Simultaneous reduction of Cr(VI) and oxidation of As(III) by Bacillus firmus TE7 isolated from tannery effluent

Hexavalent chromium [Cr(VI)] and arsenite [As(III)] are the most toxic forms of chromium and arsenic respectively, and reduction of Cr(VI) to Cr(III) and oxidation of As(III) to As(V) has great environmental implications as they affect toxicity and mobility of these toxic species. Bacillus firmus strain TE7, resistant to chromium and arsenic was isolated from tannery effluent. The strain exhibited ability to reduce Cr(VI) and oxidize As(III). It reduced 100 mg L^?1 Cr(VI) within 60 h in nutrient broth and oxidized 150 mg L^?1 As(III) within 10 h in minimal medium. It also completely reduced 15 mg L^?1 Cr(VI) and oxidized 50 mg L^?1 of As(III) simultaneously in minimal medium. To the best of our knowledge, this is the first bacterial strain showing simultaneous reduction of Cr(VI) and oxidation of As(III) and is a potential candidate for bioremediation of environments contaminated with these toxic metal species.     

Hexavalent chromium reduction kinetics in rodent stomach contents

Reduction of hexavalent chromium (Cr(VI)) to trivalent chromium (Cr(III)) in the stomach prior to absorption is a well-recognized detoxification process thought to limit the toxicity of ingested Cr(VI). However, administration of high concentrations of Cr(VI) in drinking water cause mouse small intestinal tumors, and quantitative measures of Cr(VI) reduction rate and capacity for rodent stomach contents are needed for interspecies extrapolation using physiologically-based toxicokinetic (PBTK) models. Ex vivo studies using stomach contents of rats and mice were conducted to quantify Cr(VI) reduction rate and capacity for loading rates (1-400 mg Cr(VI) L⁻¹ stomach contents) in the range of recent bioassays. Cr(VI) reduction was measured with speciated isotope dilution mass spectrometry to quantify dynamic Cr(VI) and Cr(III) concentrations in stomach contents at select time points over 1 h. Cr(VI) reduction followed mixed second-order kinetics, dependent upon concentrations of both Cr(VI) and the native reducing agents. Approximately 16 mg Cr(VI)-equivalents of reducing capacity per L of fed stomach contents (containing gastric secretions, saliva, water and food) was found for both species. The second-order rate constants were 0.2 and 0.3 L mg⁻¹ h⁻¹ for mice and rats, respectively. These findings support that, at the doses that caused cancer in the mouse small intestine (?20 mg Cr(VI) L⁻¹ in drinking water), the reducing capacity of stomach contents was likely exceeded. Thus, for extrapolation of target tissue dose in risk assessment, PBTK models are necessary to account for competing kinetic rates including second order capacity-limited reduction of Cr(VI) to Cr(III).     

Accumulation and remobilization of aqueous chromium(VI) at iron oxide surfaces: Application of a thin-film continuous flow-through reactor

A thin-film continuous flow-through reactor was used to investigate reactions between aqueous Cr(VI) and two iron oxides, geothite and magnetite. Delayed effluent breakthrough of Cr(VI) indicated significant uptake by both oxides. Accumulation and remobilization of Cr(VI) depends on pH and the redox properties of the surface. For geothite the surface was quickly saturated and no further adsorption observed. Chromate anion (CrO₄²⁻) exhibited Langmuir-type adsorption. For magnetite, a significant slow steady-state rate of Cr(VI) uptake was observed. We propose two different mechanisms of chromium uptake: surface complexation of Cr(VI) species on geothite, and reductive precipitation of Cr(VI) at Fe(II) sites on magnetite.     

Trivalent chromium solubility and its influence on quantification of hexavalent chromium in ambient particulate matter using EPA method 6800

