are presented in a preliminary feasibility study. Referring to a composting plant with a capacity of 15,000 t/y of food waste, the estimation of the power from recovered heat for the entire plant resulted about 42 kW. The results demonstrated that the energy recoverable can cover part of the heat necessary for the treatment of sludge generated by the population served by the composting plant (in terms of food waste and green waste collection). The addition of a renewable source such as solar energy could cover the residual energy demand. The approach is presented in detail in order for it to be replicated in other case studies or at full scale applications.     

Material and energy recovery in integrated waste management systems: an innovative approach for the characterization of the gaseous emissions from residual MSW bio-drying

In the sector of residual municipal solid waste management an increasing attention is put towards the role of biological treatments like bio-drying and bio-stabilization in order to decrease the need of landfilling volumes. The literature shows a lack of information concerning the emission factor of pollutants released from these processes. The available data are generally spot characterizations of concentration and air flow-rate that are used together in order to assess the emission factors. This approach caused significant differences among the available data as the release of pollutants is not steady. This paper belongs to a group of six papers concerning a research on material and energy recovery in integrated waste management systems, developed by a network of five universities. The contribution of the University of Trento, focuses on the bio-drying process with the following targets: (a) developing an innovative low cost method of sampling/measurement able to take into account the dynamics of release of pollutants; (b) checking the efficiency of a bio-filter; (c) verifying the variability of generation of some pollutants; (d) generating emission factors. The research was developed using a bio-drying pilot plant. As a treatment of the process air, the bio-reactor was coupled with a bio-filter. The emissions were characterized using an original approach based on the adoption of two measurement chambers suitable for hosting passive samplers. The passive samplers allowed the characterization of VOCs, N(2)O, NH(3) and H(2)S. A bio-chemical model, useful for energy and mass balances, supported the interpretation of the presented bio-drying run.     

SLFP: a stochastic linear fractional programming approach for sustainable waste management

A stochastic linear fractional programming (SLFP) approach is developed for supporting sustainable municipal solid waste management under uncertainty. The SLFP method can solve ratio optimization problems associated with random information, where chance-constrained programming is integrated into a linear fractional programming framework. It has advantages in: (1) comparing objectives of two aspects, (2) reflecting system efficiency, (3) dealing with uncertainty expressed as probability distributions, and (4) providing optimal-ratio solutions under different system-reliability conditions. The method is applied to a case study of waste flow allocation within a municipal solid waste (MSW) management system. The obtained solutions are useful for identifying sustainable MSW management schemes with maximized system efficiency under various constraint-violation risks. The results indicate that SLFP can support in-depth analysis of the interrelationships among system efficiency, system cost and system-failure risk.     

Early detection and evaluation of waste through sensorized containers for a collection monitoring application

The present study describes a novel application for use in the monitoring of municipal solid waste, based on distributed sensor technology and geographical information systems. Original field testing and evaluation of the application were carried out in Pudong, Shanghai (PR China).The local waste management system in Pudong features particular requirements related to the rapidly increasing rate of waste production. In view of the fact that collected waste is currently deployed to landfills or to incineration plants within the context investigated, the key aspects to be taken into account in waste collection procedures include monitoring of the overall amount of waste produced, quantitative measurement of the waste present at each collection point and identification of classes of material present in the collected waste. The case study described herein focuses particularly on the above mentioned aspects, proposing the implementation of a network of sensorized waste containers linked to a data management system.Containers used were equipped with a set of sensors mounted onto standard waste bins. The design, implementation and validation procedures applied are subsequently described. The main aim to be achieved by data collection and evaluation was to provide for feasibility analysis of the final device. Data pertaining to the content of waste containers, sampled and processed by means of devices validated on two purpose-designed prototypes, were therefore uploaded to a central monitoring server using GPRS connection. The data monitoring and management modules are integrated into an existing application used by local municipal authorities.A field test campaign was performed in the Pudong area. The system was evaluated in terms of real data flow from the network nodes (containers) as well as in terms of optimization functions, such as collection vehicle routing and scheduling. The most important outcomes obtained were related to calculations of waste weight and volume. The latter data were subsequently used as parameters for the routing optimization of collection trucks and material density evaluation.     

Inundation Analysis in the Coastal Area Considering Climate Change Due to Global Warming

This paper describes the possible inundation scenarios under sea level rise conditions due to global climate change with particular reference to Nagoya, Japan. The study was carried out by using a two-dimensional sea model integrated with one-dimensional river flow model and two-dimensional overland flow model. For the connections of models, the upstream discharge or downstream water level in each grid is considered as the boundary conditions. The governing equations used for the analysis have been solved by finite volume method. The analysis results implicate that some parts of densely populated coastal area of Nagoya city will be vulnerable to inundation if the sea level rise due to global warming by 1 m. Moreover, the performances of existing sewer system and inundation scenario under various conditions have been analyzed.     

催化氧化法处理含氨工业废气的应用探索

采用催化氧化工艺处理某化工厂的含氨工业废气,设计了一体式催化氧化脱氨设备,在物料与热量衡算的基础上,进行了脱氨性能测试和能耗分析。结果表明:工业化应用的一体式催化氧化设备在处理中浓度含氨废气时,可通过完善的可编程逻辑控制器(PLC)自动调节控制系统、高效的换热器以及智能化的前端补新风和阻火预处理装置,解决安全和能耗问题;该一体化设备具有很高的脱氨效率和经济性,处理后的废气满足GB 16297—1996《大气污染物综合排放标准》和GB 14554—1993《恶臭污染物排放标准》中的相关规定,应用前景较好。     

Development of a purpose built landfill system for the control of methane emissions from municipal solid waste

In the present paper, a new system of purpose built landfill (PBLF) has been proposed for the control of methane emissions from municipal solid waste (MSW), by considering all favourable conditions for improved methane generation in tropical climates. Based on certain theoretical considerations multivariate functional models (MFMs) are developed to estimate methane mitigation and energy generating potential of the proposed system. Comparison was made between the existing waste management system and proposed PBLF system. It has been found that the proposed methodology not only controlled methane emissions to the atmosphere but also could yield considerable energy in terms of landfill gas (LFG). Economic feasibility of the proposed system has been tested by comparing unit cost of waste disposal in conventional as well as PBLF systems. In a case study of MSW management in Mumbai (INDIA), it was found that the unit cost of waste disposal with PBLF system is seven times lesser than that of the conventional waste management system. The proposed system showed promising energy generation potential with production of methane worth of Rs. 244 millions/y ($5.2 million/y). Thus, the new waste management methodology could give an adaptable solution for the conflict between development, environmental degradation and natural resources depletion.