Measurement of carcinogenic Cr(VI) in ambient PM is challenging due to potential errors associated with conversion between Cr(VI) (a carcinogen) and Cr(III) (an essential nutrient). Cr(III) conversion is a particular concern due to its >80% atomic abundance in total Cr. U.S. Environmental Protection Agency (EPA) method 6800 that uses water-soluble isotope spikes can be used to correct the interconversion. However, whether the enriched Cr(III) isotope spikes can adequately mimic the Cr(III) species originally in ambient PM is unknown. This study examined the water solubility of Cr(III) in ambient PM and discussed its influence on Cr(VI) measurement. Ambient PM₁₀ samples were collected on Teflon filters at four sites in New Jersey that may have different Cr emission sources. The samples were ultrasonically extracted with 5 mL DI-H₂O (pH 5.7) at room temperature for 40 min, and then analyzed by ion chromatography–inductively coupled plasma mass spectrometry (IC-ICPMS). Cr(III) was below detection limit (0.06 ng/m³) for all samples, suggesting water-soluble Cr(III) species, such as CrCl₃, Cr(NO₃)₃, and amorphous Cr(OH)₃, in the ambient PM were negligible. Therefore, the enriched ⁵⁰Cr(III) isotope spike (in the form of Cr(NO₃)₃) could not mimic the original ambient Cr(III). Only the conversion of ⁵³Cr(VI) (in the form of K₂CrO₄) was taken into account when correcting the interconversion. We then used NaHCO₃-pretreated MCE filters (prespiked with enriched isotope species) to measure Cr(VI) in the ambient PM₁₀. The samples were ultrasonically extracted at 60 C pH 9 solutions for 40 min followed by IC-ICPMS analysis. Due to the correction of Cr(VI) reduction, the Cr(VI) concentrations determined by EPA method 6800, 0.26 ± 0.16 (summer) and 0.16 ± 0.11(winter) ng/m³ (n = 64), were significantly greater than those by the external standard curve, 0.21 ± 0.17 (summer) and 0.10 ± 0.07 (winter) ng/m³ (n = 56) (p < 0.01, Student’s t-test). Our study revealed that appropriate application of EPA method 6800 is important because it only applies to soluble fraction of Cr species in ambient PM.

ImplicationsAccurate measurement of carcinogenic Cr(VI) in ambient PM is challenging due to conversion between Cr(VI) (a human carcinogen) and Cr(III) (a human essential nutrient). The conversion of Cr(III) is of particular concern due to its dominant presence in total Cr (>80%). This study examined the water solubility of Cr(III) in ambient PM that was collected at four locations in New Jersey. Then we discussed the influence of Cr(III) solubility on the application of EPA method 6800, which utilizes enriched isotope spikes to correct the interconversion. Our results suggested that appropriate application of EPA method 6800 is important because it only applies to soluble fraction of Cr species.     

Chromium accumulation by the hyperaccumulator plant Leersia hexandra Swartz

Leersia hexandra Swartz (Gramineae), which occurs in Southern China, has been found to be a new chromium hyperaccumulator by means of field survey and pot-culture experiment. The field survey showed that this species had an extraordinary accumulation capacity for chromium. The maximum Cr concentration in the dry leaf matter was 2978 mg kg(-1) on the side of a pond near an electroplating factory. The average concentration of chromium in the leaves was 18.86 times as that in the pond sediment, and 297.41 times as that in the pond water. Under conditions of the nutrient solution culture, it was found that L. hexandra had a high tolerance and accumulation capacity to Cr(III) and Cr(VI). Under 60 mg l(-1) Cr(III) and 10 mg l(-1) Cr(VI) treatment, there was no significant decrease of biomass in the leaves of L. hexandra (p>0.05). The highest bioaccumulation coefficients of the leaves for Cr(III) and Cr(VI) were 486.8 and 72.1, respectively. However, L. hexandra had a higher accumulation capacity for Cr(III) than for Cr(VI). At the Cr(III) concentration of 10 mg l(-1) in the culture solution, the concentration of chromium in leaves was 4868 mg kg(-1), while at the same Cr(VI) concentration, the concentration of chromium in leaves was only 597 mg kg(-1). These results confirmed that L. hexandra is a chromium hyperaccumulator which grows rapidly with a great tolerance to Cr and broad ecological amplitude. This species could provide a new plant resource that explores the mechanism of Cr hyperaccumulation, and has potential for usage in the phytoremediation of Cr-contaminated soil and water.     

Biogeochemical influence on transport of chromium in manganese sediments: experimental and modeling approaches

Hexavalent chromium (Cr(VI)) was reduced to immobile and nontoxic Cr(III) by a dissimilatory metal reducing bacteria, Shewanella alga Simidu (BrY-MT) ATCC 55627. A series of kinetic batch and dynamic column experiments were conducted to provide an understanding of Cr(VI) reduction by the facultative anaerobe BrY-MT. Reduction of Cr(VI) was rapid (within 1 h) in columns packed with quartz sand and bacteria, whereas Cr(VI) reduction by BrY-MT was delayed (57 h) in the presence of beta-MnO2-coated sand. A mathematical model was developed and evaluated against data obtained from column experiments. The model takes into account (1) advective-dispersive transport of Cr(III), Cr(VI), lactate, and protein (mobile and immobile bacteria); (2) first-order kinetic adsorption of Cr(III) and lactate; (3) conversion of solid phase beta-MnO2 to solid phase MnOOH due to oxidation of Cr(III); (4) dual-Monod kinetics, where Cr(VI) is the electron acceptor and lactate is the electron donor. The breakthrough data for Cr(III), Cr(VI), lactate, and protein (mobile and immobile bacteria) were fitted simultaneously. The breakthrough data are well described by the mathematical model that considers the above processes. This result demonstrates the ability of the coupled hydrobiogeochemical model to simulate chromium transport in complex reactive systems.     

Multispecies transport of metal–EDTA complexes and chromate through undisturbed columns of weathered fractured saprolite

Laboratory-scale tracer experiments were conducted to investigate the geochemical and hydrological processes that govern the fate and transport of organically chelated radionuclides and toxic metals in undisturbed saturated columns of weathered, fractured shale saprolite. Three long-term, reactive contaminant injections were pulsed onto three separate soil columns, with the following influent mixtures: (1) ¹⁰⁹CdEDTA²⁻, (2) ¹⁰⁹CdEDTA²⁻ and ^57,58Co(II)EDTA²⁻, and (3) ¹⁰⁹CdEDTA²⁻, ⁵⁷Co(III)EDTA⁻, and H⁵¹CrO₄⁻. Both single and multiple species experiments were conducted to determine the importance of interaction between the contaminants and competition for surface sites. Flow interruption was used to identify physical and chemical non-equilibrium (PNE and CNE) which were caused by multiple pore-region flow and rate-limited chemical reactions, respectively. Reactive contaminant transport through the fractured, weathered shale was affected by sorption, redox, and dissociation reactions, which were mediated by soil organic matter and surficial oxides of Fe, Mn, and Al. The transport of CdEDTA²⁻ was significantly influenced by ligand-promoted dissolution of subsurface Fe and Al sources, resulting in the liberation of Cd²⁺, Al(III)EDTA⁻ and Fe(III)EDTA⁻. Flow interruption confirmed that the surface-mediated dissociation reaction was time-dependent, with the stability of the CdEDTA²⁻ complex dependent on its residence time within the soil. The migration of Co(II)EDTA²⁻ was dominated by oxidization to the highly stable Co(III)EDTA⁻ species, and elevated effluent Mn²⁺ suggested that surficial Mn(IV) oxides likely catalyzed the redox reaction, though Fe-oxides may have also contributed to the reaction. Dissociation (12%) of the Co(II)EDTA²⁻ complex was first observed during flow interruption, indicating that rate-limited dissociation of the complex by Fe-oxides may be significant under equilibrium conditions. The transport of HCrO₄⁻ was significantly altered by the reduction of mobile Cr(VI) to irreversibly bound Cr(III). The reduction reaction was catalyzed by surface-bound natural organic matter and flow interruption confirmed that the reaction was time-dependent. There was little evidence of competitive effects between the various contaminants in the multispecies experiments, since each was influenced by a different geochemical process during transport through the soil. The results of this study further support research findings that suggest anionic toxic metals and radionuclide–organic complexes can be significantly influenced by soil geochemical processes that can both enhance and impede the subsurface migration of these contaminants.     

Impact of the Saharan dust outbreaks on the ambient levels of total suspended particles (TSP) in the marine boundary layer (MBL) of the Subtropical Eastern North Atlantic Ocean

Six years (1998–2003) of measurements of ambient air concentrations of total suspended particulate (TSP) measured at a rural background monitoring station in Tenerife (Canary Islands), the El Río station (ER, 28°08′35″N, 16°39′20″W, 500 m a.s.l.) were studied. African dust outbreaks were objectively identified using a new quantitative tool, called the African Index. This index indicates the percentage of time that an air mass remained over an African region at one of three possible height intervals of the lower troposphere. After identifying these episodes, a study of the background TSP levels at the ER station and of direct and indirect (those which cause vertical deposition of dust) African air mass intrusion impacts was performed. Taking into account both direct and indirect episodes, a total of 322 days of African dust intrusion were objectively identified (a mean of 54 episodes per year) in the period 1998–2003, some of them caused by “transition episodes” or “return African air masses”. A subjective method confirmed that 256 of these days were caused by direct impacts of African dust on the ER station. A mean TSP value of 21.6 μg m⁻³ was found at the station during this period. All the episodes occurred when the TSP concentration was >28.5 μg m⁻³. The TSP background (14 μg m⁻³) can be assumed to be representative of the MBL of the Eastern North Atlantic subtropical region. The highest number of dust gravitational settlement (or indirect) episodes occurs in summer, but the highest contribution of these episodes to the TSP levels is in March with a monthly mean TSP contribution of up to 30.5 μg m⁻³.     

Association of the mutagenicity of airborne particles with the direct emission from combustion processes investigated in Osaka, Japan

The association of the direct-acting mutagenicity of soluble organic fraction of airborne particles toward Salmonella typhimurium YG1024 strain with the direct emission was investigated at a roadside and at a residential area in Osaka, Japan. The direct-acting mutagenicity was evaluated as mutagenic activity per unit volume of ambient air (rev m⁻³) and/or that per airborne particulate weight collected on a filter (rev mg⁻¹). The annual or diurnal changes of the mutagenicity of airborne particles at the residential site showed similar patterns to those of some gaseous pollutants such as NO₂ and SO₂, which were emitted from combustion processes. This result indicates that the mutagenicity is mainly attributable to the primary emissions. From the analysis of the relationship between the wind sector and the mutagenic intensity, rev m⁻³ and rev mg⁻¹ values were strongly affected by the emissions from the fixed sources and from the mobile sources, respectively. The rev m⁻³ value and concentration of 1-nitropyrene (1-NP) in unit per m³ at the roadside were a factor of 2.6 and 2.8 higher than those at the residential site, respectively, but the rev mg⁻¹ value and concentration of 1-NP in unit per mg at the roadside were substantially comparable to those at the residential area. These observations suggest that the characteristics of the airborne particles can be attributed to the automotive emissions even at the suburban area.     

Graphical estimation of the dual-enzyme kinetic parameters for Cr(VI) reduction

Chromium(VI) (Cr(VI)) contamination of soil and groundwater is a major environmental concern. Bioreduction of Cr(VI) by Shewanella oneidensis MR-1 (MR-1) can be considered a feasible option to reduce the toxic and mobile Cr(VI) to the less toxic and less mobile chromium(III) (Cr(III)). The reaction rate expression for Cr(VI) reduction is nonlinear and the rate constants are evaluated by employing nonlinear optimization techniques. The outcome of the optimization techniques, in general, depends on the initial estimate of the kinetic parameters which is not always available. A graphical approach based on sound mathematical reasoning has been developed which is accurate, simpler to use, and can provide the best initial estimate for nonlinear optimization.     

Chromium species behaviour in the activated sludge process

The purpose of this research was to compare trivalent chromium (Cr(III)) and hexavalent chromium (Cr(VI)) removal by activated sludge and to investigate whether Cr(VI) reduction and/or Cr(III) oxidation occurs in a wastewater treatment system. Chromium removal by sludge harvested from sequencing batch reactors, determined by a series of batch experiments, generally followed a Freundlich isotherm model. Almost 90% of Cr(III) was adsorbed on the suspended solids while the rest was precipitated at pH 7.0. On the contrary, removal of Cr(VI) was minor and did not exceed 15% in all experiments under the same conditions. Increase of sludge age reduces Cr(III) removal, possibly because of Cr(III) sorption on slime polymers. Moreover, the decrease of suspended solids concentration and the acclimatization of biomass to Cr(VI) reduced the removal efficiency of Cr(III). Batch experiments showed that Cr(III) cannot be oxidized to Cr(VI) by activated sludge. On the contrary, Cr(VI) reduction is possible and is affected mainly by the initial concentration of organic substrate, which acts as electron donor for Cr(VI) reduction. Initial organic substrate concentration equal to or higher than 1000 mgl(-1) chemical oxygen demand permitted the nearly complete reduction of 5 mgl(-1) Cr(VI) in a 24-h batch experiment. Moreover, higher Cr(VI) reduction rates were obtained with higher Cr(VI) initial concentrations, expressed in mg Cr(VI) g(-1) VSS, while decrease of suspended solids concentration enhanced the specific Cr(VI) reduction rate.     

Terrestrial and aquatic ecotoxicity assessment of Cr(VI) by the ReCiPe method calculation (LCIA): application on an old industrial contaminated site

The most stable forms of chromium in the environment are chromium (III) and chromium (VI), the former being relatively immobile and necessary for organisms, and the latter being highly soluble and toxic. It is thus important to characterise ecotoxicological impacts of Cr(VI). However, there are still some important uncertainties in the calculation of ecotoxicological impacts of heavy metals in the LCIA global approach. The aim of this paper is to understand how the spatial and dynamic characterization of life cycle inventory (LCI) data can be exploited in life cycle impact assessment and particularly for the evaluation of the aquatic and terrestrial ecotoxicity of Cr(VI). To quantify these impacts, we studied an industrial waste landfill in the North of France that was contaminated with chromium. On the polluted area, the aquatic contamination is due to the slag heap as well as to chromium spots in soil. The soil contamination is mainly due to infiltration of chromium from the infill. The concentration of Cr(VI) in soil and water varies according to seasonal climatic variations and groundwater level. These variations have an effect on the Cr(VI) fate factor, in particular on transfer and residence time of the substance. This study underlines the spatial distribution of aquatic ecotoxicity and the temporal variation of freshwater ecotoxicity. We analysed the correlation between precipitation, temperature, concentration and ecotoxicity impact. With regards to the terrestrial ecotoxicity, the study focused on the vertical variation of the ecotoxicity and the major role of the soil layer composition into terrestrial pollution.     

Long-term variation of PM2.5 levels and composition at rural, urban, and roadside sites in Hong Kong: Increasing impact of regional air pollution

Long-term study of air pollution plays a decisive role in formulating and refining pollution control strategies. In this study, two 12-month measurements of PM_2.5 mass and speciation were conducted in 00/01 and 04/05 to determine long-term trend and spatial variations of PM_2.5 mass and chemical composition in Hong Kong. This study covered three sites with different land-use characteristics, namely roadside, urban, and rural environments. The highest annual average PM_2.5 concentration was observed at the roadside site (58.0±2.0 μg m⁻³ (average±2σ) in 00/01 and 53.0±2.7 μg m⁻³ in 04/05), followed by the urban site (33.9±2.5 μg m⁻³ in 00/01 and 39.0±2.0 μg m⁻³ in 04/05), and the rural site (23.7±1.9 μg m⁻³ in 00/01 and 28.4±2.4 μg m⁻³ in 04/05). The lowest PM_2.5 level measured at the rural site was still higher than the United States’ annual average National Ambient Air Quality Standard of 15 μg m⁻³. As expected, seasonal variations of PM_2.5 mass concentration at the three sites were similar: higher in autumn/winter and lower in summer. Comparing PM_2.5 data in 04/05 with those collected in 00/01, a reduction in PM_2.5 mass concentration at the roadside (8.7%) but an increase at the urban (15%) and rural (20%) sites were observed. The reduction of PM_2.5 at the roadside was attributed to the decrease of carbonaceous aerosols (organic carbon and elemental carbon) (>30%), indicating the effective control of motor vehicle emissions over the period. On the other hand, the sulfate concentration at the three sites was consistent regardless of different land-use characteristics in both studies. The lack of spatial variation of sulfate concentrations in PM_2.5 implied its origin of regional contribution. Moreover, over 36% growth in sulfate concentration was found from 00/01 to 04/05, suggesting a significant increase in regional sulfate pollution over the years. More quantitative techniques such as receptor models and chemical transport models are required to assess the temporal variations of source contributions to ambient PM_2.5 mass and chemical speciation in Hong Kong.     

交换电极法强化电动修复铬污染土壤

pH值是影响污染土壤电动修复的主要因素。为此提出了交换电极法强化电动修复,并对该技术进行了实验研究。实验土壤Cr污染浓度为506.36 mg/kg,工作电压为1 V/cm,结果显示,固定电极方向运行模式下,运行2 d,产生聚焦效应,运行8 d,碱性区Cr(III)残留量和酸性区Cr(VI)残留量较大,分别是97.88 mg/kg和328 mg/kg,总铬去除率为59.04%。采用交换电极法,交换频率为4 d,运行8 d,总铬去除率为70.18%;交换频率为2 d,运行8 d,总铬去除率高达86.10%,土壤中总铬平均含量从506.36 mg/kg降至73.56 mg/kg,达到酸性土壤环境质量一级标准。该技术可控制土壤pH值在中性范围,电流密度高,不添加化学试剂,操作简单。     

Species-dependent chromium accumulation, lipid peroxidation, and glutathione levels in germinating kiwifruit pollen under Cr(III) and Cr(VI) stress

The accumulation of chromium by germinating kiwifruit pollen appears to be significantly affected by Cr species, Cr concentration and calcium availability. Cr(III) accumulation always occurred in a linear manner while Cr(VI) uptake followed a logarithmic model. In the absence of exogenous calcium, Cr(III) accumulation was much higher than that of Cr(VI). It was observed that, as the Cr(III) concentration increased, there was a significant decrease in the endogenous calcium content of pollen, ultimately leading to complete calcium depletion after 90 min of incubation at 150 microM Cr(III). This loss of calcium could be responsible for the strong inhibition of tube emergence and growth following exposure of pollen to Cr(III). Indeed, when exogenous calcium was added to the kiwifruit pollen culture medium, significant growth recovery and reduced Cr(III) uptake occurred; the opposite was true in Cr(VI)-treatments. A significant rise in lipid peroxide production occurs in the presence of both Cr species; the effect was more pronounced following Cr(VI) exposure. Finally, glutathione pool dynamics appears to be differentially affected by chromium species and concentrations. In conclusion, results of the present study have provided important information regarding the different activity profiles of Cr(III) and Cr(VI) in relation to kiwifruit pollen performance, and have also demonstrated differences in some biochemical responses of pollen to metal stress.     

Vermicomposting as an advanced biological treatment for industrial waste from the leather industry

The leather industry (tanneries) generates high amounts of toxic wastes, including solid and liquid effluents that are rich in organic matter and mineral content. Vermicomposting was studied as an alternative method of treating the wastes from tanneries. Vermicompost was produced from the following tannery residues: tanned chips of wet-blue leather, sludge from a liquid residue treatment station, and a mixture of both. Five hundred earthworms (Eisenia fetida) were added to each barrel. During the following 135 days the following parameters were evaluated: pH, total organic carbon (TOC), organic matter (OM), cation exchange capacity (CEC), C:N ratio, and chromium content as Cr (III) and Cr (VI). The results for pH, TOC and OM contents showed decreases in their values during the composting process, whereas values for CEC and total nitrogen rose, indicating that the vermicompost reached maturity. For chromium, at 135 days, all values of Cr (VI) were below the detectable level. Therefore, the Cr (VI) content had probably been biologically transformed into Cr (III), confirming the use of this technique as an advanced biological treatment. The study reinforces the idea that vermicomposting could be introduced as an effective technology for the treatment of industrial tannery waste and the production of agricultural inputs.     

A global assessment of chromium pollution using sperm whales (Physeter macrocephalus) as an indicator species

Chromium (Cr) is a well-known human carcinogen and a potential reproductive toxicant, but its contribution to ocean pollution is poorly understood. The aim of this study was to provide a global baseline for Cr as a marine pollutant using the sperm whale (Physeter macrocephalus) as an indicator species. Biopsies were collected from free-ranging whales around the globe during the voyage of the research vessel The Odyssey. Total Cr levels were measured in 361 sperm whales collected from 16 regions around the globe detectable levels ranged from 0.9 to 122.6 μg Cr g tissue⁻¹ with a global mean of 8.8 ± 0.9 μg g⁻¹. Two whales had undetectable levels. The highest levels were found in sperm whales sampled in the waters near the Islands of Kiribati in the Pacific (mean = 44.3 ± 14.4) and the Seychelles in the Indian Ocean (mean = 19.5 ± 5.4 μg g⁻¹). The lowest mean levels were found in whales near the Canary Islands (mean = 3.7 ± 0.8 μg g⁻¹) and off of the coast of Sri Lanka (mean = 3.3 ± 0.4 μg g⁻¹). The global mean Cr level in whale skin was 28-times higher than mean Cr skin levels in humans without occupational exposure. The whale levels were more similar to levels only observed previously in human lung tissue from workers who died of Cr-induced lung cancer. We conclude that Cr pollution in the marine environment is significant and that further study is urgently needed.     

Ageing of chromium(III)-bearing slag and its relation to the atmospheric oxidation of solid chromium(III)-oxide in the presence of calcium oxide

Slag arising in ferrochromium and stainless steel production is known to contain residual levels of trivalent chromium. As the chromium is normally bound in the slag matrix in various silicate or spinel phases, and hence not easily mobilised, utilisation or controlled disposal of such slag is generally considered unproblematic. Experimental test work with a number of slag materials indicates, however, that very gradual oxidation of trivalent to hexavalent chromium does occur when the slag is exposed to atmospheric oxygen, rendering a quantifiable but small portion of chromium in this much more mobile and toxic form. Mechanisms and rates of the oxidation reaction were investigated in a number of long-term studies using both original slag materials and artificial mixes of chromium and calcium oxides. Powders of these materials, some of them rolled into balls, were left to age under different conditions for periods of up to 12 months. In the slag samples, which contained between 1 and 3 wt.% chromium, 1000–10 000 μg Cr(VI) were found per gram of chromium within 6–9 months of exposure to an ambient atmosphere. The rate of the oxidation reaction decreased exponentially, and the reaction could generally be said to have ceased within 12 months. In mixtures of calcium and chromium oxides the oxidation reaction is presumed to occur at the boundaries between chromium oxide and calcium oxide phases through diffusion of oxygen along the grain boundaries and of Cr³⁺ across the boundaries, resulting in the formation of calcium chromate. In the slags, where calcium and chromium oxide can form a solid solution, the oxidation is likely to occur at the exposed surface of grains containing this solution.     

Chromium (VI) remediation in aqueous solution by waste products (peel and seed) of mango (Mangifera indica L.) cultivars

The surface group characteristics of mango cultivar peels and seeds were evaluated by infrared spectra, PZC, and functional group composition. The adsorption/reduction of chromium (VI) in aqueous solutions was investigated by varying pH, contact time, initial Cr(VI) concentration, and adsorbent amount. The results show that both peel and seed powders of the mango cultivars showed significant adsorption/reduction capacity for Cr(VI) and that the desorption process obeys pseudo-second-order kinetics. Optimal adsorption occurred at pH 1.0, using a Cr(VI) concentration of 100 mg/L. On average, at pH 1.0, and a concentration of 3 g/L, the maximum adsorption/reduction capacity of Cr(VI) was 83% (peels 76%, seeds 90%). Of the mango powders tested, the most efficient were Tommy seed (100%) and Coite peel (98%) followed by Coite seed (96%) and Tommy peel powders (95%). The adsorption/reduction of Cr(VI) was complete (100%) by the mango seed, in comparison to the peel powders (97%) after 180 min. The data indicates that mango waste products, such as seed and peel powders, are both excellent candidates for the remediation of Cr(VI) from aqueous systems and due to the higher concentration of gallates and galloyl glucosides, the mango seed powders should be the powders of choice for future remediation projects.

     

Chromium transport, oxidation, and adsorption in manganese-coated sand

We examine how the processes of advection, dispersion, oxidation-reduction, and adsorption combine to affect the transport of chromium through columns packed with pyrolusite (beta-MnO2)-coated sand. We find that beta-MnO2 effectively oxidizes Cr(III) to Cr(VI) and that the extent of oxidation is sensitive to changes in pH, pore water velocity, and influent concentrations of Cr(III). Cr(III) oxidation rates, although initially high, decline well before the supply of beta-MnO2 is depleted, suggesting that a reaction product inhibits the conversion of Cr(III) to Cr(VI). Rate-limited reactions govern the weak adsorption of each chromium species, with Cr(III) adsorption varying directly with pH and Cr(VI) adsorption varying inversely with pH. The breakthrough data on chromium transport can be matched closely by calculations of a simple model that accounts for (1) advective-dispersive transport of Cr(III), Cr(VI), and dissolved oxygen, (2) first-order kinetics adsorption of the reduced and oxidized chromium species, and (3) nonlinear rate-limited oxidation of Cr(III) to Cr(VI). Our work supplements the limited database on the transport of redox-sensitive metals in porous media and provides a means for quantifying the coupled processes that contribute to this transport.